i40e/i40evf: Record ITR register location in the q_vector

The drivers for i40e and i40evf had a reg_idx value stored in the q_vector
that was going completely unused. I can only assume this was copied over
from ixgbe and nobody knew how to use it.

I'm going to make use of the value to avoid having to compute the vector
and thus the register index for multiple paths throughout the drivers.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

3 files changed, 7 insertions, 10 deletions

diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index c7831f7f7761..357d6051281f 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -369,8 +369,7 @@ static void i40e_enable_wb_on_itr(struct i40e_vsi *vsi,
 	      I40E_VFINT_DYN_CTLN1_ITR_INDX_MASK; /* set noitr */
 
 	wr32(&vsi->back->hw,
-	     I40E_VFINT_DYN_CTLN1(q_vector->v_idx +
-				  vsi->base_vector - 1), val);
+	     I40E_VFINT_DYN_CTLN1(q_vector->reg_idx), val);
 	q_vector->arm_wb_state = true;
 }
 
@@ -389,7 +388,7 @@ void i40evf_force_wb(struct i40e_vsi *vsi, struct i40e_q_vector *q_vector)
 		  /* allow 00 to be written to the index */;
 
 	wr32(&vsi->back->hw,
-	     I40E_VFINT_DYN_CTLN1(q_vector->v_idx + vsi->base_vector - 1),
+	     I40E_VFINT_DYN_CTLN1(q_vector->reg_idx),
 	     val);
 }
 
@@ -1498,12 +1497,9 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi,
 	struct i40e_hw *hw = &vsi->back->hw;
 	bool rx = false, tx = false;
 	u32 rxval, txval;
-	int vector;
 	int idx = q_vector->v_idx;
 	int rx_itr_setting, tx_itr_setting;
 
-	vector = (q_vector->v_idx + vsi->base_vector);
-
 	/* avoid dynamic calculation if in countdown mode OR if
 	 * all dynamic is disabled
 	 */
@@ -1552,12 +1548,12 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi,
 		 */
 		rxval |= BIT(31);
 		/* don't check _DOWN because interrupt isn't being enabled */
-		wr32(hw, INTREG(vector - 1), rxval);
+		wr32(hw, INTREG(q_vector->reg_idx), rxval);
 	}
 
 enable_int:
 	if (!test_bit(__I40E_VSI_DOWN, vsi->state))
-		wr32(hw, INTREG(vector - 1), txval);
+		wr32(hw, INTREG(q_vector->reg_idx), txval);
 
 	if (q_vector->itr_countdown)
 		q_vector->itr_countdown--;
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf.h b/drivers/net/ethernet/intel/i40evf/i40evf.h
index 33c0ffcc8b13..9690c1ea019e 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf.h
+++ b/drivers/net/ethernet/intel/i40evf/i40evf.h
@@ -114,14 +114,14 @@ struct i40e_q_vector {
 	struct i40evf_adapter *adapter;
 	struct i40e_vsi *vsi;
 	struct napi_struct napi;
-	unsigned long reg_idx;
 	struct i40e_ring_container rx;
 	struct i40e_ring_container tx;
 	u32 ring_mask;
 	u8 num_ringpairs;	/* total number of ring pairs in vector */
 #define ITR_COUNTDOWN_START 100
 	u8 itr_countdown;	/* when 0 or 1 update ITR */
-	int v_idx;	/* vector index in list */
+	u16 v_idx;		/* index in the vsi->q_vector array. */
+	u16 reg_idx;		/* register index of the interrupt */
 	char name[IFNAMSIZ + 15];
 	bool arm_wb_state;
 	cpumask_t affinity_mask;
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index d59bf060196b..16989ad2ca90 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -1387,6 +1387,7 @@ static int i40evf_alloc_q_vectors(struct i40evf_adapter *adapter)
 		q_vector->adapter = adapter;
 		q_vector->vsi = &adapter->vsi;
 		q_vector->v_idx = q_idx;
+		q_vector->reg_idx = q_idx;
 		cpumask_copy(&q_vector->affinity_mask, cpu_possible_mask);
 		netif_napi_add(adapter->netdev, &q_vector->napi,
 			       i40evf_napi_poll, NAPI_POLL_WEIGHT);