summaryrefslogtreecommitdiff
path: root/drivers/ata/libata-sff.c
diff options
context:
space:
mode:
authorTejun Heo <tj@kernel.org>2010-05-10 21:41:34 +0200
committerJeff Garzik <jgarzik@redhat.com>2010-05-19 13:32:19 -0400
commitc7087652e1890a3feef35b30ee1d4be68e1932cd (patch)
tree04aeca0f44e87a531d7cb5f894b6790391c2c552 /drivers/ata/libata-sff.c
parent8930ff254a3a80d4477c3391ade07d6dd2a036c7 (diff)
downloadlinux-rt-c7087652e1890a3feef35b30ee1d4be68e1932cd.tar.gz
libata-sff: clean up BMDMA initialization
When BMDMA initialization failed or BMDMA was not available for whatever reason, bmdma_addr was left at zero and used as an indication that BMDMA shouldn't be used. This leads to the following problems. p1. For BMDMA drivers which don't use traditional BMDMA register, ata_bmdma_mode_filter() incorrectly inhibits DMA modes. Those drivers either have to inherit from ata_sff_port_ops or clear ->mode_filter explicitly. p2. non-BMDMA drivers call into BMDMA PRD table allocation. It doesn't actually allocate PRD table if bmdma_addr is not initialized but is still confusing. p3. For BMDMA drivers which don't use traditional BMDMA register, some methods might not be invoked as expected (e.g. bmdma_stop from ata_sff_post_internal_cmd()). p4. SFF drivers w/ custom DMA interface implement noop BMDMA ops worrying libata core might call into one of them. These problems are caused by the muddy line between SFF and BMDMA and the assumption that all BMDMA controllers initialize bmdma_addr. This patch fixes p1 and p2 by removing the bmdma_addr assumption and moving prd allocation to BMDMA port start. Later patches will fix the remaining issues. This patch improves BMDMA initialization such that * When BMDMA register initialization fails, falls back to PIO instead of failing. ata_pci_bmdma_init() never fails now. * When ata_pci_bmdma_init() falls back to PIO, it clears ap->mwdma_mask and udma_mask instead of depending on ata_bmdma_mode_filter(). This makes ata_bmdma_mode_filter() unnecessary thus resolving p1. * ata_port_start() which actually is BMDMA specific is moved to ata_bmdma_port_start(). ata_port_start() and ata_sff_port_start() are killed. * ata_sff_port_start32() is moved and renamed to ata_bmdma_port_start32(). Drivers which no longer call into PRD table allocation are... pdc_adma, sata_inic162x, sata_qstor, sata_sx4, pata_cmd640 and all drivers which inherit from ata_sff_port_ops. pata_icside sets ->port_start to ATA_OP_NULL as it doesn't need PRD but is a BMDMA controller and doesn't have custom port_start like other such controllers. Note that with the previous patch which makes all and only BMDMA drivers inherit from ata_bmdma_port_ops, this change doesn't break drivers which need PRD table. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/ata/libata-sff.c')
-rw-r--r--drivers/ata/libata-sff.c170
1 files changed, 84 insertions, 86 deletions
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 6400e8751391..f1c99a3e8b2c 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -66,8 +66,6 @@ const struct ata_port_operations ata_sff_port_ops = {
.sff_irq_clear = ata_sff_irq_clear,
.lost_interrupt = ata_sff_lost_interrupt,
-
- .port_start = ata_sff_port_start,
};
EXPORT_SYMBOL_GPL(ata_sff_port_ops);
@@ -2444,50 +2442,6 @@ void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc)
EXPORT_SYMBOL_GPL(ata_sff_post_internal_cmd);
/**
- * ata_sff_port_start - Set port up for dma.
- * @ap: Port to initialize
- *
- * Called just after data structures for each port are
- * initialized. Allocates space for PRD table if the device
- * is DMA capable SFF.
- *
- * May be used as the port_start() entry in ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-int ata_sff_port_start(struct ata_port *ap)
-{
- if (ap->ioaddr.bmdma_addr)
- return ata_port_start(ap);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ata_sff_port_start);
-
-/**
- * ata_sff_port_start32 - Set port up for dma.
- * @ap: Port to initialize
- *
- * Called just after data structures for each port are
- * initialized. Allocates space for PRD table if the device
- * is DMA capable SFF.
- *
- * May be used as the port_start() entry in ata_port_operations for
- * devices that are capable of 32bit PIO.
- *
- * LOCKING:
- * Inherited from caller.
- */
-int ata_sff_port_start32(struct ata_port *ap)
-{
- ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
- if (ap->ioaddr.bmdma_addr)
- return ata_port_start(ap);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ata_sff_port_start32);
-
-/**
* ata_sff_std_ports - initialize ioaddr with standard port offsets.
* @ioaddr: IO address structure to be initialized
*
@@ -2646,21 +2600,12 @@ int ata_pci_sff_prepare_host(struct pci_dev *pdev,
goto err_out;
/* init DMA related stuff */
- rc = ata_pci_bmdma_init(host);
- if (rc)
- goto err_bmdma;
+ ata_pci_bmdma_init(host);
devres_remove_group(&pdev->dev, NULL);
*r_host = host;
return 0;
-err_bmdma:
- /* This is necessary because PCI and iomap resources are
- * merged and releasing the top group won't release the
- * acquired resources if some of those have been acquired
- * before entering this function.
- */
- pcim_iounmap_regions(pdev, 0xf);
err_out:
devres_release_group(&pdev->dev, NULL);
return rc;
@@ -2843,12 +2788,12 @@ EXPORT_SYMBOL_GPL(ata_pci_sff_init_one);
const struct ata_port_operations ata_bmdma_port_ops = {
.inherits = &ata_sff_port_ops,
- .mode_filter = ata_bmdma_mode_filter,
-
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
+
+ .port_start = ata_bmdma_port_start,
};
EXPORT_SYMBOL_GPL(ata_bmdma_port_ops);
@@ -2856,22 +2801,10 @@ const struct ata_port_operations ata_bmdma32_port_ops = {
.inherits = &ata_bmdma_port_ops,
.sff_data_xfer = ata_sff_data_xfer32,
- .port_start = ata_sff_port_start32,
+ .port_start = ata_bmdma_port_start32,
};
EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops);
-unsigned long ata_bmdma_mode_filter(struct ata_device *adev,
- unsigned long xfer_mask)
-{
- /* Filter out DMA modes if the device has been configured by
- the BIOS as PIO only */
-
- if (adev->link->ap->ioaddr.bmdma_addr == NULL)
- xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
- return xfer_mask;
-}
-EXPORT_SYMBOL_GPL(ata_bmdma_mode_filter);
-
/**
* ata_bmdma_setup - Set up PCI IDE BMDMA transaction
* @qc: Info associated with this ATA transaction.
@@ -2976,6 +2909,53 @@ u8 ata_bmdma_status(struct ata_port *ap)
}
EXPORT_SYMBOL_GPL(ata_bmdma_status);
+
+/**
+ * ata_bmdma_port_start - Set port up for bmdma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Allocates space for PRD table.
+ *
+ * May be used as the port_start() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+int ata_bmdma_port_start(struct ata_port *ap)
+{
+ if (ap->mwdma_mask || ap->udma_mask) {
+ ap->prd = dmam_alloc_coherent(ap->host->dev, ATA_PRD_TBL_SZ,
+ &ap->prd_dma, GFP_KERNEL);
+ if (!ap->prd)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_port_start);
+
+/**
+ * ata_bmdma_port_start32 - Set port up for dma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Enables 32bit PIO and allocates space for PRD
+ * table.
+ *
+ * May be used as the port_start() entry in ata_port_operations for
+ * devices that are capable of 32bit PIO.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+int ata_bmdma_port_start32(struct ata_port *ap)
+{
+ ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
+ return ata_bmdma_port_start(ap);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_port_start32);
+
#ifdef CONFIG_PCI
/**
@@ -3004,6 +2984,19 @@ int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
}
EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
+static void ata_bmdma_nodma(struct ata_host *host, const char *reason)
+{
+ int i;
+
+ dev_printk(KERN_ERR, host->dev, "BMDMA: %s, falling back to PIO\n",
+ reason);
+
+ for (i = 0; i < 2; i++) {
+ host->ports[i]->mwdma_mask = 0;
+ host->ports[i]->udma_mask = 0;
+ }
+}
+
/**
* ata_pci_bmdma_init - acquire PCI BMDMA resources and init ATA host
* @host: target ATA host
@@ -3012,33 +3005,40 @@ EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
*
* LOCKING:
* Inherited from calling layer (may sleep).
- *
- * RETURNS:
- * 0 on success, -errno otherwise.
*/
-int ata_pci_bmdma_init(struct ata_host *host)
+void ata_pci_bmdma_init(struct ata_host *host)
{
struct device *gdev = host->dev;
struct pci_dev *pdev = to_pci_dev(gdev);
int i, rc;
/* No BAR4 allocation: No DMA */
- if (pci_resource_start(pdev, 4) == 0)
- return 0;
+ if (pci_resource_start(pdev, 4) == 0) {
+ ata_bmdma_nodma(host, "BAR4 is zero");
+ return;
+ }
- /* TODO: If we get no DMA mask we should fall back to PIO */
+ /*
+ * Some controllers require BMDMA region to be initialized
+ * even if DMA is not in use to clear IRQ status via
+ * ->sff_irq_clear method. Try to initialize bmdma_addr
+ * regardless of dma masks.
+ */
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
- return rc;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
- return rc;
+ ata_bmdma_nodma(host, "failed to set dma mask");
+ if (!rc) {
+ rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ ata_bmdma_nodma(host,
+ "failed to set consistent dma mask");
+ }
/* request and iomap DMA region */
rc = pcim_iomap_regions(pdev, 1 << 4, dev_driver_string(gdev));
if (rc) {
- dev_printk(KERN_ERR, gdev, "failed to request/iomap BAR4\n");
- return -ENOMEM;
+ ata_bmdma_nodma(host, "failed to request/iomap BAR4");
+ return;
}
host->iomap = pcim_iomap_table(pdev);
@@ -3057,8 +3057,6 @@ int ata_pci_bmdma_init(struct ata_host *host)
ata_port_desc(ap, "bmdma 0x%llx",
(unsigned long long)pci_resource_start(pdev, 4) + 8 * i);
}
-
- return 0;
}
EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);