diff options
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/Kconfig | 57 | ||||
| -rw-r--r-- | drivers/serial/icom.c | 2 | ||||
| -rw-r--r-- | drivers/serial/sh-sci.c | 22 | ||||
| -rw-r--r-- | drivers/serial/sh-sci.h | 19 |
4 files changed, 70 insertions, 30 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index fc12d5df10e2..2978c09860ee 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -151,32 +151,6 @@ config SERIAL_8250_MANY_PORTS say N here to save some memory. You can also say Y if you have an "intelligent" multiport card such as Cyclades, Digiboards, etc. -config SERIAL_8250_SHARE_IRQ - bool "Support for sharing serial interrupts" - depends on SERIAL_8250_EXTENDED - help - Some serial boards have hardware support which allows multiple dumb - serial ports on the same board to share a single IRQ. To enable - support for this in the serial driver, say Y here. - -config SERIAL_8250_DETECT_IRQ - bool "Autodetect IRQ on standard ports (unsafe)" - depends on SERIAL_8250_EXTENDED - help - Say Y here if you want the kernel to try to guess which IRQ - to use for your serial port. - - This is considered unsafe; it is far better to configure the IRQ in - a boot script using the setserial command. - - If unsure, say N. - -config SERIAL_8250_RSA - bool "Support RSA serial ports" - depends on SERIAL_8250_EXTENDED - help - ::: To be written ::: - # # Multi-port serial cards # @@ -199,7 +173,6 @@ config SERIAL_8250_ACCENT To compile this driver as a module, choose M here: the module will be called 8250_accent. - config SERIAL_8250_BOCA tristate "Support Boca cards" depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS @@ -230,6 +203,32 @@ config SERIAL_8250_HUB6 To compile this driver as a module, choose M here: the module will be called 8250_hub6. +config SERIAL_8250_SHARE_IRQ + bool "Support for sharing serial interrupts" + depends on SERIAL_8250_EXTENDED + help + Some serial boards have hardware support which allows multiple dumb + serial ports on the same board to share a single IRQ. To enable + support for this in the serial driver, say Y here. + +config SERIAL_8250_DETECT_IRQ + bool "Autodetect IRQ on standard ports (unsafe)" + depends on SERIAL_8250_EXTENDED + help + Say Y here if you want the kernel to try to guess which IRQ + to use for your serial port. + + This is considered unsafe; it is far better to configure the IRQ in + a boot script using the setserial command. + + If unsure, say N. + +config SERIAL_8250_RSA + bool "Support RSA serial ports" + depends on SERIAL_8250_EXTENDED + help + ::: To be written ::: + config SERIAL_8250_MCA tristate "Support 8250-type ports on MCA buses" depends on SERIAL_8250 != n && MCA @@ -664,7 +663,7 @@ config V850E_UART config V850E_UARTB bool - depends V850E_UART && V850E_ME2 + depends on V850E_UART && V850E_ME2 default y config V850E_UART_CONSOLE @@ -910,7 +909,7 @@ config SERIAL_M32R_PLDSIO config SERIAL_TXX9 bool "TMPTX39XX/49XX SIO support" - depends HAS_TXX9_SERIAL + depends on HAS_TXX9_SERIAL select SERIAL_CORE default y diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index 7d623003e65e..71e6a24d8c28 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -1510,7 +1510,7 @@ static int __devinit icom_probe(struct pci_dev *dev, } if ( (retval = pci_request_regions(dev, "icom"))) { - dev_err(&dev->dev, "pci_request_region FAILED\n"); + dev_err(&dev->dev, "pci_request_regions FAILED\n"); pci_disable_device(dev); return retval; } diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 9031b57f12dd..c53b69610a51 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -319,6 +319,28 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) sci_out(port, SCFCR, fcr_val); } +#elif defined(CONFIG_CPU_SUBTYPE_SH7722) +static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) +{ + unsigned int fcr_val = 0; + + if (cflag & CRTSCTS) { + fcr_val |= SCFCR_MCE; + + ctrl_outw(0x0000, PORT_PSCR); + } else { + unsigned short data; + + data = ctrl_inw(PORT_PSCR); + data &= 0x033f; + data |= 0x0400; + ctrl_outw(data, PORT_PSCR); + + ctrl_outw(ctrl_inw(SCSPTR0) & 0x17, SCSPTR0); + } + + sci_out(port, SCFCR, fcr_val); +} #else /* For SH7750 */ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index e4557cc4f74b..77f7d6351ab1 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -90,6 +90,13 @@ # define SCSPTR3 0xffe30010 /* 16 bit SCIF */ # define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */ # define SCIF_ONLY +#elif defined(CONFIG_CPU_SUBTYPE_SH7722) +# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */ +# define SCSPTR0 SCPDR0 +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +# define SCIF_ONLY +# define PORT_PSCR 0xA405011E #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) # define SCSPTR2 0xffe80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ @@ -495,6 +502,7 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfe620000) return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7300) static inline int sci_rxd_in(struct uart_port *port) @@ -521,6 +529,13 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } +#elif defined(CONFIG_CPU_SUBTYPE_SH7722) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xffe00000) + return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */ + return 1; +} #elif defined(CONFIG_CPU_SUBTYPE_ST40STB1) static inline int sci_rxd_in(struct uart_port *port) { @@ -550,6 +565,7 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xff925000) return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7780) static inline int sci_rxd_in(struct uart_port *port) @@ -558,6 +574,7 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe10000) return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7206) static inline int sci_rxd_in(struct uart_port *port) @@ -570,6 +587,7 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xfffe9800) return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7619) static inline int sci_rxd_in(struct uart_port *port) @@ -580,6 +598,7 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xf8420000) return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + return 1; } #endif |