summaryrefslogtreecommitdiff
path: root/arch/arm/boot
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot')
-rw-r--r--arch/arm/boot/dts/Makefile2
-rw-r--r--arch/arm/boot/dts/am335x-bone-common.dtsi19
-rw-r--r--arch/arm/boot/dts/am335x-boneblack.dts4
-rw-r--r--arch/arm/boot/dts/am335x-evmsk.dts2
-rw-r--r--arch/arm/boot/dts/am35xx-clocks.dtsi14
-rw-r--r--arch/arm/boot/dts/armada-375.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-38x.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-39x.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-xp-linksys-mamba.dts5
-rw-r--r--arch/arm/boot/dts/dm816x.dtsi4
-rw-r--r--arch/arm/boot/dts/dove-cubox.dts1
-rw-r--r--arch/arm/boot/dts/exynos4412-trats2.dts2
-rw-r--r--arch/arm/boot/dts/exynos5420-peach-pit.dts1
-rw-r--r--arch/arm/boot/dts/exynos5800-peach-pi.dts1
-rw-r--r--arch/arm/boot/dts/imx27.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3-devkit8000.dts2
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts4
-rw-r--r--arch/arm/boot/dts/tegra124.dtsi8
-rw-r--r--arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts1
-rw-r--r--arch/arm/boot/dts/vexpress-v2p-ca9.dts11
-rw-r--r--arch/arm/boot/dts/zynq-7000.dtsi4
21 files changed, 61 insertions, 32 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 86217db2937a..992736b5229b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -223,7 +223,7 @@ dtb-$(CONFIG_SOC_IMX25) += \
imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \
imx25-karo-tx25.dtb \
imx25-pdk.dtb
-dtb-$(CONFIG_SOC_IMX31) += \
+dtb-$(CONFIG_SOC_IMX27) += \
imx27-apf27.dtb \
imx27-apf27dev.dtb \
imx27-eukrea-mbimxsd27-baseboard.dtb \
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index c3255e0c90aa..dbb3f4d2bf84 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -223,6 +223,25 @@
/include/ "tps65217.dtsi"
&tps {
+ /*
+ * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+ * mode") at poweroff. Most BeagleBone versions do not support RTC-only
+ * mode and risk hardware damage if this mode is entered.
+ *
+ * For details, see linux-omap mailing list May 2015 thread
+ * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+ * In particular, messages:
+ * http://www.spinics.net/lists/linux-omap/msg118585.html
+ * http://www.spinics.net/lists/linux-omap/msg118615.html
+ *
+ * You can override this later with
+ * &tps { /delete-property/ ti,pmic-shutdown-controller; }
+ * if you want to use RTC-only mode and made sure you are not affected
+ * by the hardware problems. (Tip: double-check by performing a current
+ * measurement after shutdown: it should be less than 1 mA.)
+ */
+ ti,pmic-shutdown-controller;
+
regulators {
dcdc1_reg: regulator@0 {
regulator-name = "vdds_dpr";
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index 5c42d259fa68..901739fcb85a 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -80,7 +80,3 @@
status = "okay";
};
};
-
-&rtc {
- system-power-controller;
-};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 87fc7a35e802..156d05efcb70 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -654,7 +654,7 @@
wlcore: wlcore@2 {
compatible = "ti,wl1271";
reg = <2>;
- interrupt-parent = <&gpio1>;
+ interrupt-parent = <&gpio0>;
interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */
ref-clock-frequency = <38400000>;
};
diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi
index 518b8fde88b0..18cc826e9db5 100644
--- a/arch/arm/boot/dts/am35xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am35xx-clocks.dtsi
@@ -12,7 +12,7 @@
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&ipss_ick>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <1>;
};
@@ -20,7 +20,7 @@
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&rmii_ck>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <9>;
};
@@ -28,7 +28,7 @@
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&ipss_ick>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <2>;
};
@@ -36,7 +36,7 @@
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&pclk_ck>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <10>;
};
@@ -44,7 +44,7 @@
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&ipss_ick>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <0>;
};
@@ -52,7 +52,7 @@
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&sys_ck>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <8>;
};
@@ -60,7 +60,7 @@
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&sys_ck>;
- reg = <0x059c>;
+ reg = <0x032c>;
ti,bit-shift = <3>;
};
};
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index c675257f2377..f076ff856d8b 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -69,7 +69,7 @@
mainpll: mainpll {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <2000000000>;
+ clock-frequency = <1000000000>;
};
/* 25 MHz reference crystal */
refclk: oscillator {
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index ed2dd8ba4080..218a2acd36e5 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -585,7 +585,7 @@
mainpll: mainpll {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <2000000000>;
+ clock-frequency = <1000000000>;
};
/* 25 MHz reference crystal */
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index 0e85fc15ceda..ecd1318109ba 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -502,7 +502,7 @@
mainpll: mainpll {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <2000000000>;
+ clock-frequency = <1000000000>;
};
};
};
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index a2cf2154dcdb..fdd187c55aa5 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -95,6 +95,11 @@
internal-regs {
+ rtc@10300 {
+ /* No crystal connected to the internal RTC */
+ status = "disabled";
+ };
+
/* J10: VCC, NC, RX, NC, TX, GND */
serial@12000 {
status = "okay";
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index de8427be830a..289806adb343 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -382,7 +382,7 @@
ti,hwmods = "usb_otg_hs";
usb0: usb@47401000 {
- compatible = "ti,musb-am33xx";
+ compatible = "ti,musb-dm816";
reg = <0x47401400 0x400
0x47401000 0x200>;
reg-names = "mc", "control";
@@ -422,7 +422,7 @@
};
usb1: usb@47401800 {
- compatible = "ti,musb-am33xx";
+ compatible = "ti,musb-dm816";
reg = <0x47401c00 0x400
0x47401800 0x200>;
reg-names = "mc", "control";
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index aae7efc09b0b..e6fa251e17b9 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -87,6 +87,7 @@
/* connect xtal input to 25MHz reference */
clocks = <&ref25>;
+ clock-names = "xtal";
/* connect xtal input as source of pll0 and pll1 */
silabs,pll-source = <0 0>, <1 0>;
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 173ffa479ad3..792394dd0f2a 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -736,7 +736,7 @@
display-timings {
timing-0 {
- clock-frequency = <0>;
+ clock-frequency = <57153600>;
hactive = <720>;
vactive = <1280>;
hfront-porch = <5>;
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 0788d08fb43e..146e71118a72 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -711,6 +711,7 @@
num-slots = <1>;
broken-cd;
cap-sdio-irq;
+ keep-power-in-suspend;
card-detect-delay = <200>;
clock-frequency = <400000000>;
samsung,dw-mshc-ciu-div = <1>;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 412f41d62686..02eb8b15374f 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -674,6 +674,7 @@
num-slots = <1>;
broken-cd;
cap-sdio-irq;
+ keep-power-in-suspend;
card-detect-delay = <200>;
clock-frequency = <400000000>;
samsung,dw-mshc-ciu-div = <1>;
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 6951b66d1ab7..bc215e4b75fd 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -533,7 +533,7 @@
fec: ethernet@1002b000 {
compatible = "fsl,imx27-fec";
- reg = <0x1002b000 0x4000>;
+ reg = <0x1002b000 0x1000>;
interrupts = <50>;
clocks = <&clks IMX27_CLK_FEC_IPG_GATE>,
<&clks IMX27_CLK_FEC_AHB_GATE>;
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index 134d3f27a8ec..921de6605f07 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -110,6 +110,8 @@
nand@0,0 {
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ ti,nand-ecc-opt = "sw";
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 5c16145920ea..5f5e0f3d5b64 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -832,8 +832,8 @@
touchscreen-fuzz-x = <4>;
touchscreen-fuzz-y = <7>;
touchscreen-fuzz-pressure = <2>;
- touchscreen-max-x = <4096>;
- touchscreen-max-y = <4096>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
touchscreen-max-pressure = <2048>;
ti,x-plate-ohms = <280>;
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index cf01c818b8ea..13cc7ca5e031 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -826,7 +826,7 @@
<&tegra_car TEGRA124_CLK_PLL_U>,
<&tegra_car TEGRA124_CLK_USBD>;
clock-names = "reg", "pll_u", "utmi-pads";
- resets = <&tegra_car 59>, <&tegra_car 22>;
+ resets = <&tegra_car 22>, <&tegra_car 22>;
reset-names = "usb", "utmi-pads";
nvidia,hssync-start-delay = <0>;
nvidia,idle-wait-delay = <17>;
@@ -838,6 +838,7 @@
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
+ nvidia,has-utmi-pad-registers;
status = "disabled";
};
@@ -862,7 +863,7 @@
<&tegra_car TEGRA124_CLK_PLL_U>,
<&tegra_car TEGRA124_CLK_USBD>;
clock-names = "reg", "pll_u", "utmi-pads";
- resets = <&tegra_car 22>, <&tegra_car 22>;
+ resets = <&tegra_car 58>, <&tegra_car 22>;
reset-names = "usb", "utmi-pads";
nvidia,hssync-start-delay = <0>;
nvidia,idle-wait-delay = <17>;
@@ -874,7 +875,6 @@
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
- nvidia,has-utmi-pad-registers;
status = "disabled";
};
@@ -899,7 +899,7 @@
<&tegra_car TEGRA124_CLK_PLL_U>,
<&tegra_car TEGRA124_CLK_USBD>;
clock-names = "reg", "pll_u", "utmi-pads";
- resets = <&tegra_car 58>, <&tegra_car 22>;
+ resets = <&tegra_car 59>, <&tegra_car 22>;
reset-names = "usb", "utmi-pads";
nvidia,hssync-start-delay = <0>;
nvidia,idle-wait-delay = <17>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 7a2aeacd62c0..107395c32d82 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -191,6 +191,7 @@
compatible = "arm,cortex-a15-pmu";
interrupts = <0 68 4>,
<0 69 4>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
};
oscclk6a: oscclk6a {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index 23662b5a5e9d..d949facba376 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -33,28 +33,28 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ A9_0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
next-level-cache = <&L2>;
};
- cpu@1 {
+ A9_1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
next-level-cache = <&L2>;
};
- cpu@2 {
+ A9_2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
next-level-cache = <&L2>;
};
- cpu@3 {
+ A9_3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
@@ -170,6 +170,7 @@
compatible = "arm,pl310-cache";
reg = <0x1e00a000 0x1000>;
interrupts = <0 43 4>;
+ cache-unified;
cache-level = <2>;
arm,data-latency = <1 1 1>;
arm,tag-latency = <1 1 1>;
@@ -181,6 +182,8 @@
<0 61 4>,
<0 62 4>,
<0 63 4>;
+ interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>;
+
};
dcc {
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index a5cd2eda3edf..9ea54b3dba09 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -193,7 +193,7 @@
};
gem0: ethernet@e000b000 {
- compatible = "cdns,gem";
+ compatible = "cdns,zynq-gem";
reg = <0xe000b000 0x1000>;
status = "disabled";
interrupts = <0 22 4>;
@@ -204,7 +204,7 @@
};
gem1: ethernet@e000c000 {
- compatible = "cdns,gem";
+ compatible = "cdns,zynq-gem";
reg = <0xe000c000 0x1000>;
status = "disabled";
interrupts = <0 45 4>;
View Lorry Controller Status