diff options
Diffstat (limited to 'drivers/scsi/Kconfig')
| -rw-r--r-- | drivers/scsi/Kconfig | 174 |
1 files changed, 33 insertions, 141 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 44728ae3fe77..c4dfcc91ddda 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -27,6 +27,11 @@ config SCSI However, do not compile this as a module if your root file system (the one containing the directory /) is located on a SCSI device. +config SCSI_NETLINK + bool + default n + select NET + config SCSI_PROC_FS bool "legacy /proc/scsi/ support" depends on SCSI && PROC_FS @@ -209,7 +214,7 @@ config SCSI_LOGGING there should be no noticeable performance impact as long as you have logging turned off. -menu "SCSI Transport Attributes" +menu "SCSI Transports" depends on SCSI config SCSI_SPI_ATTRS @@ -222,6 +227,7 @@ config SCSI_SPI_ATTRS config SCSI_FC_ATTRS tristate "FiberChannel Transport Attributes" depends on SCSI + select SCSI_NETLINK help If you wish to export transport-specific information about each attached FiberChannel device to sysfs, say Y. @@ -242,6 +248,8 @@ config SCSI_SAS_ATTRS If you wish to export transport-specific information about each attached SAS device to sysfs, say Y. +source "drivers/scsi/libsas/Kconfig" + endmenu menu "SCSI low-level drivers" @@ -431,6 +439,7 @@ config SCSI_AIC7XXX_OLD module will be called aic7xxx_old. source "drivers/scsi/aic7xxx/Kconfig.aic79xx" +source "drivers/scsi/aic94xx/Kconfig" # All the I2O code and drivers do not seem to be 64bit safe. config SCSI_DPT_I2O @@ -469,68 +478,21 @@ config SCSI_IN2000 To compile this driver as a module, choose M here: the module will be called in2000. -source "drivers/scsi/megaraid/Kconfig.megaraid" - -config SCSI_SATA - tristate "Serial ATA (SATA) support" - depends on SCSI - help - This driver family supports Serial ATA host controllers - and devices. - - If unsure, say N. - -config SCSI_SATA_AHCI - tristate "AHCI SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for AHCI Serial ATA. - - If unsure, say N. - -config SCSI_SATA_SVW - tristate "ServerWorks Frodo / Apple K2 SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for Broadcom/Serverworks/Apple K2 - SATA support. - - If unsure, say N. - -config SCSI_ATA_PIIX - tristate "Intel PIIX/ICH SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for ICH5 Serial ATA. - If PATA support was enabled previously, this enables - support for select Intel PIIX/ICH PATA host controllers. - - If unsure, say N. - -config SCSI_SATA_MV - tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for the Marvell Serial ATA family. - Currently supports 88SX[56]0[48][01] chips. - - If unsure, say N. - -config SCSI_SATA_NV - tristate "NVIDIA SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL +config SCSI_ARCMSR + tristate "ARECA ARC11X0[PCI-X]/ARC12X0[PCI-EXPRESS] SATA-RAID support" + depends on PCI && SCSI help - This option enables support for NVIDIA Serial ATA. + This driver supports all of ARECA's SATA RAID controller cards. + This is an ARECA-maintained driver by Erich Chen. + If you have any problems, please mail to: < erich@areca.com.tw > + Areca supports Linux RAID config tools. - If unsure, say N. + < http://www.areca.com.tw > -config SCSI_PDC_ADMA - tristate "Pacific Digital ADMA support" - depends on SCSI_SATA && PCI - help - This option enables support for Pacific Digital ADMA controllers + To compile this driver as a module, choose M here: the + module will be called arcmsr (modprobe arcmsr). - If unsure, say N. +source "drivers/scsi/megaraid/Kconfig.megaraid" config SCSI_HPTIOP tristate "HighPoint RocketRAID 3xxx Controller support" @@ -542,83 +504,6 @@ config SCSI_HPTIOP To compile this driver as a module, choose M here; the module will be called hptiop. If unsure, say N. -config SCSI_SATA_QSTOR - tristate "Pacific Digital SATA QStor support" - depends on SCSI_SATA && PCI - help - This option enables support for Pacific Digital Serial ATA QStor. - - If unsure, say N. - -config SCSI_SATA_PROMISE - tristate "Promise SATA TX2/TX4 support" - depends on SCSI_SATA && PCI - help - This option enables support for Promise Serial ATA TX2/TX4. - - If unsure, say N. - -config SCSI_SATA_SX4 - tristate "Promise SATA SX4 support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for Promise Serial ATA SX4. - - If unsure, say N. - -config SCSI_SATA_SIL - tristate "Silicon Image SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for Silicon Image Serial ATA. - - If unsure, say N. - -config SCSI_SATA_SIL24 - tristate "Silicon Image 3124/3132 SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for Silicon Image 3124/3132 Serial ATA. - - If unsure, say N. - -config SCSI_SATA_SIS - tristate "SiS 964/180 SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for SiS Serial ATA 964/180. - - If unsure, say N. - -config SCSI_SATA_ULI - tristate "ULi Electronics SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for ULi Electronics SATA. - - If unsure, say N. - -config SCSI_SATA_VIA - tristate "VIA SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for VIA Serial ATA. - - If unsure, say N. - -config SCSI_SATA_VITESSE - tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. - - If unsure, say N. - -config SCSI_SATA_INTEL_COMBINED - bool - depends on IDE=y && !BLK_DEV_IDE_SATA && (SCSI_SATA_AHCI || SCSI_ATA_PIIX) - default y - config SCSI_BUSLOGIC tristate "BusLogic SCSI support" depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API @@ -1053,6 +938,13 @@ config 53C700_LE_ON_BE depends on SCSI_LASI700 default y +config SCSI_STEX + tristate "Promise SuperTrak EX Series support" + depends on PCI && SCSI + ---help--- + This driver supports Promise SuperTrak EX8350/8300/16350/16300 + Storage controllers. + config SCSI_SYM53C8XX_2 tristate "SYM53C8XX Version 2 SCSI support" depends on PCI && SCSI @@ -1169,7 +1061,7 @@ config SCSI_NCR_Q720 you do not have this SCSI card, so say N. config SCSI_NCR53C8XX_DEFAULT_TAGS - int " default tagged command queue depth" + int "default tagged command queue depth" depends on SCSI_ZALON || SCSI_NCR_Q720 default "8" ---help--- @@ -1195,7 +1087,7 @@ config SCSI_NCR53C8XX_DEFAULT_TAGS There is no safe option other than using good SCSI devices. config SCSI_NCR53C8XX_MAX_TAGS - int " maximum number of queued commands" + int "maximum number of queued commands" depends on SCSI_ZALON || SCSI_NCR_Q720 default "32" ---help--- @@ -1212,7 +1104,7 @@ config SCSI_NCR53C8XX_MAX_TAGS There is no safe option and the default answer is recommended. config SCSI_NCR53C8XX_SYNC - int " synchronous transfers frequency in MHz" + int "synchronous transfers frequency in MHz" depends on SCSI_ZALON || SCSI_NCR_Q720 default "20" ---help--- @@ -1246,7 +1138,7 @@ config SCSI_NCR53C8XX_SYNC terminations and SCSI conformant devices. config SCSI_NCR53C8XX_PROFILE - bool " enable profiling" + bool "enable profiling" depends on SCSI_ZALON || SCSI_NCR_Q720 help This option allows you to enable profiling information gathering. @@ -1257,7 +1149,7 @@ config SCSI_NCR53C8XX_PROFILE The normal answer therefore is N. config SCSI_NCR53C8XX_NO_DISCONNECT - bool " not allow targets to disconnect" + bool "not allow targets to disconnect" depends on (SCSI_ZALON || SCSI_NCR_Q720) && SCSI_NCR53C8XX_DEFAULT_TAGS=0 help This option is only provided for safety if you suspect some SCSI |