Merge tag 'v4.14-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "second round of Rockchip dts32 changes for 4.14" from Heiko Stübner:

A lot of attention for the rv1108 soc targetted at media-processing
(usb, operating points, spi, pwm, adc, watchdog, i2c and devices for
its evb).

RK3228/3229 gets iommu and spi nodes. Similar to the rk3288 which
also gets some more iommu nodes as well as getting converted to 64
bit addresses due to wanting to address more than 4GB of memory
via LPAE.

* tag 'v4.14-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: enable usb for rv1108-evb
  ARM: dts: rockchip: add usb nodes for rv1108 SoCs
  dt-bindings: update grf-binding for rv1108 SoCs
  ARM: dts: rockchip: add cpu power supply for rv1108 evb
  ARM: dts: rockchip: add cpu opp table for rv1108
  ARM: dts: rockchip: add rk322x iommu nodes
  ARM: dts: rockchip: add accelerometer bma250e dt node for rv1108 evb
  ARM: dts: rockchip: add pmic rk805 dt node for rv1108 evb
  ARM: dts: rockchip: add pwm backlight for rv1108 evb
  ARM: dts: rockchip: add pwm dt nodes for rv1108
  ARM: dts: rockchip: add spi dt node for rv1108
  ARM: dts: rockchip: add saradc support for rv1108
  ARM: dts: rockchip: add watchdog dt node for rv1108
  ARM: dts: rockchip: add i2c dt nodes for rv1108
  clk: rockchip: fix up indentation of some RV1108 clock-ids
  clk: rockchip: rename the clk id for HCLK_I2S1_2CH
  clk: rockchip: add more clk ids for rv1108
  ARM: dts: rockchip: add more iommu nodes on rk3288
  ARM: dts: rockchip: convert rk3288 device tree files to 64 bits
  ARM: dts: rockchip: add spi node and spi pinctrl on rk3228/rk3229

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 186 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
index 58ee0fbc51f1..86a57f823616 100644
--- a/arch/arm/boot/dts/rv1108-evb.dts
+++ b/arch/arm/boot/dts/rv1108-evb.dts
@@ -54,12 +54,186 @@
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <200>;
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_core>;
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <275>;
+	i2c-scl-falling-time-ns = <16>;
+	clock-frequency = <400000>;
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
+		rockchip,system-power-controller;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+
+		regulators {
+			vdd_core: DCDC_REG1 {
+				regulator-name= "vdd_core";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-state-enabled;
+					regulator-state-uv = <900000>;
+				};
+			};
+
+			vdd_cam: DCDC_REG2 {
+				regulator-name= "vdd_cam";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-state-mem {
+					regulator-state-disabled;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name= "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-state-enabled;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name= "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-state-enabled;
+					regulator-state-uv = <3300000>;
+				};
+			};
+
+			vdd_10: LDO_REG1 {
+				regulator-name= "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-state-disabled;
+				};
+			};
+
+			vcc_18: LDO_REG2 {
+				regulator-name= "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-state-disabled;
+				};
+			};
+
+			vdd10_pmu: LDO_REG3 {
+				regulator-name= "vdd10_pmu";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-state-enabled;
+					regulator-state-uv = <1000000>;
+				};
+			};
+		};
+	};
+
+	bma250: accelerometer@19 {
+		compatible = "bosch,bma250e";
+		reg = <0x19>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB3 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pwm0 {
+	status = "okay";
 };
 
 &sdmmc {
 	status = "okay";
 };
 
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "okay";
+	};
+};
+
 &uart0 {
 	status = "okay";
 };
@@ -71,3 +245,15 @@
 &uart2 {
 	status = "okay";
 };
+
+&usb_host_ehci {
+	status = "okay";
+};
+
+&usb_host_ohci {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};