diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/media/dvb/dvb-usb/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-usb/anysee.c | 43 |
2 files changed, 45 insertions, 0 deletions
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index e624ff3ef070..9931ec95d900 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -293,6 +293,8 @@ config DVB_USB_ANYSEE select DVB_ZL10353 if !DVB_FE_CUSTOMISE select DVB_TDA10023 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_TDA18212 if !MEDIA_TUNER_CUSTOMISE + select DVB_CX24116 if !DVB_FE_CUSTOMISE + select DVB_ISL6423 if !DVB_FE_CUSTOMISE help Say Y here to support the Anysee E30, Anysee E30 Plus or Anysee E30 C Plus DVB USB2.0 receiver. diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c index 0e94541ffcff..ebcc05b73c7f 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -37,6 +37,8 @@ #include "mt352_priv.h" #include "zl10353.h" #include "tda18212.h" +#include "cx24116.h" +#include "isl6423.h" /* debug */ static int dvb_usb_anysee_debug; @@ -300,6 +302,19 @@ static struct tda18212_config anysee_tda18212_config = { .if_dvbc = 5000, }; +static struct cx24116_config anysee_cx24116_config = { + .demod_address = (0xaa >> 1), + .mpg_clk_pos_pol = 0x00, + .i2c_wr_max = 48, +}; + +static struct isl6423_config anysee_isl6423_config = { + .current_max = SEC_CURRENT_800m, + .curlim = SEC_CURRENT_LIM_OFF, + .mod_extern = 1, + .addr = (0x10 >> 1), +}; + /* * New USB device strings: Mfr=1, Product=2, SerialNumber=0 * Manufacturer: AMT.CO.KR @@ -328,6 +343,13 @@ static struct tda18212_config anysee_tda18212_config = { * IOA=4f IOB=ff IOC=00 IOD=26 IOF=01 * IOD[0] TDA10023 1=enabled * + * E30 S2 Plus VID=04b4 PID=861f HW=11 FW=0.1 "anysee-S2(LP)" + * PCB: 507SI (rev2.1) + * parts: BS2N10WCC01(CX24116, CX24118), ISL6423, TDA8024 + * OEA=80 OEB=00 OEC=ff OED=ff OEF=fe + * IOA=4d IOB=ff IOC=00 IOD=26 IOF=01 + * IOD[0] CX24116 1=enabled + * * E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)" * PCB: 507FA (rev0.4) * parts: TDA10023, DTOS403IH102B TM, TDA8024 @@ -449,6 +471,19 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) &adap->dev->i2c_adap, 0x48); break; + case ANYSEE_HW_507SI: /* 11 */ + /* E30 S2 Plus */ + + /* enable DVB-S/S2 demod on IOD[0] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01); + if (ret) + goto error; + + /* attach demod */ + adap->fe = dvb_attach(cx24116_attach, &anysee_cx24116_config, + &adap->dev->i2c_adap); + + break; case ANYSEE_HW_507FA: /* 15 */ /* E30 Combo Plus */ /* E30 C Plus */ @@ -625,6 +660,14 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap) &adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A); break; + case ANYSEE_HW_507SI: /* 11 */ + /* E30 S2 Plus */ + + /* attach LNB controller */ + fe = dvb_attach(isl6423_attach, adap->fe, &adap->dev->i2c_adap, + &anysee_isl6423_config); + + break; case ANYSEE_HW_507FA: /* 15 */ /* E30 Combo Plus */ /* E30 C Plus */ |