Merge tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "This is the bulk of new SoC enablement and other platform changes for
  3.17:

   - Samsung S5PV210 has been converted to DT and multiplatform
   - Clock drivers and bindings for some of the lower-end i.MX 1/2
     platforms
   - Kirkwood, one of the popular Marvell platforms, is folded into the
     mvebu platform code, removing mach-kirkwood
   - Hwmod data for TI AM43xx and DRA7 platforms
   - More additions of Renesas shmobile platform support
   - Removal of plat-samsung contents that can be removed with S5PV210
     being multiplatform/DT-enabled and the other two old platforms
     being removed

  New platforms (most with only basic support right now):

   - Hisilicon X5HD2 settop box chipset is introduced
   - Mediatek MT6589 (mobile chipset) is introduced
   - Broadcom BCM7xxx settop box chipset is introduced

  + as usual a lot other pieces all over the platform code"

* tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits)
  ARM: hisi: remove smp from machine descriptor
  power: reset: move hisilicon reboot code
  ARM: dts: Add hix5hd2-dkb dts file.
  ARM: debug: Rename Hi3716 to HIX5HD2
  ARM: hisi: enable hix5hd2 SoC
  ARM: hisi: add ARCH_HISI
  MAINTAINERS: add entry for Broadcom ARM STB architecture
  ARM: brcmstb: select GISB arbiter and interrupt drivers
  ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs
  ARM: configs: enable SMP in bcm_defconfig
  ARM: add SMP support for Broadcom mobile SoCs
  Documentation: arm: misc updates to Marvell EBU SoC status
  Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC
  ARM: mvebu: fix build without platforms selected
  ARM: mvebu: add cpuidle support for Armada 38x
  ARM: mvebu: add cpuidle support for Armada 370
  cpuidle: mvebu: add Armada 38x support
  cpuidle: mvebu: add Armada 370 support
  cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7
  ARM: mvebu: export the SCU address
  ...

1 files changed, 2 insertions, 141 deletions

diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 6910c8669742..c87aefbf3a13 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -6,30 +6,16 @@
 
 config PLAT_SAMSUNG
 	bool
-	depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P || ARCH_EXYNOS
+	depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_EXYNOS || ARCH_S5PV210
 	default y
 	select GENERIC_IRQ_CHIP
 	select NO_IOPORT_MAP
 	help
 	  Base platform code for all Samsung SoC based systems
 
-config PLAT_S5P
-	bool
-	depends on ARCH_S5PV210
-	default y
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_VIC
-	select NO_IOPORT_MAP
-	select PLAT_SAMSUNG
-	select S3C_GPIO_TRACK
-	select S5P_GPIO_DRVSTR
-	select SAMSUNG_CLKSRC if !COMMON_CLK
-	help
-	  Base platform code for Samsung's S5P series SoC.
-
 config SAMSUNG_PM
 	bool
-	depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || S5P_PM)
+	depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX)
 	default y
 	help
 	  Base platform power management code for samsung code
@@ -65,48 +51,6 @@ config SAMSUNG_ATAGS
 
 if SAMSUNG_ATAGS
 
-# clock options
-
-config SAMSUNG_CLOCK
-	bool
-	default y if !COMMON_CLK
-
-config SAMSUNG_CLKSRC
-	bool
-	help
-	  Select the clock code for the clksrc implementation
-	  used by newer systems such as the S3C64XX.
-
-config S5P_CLOCK
-	def_bool ARCH_S5PV210
-	help
-	  Support common clock part for ARCH_S5P and ARCH_EXYNOS SoCs
-
-# options for IRQ support
-
-config S5P_IRQ
-	def_bool ARCH_S5PV210
-	help
-	  Support common interrupt part for ARCH_S5P SoCs
-
-config S5P_EXT_INT
-	bool
-	help
-	  Use the external interrupts (other than GPIO interrupts.)
-
-config S5P_GPIO_INT
-	bool
-	help
-	  Common code for the GPIO interrupts (other than external interrupts.)
-
-# options for gpio configuration support
-
-config S5P_GPIO_DRVSTR
-	bool
-	help
-	  Internal configuration to get and set correct GPIO driver strength
-	  helper
-
 config S3C_GPIO_SPACE
 	int "Space between gpio banks"
 	default 0
@@ -122,12 +66,6 @@ config S3C_GPIO_TRACK
 	  Internal configuration option to enable the s3c specific gpio
 	  chip tracking if the platform requires it.
 
-# uart options
-
-config S5P_DEV_UART
-	def_bool y
-	depends on ARCH_S5PV210
-
 # ADC driver
 
 config S3C_ADC
@@ -285,66 +223,6 @@ config SAMSUNG_DEV_BACKLIGHT
 	help
 	  Compile in platform device definition LCD backlight with PWM Timer
 
-config S5P_DEV_CSIS0
-	bool
-	help
-	  Compile in platform device definitions for MIPI-CSIS channel 0
-
-config S5P_DEV_CSIS1
-	bool
-	help
-	  Compile in platform device definitions for MIPI-CSIS channel 1
-
-config S5P_DEV_FIMC0
-	bool
-	help
-	  Compile in platform device definitions for FIMC controller 0
-
-config S5P_DEV_FIMC1
-	bool
-	help
-	  Compile in platform device definitions for FIMC controller 1
-
-config S5P_DEV_FIMC2
-	bool
-	help
-	  Compile in platform device definitions for FIMC controller 2
-
-config S5P_DEV_FIMC3
-	bool
-	help
-	  Compile in platform device definitions for FIMC controller 3
-
-config S5P_DEV_FIMD0
-	bool
-	help
-	  Compile in platform device definitions for FIMD controller 0
-
-config S5P_DEV_G2D
-	bool
-	help
-	  Compile in platform device definitions for G2D device
-
-config S5P_DEV_I2C_HDMIPHY
-	bool
-	help
-	  Compile in platform device definitions for I2C HDMIPHY controller
-
-config S5P_DEV_JPEG
-	bool
-	help
-	  Compile in platform device definitions for JPEG codec
-
-config S5P_DEV_ONENAND
-	bool
-	help
-	  Compile in platform device definition for OneNAND controller
-
-config S5P_DEV_TV
-	bool
-	help
-	  Compile in platform device definition for TV interface
-
 config S3C24XX_PWM
 	bool "PWM device support"
 	select PWM
@@ -365,12 +243,6 @@ config S3C_DMA
 	help
 	  Internal configuration for S3C DMA core
 
-config S5P_IRQ_PM
-	bool
-	default y if S5P_PM
-	help
-	  Legacy IRQ power management for S5P platforms
-
 config SAMSUNG_PM_GPIO
 	bool
 	default y if GPIO_SAMSUNG && PM
@@ -453,17 +325,6 @@ config SAMSUNG_WDT_RESET
 	  Compile support for system restart by triggering watchdog reset.
 	  Used on SoCs that do not provide dedicated reset control.
 
-config S5P_PM
-	bool
-	help
-	  Common code for power management support on S5P and newer SoCs
-
-config S5P_SLEEP
-	bool
-	help
-	  Internal config node to apply common S5P sleep management code.
-	  Can be selected by S5P and newer SoCs with similar sleep procedure.
-
 config DEBUG_S3C_UART
 	depends on PLAT_SAMSUNG
 	int