diff options
74 files changed, 1790 insertions, 791 deletions
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt index cd5e23912888..27f9a27bb754 100644 --- a/Documentation/devicetree/bindings/clock/at91-clock.txt +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt @@ -6,6 +6,16 @@ This binding uses the common clock binding[1]. Required properties: - compatible : shall be one of the following: + "atmel,at91sam9x5-sckc": + at91 SCKC (Slow Clock Controller) + This node contains the slow clock definitions. + + "atmel,at91sam9x5-clk-slow-osc": + at91 slow oscillator + + "atmel,at91sam9x5-clk-slow-rc-osc": + at91 internal slow RC oscillator + "atmel,at91rm9200-pmc" or "atmel,at91sam9g45-pmc" or "atmel,at91sam9n12-pmc" or @@ -15,8 +25,18 @@ Required properties: All at91 specific clocks (clocks defined below) must be child node of the PMC node. + "atmel,at91sam9x5-clk-slow" (under sckc node) + or + "atmel,at91sam9260-clk-slow" (under pmc node): + at91 slow clk + + "atmel,at91rm9200-clk-main-osc" + "atmel,at91sam9x5-clk-main-rc-osc" + at91 main clk sources + + "atmel,at91sam9x5-clk-main" "atmel,at91rm9200-clk-main": - at91 main oscillator + at91 main clock "atmel,at91rm9200-clk-master" or "atmel,at91sam9x5-clk-master": @@ -54,6 +74,63 @@ Required properties: "atmel,at91sam9x5-clk-utmi": at91 utmi clock +Required properties for SCKC node: +- reg : defines the IO memory reserved for the SCKC. +- #size-cells : shall be 0 (reg is used to encode clk id). +- #address-cells : shall be 1 (reg is used to encode clk id). + + +For example: + sckc: sckc@fffffe50 { + compatible = "atmel,sama5d3-pmc"; + reg = <0xfffffe50 0x4> + #size-cells = <0>; + #address-cells = <1>; + + /* put at91 slow clocks here */ + }; + + +Required properties for internal slow RC oscillator: +- #clock-cells : from common clock binding; shall be set to 0. +- clock-frequency : define the internal RC oscillator frequency. + +Optional properties: +- clock-accuracy : define the internal RC oscillator accuracy. + +For example: + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + +Required properties for slow oscillator: +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : shall encode the main osc source clk sources (see atmel datasheet). + +Optional properties: +- atmel,osc-bypass : boolean property. Set this when a clock signal is directly + provided on XIN. + +For example: + slow_osc: slow_osc { + compatible = "atmel,at91rm9200-clk-slow-osc"; + #clock-cells = <0>; + clocks = <&slow_xtal>; + }; + +Required properties for slow clock: +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : shall encode the slow clk sources (see atmel datasheet). + +For example: + clk32k: slck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + Required properties for PMC node: - reg : defines the IO memory reserved for the PMC. - #size-cells : shall be 0 (reg is used to encode clk id). @@ -85,24 +162,57 @@ For example: /* put at91 clocks here */ }; +Required properties for main clock internal RC oscillator: +- interrupt-parent : must reference the PMC node. +- interrupts : shall be set to "<0>". +- clock-frequency : define the internal RC oscillator frequency. + +Optional properties: +- clock-accuracy : define the internal RC oscillator accuracy. + +For example: + main_rc_osc: main_rc_osc { + compatible = "atmel,at91sam9x5-clk-main-rc-osc"; + interrupt-parent = <&pmc>; + interrupts = <0>; + clock-frequency = <12000000>; + clock-accuracy = <50000000>; + }; + +Required properties for main clock oscillator: +- interrupt-parent : must reference the PMC node. +- interrupts : shall be set to "<0>". +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : shall encode the main osc source clk sources (see atmel datasheet). + +Optional properties: +- atmel,osc-bypass : boolean property. Specified if a clock signal is provided + on XIN. + + clock signal is directly provided on XIN pin. + +For example: + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + interrupt-parent = <&pmc>; + interrupts = <0>; + #clock-cells = <0>; + clocks = <&main_xtal>; + }; + Required properties for main clock: - interrupt-parent : must reference the PMC node. - interrupts : shall be set to "<0>". - #clock-cells : from common clock binding; shall be set to 0. -- clocks (optional if clock-frequency is provided) : shall be the slow clock - phandle. This clock is used to calculate the main clock rate if - "clock-frequency" is not provided. -- clock-frequency : the main oscillator frequency.Prefer the use of - "clock-frequency" over automatic clock rate calculation. +- clocks : shall encode the main clk sources (see atmel datasheet). For example: main: mainck { - compatible = "atmel,at91rm9200-clk-main"; + compatible = "atmel,at91sam9x5-clk-main"; interrupt-parent = <&pmc>; interrupts = <0>; #clock-cells = <0>; - clocks = <&ck32k>; - clock-frequency = <18432000>; + clocks = <&main_rc_osc &main_osc>; }; Required properties for master clock: diff --git a/MAINTAINERS b/MAINTAINERS index 106626442124..285e03fcfed9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1617,12 +1617,6 @@ S: Supported F: drivers/misc/atmel_tclib.c F: drivers/clocksource/tcb_clksrc.c -ATMEL TSADCC DRIVER -M: Josh Wu <josh.wu@atmel.com> -L: linux-input@vger.kernel.org -S: Supported -F: drivers/input/touchscreen/atmel_tsadcc.c - ATMEL USBA UDC DRIVER M: Nicolas Ferre <nicolas.ferre@atmel.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 8f417c20013f..2bb6bcee025c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -376,7 +376,6 @@ config ARCH_AT91 select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select IRQ_DOMAIN - select NEED_MACH_GPIO_H select NEED_MACH_IO_H if PCCARD select PINCTRL select PINCTRL_AT91 if USE_OF diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts index a542d5837a17..27ebb0f722fd 100644 --- a/arch/arm/boot/dts/at91-cosino_mega2560.dts +++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts @@ -32,11 +32,6 @@ status = "okay"; }; - - tsadcc: tsadcc@f804c000 { - status = "okay"; - }; - rtc@fffffeb0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index f86fd76b312b..903b2bd9acbf 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -21,6 +21,14 @@ reg = <0x20000000 0x10000000>; }; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + ahb { apb { mmc0: mmc@f0000000 { diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 10083c236cbe..0d1d26f911be 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -46,6 +46,18 @@ reg = <0x20000000 0x08000000>; }; + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -556,17 +568,24 @@ #size-cells = <0>; #interrupt-cells = <1>; - clk32k: slck { + slow_rc_osc: slow_rc_osc { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9260-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_xtal>; }; main: mainck { compatible = "atmel,at91rm9200-clk-main"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&clk32k>; + clocks = <&main_xtal>; }; plla: pllack { diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 2ce527e70c7a..c6683ea8b743 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -20,6 +20,10 @@ reg = <0x20000000 0x4000000>; }; + main_xtal { + clock-frequency = <18432000>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 981373c56bcc..d309525ed398 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -50,6 +50,18 @@ reg = <0x20000000 0x04000000>; }; + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + clocks { adc_op_clk: adc_op_clk{ compatible = "fixed-clock"; @@ -795,17 +807,11 @@ #size-cells = <0>; #interrupt-cells = <1>; - clk32k: slck { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - main: mainck { compatible = "atmel,at91rm9200-clk-main"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&clk32k>; + clocks = <&main_xtal>; }; plla: pllack { @@ -1017,6 +1023,32 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; status = "disabled"; }; + + sckc@fffffd50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffd50 0x4>; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <1200000>; + clocks = <&slow_xtal>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <75>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index f148fa4b3ab9..d4a010e40fe3 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -20,6 +20,15 @@ reg = <0x20000000 0x4000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index e08da17e1890..b5bf3a9df80b 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -58,6 +58,18 @@ reg = <0x20000000 0x8000000>; }; + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + clocks { adc_op_clk: adc_op_clk{ compatible = "fixed-clock"; @@ -833,18 +845,29 @@ #size-cells = <0>; #interrupt-cells = <1>; - clk32k: slck { - compatible = "fixed-clock"; + main_rc_osc: main_rc_osc { + compatible = "atmel,at91sam9x5-clk-main-rc-osc"; #clock-cells = <0>; - clock-frequency = <32768>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCRCS>; + clock-frequency = <12000000>; + clock-accuracy = <50000000>; }; - main: mainck { - compatible = "atmel,at91rm9200-clk-main"; + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; #clock-cells = <0>; interrupt-parent = <&pmc>; interrupts = <AT91_PMC_MOSCS>; - clocks = <&clk32k>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91sam9x5-clk-main"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCSELS>; + clocks = <&main_rc_osc &main_osc>; }; plla: pllack { @@ -1173,6 +1196,32 @@ status = "disabled"; }; + sckc@fffffe50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffe50 0x4>; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + atmel,startup-time-usec = <75>; + }; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + clocks = <&slow_xtal>; + atmel,startup-time-usec = <1200000>; + }; + + clk32k: slowck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; + rtc@fffffeb0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffeb0 0x30>; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index f55ed072c8e6..b0b1331c1974 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -18,6 +18,14 @@ reg = <0x20000000 0x20000000>; }; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + ahb { apb { spi0: spi@f0004000 { diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index e181a50fd65a..c6661a60025d 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -83,7 +83,6 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m -CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y # CONFIG_SERIO is not set # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_ATMEL=y @@ -146,6 +145,8 @@ CONFIG_DMADEVICES=y CONFIG_AT_HDMAC=y CONFIG_DMATEST=m # CONFIG_IOMMU_SUPPORT is not set +CONFIG_IIO=y +CONFIG_AT91_ADC=y CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig index 85f846ae9ff2..5d7797d43d23 100644 --- a/arch/arm/configs/at91sam9rl_defconfig +++ b/arch/arm/configs/at91sam9rl_defconfig @@ -45,7 +45,6 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y # CONFIG_SERIO is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y @@ -65,6 +64,8 @@ CONFIG_MMC=y CONFIG_MMC_ATMELMCI=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_IIO=y +CONFIG_AT91_ADC=y CONFIG_EXT2_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index dc3881e07630..869fa18ebeb2 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -122,7 +122,6 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y -CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y # CONFIG_SERIO is not set CONFIG_LEGACY_PTY_COUNT=4 CONFIG_SERIAL_ATMEL=y diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index f3f19f21352a..4860918b411e 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -25,6 +25,7 @@ #include "board.h" #include "generic.h" +#include "gpio.h" /* -------------------------------------------------------------------- diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index a0282928e9c1..14a6e35801ff 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -24,12 +24,11 @@ #include <mach/at91sam9260_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_adc.h> #include <mach/hardware.h> #include "board.h" #include "generic.h" - +#include "gpio.h" /* -------------------------------------------------------------------- * USB Host @@ -1325,13 +1324,6 @@ static struct at91_adc_trigger at91_adc_triggers[] = { }, }; -static struct at91_adc_reg_desc at91_adc_register_g20 = { - .channel_base = AT91_ADC_CHR(0), - .drdy_mask = AT91_ADC_DRDY, - .status_register = AT91_ADC_SR, - .trigger_register = AT91_ADC_MR, -}; - void __init at91_add_device_adc(struct at91_adc_data *data) { if (!data) @@ -1349,9 +1341,7 @@ void __init at91_add_device_adc(struct at91_adc_data *data) if (data->use_external_triggers) at91_set_A_periph(AT91_PIN_PA22, 0); - data->num_channels = 4; data->startup_time = 10; - data->registers = &at91_adc_register_g20; data->trigger_number = 4; data->trigger_list = at91_adc_triggers; diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 80e35895d28f..43b21f456f6e 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -29,7 +29,7 @@ #include "board.h" #include "generic.h" - +#include "gpio.h" /* -------------------------------------------------------------------- * USB Host diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 43d53d6156dd..953616e5dbcb 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -28,6 +28,7 @@ #include "board.h" #include "generic.h" +#include "gpio.h" /* -------------------------------------------------------------------- diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 5e6f498db0a8..9d3d544ac19c 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -182,7 +182,7 @@ static struct clk vdec_clk = { static struct clk adc_op_clk = { .name = "adc_op_clk", .type = CLK_TYPE_PERIPHERAL, - .rate_hz = 13200000, + .rate_hz = 300000, }; /* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */ diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index dab362c06487..d943363c1845 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -25,7 +25,6 @@ #include <linux/fb.h> #include <video/atmel_lcdc.h> -#include <mach/at91_adc.h> #include <mach/at91sam9g45.h> #include <mach/at91sam9g45_matrix.h> #include <mach/at91_matrix.h> @@ -39,6 +38,7 @@ #include "board.h" #include "generic.h" #include "clock.h" +#include "gpio.h" /* -------------------------------------------------------------------- @@ -1133,58 +1133,7 @@ static void __init at91_add_device_rtc(void) {} /* -------------------------------------------------------------------- - * Touchscreen - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE) -static u64 tsadcc_dmamask = DMA_BIT_MASK(32); -static struct at91_tsadcc_data tsadcc_data; - -static struct resource tsadcc_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_TSC, - .end = AT91SAM9G45_BASE_TSC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device at91sam9g45_tsadcc_device = { - .name = "atmel_tsadcc", - .id = -1, - .dev = { - .dma_mask = &tsadcc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &tsadcc_data, - }, - .resource = tsadcc_resources, - .num_resources = ARRAY_SIZE(tsadcc_resources), -}; - -void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) -{ - if (!data) - return; - - at91_set_gpio_input(AT91_PIN_PD20, 0); /* AD0_XR */ - at91_set_gpio_input(AT91_PIN_PD21, 0); /* AD1_XL */ - at91_set_gpio_input(AT91_PIN_PD22, 0); /* AD2_YT */ - at91_set_gpio_input(AT91_PIN_PD23, 0); /* AD3_TB */ - - tsadcc_data = *data; - platform_device_register(&at91sam9g45_tsadcc_device); -} -#else -void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * ADC + * ADC and touchscreen * -------------------------------------------------------------------- */ #if IS_ENABLED(CONFIG_AT91_ADC) @@ -1236,13 +1185,6 @@ static struct at91_adc_trigger at91_adc_triggers[] = { }, }; -static struct at91_adc_reg_desc at91_adc_register_g45 = { - .channel_base = AT91_ADC_CHR(0), - .drdy_mask = AT91_ADC_DRDY, - .status_register = AT91_ADC_SR, - .trigger_register = 0x08, -}; - void __init at91_add_device_adc(struct at91_adc_data *data) { if (!data) @@ -1268,9 +1210,7 @@ void __init at91_add_device_adc(struct at91_adc_data *data) if (data->use_external_triggers) at91_set_A_periph(AT91_PIN_PD28, 0); - data->num_channels = 8; data->startup_time = 40; - data->registers = &at91_adc_register_g45; data->trigger_number = 4; data->trigger_list = at91_adc_triggers; diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 57f12d86c0e6..a79960f57e6a 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -153,6 +153,11 @@ static struct clk ac97_clk = { .pmc_mask = 1 << AT91SAM9RL_ID_AC97C, .type = CLK_TYPE_PERIPHERAL, }; +static struct clk adc_op_clk = { + .name = "adc_op_clk", + .type = CLK_TYPE_PERIPHERAL, + .rate_hz = 1000000, +}; static struct clk *periph_clocks[] __initdata = { &pioA_clk, @@ -178,6 +183,7 @@ static struct clk *periph_clocks[] __initdata = { &udphs_clk, &lcdc_clk, &ac97_clk, + &adc_op_clk, // irq0 }; @@ -216,6 +222,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk), + CLKDEV_CON_ID("adc_clk", &tsc_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 428fc412aaf1..044ad8bc6963 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -23,9 +23,11 @@ #include <mach/at91sam9_smc.h> #include <mach/hardware.h> #include <linux/platform_data/dma-atmel.h> +#include <linux/platform_data/at91_adc.h> #include "board.h" #include "generic.h" +#include "gpio.h" /* -------------------------------------------------------------------- @@ -608,14 +610,13 @@ static void __init at91_add_device_tc(void) { } /* -------------------------------------------------------------------- - * Touchscreen + * ADC and Touchscreen * -------------------------------------------------------------------- */ -#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE) -static u64 tsadcc_dmamask = DMA_BIT_MASK(32); -static struct at91_tsadcc_data tsadcc_data; +#if IS_ENABLED(CONFIG_AT91_ADC) +static struct at91_adc_data adc_data; -static struct resource tsadcc_resources[] = { +static struct resource adc_resources[] = { [0] = { .start = AT91SAM9RL_BASE_TSC, .end = AT91SAM9RL_BASE_TSC + SZ_16K - 1, @@ -628,36 +629,71 @@ static struct resource tsadcc_resources[] = { } }; -static struct platform_device at91sam9rl_tsadcc_device = { - .name = "atmel_tsadcc", - .id = -1, - .dev = { - .dma_mask = &tsadcc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &tsadcc_data, +static struct platform_device at91_adc_device = { + .name = "at91sam9rl-adc", + .id = -1, + .dev = { + .platform_data = &adc_data, }, - .resource = tsadcc_resources, - .num_resources = ARRAY_SIZE(tsadcc_resources), + .resource = adc_resources, + .num_resources = ARRAY_SIZE(adc_resources), }; -void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) +static struct at91_adc_trigger at91_adc_triggers[] = { + [0] = { + .name = "external-rising", + .value = 1, + .is_external = true, + }, + [1] = { + .name = "external-falling", + .value = 2, + .is_external = true, + }, + [2] = { + .name = "external-any", + .value = 3, + .is_external = true, + }, + [3] = { + .name = "continuous", + .value = 6, + .is_external = false, + }, +}; + +void __init at91_add_device_adc(struct at91_adc_data *data) { if (!data) return; - at91_set_A_periph(AT91_PIN_PA17, 0); /* AD0_XR */ - at91_set_A_periph(AT91_PIN_PA18, 0); /* AD1_XL */ - at91_set_A_periph(AT91_PIN_PA19, 0); /* AD2_YT */ - at91_set_A_periph(AT91_PIN_PA20, 0); /* AD3_TB */ - - tsadcc_data = *data; - platform_device_register(&at91sam9rl_tsadcc_device); + if (test_bit(0, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PA17, 0); + if (test_bit(1, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PA18, 0); + if (test_bit(2, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PA19, 0); + if (test_bit(3, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PA20, 0); + if (test_bit(4, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PD6, 0); + if (test_bit(5, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PD7, 0); + + if (data->use_external_triggers) + at91_set_A_periph(AT91_PIN_PB15, 0); + + data->startup_time = 40; + data->trigger_number = 4; + data->trigger_list = at91_adc_triggers; + + adc_data = *data; + platform_device_register(&at91_adc_device); } #else -void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {} +void __init at91_add_device_adc(struct at91_adc_data *data) {} #endif - /* -------------------------------------------------------------------- * RTC * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 35ab632bbf68..3f6dbcc34022 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -39,7 +39,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" - +#include "gpio.h" static void __init onearm_init_early(void) { diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index f95e31cda4b3..597c649170aa 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -46,6 +46,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init afeb9260_init_early(void) diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 112e867c4abe..a30502c8d379 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -44,6 +44,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init cam60_init_early(void) diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 92983050a9bd..47313d3ee037 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -39,6 +39,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init carmeva_init_early(void) diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 008527efdbcf..2037f78c84e7 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -48,6 +48,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init cpu9krea_init_early(void) { diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 42f1353a4baf..c094350c9314 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -43,6 +43,8 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" + static struct gpio_led cpuat91_leds[] = { { diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index e5fde215225b..0e35a45cf8d4 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -42,7 +42,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" - +#include "gpio.h" static void __init csb337_init_early(void) { diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index fdf11061c577..18d027f529a8 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -39,6 +39,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init csb637_init_early(void) diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index f9be8161bbfa..aa457a8b22f5 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -38,6 +38,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init eb9200_init_early(void) diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index b2fcd71262ba..ede1373ccaba 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -42,6 +42,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init ecb_at91init_early(void) diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 77de410efc90..4e75321a8f2a 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -31,6 +31,8 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" + static void __init eco920_init_early(void) { diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 737c08563628..68f1ab6bd08f 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -37,6 +37,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init flexibity_init_early(void) { diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index c20a870ea9c9..8b22c60bb238 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -47,6 +47,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" /* * The FOX Board G20 hardware comes as the "Netus G20" board with diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index 416bae8435ee..b729dd1271bf 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -39,6 +39,7 @@ #include "generic.h" #include "gsia18s.h" #include "stamp9g20.h" +#include "gpio.h" static void __init gsia18s_init_early(void) { diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 88e2f5d2d16d..93b1df42f639 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -39,6 +39,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init kafa_init_early(void) diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index 0c519d9ebffc..d58d36225e08 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -42,6 +42,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init kb9202_init_early(void) diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 5f25fa54eb93..b48d95ec5152 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -37,6 +37,7 @@ #include "sam9_smc.h" #include "generic.h" #include "stamp9g20.h" +#include "gpio.h" static void __init pcontrol_g20_init_early(void) diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index ab2b2ec36c14..2c0f2d554d84 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -43,6 +43,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init picotux200_init_early(void) diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 8b17dadc1aba..953cea416754 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -45,6 +45,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c index f6d7f1958c7e..f28e8b74df4b 100644 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -31,6 +31,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init rsi_ews_init_early(void) { diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 43ee4dc43b50..d24dda67e2d3 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -43,6 +43,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index f4f8735315da..65dea12d685e 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -49,6 +49,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 473546b9408b..4637432de08f 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -53,6 +53,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 2f931915c80c..cd2726ee5add 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -52,6 +52,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index f9cd1f2c7146..e1be6e25b380 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -50,6 +50,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" /* * board revision encoding diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index ef39078c8ce2..1ea61328f30d 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -50,6 +50,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) @@ -300,21 +301,13 @@ static struct atmel_lcdfb_pdata __initdata ek_lcdc_data; /* - * Touchscreen - */ -static struct at91_tsadcc_data ek_tsadcc_data = { - .adc_clock = 300000, - .pendet_debounce = 0x0d, - .ts_sample_hold_time = 0x0a, -}; - -/* - * ADCs + * ADCs and touchscreen */ static struct at91_adc_data ek_adc_data = { .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7), .use_external_triggers = true, .vref = 3300, + .touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE, }; /* @@ -485,9 +478,7 @@ static void __init ek_board_init(void) at91_add_device_isi(&isi_data, true); /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); - /* Touch Screen */ - at91_add_device_tsadcc(&ek_tsadcc_data); - /* ADC */ + /* ADC and touchscreen */ at91_add_device_adc(&ek_adc_data); /* Push Buttons */ ek_add_device_buttons(); diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 604eecf6cd70..b64648b4a1fc 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -18,6 +18,7 @@ #include <linux/clk.h> #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/platform_data/at91_adc.h> #include <video/atmel_lcdc.h> @@ -38,6 +39,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) @@ -229,12 +231,13 @@ static struct gpio_led ek_leds[] = { /* - * Touchscreen + * ADC + Touchscreen */ -static struct at91_tsadcc_data ek_tsadcc_data = { - .adc_clock = 1000000, - .pendet_debounce = 0x0f, - .ts_sample_hold_time = 0x03, +static struct at91_adc_data ek_adc_data = { + .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5), + .use_external_triggers = true, + .vref = 3300, + .touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE, }; @@ -310,8 +313,8 @@ static void __init ek_board_init(void) at91_add_device_lcdc(&ek_lcdc_data); /* AC97 */ at91_add_device_ac97(&ek_ac97_data); - /* Touch Screen Controller */ - at91_add_device_tsadcc(&ek_tsadcc_data); + /* Touch Screen Controller + ADC */ + at91_add_device_adc(&ek_adc_data); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); /* Push Buttons */ diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index f1d49e929ccb..1b870e6def0c 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -38,6 +38,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" #define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x)) diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index e4a5ac17cdbc..3b575036ff96 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -32,6 +32,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" void __init stamp9g20_init_early(void) diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index be083771df2e..46fdb0c68a68 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -50,6 +50,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init yl9200_init_early(void) diff --git a/arch/arm/mach-at91/board.h b/arch/arm/mach-at91/board.h index 6c08b341167d..4e773b55bc2d 100644 --- a/arch/arm/mach-at91/board.h +++ b/arch/arm/mach-at91/board.h @@ -118,9 +118,6 @@ struct isi_platform_data; extern void __init at91_add_device_isi(struct isi_platform_data *data, bool use_pck_as_mck); - /* Touchscreen Controller */ -extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data); - /* CAN */ extern void __init at91_add_device_can(struct at91_can_data *data); diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index a5afcf76550e..12ed05bbdc5c 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -29,6 +29,7 @@ #include <mach/at91_pio.h> #include "generic.h" +#include "gpio.h" #define MAX_NB_GPIO_PER_BANK 32 diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/gpio.h index 5fc23771c154..eed465ab0dd7 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/gpio.h @@ -209,14 +209,6 @@ extern int at91_get_gpio_value(unsigned pin); extern void at91_gpio_suspend(void); extern void at91_gpio_resume(void); -#ifdef CONFIG_PINCTRL_AT91 -extern void at91_pinctrl_gpio_suspend(void); -extern void at91_pinctrl_gpio_resume(void); -#else -static inline void at91_pinctrl_gpio_suspend(void) {} -static inline void at91_pinctrl_gpio_resume(void) {} -#endif - #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h deleted file mode 100644 index c287307b9a3b..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_adc.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_adc.h - * - * Copyright (C) SAN People - * - * Analog-to-Digital Converter (ADC) registers. - * Based on AT91SAM9260 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_ADC_H -#define AT91_ADC_H - -#define AT91_ADC_CR 0x00 /* Control Register */ -#define AT91_ADC_SWRST (1 << 0) /* Software Reset */ -#define AT91_ADC_START (1 << 1) /* Start Conversion */ - -#define AT91_ADC_MR 0x04 /* Mode Register */ -#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */ -#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */ -#define AT91_ADC_TRGSEL_TC0 (0 << 1) -#define AT91_ADC_TRGSEL_TC1 (1 << 1) -#define AT91_ADC_TRGSEL_TC2 (2 << 1) -#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1) -#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */ -#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */ -#define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar Rate Selection */ -#define AT91_ADC_PRESCAL_9G45 (0xff << 8) -#define AT91_ADC_PRESCAL_(x) ((x) << 8) -#define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up Time */ -#define AT91_ADC_STARTUP_9G45 (0x7f << 16) -#define AT91_ADC_STARTUP_9X5 (0xf << 16) -#define AT91_ADC_STARTUP_(x) ((x) << 16) -#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */ -#define AT91_ADC_SHTIM_(x) ((x) << 24) - -#define AT91_ADC_CHER 0x10 /* Channel Enable Register */ -#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */ -#define AT91_ADC_CHSR 0x18 /* Channel Status Register */ -#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */ - -#define AT91_ADC_SR 0x1C /* Status Register */ -#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */ -#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */ -#define AT91_ADC_DRDY (1 << 16) /* Data Ready */ -#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */ -#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */ -#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */ - -#define AT91_ADC_SR_9X5 0x30 /* Status Register for 9x5 */ -#define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */ - -#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */ -#define AT91_ADC_LDATA (0x3ff) - -#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */ -#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */ -#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */ -#define AT91_ADC_IER_PEN (1 << 29) -#define AT91_ADC_IER_NOPEN (1 << 30) -#define AT91_ADC_IER_XRDY (1 << 20) -#define AT91_ADC_IER_YRDY (1 << 21) -#define AT91_ADC_IER_PRDY (1 << 22) -#define AT91_ADC_ISR_PENS (1 << 31) - -#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */ -#define AT91_ADC_DATA (0x3ff) - -#define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */ - -#define AT91_ADC_ACR 0x94 /* Analog Control Register */ -#define AT91_ADC_ACR_PENDETSENS (0x3 << 0) /* pull-up resistor */ - -#define AT91_ADC_TSMR 0xB0 -#define AT91_ADC_TSMR_TSMODE (3 << 0) /* Touch Screen Mode */ -#define AT91_ADC_TSMR_TSMODE_NONE (0 << 0) -#define AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS (1 << 0) -#define AT91_ADC_TSMR_TSMODE_4WIRE_PRESS (2 << 0) -#define AT91_ADC_TSMR_TSMODE_5WIRE (3 << 0) -#define AT91_ADC_TSMR_TSAV (3 << 4) /* Averages samples */ -#define AT91_ADC_TSMR_TSAV_(x) ((x) << 4) -#define AT91_ADC_TSMR_SCTIM (0x0f << 16) /* Switch closure time */ -#define AT91_ADC_TSMR_PENDBC (0x0f << 28) /* Pen Debounce time */ -#define AT91_ADC_TSMR_PENDBC_(x) ((x) << 28) -#define AT91_ADC_TSMR_NOTSDMA (1 << 22) /* No Touchscreen DMA */ -#define AT91_ADC_TSMR_PENDET_DIS (0 << 24) /* Pen contact detection disable */ -#define AT91_ADC_TSMR_PENDET_ENA (1 << 24) /* Pen contact detection enable */ - -#define AT91_ADC_TSXPOSR 0xB4 -#define AT91_ADC_TSYPOSR 0xB8 -#define AT91_ADC_TSPRESSR 0xBC - -#define AT91_ADC_TRGR_9260 AT91_ADC_MR -#define AT91_ADC_TRGR_9G45 0x08 -#define AT91_ADC_TRGR_9X5 0xC0 - -/* Trigger Register bit field */ -#define AT91_ADC_TRGR_TRGPER (0xffff << 16) -#define AT91_ADC_TRGR_TRGPER_(x) ((x) << 16) -#define AT91_ADC_TRGR_TRGMOD (0x7 << 0) -#define AT91_ADC_TRGR_MOD_PERIOD_TRIG (5 << 0) - -#endif diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index f17aa3150019..56338245653a 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -104,5 +104,20 @@ /* Clocks */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ +/* + * FIXME: this is needed to communicate between the pinctrl driver and + * the PM implementation in the machine. Possibly part of the PM + * implementation should be moved down into the pinctrl driver and get + * called as part of the generic suspend/resume path. + */ +#ifndef __ASSEMBLY__ +#ifdef CONFIG_PINCTRL_AT91 +extern void at91_pinctrl_gpio_suspend(void); +extern void at91_pinctrl_gpio_resume(void); +#else +static inline void at91_pinctrl_gpio_suspend(void) {} +static inline void at91_pinctrl_gpio_resume(void) {} +#endif +#endif #endif diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c index 3e22978b5547..77c4d8fd03fd 100644 --- a/arch/arm/mach-at91/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include "board.h" +#include "gpio.h" /* ------------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 8bda1cefdf96..e95554532987 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -32,6 +32,7 @@ #include "at91_aic.h" #include "generic.h" #include "pm.h" +#include "gpio.h" /* * Show the reason for the previous system reset. diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile index 46c1d3d0d66b..4998aee59267 100644 --- a/drivers/clk/at91/Makefile +++ b/drivers/clk/at91/Makefile @@ -2,8 +2,8 @@ # Makefile for at91 specific clk # -obj-y += pmc.o -obj-y += clk-main.o clk-pll.o clk-plldiv.o clk-master.o +obj-y += pmc.o sckc.o +obj-y += clk-slow.o clk-main.o clk-pll.o clk-plldiv.o clk-master.o obj-y += clk-system.o clk-peripheral.o clk-programmable.o obj-$(CONFIG_HAVE_AT91_UTMI) += clk-utmi.o diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c index 8e9e8cc0412d..733306131b99 100644 --- a/drivers/clk/at91/clk-main.c +++ b/drivers/clk/at91/clk-main.c @@ -30,99 +30,546 @@ #define MAINF_LOOP_MIN_WAIT (USEC_PER_SEC / SLOW_CLOCK_FREQ) #define MAINF_LOOP_MAX_WAIT MAINFRDY_TIMEOUT -struct clk_main { +#define MOR_KEY_MASK (0xff << 16) + +struct clk_main_osc { struct clk_hw hw; struct at91_pmc *pmc; - unsigned long rate; unsigned int irq; wait_queue_head_t wait; }; -#define to_clk_main(hw) container_of(hw, struct clk_main, hw) +#define to_clk_main_osc(hw) container_of(hw, struct clk_main_osc, hw) + +struct clk_main_rc_osc { + struct clk_hw hw; + struct at91_pmc *pmc; + unsigned int irq; + wait_queue_head_t wait; + unsigned long frequency; + unsigned long accuracy; +}; + +#define to_clk_main_rc_osc(hw) container_of(hw, struct clk_main_rc_osc, hw) + +struct clk_rm9200_main { + struct clk_hw hw; + struct at91_pmc *pmc; +}; + +#define to_clk_rm9200_main(hw) container_of(hw, struct clk_rm9200_main, hw) -static irqreturn_t clk_main_irq_handler(int irq, void *dev_id) +struct clk_sam9x5_main { + struct clk_hw hw; + struct at91_pmc *pmc; + unsigned int irq; + wait_queue_head_t wait; + u8 parent; +}; + +#define to_clk_sam9x5_main(hw) container_of(hw, struct clk_sam9x5_main, hw) + +static irqreturn_t clk_main_osc_irq_handler(int irq, void *dev_id) { - struct clk_main *clkmain = (struct clk_main *)dev_id; + struct clk_main_osc *osc = dev_id; - wake_up(&clkmain->wait); - disable_irq_nosync(clkmain->irq); + wake_up(&osc->wait); + disable_irq_nosync(osc->irq); return IRQ_HANDLED; } -static int clk_main_prepare(struct clk_hw *hw) +static int clk_main_osc_prepare(struct clk_hw *hw) { - struct clk_main *clkmain = to_clk_main(hw); - struct at91_pmc *pmc = clkmain->pmc; - unsigned long halt_time, timeout; + struct clk_main_osc *osc = to_clk_main_osc(hw); + struct at91_pmc *pmc = osc->pmc; u32 tmp; + tmp = pmc_read(pmc, AT91_CKGR_MOR) & ~MOR_KEY_MASK; + if (tmp & AT91_PMC_OSCBYPASS) + return 0; + + if (!(tmp & AT91_PMC_MOSCEN)) { + tmp |= AT91_PMC_MOSCEN | AT91_PMC_KEY; + pmc_write(pmc, AT91_CKGR_MOR, tmp); + } + while (!(pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCS)) { - enable_irq(clkmain->irq); - wait_event(clkmain->wait, + enable_irq(osc->irq); + wait_event(osc->wait, pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCS); } - if (clkmain->rate) - return 0; + return 0; +} + +static void clk_main_osc_unprepare(struct clk_hw *hw) +{ + struct clk_main_osc *osc = to_clk_main_osc(hw); + struct at91_pmc *pmc = osc->pmc; + u32 tmp = pmc_read(pmc, AT91_CKGR_MOR); + + if (tmp & AT91_PMC_OSCBYPASS) + return; + + if (!(tmp & AT91_PMC_MOSCEN)) + return; + + tmp &= ~(AT91_PMC_KEY | AT91_PMC_MOSCEN); + pmc_write(pmc, AT91_CKGR_MOR, tmp | AT91_PMC_KEY); +} + +static int clk_main_osc_is_prepared(struct clk_hw *hw) +{ + struct clk_main_osc *osc = to_clk_main_osc(hw); + struct at91_pmc *pmc = osc->pmc; + u32 tmp = pmc_read(pmc, AT91_CKGR_MOR); + + if (tmp & AT91_PMC_OSCBYPASS) + return 1; + + return !!((pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCS) && + (pmc_read(pmc, AT91_CKGR_MOR) & AT91_PMC_MOSCEN)); +} + +static const struct clk_ops main_osc_ops = { + .prepare = clk_main_osc_prepare, + .unprepare = clk_main_osc_unprepare, + .is_prepared = clk_main_osc_is_prepared, +}; + +static struct clk * __init +at91_clk_register_main_osc(struct at91_pmc *pmc, + unsigned int irq, + const char *name, + const char *parent_name, + bool bypass) +{ + int ret; + struct clk_main_osc *osc; + struct clk *clk = NULL; + struct clk_init_data init; + + if (!pmc || !irq || !name || !parent_name) + return ERR_PTR(-EINVAL); + + osc = kzalloc(sizeof(*osc), GFP_KERNEL); + if (!osc) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &main_osc_ops; + init.parent_names = &parent_name; + init.num_parents = 1; + init.flags = CLK_IGNORE_UNUSED; + + osc->hw.init = &init; + osc->pmc = pmc; + osc->irq = irq; + + init_waitqueue_head(&osc->wait); + irq_set_status_flags(osc->irq, IRQ_NOAUTOEN); + ret = request_irq(osc->irq, clk_main_osc_irq_handler, + IRQF_TRIGGER_HIGH, name, osc); + if (ret) + return ERR_PTR(ret); + + if (bypass) + pmc_write(pmc, AT91_CKGR_MOR, + (pmc_read(pmc, AT91_CKGR_MOR) & + ~(MOR_KEY_MASK | AT91_PMC_MOSCEN)) | + AT91_PMC_OSCBYPASS | AT91_PMC_KEY); + + clk = clk_register(NULL, &osc->hw); + if (IS_ERR(clk)) { + free_irq(irq, osc); + kfree(osc); + } + + return clk; +} + +void __init of_at91rm9200_clk_main_osc_setup(struct device_node *np, + struct at91_pmc *pmc) +{ + struct clk *clk; + unsigned int irq; + const char *name = np->name; + const char *parent_name; + bool bypass; + + of_property_read_string(np, "clock-output-names", &name); + bypass = of_property_read_bool(np, "atmel,osc-bypass"); + parent_name = of_clk_get_parent_name(np, 0); + + irq = irq_of_parse_and_map(np, 0); + if (!irq) + return; + + clk = at91_clk_register_main_osc(pmc, irq, name, parent_name, bypass); + if (IS_ERR(clk)) + return; + + of_clk_add_provider(np, of_clk_src_simple_get, clk); +} + +static irqreturn_t clk_main_rc_osc_irq_handler(int irq, void *dev_id) +{ + struct clk_main_rc_osc *osc = dev_id; + + wake_up(&osc->wait); + disable_irq_nosync(osc->irq); + + return IRQ_HANDLED; +} + +static int clk_main_rc_osc_prepare(struct clk_hw *hw) +{ + struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw); + struct at91_pmc *pmc = osc->pmc; + u32 tmp; + + tmp = pmc_read(pmc, AT91_CKGR_MOR) & ~MOR_KEY_MASK; + + if (!(tmp & AT91_PMC_MOSCRCEN)) { + tmp |= AT91_PMC_MOSCRCEN | AT91_PMC_KEY; + pmc_write(pmc, AT91_CKGR_MOR, tmp); + } + + while (!(pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCRCS)) { + enable_irq(osc->irq); + wait_event(osc->wait, + pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCRCS); + } + + return 0; +} + +static void clk_main_rc_osc_unprepare(struct clk_hw *hw) +{ + struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw); + struct at91_pmc *pmc = osc->pmc; + u32 tmp = pmc_read(pmc, AT91_CKGR_MOR); + + if (!(tmp & AT91_PMC_MOSCRCEN)) + return; + + tmp &= ~(MOR_KEY_MASK | AT91_PMC_MOSCRCEN); + pmc_write(pmc, AT91_CKGR_MOR, tmp | AT91_PMC_KEY); +} + +static int clk_main_rc_osc_is_prepared(struct clk_hw *hw) +{ + struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw); + struct at91_pmc *pmc = osc->pmc; + + return !!((pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCRCS) && + (pmc_read(pmc, AT91_CKGR_MOR) & AT91_PMC_MOSCRCEN)); +} + +static unsigned long clk_main_rc_osc_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw); + + return osc->frequency; +} + +static unsigned long clk_main_rc_osc_recalc_accuracy(struct clk_hw *hw, + unsigned long parent_acc) +{ + struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw); + + return osc->accuracy; +} + +static const struct clk_ops main_rc_osc_ops = { + .prepare = clk_main_rc_osc_prepare, + .unprepare = clk_main_rc_osc_unprepare, + .is_prepared = clk_main_rc_osc_is_prepared, + .recalc_rate = clk_main_rc_osc_recalc_rate, + .recalc_accuracy = clk_main_rc_osc_recalc_accuracy, +}; + +static struct clk * __init +at91_clk_register_main_rc_osc(struct at91_pmc *pmc, + unsigned int irq, + const char *name, + u32 frequency, u32 accuracy) +{ + int ret; + struct clk_main_rc_osc *osc; + struct clk *clk = NULL; + struct clk_init_data init; + + if (!pmc || !irq || !name || !frequency) + return ERR_PTR(-EINVAL); + + osc = kzalloc(sizeof(*osc), GFP_KERNEL); + if (!osc) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &main_rc_osc_ops; + init.parent_names = NULL; + init.num_parents = 0; + init.flags = CLK_IS_ROOT | CLK_IGNORE_UNUSED; + + osc->hw.init = &init; + osc->pmc = pmc; + osc->irq = irq; + osc->frequency = frequency; + osc->accuracy = accuracy; + + init_waitqueue_head(&osc->wait); + irq_set_status_flags(osc->irq, IRQ_NOAUTOEN); + ret = request_irq(osc->irq, clk_main_rc_osc_irq_handler, + IRQF_TRIGGER_HIGH, name, osc); + if (ret) + return ERR_PTR(ret); + + clk = clk_register(NULL, &osc->hw); + if (IS_ERR(clk)) { + free_irq(irq, osc); + kfree(osc); + } + + return clk; +} + +void __init of_at91sam9x5_clk_main_rc_osc_setup(struct device_node *np, + struct at91_pmc *pmc) +{ + struct clk *clk; + unsigned int irq; + u32 frequency = 0; + u32 accuracy = 0; + const char *name = np->name; + + of_property_read_string(np, "clock-output-names", &name); + of_property_read_u32(np, "clock-frequency", &frequency); + of_property_read_u32(np, "clock-accuracy", &accuracy); + + irq = irq_of_parse_and_map(np, 0); + if (!irq) + return; + + clk = at91_clk_register_main_rc_osc(pmc, irq, name, frequency, + accuracy); + if (IS_ERR(clk)) + return; + + of_clk_add_provider(np, of_clk_src_simple_get, clk); +} + + +static int clk_main_probe_frequency(struct at91_pmc *pmc) +{ + unsigned long prep_time, timeout; + u32 tmp; timeout = jiffies + usecs_to_jiffies(MAINFRDY_TIMEOUT); do { - halt_time = jiffies; + prep_time = jiffies; tmp = pmc_read(pmc, AT91_CKGR_MCFR); if (tmp & AT91_PMC_MAINRDY) return 0; usleep_range(MAINF_LOOP_MIN_WAIT, MAINF_LOOP_MAX_WAIT); - } while (time_before(halt_time, timeout)); + } while (time_before(prep_time, timeout)); - return 0; + return -ETIMEDOUT; } -static int clk_main_is_prepared(struct clk_hw *hw) +static unsigned long clk_main_recalc_rate(struct at91_pmc *pmc, + unsigned long parent_rate) { - struct clk_main *clkmain = to_clk_main(hw); + u32 tmp; + + if (parent_rate) + return parent_rate; + + tmp = pmc_read(pmc, AT91_CKGR_MCFR); + if (!(tmp & AT91_PMC_MAINRDY)) + return 0; - return !!(pmc_read(clkmain->pmc, AT91_PMC_SR) & AT91_PMC_MOSCS); + return ((tmp & AT91_PMC_MAINF) * SLOW_CLOCK_FREQ) / MAINF_DIV; } -static unsigned long clk_main_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) +static int clk_rm9200_main_prepare(struct clk_hw *hw) { - u32 tmp; - struct clk_main *clkmain = to_clk_main(hw); + struct clk_rm9200_main *clkmain = to_clk_rm9200_main(hw); + + return clk_main_probe_frequency(clkmain->pmc); +} + +static int clk_rm9200_main_is_prepared(struct clk_hw *hw) +{ + struct clk_rm9200_main *clkmain = to_clk_rm9200_main(hw); + + return !!(pmc_read(clkmain->pmc, AT91_CKGR_MCFR) & AT91_PMC_MAINRDY); +} + +static unsigned long clk_rm9200_main_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_rm9200_main *clkmain = to_clk_rm9200_main(hw); + + return clk_main_recalc_rate(clkmain->pmc, parent_rate); +} + +static const struct clk_ops rm9200_main_ops = { + .prepare = clk_rm9200_main_prepare, + .is_prepared = clk_rm9200_main_is_prepared, + .recalc_rate = clk_rm9200_main_recalc_rate, +}; + +static struct clk * __init +at91_clk_register_rm9200_main(struct at91_pmc *pmc, + const char *name, + const char *parent_name) +{ + struct clk_rm9200_main *clkmain; + struct clk *clk = NULL; + struct clk_init_data init; + + if (!pmc || !name) + return ERR_PTR(-EINVAL); + + if (!parent_name) + return ERR_PTR(-EINVAL); + + clkmain = kzalloc(sizeof(*clkmain), GFP_KERNEL); + if (!clkmain) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &rm9200_main_ops; + init.parent_names = &parent_name; + init.num_parents = 1; + init.flags = 0; + + clkmain->hw.init = &init; + clkmain->pmc = pmc; + + clk = clk_register(NULL, &clkmain->hw); + if (IS_ERR(clk)) + kfree(clkmain); + + return clk; +} + +void __init of_at91rm9200_clk_main_setup(struct device_node *np, + struct at91_pmc *pmc) +{ + struct clk *clk; + const char *parent_name; + const char *name = np->name; + + parent_name = of_clk_get_parent_name(np, 0); + of_property_read_string(np, "clock-output-names", &name); + + clk = at91_clk_register_rm9200_main(pmc, name, parent_name); + if (IS_ERR(clk)) + return; + + of_clk_add_provider(np, of_clk_src_simple_get, clk); +} + +static irqreturn_t clk_sam9x5_main_irq_handler(int irq, void *dev_id) +{ + struct clk_sam9x5_main *clkmain = dev_id; + + wake_up(&clkmain->wait); + disable_irq_nosync(clkmain->irq); + + return IRQ_HANDLED; +} + +static int clk_sam9x5_main_prepare(struct clk_hw *hw) +{ + struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw); struct at91_pmc *pmc = clkmain->pmc; - if (clkmain->rate) - return clkmain->rate; + while (!(pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCSELS)) { + enable_irq(clkmain->irq); + wait_event(clkmain->wait, + pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCSELS); + } + + return clk_main_probe_frequency(pmc); +} - tmp = pmc_read(pmc, AT91_CKGR_MCFR) & AT91_PMC_MAINF; - clkmain->rate = (tmp * parent_rate) / MAINF_DIV; +static int clk_sam9x5_main_is_prepared(struct clk_hw *hw) +{ + struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw); - return clkmain->rate; + return !!(pmc_read(clkmain->pmc, AT91_PMC_SR) & AT91_PMC_MOSCSELS); } -static const struct clk_ops main_ops = { - .prepare = clk_main_prepare, - .is_prepared = clk_main_is_prepared, - .recalc_rate = clk_main_recalc_rate, +static unsigned long clk_sam9x5_main_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw); + + return clk_main_recalc_rate(clkmain->pmc, parent_rate); +} + +static int clk_sam9x5_main_set_parent(struct clk_hw *hw, u8 index) +{ + struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw); + struct at91_pmc *pmc = clkmain->pmc; + u32 tmp; + + if (index > 1) + return -EINVAL; + + tmp = pmc_read(pmc, AT91_CKGR_MOR) & ~MOR_KEY_MASK; + + if (index && !(tmp & AT91_PMC_MOSCSEL)) + pmc_write(pmc, AT91_CKGR_MOR, tmp | AT91_PMC_MOSCSEL); + else if (!index && (tmp & AT91_PMC_MOSCSEL)) + pmc_write(pmc, AT91_CKGR_MOR, tmp & ~AT91_PMC_MOSCSEL); + + while (!(pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCSELS)) { + enable_irq(clkmain->irq); + wait_event(clkmain->wait, + pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCSELS); + } + + return 0; +} + +static u8 clk_sam9x5_main_get_parent(struct clk_hw *hw) +{ + struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw); + + return !!(pmc_read(clkmain->pmc, AT91_CKGR_MOR) & AT91_PMC_MOSCEN); +} + +static const struct clk_ops sam9x5_main_ops = { + .prepare = clk_sam9x5_main_prepare, + .is_prepared = clk_sam9x5_main_is_prepared, + .recalc_rate = clk_sam9x5_main_recalc_rate, + .set_parent = clk_sam9x5_main_set_parent, + .get_parent = clk_sam9x5_main_get_parent, }; static struct clk * __init -at91_clk_register_main(struct at91_pmc *pmc, - unsigned int irq, - const char *name, - const char *parent_name, - unsigned long rate) +at91_clk_register_sam9x5_main(struct at91_pmc *pmc, + unsigned int irq, + const char *name, + const char **parent_names, + int num_parents) { int ret; - struct clk_main *clkmain; + struct clk_sam9x5_main *clkmain; struct clk *clk = NULL; struct clk_init_data init; if (!pmc || !irq || !name) return ERR_PTR(-EINVAL); - if (!rate && !parent_name) + if (!parent_names || !num_parents) return ERR_PTR(-EINVAL); clkmain = kzalloc(sizeof(*clkmain), GFP_KERNEL); @@ -130,19 +577,20 @@ at91_clk_register_main(struct at91_pmc *pmc, return ERR_PTR(-ENOMEM); init.name = name; - init.ops = &main_ops; - init.parent_names = parent_name ? &parent_name : NULL; - init.num_parents = parent_name ? 1 : 0; - init.flags = parent_name ? 0 : CLK_IS_ROOT; + init.ops = &sam9x5_main_ops; + init.parent_names = parent_names; + init.num_parents = num_parents; + init.flags = CLK_SET_PARENT_GATE; clkmain->hw.init = &init; - clkmain->rate = rate; clkmain->pmc = pmc; clkmain->irq = irq; + clkmain->parent = !!(pmc_read(clkmain->pmc, AT91_CKGR_MOR) & + AT91_PMC_MOSCEN); init_waitqueue_head(&clkmain->wait); irq_set_status_flags(clkmain->irq, IRQ_NOAUTOEN); - ret = request_irq(clkmain->irq, clk_main_irq_handler, - IRQF_TRIGGER_HIGH, "clk-main", clkmain); + ret = request_irq(clkmain->irq, clk_sam9x5_main_irq_handler, + IRQF_TRIGGER_HIGH, name, clkmain); if (ret) return ERR_PTR(ret); @@ -155,33 +603,36 @@ at91_clk_register_main(struct at91_pmc *pmc, return clk; } - - -static void __init -of_at91_clk_main_setup(struct device_node *np, struct at91_pmc *pmc) +void __init of_at91sam9x5_clk_main_setup(struct device_node *np, + struct at91_pmc *pmc) { struct clk *clk; + const char *parent_names[2]; + int num_parents; unsigned int irq; - const char *parent_name; const char *name = np->name; - u32 rate = 0; + int i; + + num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells"); + if (num_parents <= 0 || num_parents > 2) + return; + + for (i = 0; i < num_parents; ++i) { + parent_names[i] = of_clk_get_parent_name(np, i); + if (!parent_names[i]) + return; + } - parent_name = of_clk_get_parent_name(np, 0); of_property_read_string(np, "clock-output-names", &name); - of_property_read_u32(np, "clock-frequency", &rate); + irq = irq_of_parse_and_map(np, 0); if (!irq) return; - clk = at91_clk_register_main(pmc, irq, name, parent_name, rate); + clk = at91_clk_register_sam9x5_main(pmc, irq, name, parent_names, + num_parents); if (IS_ERR(clk)) return; of_clk_add_provider(np, of_clk_src_simple_get, clk); } - -void __init of_at91rm9200_clk_main_setup(struct device_node *np, - struct at91_pmc *pmc) -{ - of_at91_clk_main_setup(np, pmc); -} diff --git a/drivers/clk/at91/clk-slow.c b/drivers/clk/at91/clk-slow.c new file mode 100644 index 000000000000..0300c46ee247 --- /dev/null +++ b/drivers/clk/at91/clk-slow.c @@ -0,0 +1,467 @@ +/* + * drivers/clk/at91/clk-slow.c + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/clk/at91_pmc.h> +#include <linux/delay.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/sched.h> +#include <linux/wait.h> + +#include "pmc.h" +#include "sckc.h" + +#define SLOW_CLOCK_FREQ 32768 +#define SLOWCK_SW_CYCLES 5 +#define SLOWCK_SW_TIME_USEC ((SLOWCK_SW_CYCLES * USEC_PER_SEC) / \ + SLOW_CLOCK_FREQ) + +#define AT91_SCKC_CR 0x00 +#define AT91_SCKC_RCEN (1 << 0) +#define AT91_SCKC_OSC32EN (1 << 1) +#define AT91_SCKC_OSC32BYP (1 << 2) +#define AT91_SCKC_OSCSEL (1 << 3) + +struct clk_slow_osc { + struct clk_hw hw; + void __iomem *sckcr; + unsigned long startup_usec; +}; + +#define to_clk_slow_osc(hw) container_of(hw, struct clk_slow_osc, hw) + +struct clk_slow_rc_osc { + struct clk_hw hw; + void __iomem *sckcr; + unsigned long frequency; + unsigned long accuracy; + unsigned long startup_usec; +}; + +#define to_clk_slow_rc_osc(hw) container_of(hw, struct clk_slow_rc_osc, hw) + +struct clk_sam9260_slow { + struct clk_hw hw; + struct at91_pmc *pmc; +}; + +#define to_clk_sam9260_slow(hw) container_of(hw, struct clk_sam9260_slow, hw) + +struct clk_sam9x5_slow { + struct clk_hw hw; + void __iomem *sckcr; + u8 parent; +}; + +#define to_clk_sam9x5_slow(hw) container_of(hw, struct clk_sam9x5_slow, hw) + + +static int clk_slow_osc_prepare(struct clk_hw *hw) +{ + struct clk_slow_osc *osc = to_clk_slow_osc(hw); + void __iomem *sckcr = osc->sckcr; + u32 tmp = readl(sckcr); + + if (tmp & AT91_SCKC_OSC32BYP) + return 0; + + writel(tmp | AT91_SCKC_OSC32EN, sckcr); + + usleep_range(osc->startup_usec, osc->startup_usec + 1); + + return 0; +} + +static void clk_slow_osc_unprepare(struct clk_hw *hw) +{ + struct clk_slow_osc *osc = to_clk_slow_osc(hw); + void __iomem *sckcr = osc->sckcr; + u32 tmp = readl(sckcr); + + if (tmp & AT91_SCKC_OSC32BYP) + return; + + writel(tmp & ~AT91_SCKC_OSC32EN, sckcr); +} + +static int clk_slow_osc_is_prepared(struct clk_hw *hw) +{ + struct clk_slow_osc *osc = to_clk_slow_osc(hw); + void __iomem *sckcr = osc->sckcr; + u32 tmp = readl(sckcr); + + if (tmp & AT91_SCKC_OSC32BYP) + return 1; + + return !!(tmp & AT91_SCKC_OSC32EN); +} + +static const struct clk_ops slow_osc_ops = { + .prepare = clk_slow_osc_prepare, + .unprepare = clk_slow_osc_unprepare, + .is_prepared = clk_slow_osc_is_prepared, +}; + +static struct clk * __init +at91_clk_register_slow_osc(void __iomem *sckcr, + const char *name, + const char *parent_name, + unsigned long startup, + bool bypass) +{ + struct clk_slow_osc *osc; + struct clk *clk = NULL; + struct clk_init_data init; + + if (!sckcr || !name || !parent_name) + return ERR_PTR(-EINVAL); + + osc = kzalloc(sizeof(*osc), GFP_KERNEL); + if (!osc) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &slow_osc_ops; + init.parent_names = &parent_name; + init.num_parents = 1; + init.flags = CLK_IGNORE_UNUSED; + + osc->hw.init = &init; + osc->sckcr = sckcr; + osc->startup_usec = startup; + + if (bypass) + writel((readl(sckcr) & ~AT91_SCKC_OSC32EN) | AT91_SCKC_OSC32BYP, + sckcr); + + clk = clk_register(NULL, &osc->hw); + if (IS_ERR(clk)) + kfree(osc); + + return clk; +} + +void __init of_at91sam9x5_clk_slow_osc_setup(struct device_node *np, + void __iomem *sckcr) +{ + struct clk *clk; + const char *parent_name; + const char *name = np->name; + u32 startup; + bool bypass; + + parent_name = of_clk_get_parent_name(np, 0); + of_property_read_string(np, "clock-output-names", &name); + of_property_read_u32(np, "atmel,startup-time-usec", &startup); + bypass = of_property_read_bool(np, "atmel,osc-bypass"); + + clk = at91_clk_register_slow_osc(sckcr, name, parent_name, startup, + bypass); + if (IS_ERR(clk)) + return; + + of_clk_add_provider(np, of_clk_src_simple_get, clk); +} + +static unsigned long clk_slow_rc_osc_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_slow_rc_osc *osc = to_clk_slow_rc_osc(hw); + + return osc->frequency; +} + +static unsigned long clk_slow_rc_osc_recalc_accuracy(struct clk_hw *hw, + unsigned long parent_acc) +{ + struct clk_slow_rc_osc *osc = to_clk_slow_rc_osc(hw); + + return osc->accuracy; +} + +static int clk_slow_rc_osc_prepare(struct clk_hw *hw) +{ + struct clk_slow_rc_osc *osc = to_clk_slow_rc_osc(hw); + void __iomem *sckcr = osc->sckcr; + + writel(readl(sckcr) | AT91_SCKC_RCEN, sckcr); + + usleep_range(osc->startup_usec, osc->startup_usec + 1); + + return 0; +} + +static void clk_slow_rc_osc_unprepare(struct clk_hw *hw) +{ + struct clk_slow_rc_osc *osc = to_clk_slow_rc_osc(hw); + void __iomem *sckcr = osc->sckcr; + + writel(readl(sckcr) & ~AT91_SCKC_RCEN, sckcr); +} + +static int clk_slow_rc_osc_is_prepared(struct clk_hw *hw) +{ + struct clk_slow_rc_osc *osc = to_clk_slow_rc_osc(hw); + + return !!(readl(osc->sckcr) & AT91_SCKC_RCEN); +} + +static const struct clk_ops slow_rc_osc_ops = { + .prepare = clk_slow_rc_osc_prepare, + .unprepare = clk_slow_rc_osc_unprepare, + .is_prepared = clk_slow_rc_osc_is_prepared, + .recalc_rate = clk_slow_rc_osc_recalc_rate, + .recalc_accuracy = clk_slow_rc_osc_recalc_accuracy, +}; + +static struct clk * __init +at91_clk_register_slow_rc_osc(void __iomem *sckcr, + const char *name, + unsigned long frequency, + unsigned long accuracy, + unsigned long startup) +{ + struct clk_slow_rc_osc *osc; + struct clk *clk = NULL; + struct clk_init_data init; + + if (!sckcr || !name) + return ERR_PTR(-EINVAL); + + osc = kzalloc(sizeof(*osc), GFP_KERNEL); + if (!osc) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &slow_rc_osc_ops; + init.parent_names = NULL; + init.num_parents = 0; + init.flags = CLK_IS_ROOT | CLK_IGNORE_UNUSED; + + osc->hw.init = &init; + osc->sckcr = sckcr; + osc->frequency = frequency; + osc->accuracy = accuracy; + osc->startup_usec = startup; + + clk = clk_register(NULL, &osc->hw); + if (IS_ERR(clk)) + kfree(osc); + + return clk; +} + +void __init of_at91sam9x5_clk_slow_rc_osc_setup(struct device_node *np, + void __iomem *sckcr) +{ + struct clk *clk; + u32 frequency = 0; + u32 accuracy = 0; + u32 startup = 0; + const char *name = np->name; + + of_property_read_string(np, "clock-output-names", &name); + of_property_read_u32(np, "clock-frequency", &frequency); + of_property_read_u32(np, "clock-accuracy", &accuracy); + of_property_read_u32(np, "atmel,startup-time-usec", &startup); + + clk = at91_clk_register_slow_rc_osc(sckcr, name, frequency, accuracy, + startup); + if (IS_ERR(clk)) + return; + + of_clk_add_provider(np, of_clk_src_simple_get, clk); +} + +static int clk_sam9x5_slow_set_parent(struct clk_hw *hw, u8 index) +{ + struct clk_sam9x5_slow *slowck = to_clk_sam9x5_slow(hw); + void __iomem *sckcr = slowck->sckcr; + u32 tmp; + + if (index > 1) + return -EINVAL; + + tmp = readl(sckcr); + + if ((!index && !(tmp & AT91_SCKC_OSCSEL)) || + (index && (tmp & AT91_SCKC_OSCSEL))) + return 0; + + if (index) + tmp |= AT91_SCKC_OSCSEL; + else + tmp &= ~AT91_SCKC_OSCSEL; + + writel(tmp, sckcr); + + usleep_range(SLOWCK_SW_TIME_USEC, SLOWCK_SW_TIME_USEC + 1); + + return 0; +} + +static u8 clk_sam9x5_slow_get_parent(struct clk_hw *hw) +{ + struct clk_sam9x5_slow *slowck = to_clk_sam9x5_slow(hw); + + return !!(readl(slowck->sckcr) & AT91_SCKC_OSCSEL); +} + +static const struct clk_ops sam9x5_slow_ops = { + .set_parent = clk_sam9x5_slow_set_parent, + .get_parent = clk_sam9x5_slow_get_parent, +}; + +static struct clk * __init +at91_clk_register_sam9x5_slow(void __iomem *sckcr, + const char *name, + const char **parent_names, + int num_parents) +{ + struct clk_sam9x5_slow *slowck; + struct clk *clk = NULL; + struct clk_init_data init; + + if (!sckcr || !name || !parent_names || !num_parents) + return ERR_PTR(-EINVAL); + + slowck = kzalloc(sizeof(*slowck), GFP_KERNEL); + if (!slowck) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &sam9x5_slow_ops; + init.parent_names = parent_names; + init.num_parents = num_parents; + init.flags = 0; + + slowck->hw.init = &init; + slowck->sckcr = sckcr; + slowck->parent = !!(readl(sckcr) & AT91_SCKC_OSCSEL); + + clk = clk_register(NULL, &slowck->hw); + if (IS_ERR(clk)) + kfree(slowck); + + return clk; +} + +void __init of_at91sam9x5_clk_slow_setup(struct device_node *np, + void __iomem *sckcr) +{ + struct clk *clk; + const char *parent_names[2]; + int num_parents; + const char *name = np->name; + int i; + + num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells"); + if (num_parents <= 0 || num_parents > 2) + return; + + for (i = 0; i < num_parents; ++i) { + parent_names[i] = of_clk_get_parent_name(np, i); + if (!parent_names[i]) + return; + } + + of_property_read_string(np, "clock-output-names", &name); + + clk = at91_clk_register_sam9x5_slow(sckcr, name, parent_names, + num_parents); + if (IS_ERR(clk)) + return; + + of_clk_add_provider(np, of_clk_src_simple_get, clk); +} + +static u8 clk_sam9260_slow_get_parent(struct clk_hw *hw) +{ + struct clk_sam9260_slow *slowck = to_clk_sam9260_slow(hw); + + return !!(pmc_read(slowck->pmc, AT91_PMC_SR) & AT91_PMC_OSCSEL); +} + +static const struct clk_ops sam9260_slow_ops = { + .get_parent = clk_sam9260_slow_get_parent, +}; + +static struct clk * __init +at91_clk_register_sam9260_slow(struct at91_pmc *pmc, + const char *name, + const char **parent_names, + int num_parents) +{ + struct clk_sam9260_slow *slowck; + struct clk *clk = NULL; + struct clk_init_data init; + + if (!pmc || !name) + return ERR_PTR(-EINVAL); + + if (!parent_names || !num_parents) + return ERR_PTR(-EINVAL); + + slowck = kzalloc(sizeof(*slowck), GFP_KERNEL); + if (!slowck) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &sam9260_slow_ops; + init.parent_names = parent_names; + init.num_parents = num_parents; + init.flags = 0; + + slowck->hw.init = &init; + slowck->pmc = pmc; + + clk = clk_register(NULL, &slowck->hw); + if (IS_ERR(clk)) + kfree(slowck); + + return clk; +} + +void __init of_at91sam9260_clk_slow_setup(struct device_node *np, + struct at91_pmc *pmc) +{ + struct clk *clk; + const char *parent_names[2]; + int num_parents; + const char *name = np->name; + int i; + + num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells"); + if (num_parents <= 0 || num_parents > 1) + return; + + for (i = 0; i < num_parents; ++i) { + parent_names[i] = of_clk_get_parent_name(np, i); + if (!parent_names[i]) + return; + } + + of_property_read_string(np, "clock-output-names", &name); + + clk = at91_clk_register_sam9260_slow(pmc, name, parent_names, + num_parents); + if (IS_ERR(clk)) + return; + + of_clk_add_provider(np, of_clk_src_simple_get, clk); +} diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c index 6a61477a57e0..524196bb35a5 100644 --- a/drivers/clk/at91/pmc.c +++ b/drivers/clk/at91/pmc.c @@ -229,11 +229,28 @@ out_free_pmc: } static const struct of_device_id pmc_clk_ids[] __initconst = { + /* Slow oscillator */ + { + .compatible = "atmel,at91sam9260-clk-slow", + .data = of_at91sam9260_clk_slow_setup, + }, /* Main clock */ { + .compatible = "atmel,at91rm9200-clk-main-osc", + .data = of_at91rm9200_clk_main_osc_setup, + }, + { + .compatible = "atmel,at91sam9x5-clk-main-rc-osc", + .data = of_at91sam9x5_clk_main_rc_osc_setup, + }, + { .compatible = "atmel,at91rm9200-clk-main", .data = of_at91rm9200_clk_main_setup, }, + { + .compatible = "atmel,at91sam9x5-clk-main", + .data = of_at91sam9x5_clk_main_setup, + }, /* PLL clocks */ { .compatible = "atmel,at91rm9200-clk-pll", diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h index 441350983ccb..6c7625976113 100644 --- a/drivers/clk/at91/pmc.h +++ b/drivers/clk/at91/pmc.h @@ -58,8 +58,17 @@ static inline void pmc_write(struct at91_pmc *pmc, int offset, u32 value) int of_at91_get_clk_range(struct device_node *np, const char *propname, struct clk_range *range); +extern void __init of_at91sam9260_clk_slow_setup(struct device_node *np, + struct at91_pmc *pmc); + +extern void __init of_at91rm9200_clk_main_osc_setup(struct device_node *np, + struct at91_pmc *pmc); +extern void __init of_at91sam9x5_clk_main_rc_osc_setup(struct device_node *np, + struct at91_pmc *pmc); extern void __init of_at91rm9200_clk_main_setup(struct device_node *np, struct at91_pmc *pmc); +extern void __init of_at91sam9x5_clk_main_setup(struct device_node *np, + struct at91_pmc *pmc); extern void __init of_at91rm9200_clk_pll_setup(struct device_node *np, struct at91_pmc *pmc); diff --git a/drivers/clk/at91/sckc.c b/drivers/clk/at91/sckc.c new file mode 100644 index 000000000000..1184d76a7ab7 --- /dev/null +++ b/drivers/clk/at91/sckc.c @@ -0,0 +1,57 @@ +/* + * drivers/clk/at91/sckc.c + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/io.h> + +#include "sckc.h" + +static const struct of_device_id sckc_clk_ids[] __initconst = { + /* Slow clock */ + { + .compatible = "atmel,at91sam9x5-clk-slow-osc", + .data = of_at91sam9x5_clk_slow_osc_setup, + }, + { + .compatible = "atmel,at91sam9x5-clk-slow-rc-osc", + .data = of_at91sam9x5_clk_slow_rc_osc_setup, + }, + { + .compatible = "atmel,at91sam9x5-clk-slow", + .data = of_at91sam9x5_clk_slow_setup, + }, + { /*sentinel*/ } +}; + +static void __init of_at91sam9x5_sckc_setup(struct device_node *np) +{ + struct device_node *childnp; + void (*clk_setup)(struct device_node *, void __iomem *); + const struct of_device_id *clk_id; + void __iomem *regbase = of_iomap(np, 0); + + if (!regbase) + return; + + for_each_child_of_node(np, childnp) { + clk_id = of_match_node(sckc_clk_ids, childnp); + if (!clk_id) + continue; + clk_setup = clk_id->data; + clk_setup(childnp, regbase); + } +} +CLK_OF_DECLARE(at91sam9x5_clk_sckc, "atmel,at91sam9x5-sckc", + of_at91sam9x5_sckc_setup); diff --git a/drivers/clk/at91/sckc.h b/drivers/clk/at91/sckc.h new file mode 100644 index 000000000000..836fcf59820f --- /dev/null +++ b/drivers/clk/at91/sckc.h @@ -0,0 +1,22 @@ +/* + * drivers/clk/at91/sckc.h + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __AT91_SCKC_H_ +#define __AT91_SCKC_H_ + +extern void __init of_at91sam9x5_clk_slow_osc_setup(struct device_node *np, + void __iomem *sckcr); +extern void __init of_at91sam9x5_clk_slow_rc_osc_setup(struct device_node *np, + void __iomem *sckcr); +extern void __init of_at91sam9x5_clk_slow_setup(struct device_node *np, + void __iomem *sckcr); + +#endif /* __AT91_SCKC_H_ */ diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 89777ed9abd8..3b5bacd4d8da 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -31,7 +31,108 @@ #include <linux/iio/trigger_consumer.h> #include <linux/iio/triggered_buffer.h> -#include <mach/at91_adc.h> +/* Registers */ +#define AT91_ADC_CR 0x00 /* Control Register */ +#define AT91_ADC_SWRST (1 << 0) /* Software Reset */ +#define AT91_ADC_START (1 << 1) /* Start Conversion */ + +#define AT91_ADC_MR 0x04 /* Mode Register */ +#define AT91_ADC_TSAMOD (3 << 0) /* ADC mode */ +#define AT91_ADC_TSAMOD_ADC_ONLY_MODE (0 << 0) /* ADC Mode */ +#define AT91_ADC_TSAMOD_TS_ONLY_MODE (1 << 0) /* Touch Screen Only Mode */ +#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */ +#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */ +#define AT91_ADC_TRGSEL_TC0 (0 << 1) +#define AT91_ADC_TRGSEL_TC1 (1 << 1) +#define AT91_ADC_TRGSEL_TC2 (2 << 1) +#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1) +#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */ +#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */ +#define AT91_ADC_PENDET (1 << 6) /* Pen contact detection enable */ +#define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar Rate Selection */ +#define AT91_ADC_PRESCAL_9G45 (0xff << 8) +#define AT91_ADC_PRESCAL_(x) ((x) << 8) +#define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up Time */ +#define AT91_ADC_STARTUP_9G45 (0x7f << 16) +#define AT91_ADC_STARTUP_9X5 (0xf << 16) +#define AT91_ADC_STARTUP_(x) ((x) << 16) +#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */ +#define AT91_ADC_SHTIM_(x) ((x) << 24) +#define AT91_ADC_PENDBC (0x0f << 28) /* Pen Debounce time */ +#define AT91_ADC_PENDBC_(x) ((x) << 28) + +#define AT91_ADC_TSR 0x0C +#define AT91_ADC_TSR_SHTIM (0xf << 24) /* Sample & Hold Time */ +#define AT91_ADC_TSR_SHTIM_(x) ((x) << 24) + +#define AT91_ADC_CHER 0x10 /* Channel Enable Register */ +#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */ +#define AT91_ADC_CHSR 0x18 /* Channel Status Register */ +#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */ + +#define AT91_ADC_SR 0x1C /* Status Register */ +#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */ +#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */ +#define AT91_ADC_DRDY (1 << 16) /* Data Ready */ +#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */ +#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */ +#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */ + +#define AT91_ADC_SR_9X5 0x30 /* Status Register for 9x5 */ +#define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */ + +#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */ +#define AT91_ADC_LDATA (0x3ff) + +#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */ +#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */ +#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */ +#define AT91RL_ADC_IER_PEN (1 << 20) +#define AT91RL_ADC_IER_NOPEN (1 << 21) +#define AT91_ADC_IER_PEN (1 << 29) +#define AT91_ADC_IER_NOPEN (1 << 30) +#define AT91_ADC_IER_XRDY (1 << 20) +#define AT91_ADC_IER_YRDY (1 << 21) +#define AT91_ADC_IER_PRDY (1 << 22) +#define AT91_ADC_ISR_PENS (1 << 31) + +#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */ +#define AT91_ADC_DATA (0x3ff) + +#define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */ + +#define AT91_ADC_ACR 0x94 /* Analog Control Register */ +#define AT91_ADC_ACR_PENDETSENS (0x3 << 0) /* pull-up resistor */ + +#define AT91_ADC_TSMR 0xB0 +#define AT91_ADC_TSMR_TSMODE (3 << 0) /* Touch Screen Mode */ +#define AT91_ADC_TSMR_TSMODE_NONE (0 << 0) +#define AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS (1 << 0) +#define AT91_ADC_TSMR_TSMODE_4WIRE_PRESS (2 << 0) +#define AT91_ADC_TSMR_TSMODE_5WIRE (3 << 0) +#define AT91_ADC_TSMR_TSAV (3 << 4) /* Averages samples */ +#define AT91_ADC_TSMR_TSAV_(x) ((x) << 4) +#define AT91_ADC_TSMR_SCTIM (0x0f << 16) /* Switch closure time */ +#define AT91_ADC_TSMR_PENDBC (0x0f << 28) /* Pen Debounce time */ +#define AT91_ADC_TSMR_PENDBC_(x) ((x) << 28) +#define AT91_ADC_TSMR_NOTSDMA (1 << 22) /* No Touchscreen DMA */ +#define AT91_ADC_TSMR_PENDET_DIS (0 << 24) /* Pen contact detection disable */ +#define AT91_ADC_TSMR_PENDET_ENA (1 << 24) /* Pen contact detection enable */ + +#define AT91_ADC_TSXPOSR 0xB4 +#define AT91_ADC_TSYPOSR 0xB8 +#define AT91_ADC_TSPRESSR 0xBC + +#define AT91_ADC_TRGR_9260 AT91_ADC_MR +#define AT91_ADC_TRGR_9G45 0x08 +#define AT91_ADC_TRGR_9X5 0xC0 + +/* Trigger Register bit field */ +#define AT91_ADC_TRGR_TRGPER (0xffff << 16) +#define AT91_ADC_TRGR_TRGPER_(x) ((x) << 16) +#define AT91_ADC_TRGR_TRGMOD (0x7 << 0) +#define AT91_ADC_TRGR_NONE (0 << 0) +#define AT91_ADC_TRGR_MOD_PERIOD_TRIG (5 << 0) #define AT91_ADC_CHAN(st, ch) \ (st->registers->channel_base + (ch * 4)) @@ -46,6 +147,29 @@ #define TOUCH_SAMPLE_PERIOD_US 2000 /* 2ms */ #define TOUCH_PEN_DETECT_DEBOUNCE_US 200 +#define MAX_RLPOS_BITS 10 +#define TOUCH_SAMPLE_PERIOD_US_RL 10000 /* 10ms, the SoC can't keep up with 2ms */ +#define TOUCH_SHTIM 0xa + +/** + * struct at91_adc_reg_desc - Various informations relative to registers + * @channel_base: Base offset for the channel data registers + * @drdy_mask: Mask of the DRDY field in the relevant registers + (Interruptions registers mostly) + * @status_register: Offset of the Interrupt Status Register + * @trigger_register: Offset of the Trigger setup register + * @mr_prescal_mask: Mask of the PRESCAL field in the adc MR register + * @mr_startup_mask: Mask of the STARTUP field in the adc MR register + */ +struct at91_adc_reg_desc { + u8 channel_base; + u32 drdy_mask; + u8 status_register; + u8 trigger_register; + u32 mr_prescal_mask; + u32 mr_startup_mask; +}; + struct at91_adc_caps { bool has_ts; /* Support touch screen */ bool has_tsmr; /* only at91sam9x5, sama5d3 have TSMR reg */ @@ -64,12 +188,6 @@ struct at91_adc_caps { struct at91_adc_reg_desc registers; }; -enum atmel_adc_ts_type { - ATMEL_ADC_TOUCHSCREEN_NONE = 0, - ATMEL_ADC_TOUCHSCREEN_4WIRE = 4, - ATMEL_ADC_TOUCHSCREEN_5WIRE = 5, -}; - struct at91_adc_state { struct clk *adc_clk; u16 *buffer; @@ -114,6 +232,11 @@ struct at91_adc_state { u16 ts_sample_period_val; u32 ts_pressure_threshold; + u16 ts_pendbc; + + bool ts_bufferedmeasure; + u32 ts_prev_absx; + u32 ts_prev_absy; }; static irqreturn_t at91_adc_trigger_handler(int irq, void *p) @@ -220,7 +343,72 @@ static int at91_ts_sample(struct at91_adc_state *st) return 0; } -static irqreturn_t at91_adc_interrupt(int irq, void *private) +static irqreturn_t at91_adc_rl_interrupt(int irq, void *private) +{ + struct iio_dev *idev = private; + struct at91_adc_state *st = iio_priv(idev); + u32 status = at91_adc_readl(st, st->registers->status_register); + unsigned int reg; + + status &= at91_adc_readl(st, AT91_ADC_IMR); + if (status & st->registers->drdy_mask) + handle_adc_eoc_trigger(irq, idev); + + if (status & AT91RL_ADC_IER_PEN) { + /* Disabling pen debounce is required to get a NOPEN irq */ + reg = at91_adc_readl(st, AT91_ADC_MR); + reg &= ~AT91_ADC_PENDBC; + at91_adc_writel(st, AT91_ADC_MR, reg); + + at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_PEN); + at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_NOPEN + | AT91_ADC_EOC(3)); + /* Set up period trigger for sampling */ + at91_adc_writel(st, st->registers->trigger_register, + AT91_ADC_TRGR_MOD_PERIOD_TRIG | + AT91_ADC_TRGR_TRGPER_(st->ts_sample_period_val)); + } else if (status & AT91RL_ADC_IER_NOPEN) { + reg = at91_adc_readl(st, AT91_ADC_MR); + reg |= AT91_ADC_PENDBC_(st->ts_pendbc) & AT91_ADC_PENDBC; + at91_adc_writel(st, AT91_ADC_MR, reg); + at91_adc_writel(st, st->registers->trigger_register, + AT91_ADC_TRGR_NONE); + + at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_NOPEN + | AT91_ADC_EOC(3)); + at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_PEN); + st->ts_bufferedmeasure = false; + input_report_key(st->ts_input, BTN_TOUCH, 0); + input_sync(st->ts_input); + } else if (status & AT91_ADC_EOC(3)) { + /* Conversion finished */ + if (st->ts_bufferedmeasure) { + /* + * Last measurement is always discarded, since it can + * be erroneous. + * Always report previous measurement + */ + input_report_abs(st->ts_input, ABS_X, st->ts_prev_absx); + input_report_abs(st->ts_input, ABS_Y, st->ts_prev_absy); + input_report_key(st->ts_input, BTN_TOUCH, 1); + input_sync(st->ts_input); + } else + st->ts_bufferedmeasure = true; + + /* Now make new measurement */ + st->ts_prev_absx = at91_adc_readl(st, AT91_ADC_CHAN(st, 3)) + << MAX_RLPOS_BITS; + st->ts_prev_absx /= at91_adc_readl(st, AT91_ADC_CHAN(st, 2)); + + st->ts_prev_absy = at91_adc_readl(st, AT91_ADC_CHAN(st, 1)) + << MAX_RLPOS_BITS; + st->ts_prev_absy /= at91_adc_readl(st, AT91_ADC_CHAN(st, 0)); + } + + return IRQ_HANDLED; +} + +static irqreturn_t at91_adc_9x5_interrupt(int irq, void *private) { struct iio_dev *idev = private; struct at91_adc_state *st = iio_priv(idev); @@ -653,6 +841,8 @@ static int at91_adc_probe_dt_ts(struct device_node *node, return -EINVAL; } + if (!st->caps->has_tsmr) + return 0; prop = 0; of_property_read_u32(node, "atmel,adc-ts-pressure-threshold", &prop); st->ts_pressure_threshold = prop; @@ -776,6 +966,7 @@ static int at91_adc_probe_pdata(struct at91_adc_state *st, st->trigger_number = pdata->trigger_number; st->trigger_list = pdata->trigger_list; st->registers = &st->caps->registers; + st->touchscreen_type = pdata->touchscreen_type; return 0; } @@ -790,7 +981,10 @@ static int atmel_ts_open(struct input_dev *dev) { struct at91_adc_state *st = input_get_drvdata(dev); - at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_PEN); + if (st->caps->has_tsmr) + at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_PEN); + else + at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_PEN); return 0; } @@ -798,45 +992,61 @@ static void atmel_ts_close(struct input_dev *dev) { struct at91_adc_state *st = input_get_drvdata(dev); - at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_PEN); + if (st->caps->has_tsmr) + at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_PEN); + else + at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_PEN); } static int at91_ts_hw_init(struct at91_adc_state *st, u32 adc_clk_khz) { - u32 reg = 0, pendbc; + u32 reg = 0; int i = 0; - if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_4WIRE) - reg = AT91_ADC_TSMR_TSMODE_4WIRE_PRESS; - else - reg = AT91_ADC_TSMR_TSMODE_5WIRE; - /* a Pen Detect Debounce Time is necessary for the ADC Touch to avoid * pen detect noise. * The formula is : Pen Detect Debounce Time = (2 ^ pendbc) / ADCClock */ - pendbc = round_up(TOUCH_PEN_DETECT_DEBOUNCE_US * adc_clk_khz / 1000, 1); + st->ts_pendbc = round_up(TOUCH_PEN_DETECT_DEBOUNCE_US * adc_clk_khz / + 1000, 1); - while (pendbc >> ++i) + while (st->ts_pendbc >> ++i) ; /* Empty! Find the shift offset */ - if (abs(pendbc - (1 << i)) < abs(pendbc - (1 << (i - 1)))) - pendbc = i; + if (abs(st->ts_pendbc - (1 << i)) < abs(st->ts_pendbc - (1 << (i - 1)))) + st->ts_pendbc = i; else - pendbc = i - 1; + st->ts_pendbc = i - 1; - if (st->caps->has_tsmr) { - reg |= AT91_ADC_TSMR_TSAV_(st->caps->ts_filter_average) - & AT91_ADC_TSMR_TSAV; - reg |= AT91_ADC_TSMR_PENDBC_(pendbc) & AT91_ADC_TSMR_PENDBC; - reg |= AT91_ADC_TSMR_NOTSDMA; - reg |= AT91_ADC_TSMR_PENDET_ENA; - reg |= 0x03 << 8; /* TSFREQ, need bigger than TSAV */ - - at91_adc_writel(st, AT91_ADC_TSMR, reg); - } else { - /* TODO: for 9g45 which has no TSMR */ + if (!st->caps->has_tsmr) { + reg = at91_adc_readl(st, AT91_ADC_MR); + reg |= AT91_ADC_TSAMOD_TS_ONLY_MODE | AT91_ADC_PENDET; + + reg |= AT91_ADC_PENDBC_(st->ts_pendbc) & AT91_ADC_PENDBC; + at91_adc_writel(st, AT91_ADC_MR, reg); + + reg = AT91_ADC_TSR_SHTIM_(TOUCH_SHTIM) & AT91_ADC_TSR_SHTIM; + at91_adc_writel(st, AT91_ADC_TSR, reg); + + st->ts_sample_period_val = round_up((TOUCH_SAMPLE_PERIOD_US_RL * + adc_clk_khz / 1000) - 1, 1); + + return 0; } + if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_4WIRE) + reg = AT91_ADC_TSMR_TSMODE_4WIRE_PRESS; + else + reg = AT91_ADC_TSMR_TSMODE_5WIRE; + + reg |= AT91_ADC_TSMR_TSAV_(st->caps->ts_filter_average) + & AT91_ADC_TSMR_TSAV; + reg |= AT91_ADC_TSMR_PENDBC_(st->ts_pendbc) & AT91_ADC_TSMR_PENDBC; + reg |= AT91_ADC_TSMR_NOTSDMA; + reg |= AT91_ADC_TSMR_PENDET_ENA; + reg |= 0x03 << 8; /* TSFREQ, needs to be bigger than TSAV */ + + at91_adc_writel(st, AT91_ADC_TSMR, reg); + /* Change adc internal resistor value for better pen detection, * default value is 100 kOhm. * 0 = 200 kOhm, 1 = 150 kOhm, 2 = 100 kOhm, 3 = 50 kOhm @@ -845,7 +1055,7 @@ static int at91_ts_hw_init(struct at91_adc_state *st, u32 adc_clk_khz) at91_adc_writel(st, AT91_ADC_ACR, st->caps->ts_pen_detect_sensitivity & AT91_ADC_ACR_PENDETSENS); - /* Sample Peroid Time = (TRGPER + 1) / ADCClock */ + /* Sample Period Time = (TRGPER + 1) / ADCClock */ st->ts_sample_period_val = round_up((TOUCH_SAMPLE_PERIOD_US * adc_clk_khz / 1000) - 1, 1); @@ -874,18 +1084,38 @@ static int at91_ts_register(struct at91_adc_state *st, __set_bit(EV_ABS, input->evbit); __set_bit(EV_KEY, input->evbit); __set_bit(BTN_TOUCH, input->keybit); - input_set_abs_params(input, ABS_X, 0, (1 << MAX_POS_BITS) - 1, 0, 0); - input_set_abs_params(input, ABS_Y, 0, (1 << MAX_POS_BITS) - 1, 0, 0); - input_set_abs_params(input, ABS_PRESSURE, 0, 0xffffff, 0, 0); + if (st->caps->has_tsmr) { + input_set_abs_params(input, ABS_X, 0, (1 << MAX_POS_BITS) - 1, + 0, 0); + input_set_abs_params(input, ABS_Y, 0, (1 << MAX_POS_BITS) - 1, + 0, 0); + input_set_abs_params(input, ABS_PRESSURE, 0, 0xffffff, 0, 0); + } else { + if (st->touchscreen_type != ATMEL_ADC_TOUCHSCREEN_4WIRE) { + dev_err(&pdev->dev, + "This touchscreen controller only support 4 wires\n"); + ret = -EINVAL; + goto err; + } + + input_set_abs_params(input, ABS_X, 0, (1 << MAX_RLPOS_BITS) - 1, + 0, 0); + input_set_abs_params(input, ABS_Y, 0, (1 << MAX_RLPOS_BITS) - 1, + 0, 0); + } st->ts_input = input; input_set_drvdata(input, st); ret = input_register_device(input); if (ret) - input_free_device(st->ts_input); + goto err; return ret; + +err: + input_free_device(st->ts_input); + return ret; } static void at91_ts_unregister(struct at91_adc_state *st) @@ -943,11 +1173,13 @@ static int at91_adc_probe(struct platform_device *pdev) */ at91_adc_writel(st, AT91_ADC_CR, AT91_ADC_SWRST); at91_adc_writel(st, AT91_ADC_IDR, 0xFFFFFFFF); - ret = request_irq(st->irq, - at91_adc_interrupt, - 0, - pdev->dev.driver->name, - idev); + + if (st->caps->has_tsmr) + ret = request_irq(st->irq, at91_adc_9x5_interrupt, 0, + pdev->dev.driver->name, idev); + else + ret = request_irq(st->irq, at91_adc_rl_interrupt, 0, + pdev->dev.driver->name, idev); if (ret) { dev_err(&pdev->dev, "Failed to allocate IRQ.\n"); return ret; @@ -1051,12 +1283,6 @@ static int at91_adc_probe(struct platform_device *pdev) goto error_disable_adc_clk; } } else { - if (!st->caps->has_tsmr) { - dev_err(&pdev->dev, "We don't support non-TSMR adc\n"); - ret = -ENODEV; - goto error_disable_adc_clk; - } - ret = at91_ts_register(st, pdev); if (ret) goto error_disable_adc_clk; @@ -1120,6 +1346,20 @@ static struct at91_adc_caps at91sam9260_caps = { }, }; +static struct at91_adc_caps at91sam9rl_caps = { + .has_ts = true, + .calc_startup_ticks = calc_startup_ticks_9260, /* same as 9260 */ + .num_channels = 6, + .registers = { + .channel_base = AT91_ADC_CHR(0), + .drdy_mask = AT91_ADC_DRDY, + .status_register = AT91_ADC_SR, + .trigger_register = AT91_ADC_TRGR_9G45, + .mr_prescal_mask = AT91_ADC_PRESCAL_9260, + .mr_startup_mask = AT91_ADC_STARTUP_9G45, + }, +}; + static struct at91_adc_caps at91sam9g45_caps = { .has_ts = true, .calc_startup_ticks = calc_startup_ticks_9260, /* same as 9260 */ @@ -1154,6 +1394,7 @@ static struct at91_adc_caps at91sam9x5_caps = { static const struct of_device_id at91_adc_dt_ids[] = { { .compatible = "atmel,at91sam9260-adc", .data = &at91sam9260_caps }, + { .compatible = "atmel,at91sam9rl-adc", .data = &at91sam9rl_caps }, { .compatible = "atmel,at91sam9g45-adc", .data = &at91sam9g45_caps }, { .compatible = "atmel,at91sam9x5-adc", .data = &at91sam9x5_caps }, {}, @@ -1165,6 +1406,9 @@ static const struct platform_device_id at91_adc_ids[] = { .name = "at91sam9260-adc", .driver_data = (unsigned long)&at91sam9260_caps, }, { + .name = "at91sam9rl-adc", + .driver_data = (unsigned long)&at91sam9rl_caps, + }, { .name = "at91sam9g45-adc", .driver_data = (unsigned long)&at91sam9g45_caps, }, { diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 68edc9db2c64..0b5965ba51bc 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -550,18 +550,6 @@ config TOUCHSCREEN_TI_AM335X_TSC To compile this driver as a module, choose M here: the module will be called ti_am335x_tsc. -config TOUCHSCREEN_ATMEL_TSADCC - tristate "Atmel Touchscreen Interface" - depends on ARCH_AT91 - help - Say Y here if you have a 4-wire touchscreen connected to the - ADC Controller on your Atmel SoC. - - If unsure, say N. - - To compile this driver as a module, choose M here: the - module will be called atmel_tsadcc. - config TOUCHSCREEN_UCB1400 tristate "Philips UCB1400 touchscreen" depends on AC97_BUS diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 4bc954b7c7c3..03f12a1f2218 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_TOUCHSCREEN_AD7879_I2C) += ad7879-i2c.o obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI) += ad7879-spi.o obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o -obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c deleted file mode 100644 index a7c9d6967d1e..000000000000 --- a/drivers/input/touchscreen/atmel_tsadcc.c +++ /dev/null @@ -1,358 +0,0 @@ -/* - * Atmel Touch Screen Driver - * - * Copyright (c) 2008 ATMEL - * Copyright (c) 2008 Dan Liang - * Copyright (c) 2008 TimeSys Corporation - * Copyright (c) 2008 Justin Waters - * - * Based on touchscreen code from Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/err.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/input.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/platform_data/atmel.h> -#include <mach/cpu.h> - -/* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */ - -#define ATMEL_TSADCC_CR 0x00 /* Control register */ -#define ATMEL_TSADCC_SWRST (1 << 0) /* Software Reset*/ -#define ATMEL_TSADCC_START (1 << 1) /* Start conversion */ - -#define ATMEL_TSADCC_MR 0x04 /* Mode register */ -#define ATMEL_TSADCC_TSAMOD (3 << 0) /* ADC mode */ -#define ATMEL_TSADCC_TSAMOD_ADC_ONLY_MODE (0x0) /* ADC Mode */ -#define ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE (0x1) /* Touch Screen Only Mode */ -#define ATMEL_TSADCC_LOWRES (1 << 4) /* Resolution selection */ -#define ATMEL_TSADCC_SLEEP (1 << 5) /* Sleep mode */ -#define ATMEL_TSADCC_PENDET (1 << 6) /* Pen Detect selection */ -#define ATMEL_TSADCC_PRES (1 << 7) /* Pressure Measurement Selection */ -#define ATMEL_TSADCC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */ -#define ATMEL_TSADCC_EPRESCAL (0xff << 8) /* Prescalar Rate Selection (Extended) */ -#define ATMEL_TSADCC_STARTUP (0x7f << 16) /* Start Up time */ -#define ATMEL_TSADCC_SHTIM (0xf << 24) /* Sample & Hold time */ -#define ATMEL_TSADCC_PENDBC (0xf << 28) /* Pen Detect debouncing time */ - -#define ATMEL_TSADCC_TRGR 0x08 /* Trigger register */ -#define ATMEL_TSADCC_TRGMOD (7 << 0) /* Trigger mode */ -#define ATMEL_TSADCC_TRGMOD_NONE (0 << 0) -#define ATMEL_TSADCC_TRGMOD_EXT_RISING (1 << 0) -#define ATMEL_TSADCC_TRGMOD_EXT_FALLING (2 << 0) -#define ATMEL_TSADCC_TRGMOD_EXT_ANY (3 << 0) -#define ATMEL_TSADCC_TRGMOD_PENDET (4 << 0) -#define ATMEL_TSADCC_TRGMOD_PERIOD (5 << 0) -#define ATMEL_TSADCC_TRGMOD_CONTINUOUS (6 << 0) -#define ATMEL_TSADCC_TRGPER (0xffff << 16) /* Trigger period */ - -#define ATMEL_TSADCC_TSR 0x0C /* Touch Screen register */ -#define ATMEL_TSADCC_TSFREQ (0xf << 0) /* TS Frequency in Interleaved mode */ -#define ATMEL_TSADCC_TSSHTIM (0xf << 24) /* Sample & Hold time */ - -#define ATMEL_TSADCC_CHER 0x10 /* Channel Enable register */ -#define ATMEL_TSADCC_CHDR 0x14 /* Channel Disable register */ -#define ATMEL_TSADCC_CHSR 0x18 /* Channel Status register */ -#define ATMEL_TSADCC_CH(n) (1 << (n)) /* Channel number */ - -#define ATMEL_TSADCC_SR 0x1C /* Status register */ -#define ATMEL_TSADCC_EOC(n) (1 << ((n)+0)) /* End of conversion for channel N */ -#define ATMEL_TSADCC_OVRE(n) (1 << ((n)+8)) /* Overrun error for channel N */ -#define ATMEL_TSADCC_DRDY (1 << 16) /* Data Ready */ -#define ATMEL_TSADCC_GOVRE (1 << 17) /* General Overrun Error */ -#define ATMEL_TSADCC_ENDRX (1 << 18) /* End of RX Buffer */ -#define ATMEL_TSADCC_RXBUFF (1 << 19) /* TX Buffer full */ -#define ATMEL_TSADCC_PENCNT (1 << 20) /* Pen contact */ -#define ATMEL_TSADCC_NOCNT (1 << 21) /* No contact */ - -#define ATMEL_TSADCC_LCDR 0x20 /* Last Converted Data register */ -#define ATMEL_TSADCC_DATA (0x3ff << 0) /* Channel data */ - -#define ATMEL_TSADCC_IER 0x24 /* Interrupt Enable register */ -#define ATMEL_TSADCC_IDR 0x28 /* Interrupt Disable register */ -#define ATMEL_TSADCC_IMR 0x2C /* Interrupt Mask register */ -#define ATMEL_TSADCC_CDR0 0x30 /* Channel Data 0 */ -#define ATMEL_TSADCC_CDR1 0x34 /* Channel Data 1 */ -#define ATMEL_TSADCC_CDR2 0x38 /* Channel Data 2 */ -#define ATMEL_TSADCC_CDR3 0x3C /* Channel Data 3 */ -#define ATMEL_TSADCC_CDR4 0x40 /* Channel Data 4 */ -#define ATMEL_TSADCC_CDR5 0x44 /* Channel Data 5 */ - -#define ATMEL_TSADCC_XPOS 0x50 -#define ATMEL_TSADCC_Z1DAT 0x54 -#define ATMEL_TSADCC_Z2DAT 0x58 - -#define PRESCALER_VAL(x) ((x) >> 8) - -#define ADC_DEFAULT_CLOCK 100000 - -struct atmel_tsadcc { - struct input_dev *input; - char phys[32]; - struct clk *clk; - int irq; - unsigned int prev_absx; - unsigned int prev_absy; - unsigned char bufferedmeasure; -}; - -static void __iomem *tsc_base; - -#define atmel_tsadcc_read(reg) __raw_readl(tsc_base + (reg)) -#define atmel_tsadcc_write(reg, val) __raw_writel((val), tsc_base + (reg)) - -static irqreturn_t atmel_tsadcc_interrupt(int irq, void *dev) -{ - struct atmel_tsadcc *ts_dev = (struct atmel_tsadcc *)dev; - struct input_dev *input_dev = ts_dev->input; - - unsigned int status; - unsigned int reg; - - status = atmel_tsadcc_read(ATMEL_TSADCC_SR); - status &= atmel_tsadcc_read(ATMEL_TSADCC_IMR); - - if (status & ATMEL_TSADCC_NOCNT) { - /* Contact lost */ - reg = atmel_tsadcc_read(ATMEL_TSADCC_MR) | ATMEL_TSADCC_PENDBC; - - atmel_tsadcc_write(ATMEL_TSADCC_MR, reg); - atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE); - atmel_tsadcc_write(ATMEL_TSADCC_IDR, - ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT); - atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT); - - input_report_key(input_dev, BTN_TOUCH, 0); - ts_dev->bufferedmeasure = 0; - input_sync(input_dev); - - } else if (status & ATMEL_TSADCC_PENCNT) { - /* Pen detected */ - reg = atmel_tsadcc_read(ATMEL_TSADCC_MR); - reg &= ~ATMEL_TSADCC_PENDBC; - - atmel_tsadcc_write(ATMEL_TSADCC_IDR, ATMEL_TSADCC_PENCNT); - atmel_tsadcc_write(ATMEL_TSADCC_MR, reg); - atmel_tsadcc_write(ATMEL_TSADCC_IER, - ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT); - atmel_tsadcc_write(ATMEL_TSADCC_TRGR, - ATMEL_TSADCC_TRGMOD_PERIOD | (0x0FFF << 16)); - - } else if (status & ATMEL_TSADCC_EOC(3)) { - /* Conversion finished */ - - if (ts_dev->bufferedmeasure) { - /* Last measurement is always discarded, since it can - * be erroneous. - * Always report previous measurement */ - input_report_abs(input_dev, ABS_X, ts_dev->prev_absx); - input_report_abs(input_dev, ABS_Y, ts_dev->prev_absy); - input_report_key(input_dev, BTN_TOUCH, 1); - input_sync(input_dev); - } else - ts_dev->bufferedmeasure = 1; - - /* Now make new measurement */ - ts_dev->prev_absx = atmel_tsadcc_read(ATMEL_TSADCC_CDR3) << 10; - ts_dev->prev_absx /= atmel_tsadcc_read(ATMEL_TSADCC_CDR2); - - ts_dev->prev_absy = atmel_tsadcc_read(ATMEL_TSADCC_CDR1) << 10; - ts_dev->prev_absy /= atmel_tsadcc_read(ATMEL_TSADCC_CDR0); - } - - return IRQ_HANDLED; -} - -/* - * The functions for inserting/removing us as a module. - */ - -static int atmel_tsadcc_probe(struct platform_device *pdev) -{ - struct atmel_tsadcc *ts_dev; - struct input_dev *input_dev; - struct resource *res; - struct at91_tsadcc_data *pdata = dev_get_platdata(&pdev->dev); - int err; - unsigned int prsc; - unsigned int reg; - - if (!pdata) - return -EINVAL; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "no mmio resource defined.\n"); - return -ENXIO; - } - - /* Allocate memory for device */ - ts_dev = kzalloc(sizeof(struct atmel_tsadcc), GFP_KERNEL); - if (!ts_dev) { - dev_err(&pdev->dev, "failed to allocate memory.\n"); - return -ENOMEM; - } - platform_set_drvdata(pdev, ts_dev); - - input_dev = input_allocate_device(); - if (!input_dev) { - dev_err(&pdev->dev, "failed to allocate input device.\n"); - err = -EBUSY; - goto err_free_mem; - } - - ts_dev->irq = platform_get_irq(pdev, 0); - if (ts_dev->irq < 0) { - dev_err(&pdev->dev, "no irq ID is designated.\n"); - err = -ENODEV; - goto err_free_dev; - } - - if (!request_mem_region(res->start, resource_size(res), - "atmel tsadcc regs")) { - dev_err(&pdev->dev, "resources is unavailable.\n"); - err = -EBUSY; - goto err_free_dev; - } - - tsc_base = ioremap(res->start, resource_size(res)); - if (!tsc_base) { - dev_err(&pdev->dev, "failed to map registers.\n"); - err = -ENOMEM; - goto err_release_mem; - } - - err = request_irq(ts_dev->irq, atmel_tsadcc_interrupt, 0, - pdev->dev.driver->name, ts_dev); - if (err) { - dev_err(&pdev->dev, "failed to allocate irq.\n"); - goto err_unmap_regs; - } - - ts_dev->clk = clk_get(&pdev->dev, "tsc_clk"); - if (IS_ERR(ts_dev->clk)) { - dev_err(&pdev->dev, "failed to get ts_clk\n"); - err = PTR_ERR(ts_dev->clk); - goto err_free_irq; - } - - ts_dev->input = input_dev; - ts_dev->bufferedmeasure = 0; - - snprintf(ts_dev->phys, sizeof(ts_dev->phys), - "%s/input0", dev_name(&pdev->dev)); - - input_dev->name = "atmel touch screen controller"; - input_dev->phys = ts_dev->phys; - input_dev->dev.parent = &pdev->dev; - - __set_bit(EV_ABS, input_dev->evbit); - input_set_abs_params(input_dev, ABS_X, 0, 0x3FF, 0, 0); - input_set_abs_params(input_dev, ABS_Y, 0, 0x3FF, 0, 0); - - input_set_capability(input_dev, EV_KEY, BTN_TOUCH); - - /* clk_enable() always returns 0, no need to check it */ - clk_enable(ts_dev->clk); - - prsc = clk_get_rate(ts_dev->clk); - dev_info(&pdev->dev, "Master clock is set at: %d Hz\n", prsc); - - if (!pdata->adc_clock) - pdata->adc_clock = ADC_DEFAULT_CLOCK; - - prsc = (prsc / (2 * pdata->adc_clock)) - 1; - - /* saturate if this value is too high */ - if (cpu_is_at91sam9rl()) { - if (prsc > PRESCALER_VAL(ATMEL_TSADCC_PRESCAL)) - prsc = PRESCALER_VAL(ATMEL_TSADCC_PRESCAL); - } else { - if (prsc > PRESCALER_VAL(ATMEL_TSADCC_EPRESCAL)) - prsc = PRESCALER_VAL(ATMEL_TSADCC_EPRESCAL); - } - - dev_info(&pdev->dev, "Prescaler is set at: %d\n", prsc); - - reg = ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE | - ((0x00 << 5) & ATMEL_TSADCC_SLEEP) | /* Normal Mode */ - ((0x01 << 6) & ATMEL_TSADCC_PENDET) | /* Enable Pen Detect */ - (prsc << 8) | - ((0x26 << 16) & ATMEL_TSADCC_STARTUP) | - ((pdata->pendet_debounce << 28) & ATMEL_TSADCC_PENDBC); - - atmel_tsadcc_write(ATMEL_TSADCC_CR, ATMEL_TSADCC_SWRST); - atmel_tsadcc_write(ATMEL_TSADCC_MR, reg); - atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE); - atmel_tsadcc_write(ATMEL_TSADCC_TSR, - (pdata->ts_sample_hold_time << 24) & ATMEL_TSADCC_TSSHTIM); - - atmel_tsadcc_read(ATMEL_TSADCC_SR); - atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT); - - /* All went ok, so register to the input system */ - err = input_register_device(input_dev); - if (err) - goto err_fail; - - return 0; - -err_fail: - clk_disable(ts_dev->clk); - clk_put(ts_dev->clk); -err_free_irq: - free_irq(ts_dev->irq, ts_dev); -err_unmap_regs: - iounmap(tsc_base); -err_release_mem: - release_mem_region(res->start, resource_size(res)); -err_free_dev: - input_free_device(input_dev); -err_free_mem: - kfree(ts_dev); - return err; -} - -static int atmel_tsadcc_remove(struct platform_device *pdev) -{ - struct atmel_tsadcc *ts_dev = platform_get_drvdata(pdev); - struct resource *res; - - free_irq(ts_dev->irq, ts_dev); - - input_unregister_device(ts_dev->input); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - iounmap(tsc_base); - release_mem_region(res->start, resource_size(res)); - - clk_disable(ts_dev->clk); - clk_put(ts_dev->clk); - - kfree(ts_dev); - - return 0; -} - -static struct platform_driver atmel_tsadcc_driver = { - .probe = atmel_tsadcc_probe, - .remove = atmel_tsadcc_remove, - .driver = { - .name = "atmel_tsadcc", - }, -}; -module_platform_driver(atmel_tsadcc_driver); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Atmel TouchScreen Driver"); -MODULE_AUTHOR("Dan Liang <dan.liang@atmel.com>"); - diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h index a6911ebbd02a..de4268d4987a 100644 --- a/include/linux/clk/at91_pmc.h +++ b/include/linux/clk/at91_pmc.h @@ -155,6 +155,7 @@ extern void __iomem *at91_pmc_base; #define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ #define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ #define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9] */ +#define AT91_PMC_OSCSEL (1 << 7) /* Slow Oscillator Selection [some SAM9] */ #define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ #define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ #define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ diff --git a/include/linux/platform_data/at91_adc.h b/include/linux/platform_data/at91_adc.h index b3ca1e94e0c8..7819fc787731 100644 --- a/include/linux/platform_data/at91_adc.h +++ b/include/linux/platform_data/at91_adc.h @@ -7,23 +7,10 @@ #ifndef _AT91_ADC_H_ #define _AT91_ADC_H_ -/** - * struct at91_adc_reg_desc - Various informations relative to registers - * @channel_base: Base offset for the channel data registers - * @drdy_mask: Mask of the DRDY field in the relevant registers - (Interruptions registers mostly) - * @status_register: Offset of the Interrupt Status Register - * @trigger_register: Offset of the Trigger setup register - * @mr_prescal_mask: Mask of the PRESCAL field in the adc MR register - * @mr_startup_mask: Mask of the STARTUP field in the adc MR register - */ -struct at91_adc_reg_desc { - u8 channel_base; - u32 drdy_mask; - u8 status_register; - u8 trigger_register; - u32 mr_prescal_mask; - u32 mr_startup_mask; +enum atmel_adc_ts_type { + ATMEL_ADC_TOUCHSCREEN_NONE = 0, + ATMEL_ADC_TOUCHSCREEN_4WIRE = 4, + ATMEL_ADC_TOUCHSCREEN_5WIRE = 5, }; /** @@ -42,23 +29,21 @@ struct at91_adc_trigger { /** * struct at91_adc_data - platform data for ADC driver * @channels_used: channels in use on the board as a bitmask - * @num_channels: global number of channels available on the board - * @registers: Registers definition on the board * @startup_time: startup time of the ADC in microseconds * @trigger_list: Triggers available in the ADC * @trigger_number: Number of triggers available in the ADC * @use_external_triggers: does the board has external triggers availables * @vref: Reference voltage for the ADC in millivolts + * @touchscreen_type: If a touchscreen is connected, its type (4 or 5 wires) */ struct at91_adc_data { unsigned long channels_used; - u8 num_channels; - struct at91_adc_reg_desc *registers; u8 startup_time; struct at91_adc_trigger *trigger_list; u8 trigger_number; bool use_external_triggers; u16 vref; + enum atmel_adc_ts_type touchscreen_type; }; extern void __init at91_add_device_adc(struct at91_adc_data *data); diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index e26b0c14edea..1466443797d7 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -87,13 +87,6 @@ struct atmel_uart_data { int rts_gpio; /* optional RTS GPIO */ }; - /* Touchscreen Controller */ -struct at91_tsadcc_data { - unsigned int adc_clock; - u8 pendet_debounce; - u8 ts_sample_hold_time; -}; - /* CAN */ struct at91_can_data { void (*transceiver_switch)(int on); diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c index 174bd546c08b..bb1149126c54 100644 --- a/sound/soc/atmel/sam9g20_wm8731.c +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -48,7 +48,6 @@ #include <asm/mach-types.h> #include <mach/hardware.h> -#include <mach/gpio.h> #include "../codecs/wm8731.h" #include "atmel-pcm.h" |