Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (95 commits)
  [ARM] 4578/1: CM-x270: PCMCIA support
  [ARM] 4577/1: ITE 8152 PCI bridge support
  [ARM] 4576/1: CM-X270 machine support
  [ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put()
  [ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.c
  [ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c
  [ARM] pxa: Make cpu_is_pxaXXX dependent on configuration symbols
  [ARM] pxa: PXA3xx base support
  [NET] smc91x: fix PXA DMA support code
  [SERIAL] Fix console initialisation ordering
  [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile
  [ARM] Update arch/arm/Kconfig for drivers/Kconfig changes
  [ARM] 4600/1: fix kernel build failure with build-id-supporting binutils
  [ARM] 4599/1: Preserve ATAG list for use with kexec (2.6.23)
  [ARM] Rename consistent_sync() as dma_cache_maint()
  [ARM] 4572/1: ep93xx: add cirrus logic edb9307 support
  [ARM] 4596/1: S3C2412: Correct IRQs for SDI+CF and add decoding support
  [ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32
  [ARM] 4594/1: ns9xxx: use the new gpio functions
  [ARM] 4593/1: ns9xxx: implement generic clockevents
  ...

1 files changed, 99 insertions, 0 deletions

diff --git a/include/asm-arm/hardware/it8152.h b/include/asm-arm/hardware/it8152.h
new file mode 100644
index 000000000000..aaebb61aca48
--- /dev/null
+++ b/include/asm-arm/hardware/it8152.h
@@ -0,0 +1,99 @@
+/*
+ * linux/include/arm/hardware/it8152.h
+ *
+ * Copyright Compulab Ltd., 2006,2007
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * ITE 8152 companion chip register definitions
+ */
+
+#ifndef __ASM_HARDWARE_IT8152_H
+#define __ASM_HARDWARE_IT8152_H
+extern unsigned long it8152_base_address;
+
+#define IT8152_IO_BASE			(it8152_base_address + 0x03e00000)
+#define IT8152_CFGREG_BASE		(it8152_base_address + 0x03f00000)
+
+#define __REG_IT8152(x)			(it8152_base_address + (x))
+
+#define IT8152_PCI_CFG_ADDR		__REG_IT8152(0x3f00800)
+#define IT8152_PCI_CFG_DATA		__REG_IT8152(0x3f00804)
+
+#define IT8152_INTC_LDCNIRR		__REG_IT8152(0x3f00300)
+#define IT8152_INTC_LDPNIRR		__REG_IT8152(0x3f00304)
+#define IT8152_INTC_LDCNIMR		__REG_IT8152(0x3f00308)
+#define IT8152_INTC_LDPNIMR		__REG_IT8152(0x3f0030C)
+#define IT8152_INTC_LDNITR		__REG_IT8152(0x3f00310)
+#define IT8152_INTC_LDNIAR		__REG_IT8152(0x3f00314)
+#define IT8152_INTC_LPCNIRR		__REG_IT8152(0x3f00320)
+#define IT8152_INTC_LPPNIRR		__REG_IT8152(0x3f00324)
+#define IT8152_INTC_LPCNIMR		__REG_IT8152(0x3f00328)
+#define IT8152_INTC_LPPNIMR		__REG_IT8152(0x3f0032C)
+#define IT8152_INTC_LPNITR		__REG_IT8152(0x3f00330)
+#define IT8152_INTC_LPNIAR		__REG_IT8152(0x3f00334)
+#define IT8152_INTC_PDCNIRR		__REG_IT8152(0x3f00340)
+#define IT8152_INTC_PDPNIRR		__REG_IT8152(0x3f00344)
+#define IT8152_INTC_PDCNIMR		__REG_IT8152(0x3f00348)
+#define IT8152_INTC_PDPNIMR		__REG_IT8152(0x3f0034C)
+#define IT8152_INTC_PDNITR		__REG_IT8152(0x3f00350)
+#define IT8152_INTC_PDNIAR		__REG_IT8152(0x3f00354)
+#define IT8152_INTC_INTC_TYPER		__REG_IT8152(0x3f003FC)
+
+#define IT8152_GPIO_GPDR		__REG_IT8152(0x3f00500)
+
+/*
+  Interrup contoler per register summary:
+  ---------------------------------------
+  LCDNIRR:
+  IT8152_LD_IRQ(8) PCICLK stop
+  IT8152_LD_IRQ(7) MCLK ready
+  IT8152_LD_IRQ(6) s/w
+  IT8152_LD_IRQ(5) UART
+  IT8152_LD_IRQ(4) GPIO
+  IT8152_LD_IRQ(3) TIMER 4
+  IT8152_LD_IRQ(2) TIMER 3
+  IT8152_LD_IRQ(1) TIMER 2
+  IT8152_LD_IRQ(0) TIMER 1
+
+  LPCNIRR:
+  IT8152_LP_IRQ(x) serial IRQ x
+
+  PCIDNIRR:
+  IT8152_PD_IRQ(14) PCISERR
+  IT8152_PD_IRQ(13) CPU/PCI bridge target abort (h2pTADR)
+  IT8152_PD_IRQ(12) CPU/PCI bridge master abort (h2pMADR)
+  IT8152_PD_IRQ(11) PCI INTD
+  IT8152_PD_IRQ(10) PCI INTC
+  IT8152_PD_IRQ(9)  PCI INTB
+  IT8152_PD_IRQ(8)  PCI INTA
+  IT8152_PD_IRQ(7)  serial INTD
+  IT8152_PD_IRQ(6)  serial INTC
+  IT8152_PD_IRQ(5)  serial INTB
+  IT8152_PD_IRQ(4)  serial INTA
+  IT8152_PD_IRQ(3)  serial IRQ IOCHK (IOCHKR)
+  IT8152_PD_IRQ(2)  chaining DMA (CDMAR)
+  IT8152_PD_IRQ(1)  USB (USBR)
+  IT8152_PD_IRQ(0)  Audio controller (ACR)
+ */
+/* frequently used interrupts */
+#define IT8152_PCISERR		IT8152_PD_IRQ(14)
+#define IT8152_H2PTADR		IT8152_PD_IRQ(13)
+#define IT8152_H2PMAR		IT8152_PD_IRQ(12)
+#define IT8152_PCI_INTD		IT8152_PD_IRQ(11)
+#define IT8152_PCI_INTC		IT8152_PD_IRQ(10)
+#define IT8152_PCI_INTB		IT8152_PD_IRQ(9)
+#define IT8152_PCI_INTA		IT8152_PD_IRQ(8)
+#define IT8152_CDMA_INT		IT8152_PD_IRQ(2)
+#define IT8152_USB_INT		IT8152_PD_IRQ(1)
+#define IT8152_AUDIO_INT	IT8152_PD_IRQ(0)
+
+struct pci_dev;
+struct pci_sys_data;
+
+extern void it8152_irq_demux(unsigned int irq, struct irq_desc *desc);
+extern void it8152_init_irq(void);
+extern int it8152_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
+extern int it8152_pci_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *it8152_pci_scan_bus(int nr, struct pci_sys_data *sys);
+
+#endif /* __ASM_HARDWARE_IT8152_H */