diff options
| -rw-r--r-- | tools/usb/testusb.c | 260 |
1 files changed, 190 insertions, 70 deletions
diff --git a/tools/usb/testusb.c b/tools/usb/testusb.c index 1f372983be6d..f08e89463842 100644 --- a/tools/usb/testusb.c +++ b/tools/usb/testusb.c @@ -1,7 +1,9 @@ -/* $(CROSS_COMPILE)cc -Wall -g -lpthread -o testusb testusb.c */ +/* $(CROSS_COMPILE)cc -Wall -Wextra -g -lpthread -o testusb testusb.c */ /* * Copyright (c) 2002 by David Brownell + * Copyright (c) 2010 by Samsung Electronics + * Author: Michal Nazarewicz <m.nazarewicz@samsung.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -18,6 +20,16 @@ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +/* + * This program issues ioctls to perform the tests implemented by the + * kernel driver. It can generate a variety of transfer patterns; you + * should make sure to test both regular streaming and mixes of + * transfer sizes (including short transfers). + * + * For more information on how this can be used and on USB testing + * refer to <URL:http://www.linux-usb.org/usbtest/>. + */ + #include <stdio.h> #include <string.h> #include <ftw.h> @@ -25,6 +37,7 @@ #include <pthread.h> #include <unistd.h> #include <errno.h> +#include <limits.h> #include <sys/types.h> #include <sys/stat.h> @@ -56,6 +69,13 @@ struct usbtest_param { /* #include <linux/usb_ch9.h> */ +#define USB_DT_DEVICE 0x01 +#define USB_DT_INTERFACE 0x04 + +#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ +#define USB_CLASS_VENDOR_SPEC 0xff + + struct usb_device_descriptor { __u8 bLength; __u8 bDescriptorType; @@ -73,6 +93,19 @@ struct usb_device_descriptor { __u8 bNumConfigurations; } __attribute__ ((packed)); +struct usb_interface_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bInterfaceNumber; + __u8 bAlternateSetting; + __u8 bNumEndpoints; + __u8 bInterfaceClass; + __u8 bInterfaceSubClass; + __u8 bInterfaceProtocol; + __u8 iInterface; +} __attribute__ ((packed)); + enum usb_device_speed { USB_SPEED_UNKNOWN = 0, /* enumerating */ USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ @@ -105,11 +138,42 @@ struct testdev { }; static struct testdev *testdevs; -static int is_testdev (struct usb_device_descriptor *dev) +static int testdev_ffs_ifnum(FILE *fd) { + union { + char buf[255]; + struct usb_interface_descriptor intf; + } u; + + for (;;) { + if (fread(u.buf, 1, 1, fd) != 1) + return -1; + if (fread(u.buf + 1, (unsigned char)u.buf[0] - 1, 1, fd) != 1) + return -1; + + if (u.intf.bLength == sizeof u.intf + && u.intf.bDescriptorType == USB_DT_INTERFACE + && u.intf.bNumEndpoints == 2 + && u.intf.bInterfaceClass == USB_CLASS_VENDOR_SPEC + && u.intf.bInterfaceSubClass == 0 + && u.intf.bInterfaceProtocol == 0) + return (unsigned char)u.intf.bInterfaceNumber; + } +} + +static int testdev_ifnum(FILE *fd) +{ + struct usb_device_descriptor dev; + + if (fread(&dev, sizeof dev, 1, fd) != 1) + return -1; + + if (dev.bLength != sizeof dev || dev.bDescriptorType != USB_DT_DEVICE) + return -1; + /* FX2 with (tweaked) bulksrc firmware */ - if (dev->idVendor == 0x0547 && dev->idProduct == 0x1002) - return 1; + if (dev.idVendor == 0x0547 && dev.idProduct == 0x1002) + return 0; /*----------------------------------------------------*/ @@ -124,95 +188,108 @@ static int is_testdev (struct usb_device_descriptor *dev) */ /* generic EZ-USB FX controller */ - if (dev->idVendor == 0x0547 && dev->idProduct == 0x2235) - return 1; + if (dev.idVendor == 0x0547 && dev.idProduct == 0x2235) + return 0; /* generic EZ-USB FX2 controller */ - if (dev->idVendor == 0x04b4 && dev->idProduct == 0x8613) - return 1; + if (dev.idVendor == 0x04b4 && dev.idProduct == 0x8613) + return 0; /* CY3671 development board with EZ-USB FX */ - if (dev->idVendor == 0x0547 && dev->idProduct == 0x0080) - return 1; + if (dev.idVendor == 0x0547 && dev.idProduct == 0x0080) + return 0; /* Keyspan 19Qi uses an21xx (original EZ-USB) */ - if (dev->idVendor == 0x06cd && dev->idProduct == 0x010b) - return 1; + if (dev.idVendor == 0x06cd && dev.idProduct == 0x010b) + return 0; /*----------------------------------------------------*/ /* "gadget zero", Linux-USB test software */ - if (dev->idVendor == 0x0525 && dev->idProduct == 0xa4a0) - return 1; + if (dev.idVendor == 0x0525 && dev.idProduct == 0xa4a0) + return 0; /* user mode subset of that */ - if (dev->idVendor == 0x0525 && dev->idProduct == 0xa4a4) - return 1; + if (dev.idVendor == 0x0525 && dev.idProduct == 0xa4a4) + return testdev_ffs_ifnum(fd); + /* return 0; */ /* iso version of usermode code */ - if (dev->idVendor == 0x0525 && dev->idProduct == 0xa4a3) - return 1; + if (dev.idVendor == 0x0525 && dev.idProduct == 0xa4a3) + return 0; /* some GPL'd test firmware uses these IDs */ - if (dev->idVendor == 0xfff0 && dev->idProduct == 0xfff0) - return 1; + if (dev.idVendor == 0xfff0 && dev.idProduct == 0xfff0) + return 0; /*----------------------------------------------------*/ /* iBOT2 high speed webcam */ - if (dev->idVendor == 0x0b62 && dev->idProduct == 0x0059) - return 1; + if (dev.idVendor == 0x0b62 && dev.idProduct == 0x0059) + return 0; - return 0; + /*----------------------------------------------------*/ + + /* the FunctionFS gadget can have the source/sink interface + * anywhere. We look for an interface descriptor that match + * what we expect. We ignore configuratiens thou. */ + + if (dev.idVendor == 0x0525 && dev.idProduct == 0xa4ac + && (dev.bDeviceClass == USB_CLASS_PER_INTERFACE + || dev.bDeviceClass == USB_CLASS_VENDOR_SPEC)) + return testdev_ffs_ifnum(fd); + + return -1; } -static int find_testdev (const char *name, const struct stat *sb, int flag) +static int find_testdev(const char *name, const struct stat *sb, int flag) { - int fd; - struct usb_device_descriptor dev; + FILE *fd; + int ifnum; + struct testdev *entry; + + (void)sb; /* unused */ if (flag != FTW_F) return 0; /* ignore /proc/bus/usb/{devices,drivers} */ - if (strrchr (name, '/')[1] == 'd') + if (strrchr(name, '/')[1] == 'd') return 0; - if ((fd = open (name, O_RDONLY)) < 0) { - perror ("can't open dev file r/o"); + fd = fopen(name, "rb"); + if (!fd) { + perror(name); return 0; } - if (read (fd, &dev, sizeof dev) != sizeof dev) - fputs ("short devfile read!\n", stderr); - else if (is_testdev (&dev)) { - struct testdev *entry; - - if ((entry = calloc (1, sizeof *entry)) == 0) { - fputs ("no mem!\n", stderr); - goto done; - } - entry->name = strdup (name); - if (!entry->name) { - free (entry); - goto done; - } - // FIXME better to look at each interface and ask if it's - // bound to 'usbtest', rather than assume interface 0 - entry->ifnum = 0; - - // FIXME ask usbfs what speed; update USBDEVFS_CONNECTINFO - // so it tells about high speed etc + ifnum = testdev_ifnum(fd); + fclose(fd); + if (ifnum < 0) + return 0; - fprintf (stderr, "%s speed\t%s\n", - speed (entry->speed), entry->name); + entry = calloc(1, sizeof *entry); + if (!entry) + goto nomem; - entry->next = testdevs; - testdevs = entry; + entry->name = strdup(name); + if (!entry->name) { + free(entry); +nomem: + perror("malloc"); + return 0; } -done: - close (fd); + entry->ifnum = ifnum; + + /* FIXME ask usbfs what speed; update USBDEVFS_CONNECTINFO so + * it tells about high speed etc */ + + fprintf(stderr, "%s speed\t%s\t%u\n", + speed(entry->speed), entry->name, entry->ifnum); + + entry->next = testdevs; + testdevs = entry; return 0; } @@ -277,11 +354,51 @@ restart: return arg; } +static const char *usbfs_dir_find(void) +{ + static char usbfs_path_0[] = "/dev/usb/devices"; + static char usbfs_path_1[] = "/proc/bus/usb/devices"; + + static char *const usbfs_paths[] = { + usbfs_path_0, usbfs_path_1 + }; + + static char *const * + end = usbfs_paths + sizeof usbfs_paths / sizeof *usbfs_paths; + + char *const *it = usbfs_paths; + do { + int fd = open(*it, O_RDONLY); + close(fd); + if (fd >= 0) { + strrchr(*it, '/')[0] = '\0'; + return *it; + } + } while (++it != end); + + return NULL; +} + +static int parse_num(unsigned *num, const char *str) +{ + unsigned long val; + char *end; + + errno = 0; + val = strtoul(str, &end, 0); + if (errno || *end || val > UINT_MAX) + return -1; + *num = val; + return 0; +} + int main (int argc, char **argv) { + int c; struct testdev *entry; char *device; + const char *usbfs_dir = NULL; int all = 0, forever = 0, not = 0; int test = -1 /* all */; struct usbtest_param param; @@ -303,23 +420,24 @@ int main (int argc, char **argv) /* for easy use when hotplugging */ device = getenv ("DEVICE"); - while ((c = getopt (argc, argv, "D:ac:g:hns:t:v:")) != EOF) + while ((c = getopt (argc, argv, "D:aA:c:g:hns:t:v:")) != EOF) switch (c) { case 'D': /* device, if only one */ device = optarg; continue; + case 'A': /* use all devices with specified usbfs dir */ + usbfs_dir = optarg; + /* FALL THROUGH */ case 'a': /* use all devices */ - device = 0; + device = NULL; all = 1; continue; case 'c': /* count iterations */ - param.iterations = atoi (optarg); - if (param.iterations < 0) + if (parse_num(¶m.iterations, optarg)) goto usage; continue; case 'g': /* scatter/gather entries */ - param.sglen = atoi (optarg); - if (param.sglen < 0) + if (parse_num(¶m.sglen, optarg)) goto usage; continue; case 'l': /* loop forever */ @@ -329,8 +447,7 @@ int main (int argc, char **argv) not = 1; continue; case 's': /* size of packet */ - param.length = atoi (optarg); - if (param.length < 0) + if (parse_num(¶m.length, optarg)) goto usage; continue; case 't': /* run just one test */ @@ -339,15 +456,14 @@ int main (int argc, char **argv) goto usage; continue; case 'v': /* vary packet size by ... */ - param.vary = atoi (optarg); - if (param.vary < 0) + if (parse_num(¶m.vary, optarg)) goto usage; continue; case '?': case 'h': default: usage: - fprintf (stderr, "usage: %s [-an] [-D dev]\n" + fprintf (stderr, "usage: %s [-n] [-D dev | -a | -A usbfs-dir]\n" "\t[-c iterations] [-t testnum]\n" "\t[-s packetsize] [-g sglen] [-v vary]\n", argv [0]); @@ -361,13 +477,17 @@ usage: goto usage; } - if ((c = open ("/proc/bus/usb/devices", O_RDONLY)) < 0) { - fputs ("usbfs files are missing\n", stderr); - return -1; + /* Find usbfs mount point */ + if (!usbfs_dir) { + usbfs_dir = usbfs_dir_find(); + if (!usbfs_dir) { + fputs ("usbfs files are missing\n", stderr); + return -1; + } } /* collect and list the test devices */ - if (ftw ("/proc/bus/usb", find_testdev, 3) != 0) { + if (ftw (usbfs_dir, find_testdev, 3) != 0) { fputs ("ftw failed; is usbfs missing?\n", stderr); return -1; } |