Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: global cleanups" from Arnd Bergmann:
 "Quite a bit of code gets removed, and some stuff moved around, mostly
  the old samsung s3c24xx stuff.  There should be no functional changes
  in this series otherwise.  Some cleanups have dependencies on other
  arm-soc branches and will be sent in the second round.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>"

Fixed up trivial conflicts mainly due to #include's being changes on
both sides.

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (121 commits)
  ep93xx: Remove unnecessary includes of ep93xx-regs.h
  ep93xx: Move EP93XX_SYSCON defines to SoC private header
  ep93xx: Move crunch code to mach-ep93xx directory
  ep93xx: Make syscon access functions private to SoC
  ep93xx: Configure GPIO ports in core code
  ep93xx: Move peripheral defines to local SoC header
  ep93xx: Convert the watchdog driver into a platform device.
  ep93xx: Use ioremap for backlight driver
  ep93xx: Move GPIO defines to gpio-ep93xx.h
  ep93xx: Don't use system controller defines in audio drivers
  ep93xx: Move PHYS_BASE defines to local SoC header file
  ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver
  ARM: EXYNOS: add clock registers for exynos4x12-cpufreq
  PM / devfreq: update the name of EXYNOS clock registers that were omitted
  PM / devfreq: update the name of EXYNOS clock register
  ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock
  ARM: EXYNOS: use static declaration on regarding clock
  ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs
  ARM: OMAP2+: Fix build error after merge
  ARM: S3C24XX: remove call to s3c24xx_setup_clocks
  ...

1 files changed, 0 insertions, 154 deletions

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 5261a7ed0999..68d89cb96af0 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -2,42 +2,6 @@
 #
 # Licensed under GPLv2
 
-config CPU_S3C2410
-	bool
-	depends on ARCH_S3C2410
-	select CPU_ARM920T
-	select S3C2410_CLOCK
-	select CPU_LLSERIAL_S3C2410
-	select S3C2410_PM if PM
-	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
-	help
-	  Support for S3C2410 and S3C2410A family from the S3C24XX line
-	  of Samsung Mobile CPUs.
-
-config CPU_S3C2410_DMA
-	bool
-	depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
-	default y if CPU_S3C2410 || CPU_S3C2442
-	help
-	  DMA device selection for S3C2410 and compatible CPUs
-
-config S3C2410_PM
-	bool
-	help
-	  Power Management code common to S3C2410 and better
-
-config SIMTEC_NOR
-	bool
-	help
-	  Internal node to specify machine has simtec NOR mapping
-
-config MACH_BAST_IDE
-	bool
-	select HAVE_PATA_PLATFORM
-	help
-	  Internal node for machines with an BAST style IDE
-	  interface
-
 # cpu frequency scaling support
 
 config S3C2410_CPUFREQ
@@ -54,121 +18,3 @@ config S3C2410_PLLTABLE
 	help
 	  Select the PLL table for the S3C2410
 
-menu "S3C2410 Machines"
-
-config ARCH_SMDK2410
-	bool "SMDK2410/A9M2410"
-	select CPU_S3C2410
-	select MACH_SMDK
-	help
-	   Say Y here if you are using the SMDK2410 or the derived module A9M2410
-           <http://www.fsforth.de>
-
-config ARCH_H1940
-	bool "IPAQ H1940"
-	select CPU_S3C2410
-	select PM_H1940 if PM
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	select S3C2410_SETUP_TS
-	help
-	  Say Y here if you are using the HP IPAQ H1940
-
-config H1940BT
-        tristate "Control the state of H1940 bluetooth chip"
-        depends on ARCH_H1940
-        select RFKILL
-        help
-          This is a simple driver that is able to control
-          the state of built in bluetooth chip on h1940.
-
-config PM_H1940
-	bool
-	help
-	  Internal node for H1940 and related PM
-
-config MACH_N30
-	bool "Acer N30 family"
-	select CPU_S3C2410
-	select MACH_N35
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you want suppt for the Acer N30, Acer N35,
-	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
-
-config MACH_N35
-	bool
-	help
-	  Internal node in order to enable support for Acer N35 if Acer N30 is
-	  selected.
-
-config ARCH_BAST
-	bool "Simtec Electronics BAST (EB2410ITX)"
-	select CPU_S3C2410
-	select S3C2410_IOTIMING if S3C2410_CPUFREQ
-	select PM_SIMTEC if PM
-	select SIMTEC_NOR
-	select MACH_BAST_IDE
-	select S3C24XX_DCLK
-	select ISA
-	select S3C_DEV_HWMON
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the Simtec Electronics EB2410ITX
-	  development board (also known as BAST)
-
-config MACH_OTOM
- 	bool "NexVision OTOM Board"
- 	select CPU_S3C2410
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
- 	  Say Y here if you are using the Nex Vision OTOM board
-
-config MACH_AML_M5900
-	bool "AML M5900 Series"
-	select CPU_S3C2410
-	select PM_SIMTEC if PM
-	select S3C_DEV_USB_HOST
-	help
-	   Say Y here if you are using the American Microsystems M5900 Series
-           <http://www.amltd.com>
-
-config BAST_PC104_IRQ
-	bool "BAST PC104 IRQ support"
-	depends on ARCH_BAST
-	default y
-	help
-	  Say Y	here to enable the PC104 IRQ routing on the
-	  Simtec BAST (EB2410ITX)
-
-config MACH_TCT_HAMMER
-	bool "TCT Hammer Board"
-	select CPU_S3C2410
-	select S3C_DEV_USB_HOST
-	help
-	   Say Y here if you are using the TinCanTools Hammer Board
-           <http://www.tincantools.com>
-
-config MACH_VR1000
-	bool "Thorcom VR1000"
-	select PM_SIMTEC if PM
-	select S3C24XX_DCLK
-	select SIMTEC_NOR
-	select MACH_BAST_IDE
-	select CPU_S3C2410
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Thorcom VR1000 board.
-
-config MACH_QT2410
-	bool "QT2410"
-	select CPU_S3C2410
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	   Say Y here if you are using the Armzone QT2410
-
-endmenu