1 files changed, 111 insertions, 101 deletions

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 89c7c8569e5e..25ddf02598d2 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -211,11 +211,7 @@ static inline int lapic_get_version(void)
  */
 static inline int lapic_is_integrated(void)
 {
-#ifdef CONFIG_X86_64
-	return 1;
-#else
 	return APIC_INTEGRATED(lapic_get_version());
-#endif
 }
 
 /*
@@ -298,14 +294,11 @@ int get_physical_broadcast(void)
  */
 int lapic_get_maxlvt(void)
 {
-	unsigned int v;
-
-	v = apic_read(APIC_LVR);
 	/*
 	 * - we always have APIC integrated on 64bit mode
 	 * - 82489DXs do not report # of LVT entries
 	 */
-	return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2;
+	return lapic_is_integrated() ? GET_APIC_MAXLVT(apic_read(APIC_LVR)) : 2;
 }
 
 /*
@@ -1229,6 +1222,70 @@ void __init sync_Arb_IDs(void)
 			APIC_INT_LEVELTRIG | APIC_DM_INIT);
 }
 
+enum apic_intr_mode_id apic_intr_mode;
+
+static int __init apic_intr_mode_select(void)
+{
+	/* Check kernel option */
+	if (disable_apic) {
+		pr_info("APIC disabled via kernel command line\n");
+		return APIC_PIC;
+	}
+
+	/* Check BIOS */
+#ifdef CONFIG_X86_64
+	/* On 64-bit, the APIC must be integrated, Check local APIC only */
+	if (!boot_cpu_has(X86_FEATURE_APIC)) {
+		disable_apic = 1;
+		pr_info("APIC disabled by BIOS\n");
+		return APIC_PIC;
+	}
+#else
+	/* On 32-bit, the APIC may be integrated APIC or 82489DX */
+
+	/* Neither 82489DX nor integrated APIC ? */
+	if (!boot_cpu_has(X86_FEATURE_APIC) && !smp_found_config) {
+		disable_apic = 1;
+		return APIC_PIC;
+	}
+
+	/* If the BIOS pretends there is an integrated APIC ? */
+	if (!boot_cpu_has(X86_FEATURE_APIC) &&
+		APIC_INTEGRATED(boot_cpu_apic_version)) {
+		disable_apic = 1;
+		pr_err(FW_BUG "Local APIC %d not detected, force emulation\n",
+				       boot_cpu_physical_apicid);
+		return APIC_PIC;
+	}
+#endif
+
+	/* Check MP table or ACPI MADT configuration */
+	if (!smp_found_config) {
+		disable_ioapic_support();
+		if (!acpi_lapic) {
+			pr_info("APIC: ACPI MADT or MP tables are not detected\n");
+			return APIC_VIRTUAL_WIRE_NO_CONFIG;
+		}
+		return APIC_VIRTUAL_WIRE;
+	}
+
+#ifdef CONFIG_SMP
+	/* If SMP should be disabled, then really disable it! */
+	if (!setup_max_cpus) {
+		pr_info("APIC: SMP mode deactivated\n");
+		return APIC_SYMMETRIC_IO_NO_ROUTING;
+	}
+
+	if (read_apic_id() != boot_cpu_physical_apicid) {
+		panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
+		     read_apic_id(), boot_cpu_physical_apicid);
+		/* Or can we switch back to PIC here? */
+	}
+#endif
+
+	return APIC_SYMMETRIC_IO;
+}
+
 /*
  * An initial setup of the virtual wire mode.
  */
@@ -1278,6 +1335,38 @@ void __init init_bsp_APIC(void)
 	apic_write(APIC_LVT1, value);
 }
 
+/* Init the interrupt delivery mode for the BSP */
+void __init apic_intr_mode_init(void)
+{
+	bool upmode = IS_ENABLED(CONFIG_UP_LATE_INIT);
+
+	apic_intr_mode = apic_intr_mode_select();
+
+	switch (apic_intr_mode) {
+	case APIC_PIC:
+		pr_info("APIC: Keep in PIC mode(8259)\n");
+		return;
+	case APIC_VIRTUAL_WIRE:
+		pr_info("APIC: Switch to virtual wire mode setup\n");
+		default_setup_apic_routing();
+		break;
+	case APIC_VIRTUAL_WIRE_NO_CONFIG:
+		pr_info("APIC: Switch to virtual wire mode setup with no configuration\n");
+		upmode = true;
+		default_setup_apic_routing();
+		break;
+	case APIC_SYMMETRIC_IO:
+		pr_info("APIC: Switch to symmetric I/O mode setup\n");
+		default_setup_apic_routing();
+		break;
+	case APIC_SYMMETRIC_IO_NO_ROUTING:
+		pr_info("APIC: Switch to symmetric I/O mode setup in no SMP routine\n");
+		break;
+	}
+
+	apic_bsp_setup(upmode);
+}
+
 static void lapic_setup_esr(void)
 {
 	unsigned int oldvalue, value, maxlvt;
@@ -1473,7 +1562,7 @@ void setup_local_APIC(void)
 	/*
 	 * Set up LVT0, LVT1:
 	 *
-	 * set up through-local-APIC on the BP's LINT0. This is not
+	 * set up through-local-APIC on the boot CPU's LINT0. This is not
 	 * strictly necessary in pure symmetric-IO mode, but sometimes
 	 * we delegate interrupts to the 8259A.
 	 */
@@ -1499,7 +1588,9 @@ void setup_local_APIC(void)
 		value = APIC_DM_NMI;
 	else
 		value = APIC_DM_NMI | APIC_LVT_MASKED;
-	if (!lapic_is_integrated())		/* 82489DX */
+
+	/* Is 82489DX ? */
+	if (!lapic_is_integrated())
 		value |= APIC_LVT_LEVEL_TRIGGER;
 	apic_write(APIC_LVT1, value);
 
@@ -1885,8 +1976,8 @@ void __init init_apic_mappings(void)
 		 * yeah -- we lie about apic_version
 		 * in case if apic was disabled via boot option
 		 * but it's not a problem for SMP compiled kernel
-		 * since smp_sanity_check is prepared for such a case
-		 * and disable smp mode
+		 * since apic_intr_mode_select is prepared for such
+		 * a case and disable smp mode
 		 */
 		boot_cpu_apic_version = GET_APIC_VERSION(apic_read(APIC_LVR));
 	}
@@ -2242,44 +2333,6 @@ int hard_smp_processor_id(void)
 	return read_apic_id();
 }
 
-void default_init_apic_ldr(void)
-{
-	unsigned long val;
-
-	apic_write(APIC_DFR, APIC_DFR_VALUE);
-	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
-	apic_write(APIC_LDR, val);
-}
-
-int default_cpu_mask_to_apicid(const struct cpumask *mask,
-			       struct irq_data *irqdata,
-			       unsigned int *apicid)
-{
-	unsigned int cpu = cpumask_first(mask);
-
-	if (cpu >= nr_cpu_ids)
-		return -EINVAL;
-	*apicid = per_cpu(x86_cpu_to_apicid, cpu);
-	irq_data_update_effective_affinity(irqdata, cpumask_of(cpu));
-	return 0;
-}
-
-int flat_cpu_mask_to_apicid(const struct cpumask *mask,
-			    struct irq_data *irqdata,
-			    unsigned int *apicid)
-
-{
-	struct cpumask *effmsk = irq_data_get_effective_affinity_mask(irqdata);
-	unsigned long cpu_mask = cpumask_bits(mask)[0] & APIC_ALL_CPUS;
-
-	if (!cpu_mask)
-		return -EINVAL;
-	*apicid = (unsigned int)cpu_mask;
-	cpumask_bits(effmsk)[0] = cpu_mask;
-	return 0;
-}
-
 /*
  * Override the generic EOI implementation with an optimized version.
  * Only called during early boot when only one CPU is active and with
@@ -2322,72 +2375,27 @@ static void __init apic_bsp_up_setup(void)
  * Returns:
  * apic_id of BSP APIC
  */
-int __init apic_bsp_setup(bool upmode)
+void __init apic_bsp_setup(bool upmode)
 {
-	int id;
-
 	connect_bsp_APIC();
 	if (upmode)
 		apic_bsp_up_setup();
 	setup_local_APIC();
 
-	if (x2apic_mode)
-		id = apic_read(APIC_LDR);
-	else
-		id = GET_APIC_LOGICAL_ID(apic_read(APIC_LDR));
-
 	enable_IO_APIC();
 	end_local_APIC_setup();
 	irq_remap_enable_fault_handling();
 	setup_IO_APIC();
-	/* Setup local timer */
-	x86_init.timers.setup_percpu_clockev();
-	return id;
-}
-
-/*
- * This initializes the IO-APIC and APIC hardware if this is
- * a UP kernel.
- */
-int __init APIC_init_uniprocessor(void)
-{
-	if (disable_apic) {
-		pr_info("Apic disabled\n");
-		return -1;
-	}
-#ifdef CONFIG_X86_64
-	if (!boot_cpu_has(X86_FEATURE_APIC)) {
-		disable_apic = 1;
-		pr_info("Apic disabled by BIOS\n");
-		return -1;
-	}
-#else
-	if (!smp_found_config && !boot_cpu_has(X86_FEATURE_APIC))
-		return -1;
-
-	/*
-	 * Complain if the BIOS pretends there is one.
-	 */
-	if (!boot_cpu_has(X86_FEATURE_APIC) &&
-	    APIC_INTEGRATED(boot_cpu_apic_version)) {
-		pr_err("BIOS bug, local APIC 0x%x not detected!...\n",
-			boot_cpu_physical_apicid);
-		return -1;
-	}
-#endif
-
-	if (!smp_found_config)
-		disable_ioapic_support();
-
-	default_setup_apic_routing();
-	apic_bsp_setup(true);
-	return 0;
 }
 
 #ifdef CONFIG_UP_LATE_INIT
 void __init up_late_init(void)
 {
-	APIC_init_uniprocessor();
+	if (apic_intr_mode == APIC_PIC)
+		return;
+
+	/* Setup local timer */
+	x86_init.timers.setup_percpu_clockev();
 }
 #endif
 
@@ -2667,11 +2675,13 @@ static int __init apic_set_verbosity(char *arg)
 		apic_verbosity = APIC_DEBUG;
 	else if (strcmp("verbose", arg) == 0)
 		apic_verbosity = APIC_VERBOSE;
+#ifdef CONFIG_X86_64
 	else {
 		pr_warning("APIC Verbosity level %s not recognised"
 			" use apic=verbose or apic=debug\n", arg);
 		return -EINVAL;
 	}
+#endif
 
 	return 0;
 }