summaryrefslogtreecommitdiff
path: root/drivers/clk
Commit message (Collapse)AuthorAgeFilesLines
* clk: ingenic: Fix doc of ingenic_cgu_div_infoPaul Cercueil2019-03-231-1/+1
| | | | | | | | | | | | | | | commit 7ca4c922aad2e3c46767a12f80d01c6b25337b59 upstream. The 'div' field does not represent a number of bits used to divide (understand: right-shift) the divider, but a number itself used to divide the divider. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: ingenic: Fix round_rate misbehaving with non-integer dividersPaul Cercueil2019-03-231-5/+5
| | | | | | | | | | | | | | | | | | | | | | | commit bc5d922c93491878c44c9216e9d227c7eeb81d7f upstream. Take a parent rate of 180 MHz, and a requested rate of 4.285715 MHz. This results in a theorical divider of 41.999993 which is then rounded up to 42. The .round_rate function would then return (180 MHz / 42) as the clock, rounded down, so 4.285714 MHz. Calling clk_set_rate on 4.285714 MHz would round the rate again, and give a theorical divider of 42,0000028, now rounded up to 43, and the rate returned would be (180 MHz / 43) which is 4.186046 MHz, aka. not what we requested. Fix this by rounding up the divisions. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Maarten ter Huurne <maarten@treewalker.org> Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: clk-twl6040: Fix imprecise external abort for pdmclkTony Lindgren2019-03-231-2/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 5ae51d67aec95f6f9386aa8dd5db424964895575 upstream. I noticed that modprobe clk-twl6040 can fail after a cold boot with: abe_cm:clk:0010:0: failed to enable ... Unhandled fault: imprecise external abort (0x1406) at 0xbe896b20 WARNING: CPU: 1 PID: 29 at drivers/clk/clk.c:828 clk_core_disable_lock+0x18/0x24 ... (clk_core_disable_lock) from [<c0123534>] (_disable_clocks+0x18/0x90) (_disable_clocks) from [<c0124040>] (_idle+0x17c/0x244) (_idle) from [<c0125ad4>] (omap_hwmod_idle+0x24/0x44) (omap_hwmod_idle) from [<c053a038>] (sysc_runtime_suspend+0x48/0x108) (sysc_runtime_suspend) from [<c06084c4>] (__rpm_callback+0x144/0x1d8) (__rpm_callback) from [<c0608578>] (rpm_callback+0x20/0x80) (rpm_callback) from [<c0607034>] (rpm_suspend+0x120/0x694) (rpm_suspend) from [<c0607a78>] (__pm_runtime_idle+0x60/0x84) (__pm_runtime_idle) from [<c053aaf0>] (sysc_probe+0x874/0xf2c) (sysc_probe) from [<c05fecd4>] (platform_drv_probe+0x48/0x98) After searching around for a similar issue, I came across an earlier fix that never got merged upstream in the Android tree for glass-omap-xrr02. There is patch "MFD: twl6040-codec: Implement PDMCLK cold temp errata" by Misael Lopez Cruz <misael.lopez@ti.com>. Based on my observations, this fix is also needed when cold booting devices, and not just for deeper idle modes. Since we now have a clock driver for pdmclk, let's fix the issue in twl6040_pdmclk_prepare(). Cc: Misael Lopez Cruz <misael.lopez@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: sunxi: A31: Fix wrong AHB gate numberAndre Przywara2019-03-231-2/+2
| | | | | | | | | | | | | | [ Upstream commit ee0b27a3a4da0b0ed2318aa092f8856896e9450b ] According to the manual the gate clock for MMC3 is at bit 11, and NAND1 is controlled by bit 12. Fix the gate bit definitions in the clock driver. Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: imx6sl: ensure MMDC CH0 handshake is bypassedAnson Huang2019-02-121-0/+6
| | | | | | | | | | | | | [ Upstream commit 0efcc2c0fd2001a83240a8c3d71f67770484917e ] Same as other i.MX6 SoCs, ensure unused MMDC channel's handshake is bypassed, this is to make sure no request signal will be generated when periphe_clk_sel is changed or SRC warm reset is triggered. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: sunxi-ng: a33: Set CLK_SET_RATE_PARENT for all audio module clocksChen-Yu Tsai2019-02-121-3/+3
| | | | | | | | | | | | | | | | | | [ Upstream commit 6e6da2039c82271dd873b9ad2b902a692a7dd554 ] All the audio interfaces on Allwinner SoCs need to change their module clocks during operation, to switch between support for 44.1 kHz and 48 kHz family sample rates. The clock rate for the module clocks is governed by their upstream audio PLL. The module clocks themselves only have a gate, and sometimes a divider or mux. Thus any rate changes need to be propagated upstream. Set the CLK_SET_RATE_PARENT flag for all audio module clocks to achieve this. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: imx6q: reset exclusive gates on initLucas Stach2019-01-261-1/+5
| | | | | | | | | | | | | | | | | [ Upstream commit f7542d817733f461258fd3a47d77da35b2d9fc81 ] The exclusive gates may be set up in the wrong way by software running before the clock driver comes up. In that case the exclusive setup is locked in its initial state, as the complementary function can't be activated without disabling the initial setup first. To avoid this lock situation, reset the exclusive gates to the off state and allow the kernel to provide the proper setup. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Dong Aisheng <Aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: rockchip: fix typo in rk3188 spdif_frac parentJohan Jonker2019-01-091-1/+1
| | | | | | | | | | | | | | | commit 8b19faf6fae2867e2c177212c541e8ae36aa4d32 upstream. Fix typo in common_clk_branches. Make spdif_pre parent of spdif_frac. Fixes: 667464208989 ("clk: rockchip: include downstream muxes into fractional dividers") Cc: stable@vger.kernel.org Signed-off-by: Johan Jonker <jbx9999@hotmail.com> Acked-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: mmp: Off by one in mmp_clk_add()Dan Carpenter2018-12-211-1/+1
| | | | | | | | | | | | | | | [ Upstream commit 2e85c57493e391b93445c1e0d530b36b95becc64 ] The > comparison should be >= or we write one element beyond the end of the unit->clk_table[] array. (The unit->clk_table[] array is allocated in the mmp_clk_init() function and it has unit->nr_clks elements). Fixes: 4661fda10f8b ("clk: mmp: add basic support functions for DT support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: mvebu: Off by one bugs in cp110_of_clk_get()Dan Carpenter2018-12-211-2/+2
| | | | | | | | | | | | | | | | | | | | [ Upstream commit d9f5b7f5dd0fa74a89de5a7ac1e26366f211ccee ] These > comparisons should be >= to prevent reading beyond the end of of the clk_data->hws[] buffer. The clk_data->hws[] array is allocated in cp110_syscon_common_probe() when we do: cp110_clk_data = devm_kzalloc(dev, sizeof(*cp110_clk_data) + sizeof(struct clk_hw *) * CP110_CLK_NUM, GFP_KERNEL); As you can see, it has CP110_CLK_NUM elements which is equivalent to CP110_MAX_CORE_CLOCKS + CP110_MAX_GATABLE_CLOCKS. Fixes: d3da3eaef7f4 ("clk: mvebu: new driver for Armada CP110 system controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: fixed-factor: fix of_node_get-put imbalanceRicardo Ribalda Delgado2018-11-271-0/+1
| | | | | | | | | | | | | | | [ Upstream commit f98e8a572bddbf27032114127d2fcc78fa5e6a9d ] When the fixed factor clock is created by devicetree, of_clk_add_provider is called. Add a call to of_clk_del_provider in the remove function to balance it out. Reported-by: Alan Tull <atull@kernel.org> Fixes: 971451b3b15d ("clk: fixed-factor: Convert into a module platform driver") Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: samsung: exynos5420: Enable PERIS clocks for suspendMarek Szyprowski2018-11-271-0/+1
| | | | | | | | | | | | | [ Upstream commit b33228029d842269e17bba591609e83ed422005d ] Ensure that clocks for core SoC modules (including TZPC0..9 modules) are enabled for suspend/resume cycle. This fixes suspend/resume support on Exynos5422-based Odroid XU3/XU4 boards. Suggested-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: fixed-rate: fix of_node_get-put imbalanceAlan Tull2018-11-271-0/+1
| | | | | | | | | | | | | | [ Upstream commit 52091c256bdcad0d01e2852a63f19cd2cce6af96 ] When the fixed rate clock is created by devicetree, of_clk_add_provider is called. Add a call to of_clk_del_provider in the remove function to balance it out. Signed-off-by: Alan Tull <atull@kernel.org> Fixes: 435779fe1336 ("clk: fixed-rate: Convert into a module platform driver") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* reset: hisilicon: fix potential NULL pointer dereferenceGustavo A. R. Silva2018-11-211-3/+2
| | | | | | | | | | | | | | | | | | | | commit e9a2310fb689151166df7fd9971093362d34bd79 upstream. There is a potential execution path in which function platform_get_resource() returns NULL. If this happens, we will end up having a NULL pointer dereference. Fix this by replacing devm_ioremap with devm_ioremap_resource, which has the NULL check and the memory region request. This code was detected with the help of Coccinelle. Cc: stable@vger.kernel.org Fixes: 97b7129cd2af ("reset: hisilicon: change the definition of hisi_reset_init") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: rockchip: Fix static checker warning in rockchip_ddrclk_get_parent callEnric Balletbo i Serra2018-11-211-4/+0
| | | | | | | | | | | | | | | | | | commit 665636b2940d0897c4130253467f5e8c42eea392 upstream. Fixes the signedness bug returning '(-22)' on the return type by removing the sanity checker in rockchip_ddrclk_get_parent(). The function should return and unsigned value only and it's safe to remove the sanity checker as the core functions that call get_parent like clk_core_get_parent_by_index already ensures the validity of the clk index returned (index >= core->num_parents). Fixes: a4f182bf81f18 ("clk: rockchip: add new clock-type for the ddrclk") Cc: stable@vger.kernel.org Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: at91: Fix division by zero in PLL recalc_rate()Ronald Wahl2018-11-211-0/+3
| | | | | | | | | | | | | | | | | commit 0f5cb0e6225cae2f029944cb8c74617aab6ddd49 upstream. Commit a982e45dc150 ("clk: at91: PLL recalc_rate() now using cached MUL and DIV values") removed a check that prevents a division by zero. This now causes a stacktrace when booting the kernel on a at91 platform if the PLL DIV register contains zero. This commit reintroduces this check. Fixes: a982e45dc150 ("clk: at91: PLL recalc_rate() now using cached...") Cc: <stable@vger.kernel.org> Signed-off-by: Ronald Wahl <rwahl@gmx.de> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: s2mps11: Fix matching when built as module and DT node contains compatibleKrzysztof Kozlowski2018-11-211-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 8985167ecf57f97061599a155bb9652c84ea4913 upstream. When driver is built as module and DT node contains clocks compatible (e.g. "samsung,s2mps11-clk"), the module will not be autoloaded because module aliases won't match. The modalias from uevent: of:NclocksT<NULL>Csamsung,s2mps11-clk The modalias from driver: platform:s2mps11-clk The devices are instantiated by parent's MFD. However both Device Tree bindings and parent define the compatible for clocks devices. In case of module matching this DT compatible will be used. The issue will not happen if this is a built-in (no need for module matching) or when clocks DT node does not contain compatible (not correct from bindings perspective but working for driver). Note when backporting to stable kernels: adjust the list of device ID entries. Cc: <stable@vger.kernel.org> Fixes: 53c31b3437a6 ("mfd: sec-core: Add of_compatible strings for clock MFD cells") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: samsung: Fix m2m scaler clock on Exynos542xAndrzej Pietrasiewicz2018-11-101-1/+1
| | | | | | | | | | | | | | | [ Upstream commit c07c1a0f68d0f2f7ca9aff924e2772526027b019 ] The TOP "aclk400_mscl" clock should be kept enabled all the time to allow proper access to power management control for MSC power domain and devices that are a part of it. This change is required for the scaler to work properly after domain power on/off sequence. Fixes: 318fa46cc60d ("clk/samsung: exynos542x: mark some clocks as critical") Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* clk: clk-fixed-factor: Clear OF_POPULATED flag in case of failureRajan Vaja2018-09-261-1/+8
| | | | | | | | | | | | | | | | | | | [ Upstream commit f6dab4233d6b64d719109040503b567f71fbfa01 ] Fixed factor clock has two initializations at of_clk_init() time and during platform driver probe. Before of_clk_init() call, node is marked as populated and so its probe never gets called. During of_clk_init() fixed factor clock registration may fail if any of its parent clock is not registered. In this case, it doesn't get chance to retry registration from probe. Clear OF_POPULATED flag if fixed factor clock registration fails so that clock registration is attempted again from probe. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: imx6ul: fix missing of_node_put()Nicholas Mc Guire2018-09-261-0/+1
| | | | | | | | | | | | | | [ Upstream commit 11177e7a7aaef95935592072985526ebf0a3df43 ] of_find_compatible_node() is returning a device node with refcount incremented and must be explicitly decremented after the last use which is right after the us in of_iomap() here. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Fixes: 787b4271a6a0 ("clk: imx: add imx6ul clk tree support") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399Levin Du2018-09-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 640332d1a089909df08bc9f3e42888a2019c66e2 ] PWM2 is commonly used to control voltage of PWM regulator of VDD_LOG in RK3399. On the Firefly-RK3399 board, PWM2 outputs 40 KHz square wave from power on and the VDD_LOG is about 0.9V. When the kernel boots normally into the system, the PWM2 keeps outputing PWM signal. But the kernel hangs randomly after "Starting kernel ..." line on that board. When it happens, PWM2 outputs high level which causes VDD_LOG drops to 0.4V below the normal operating voltage. By adding "pclk_rkpwm_pmu" to the rk3399_pmucru_critical_clocks array, PWM clock is ensured to be prepared at startup and the PWM2 output is normal. After repeated tests, the early boot hang is gone. This patch works on both Firefly-RK3399 and ROC-RK3399-PC boards. Signed-off-by: Levin Du <djw@t-chip.com.cn> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: rockchip: fix clk_i2sout parent selection bits on rk3399Alberto Panizzo2018-09-051-1/+1
| | | | | | | | | | | | | | commit a64ad008980c65d38e6cf6858429c78e6b740c41 upstream. Register, shift and mask were wrong according to datasheet. Fixes: 115510053e5e ("clk: rockchip: add clock controller for the RK3399") Cc: stable@vger.kernel.org Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com> Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: at91: PLL recalc_rate() now using cached MUL and DIV valuesMarcin Ziemianowicz2018-07-031-12/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit a982e45dc150da3a08907b6dd676b735391704b4 upstream. When a USB device is connected to the USB host port on the SAM9N12 then you get "-62" error which seems to indicate USB replies from the device are timing out. Based on a logic sniffer, I saw the USB bus was running at half speed. The PLL code uses cached MUL and DIV values which get set in set_rate() and applied in prepare(), but the recalc_rate() function instead queries the hardware instead of using these cached values. Therefore, if recalc_rate() is called between a set_rate() and prepare(), the wrong frequency is calculated and later the USB clock divider for the SAM9N12 SOC will be configured for an incorrect clock. In my case, the PLL hardware was set to 96 Mhz before the OHCI driver loads, and therefore the usb clock divider was being set to /2 even though the OHCI driver set the PLL to 48 Mhz. As an alternative explanation, I noticed this was fixed in the past by 87e2ed338f1b ("clk: at91: fix recalc_rate implementation of PLL driver") but the bug was later re-introduced by 1bdf02326b71 ("clk: at91: make use of syscon/regmap internally"). Fixes: 1bdf02326b71 ("clk: at91: make use of syscon/regmap internally) Cc: <stable@vger.kernel.org> Signed-off-by: Marcin Ziemianowicz <marcin@ziemianowicz.com> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: renesas: cpg-mssr: Stop using printk format %pCrGeert Uytterhoeven2018-07-031-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit ef4b0be62641d296cf4c0ad8f75ab83ab066ed51 upstream. Printk format "%pCr" will be removed soon, as clk_get_rate() must not be called in atomic context. Replace it by open-coding the operation. This is safe here, as the code runs in task context. Link: http://lkml.kernel.org/r/1527845302-12159-2-git-send-email-geert+renesas@glider.be To: Jia-Ju Bai <baijiaju1990@gmail.com> To: Jonathan Corbet <corbet@lwn.net> To: Michael Turquette <mturquette@baylibre.com> To: Stephen Boyd <sboyd@kernel.org> To: Zhang Rui <rui.zhang@intel.com> To: Eduardo Valentin <edubezval@gmail.com> To: Eric Anholt <eric@anholt.net> To: Stefan Wahren <stefan.wahren@i2se.com> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-doc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org # 4.5+ Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: samsung: exynos3250: Fix PLL ratesAndrzej Hajda2018-05-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit a8321e7887410a2b2e80ab89d1ef7b30562658ea ] Rates declared in PLL rate tables should match exactly rates calculated from PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. In this patch an erroneous P value for 74176002 output frequency is also corrected. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: samsung: exynos5250: Fix PLL ratesAndrzej Hajda2018-05-251-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 2ac051eeabaa411ef89ae7cd5bb8e60cb41ad780 ] Rates declared in PLL rate tables should match exactly rates calculated from PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: samsung: exynos5433: Fix PLL ratesAndrzej Hajda2018-05-251-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit ab0447845cffc0fd752df2ccd6b4e34006000ce4 ] Rates declared in PLL rate tables should match exactly rates calculated from the PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: samsung: exynos5260: Fix PLL ratesAndrzej Hajda2018-05-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit cdb68fbd4e7962be742c4f29475220c5bf28d8a5 ] Rates declared in PLL rate tables should match exactly rates calculated from the PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: samsung: exynos7: Fix PLL ratesAndrzej Hajda2018-05-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 7e4db0c2836e892766565965207eee051c8037b9 ] Rates declared in PLL rate tables should match exactly rates calculated from the PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: samsung: s3c2410: Fix PLL ratesAndrzej Hajda2018-05-251-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 179db533c08431f509a3823077549773d519358b ] Rates declared in PLL rate tables should match exactly rates calculated from the PLL coefficients. If that is not the case, rate of the PLL's child clock might be set not as expected. For instance, if in the PLL rates table we have a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate will return 393216003. If we now attempt to set rate of a PLL's child divider clock to 393216000/2 its rate will be 131072001, rather than 196608000. That is, the divider will be set to 3 instead of 2, because 393216003/2 is greater than 196608000. To fix this issue declared rates are changed to exactly match rates generated by the PLL, as calculated from the P, M, S, K coefficients. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: rockchip: Prevent calculating mmc phase if clock rate is zeroShawn Lin2018-05-251-0/+23
| | | | | | | | | | | | | | | | | [ Upstream commit 4bf59902b50012b1dddeeaa23b217d9c4956cdda ] The MMC sample and drv clock for rockchip platforms are derived from the bus clock output to the MMC/SDIO card. So it should never happens that the clk rate is zero given it should inherits the clock rate from its parent. If something goes wrong and makes the clock rate to be zero, the calculation would be wrong but may still make the mmc tuning process work luckily. However it makes people harder to debug when the following data transfer is unstable. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: tegra: Fix pll_u rate configurationMarcel Ziswiler2018-05-251-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c35b518f9ba06c9de79fb3ff62eed7462d804995 ] Turns out latest upstream U-Boot does not configure/enable pll_u which leaves it at some default rate of 500 kHz: root@apalis-t30:~# cat /sys/kernel/debug/clk/clk_summary | grep pll_u pll_u 3 3 0 500000 0 Of course this won't quite work leading to the following messages: [ 6.559593] usb 2-1: new full-speed USB device number 2 using tegra- ehci [ 11.759173] usb 2-1: device descriptor read/64, error -110 [ 27.119453] usb 2-1: device descriptor read/64, error -110 [ 27.389217] usb 2-1: new full-speed USB device number 3 using tegra- ehci [ 32.559454] usb 2-1: device descriptor read/64, error -110 [ 47.929777] usb 2-1: device descriptor read/64, error -110 [ 48.049658] usb usb2-port1: attempt power cycle [ 48.759475] usb 2-1: new full-speed USB device number 4 using tegra- ehci [ 59.349457] usb 2-1: device not accepting address 4, error -110 [ 59.509449] usb 2-1: new full-speed USB device number 5 using tegra- ehci [ 70.069457] usb 2-1: device not accepting address 5, error -110 [ 70.079721] usb usb2-port1: unable to enumerate USB device Fix this by actually allowing the rate also being set from within the Linux kernel. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: Don't show the incorrect clock phaseShawn Lin2018-05-251-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 1f9c63e8de3d7b377c9d74e4a17524cfb60e6384 ] It's found that the clock phase output from clk_summary is wrong compared to the actual phase reading from the register. cat /sys/kernel/debug/clk/clk_summary | grep sdio_sample sdio_sample 0 1 0 50000000 0 -22 It exposes an issue that clk core, clk_core_get_phase, always returns the cached core->phase which should be either updated by calling clk_set_phase or directly from the first place the clk was registered. When registering the clk, the core->phase geting from ->get_phase() may return negative value indicating error. This is quite common since the clk's phase may be highly related to its parent chain, but it was temporarily orphan when registered, since its parent chains hadn't be ready at that time, so the clk drivers decide to return error in this case. However, if no clk_set_phase is called or maybe the ->set_phase() isn't even implemented, the core->phase would never be updated. This is wrong, and we should try to update it when all its parent chains are settled down, like the way of updating clock rate for that. But it's not deserved to complicate the code now and just update it anyway when calling clk_core_get_phase, which would be much simple and enough. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228Shawn Lin2018-05-251-1/+1
| | | | | | | | | | | | | | | | | | [ Upstream commit 4b0556a441dd37e598887215bc89b49a6ef525b3 ] commit c420c1e4db22 ("clk: rockchip: Prevent calculating mmc phase if clock rate is zero") catches one gremlin again for clk-rk3228.c that the parent of SDMMC phase clock should be sclk_sdmmc0, but not sclk_sdmmc. However, the naming of the sdmmc clocks varies in the manual with the card clock having the 0 while the hclk is named without appended 0. So standardize one one format to prevent confusion, as there also is only one (non-sdio) mmc controller on the soc. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: bcm2835: De-assert/assert PLL reset signal when appropriateBoris Brezillon2018-04-241-3/+5
| | | | | | | | | | | | | | | | | commit 753872373b599384ac7df809aa61ea12d1c4d5d1 upstream. In order to enable a PLL, not only the PLL has to be powered up and locked, but you also have to de-assert the reset signal. The last part was missing. Add it so PLLs that were not enabled by the FW/bootloader can be enabled from Linux. Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: fix false-positive Wmaybe-uninitialized warningArnd Bergmann2018-04-241-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit ce33f284935e08229046b30635e6aadcbab02b53 upstream. When we build this driver with on x86-32, gcc produces a false-positive warning: drivers/clk/renesas/clk-sh73a0.c: In function 'sh73a0_cpg_clocks_init': drivers/clk/renesas/clk-sh73a0.c:155:10: error: 'parent_name' may be used uninitialized in this function [-Werror=maybe-uninitialized] return clk_register_fixed_factor(NULL, name, parent_name, 0, We can work around that warning by adding a fake initialization, I tried and failed to come up with any better workaround. This is currently one of few remaining warnings for a 4.14.y randconfig build, so it would be good to also have it backported at least to that version. Older versions have more randconfig warnings, so we might not care. I had not noticed this earlier, because one patch in my randconfig test tree removes the '-ffreestanding' option on x86-32, and that avoids the warning. The -ffreestanding flag was originally global but moved into arch/i386 by Andi Kleen in commit 6edfba1b33c7 ("[PATCH] x86_64: Don't define string functions to builtin") as a 'temporary workaround'. Like many temporary hacks, this turned out to be rather long-lived, from all I can tell we still need a simple fix to asm/string_32.h before it can be removed, but I'm not sure about how to best do that. Cc: stable@vger.kernel.org Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: mvebu: armada-38x: add support for missing clocksRichard Genoud2018-04-241-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6a4a4595804548e173f0763a0e7274a3521c59a9 upstream. Clearfog boards can come with a CPU clocked at 1600MHz (commercial) or 1333MHz (industrial). They have also some dip-switches to select a different clock (666, 800, 1066, 1200). The funny thing is that the recovery button is on the MPP34 fq selector. So, when booting an industrial board with this button down, the frequency 666MHz is selected (and the kernel didn't boot). This patch add all the missing clocks. The only mode I didn't test is 2GHz (uboot found 4294MHz instead :/ ). Fixes: 0e85aeced4d6 ("clk: mvebu: add clock support for Armada 380/385") Cc: <stable@vger.kernel.org> # 3.16.x: 9593f4f56cf5: clk: mvebu: armada-38x: add support for 1866MHz variants Cc: <stable@vger.kernel.org> # 3.16.x Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: mvebu: armada-38x: add support for 1866MHz variantsRalph Sennhauser2018-04-241-3/+4
| | | | | | | | | | | | | | | | | commit 9593f4f56cf5d1c443f66660a0c7f01de38f979d upstream. The Linksys WRT3200ACM CPU is clocked at 1866MHz. Add 1866MHz to the list of supported CPU frequencies. Also update multiplier and divisor for the l2clk and ddrclk. Noticed by the following warning: [ 0.000000] Selected CPU frequency (16) unsupported Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: at91: fix clk-generated compilationAlexandre Belloni2018-04-131-0/+1
| | | | | | | | | | | | commit 4a5f06a01cfd1f7a9141bdb760bf5b68cca7f224 upstream. Fix missing } Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: meson: meson8b: add compatibles for Meson8 and Meson8m2Martin Blumenstingl2018-04-132-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 855f06a1009faabb0c6a3e9b49d115496d325856 ] The clock controller on Meson8, Meson8b and Meson8m2 is very similar based on the code from the Amlogic GPL kernel sources. Add separate compatibles for each SoC to make sure that we can easily implement all the small differences for each SoC later on. In general the Meson8 and Meson8m2 seem to be almost identical as they even share the same mach-meson8 directory in Amlogic's GPL kernel sources. The main clocks on Meson8, Meson8b and Meson8m2 are very similar, because they are all using the same PLL values, 90% of the clock gates are the same (the actual diffstat of the mach-meson8/clock.c and mach-meson8b/clock.c files is around 30 to 40 lines, when excluding all commented out code). The difference between the Meson8 and Meson8b clock gates seem to be: - Meson8 has AIU_PCLK, HDMI_RX, VCLK2_ENCT, VCLK2_ENCL, UART3, CSI_DIG_CLKIN gates which don't seem to be available on Meson8b - the gate on Meson8 for bit 7 seems to be named "_1200XXX" instead of "PERIPHS_TOP" (on Meson8b) - Meson8b has a SANA gate which doesn't seem to exist on Meson8 (or on Meson8 the same bit is used by the UART3 gate in Amlogic's GPL kernel sources) None of these gates is added for now, since it's unclear whether these definitions are actually correct (the VCLK2_ENCT gate for example is defined, but only used in some commented block). The main difference between all three SoCs seem to be the video (VPU) clocks. Apart from different supported clock rates (according to vpu.c in mach-meson8 and mach-meson8b from Amlogic's GPL kernel sources) the most notable difference is that Meson8m2 has a GP_PLL clock and a mux (probably the same as on the Meson GX SoCs) to support glitch-free (clock rate) switching. None of these VPU clocks are not supported by our mainline meson8b clock driver yet though. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: Fix __set_clk_rates error print-stringBryan O'Donoghue2018-04-131-1/+1
| | | | | | | | | | | | | | | [ Upstream commit ee177c5d6369f8e5d3e4793dce501cf4431313a1 ] When failing to set a clock the printout emitted is incorrect. "u32 rate" is formatted as %d and should be %u whereas "unsigned long clk_set_rate()" is formatted as %ld and should be %lu as per Documentation/printk-formats.txt. Fixes: 2885c3b2a3da ("clk: Show correct information when fail to set clock rate") Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: scpi: fix return type of __scpi_dvfs_round_rateSudeep Holla2018-04-131-3/+3
| | | | | | | | | | | | | | | | | | [ Upstream commit 7374aec95636ca39409545eba4ef5ff3125c2346 ] The frequencies above the maximum value of signed integer(i.e. 2^31 -1) will overflow with the current code. This patch fixes the return type of __scpi_dvfs_round_rate from 'int' to 'unsigned long'. Fixes: cd52c2a4b5c4 ("clk: add support for clocks provided by SCP(System Control Processor)") Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: at91: fix clk-generated parentingAlexandre Belloni2018-04-131-2/+1
| | | | | | | | | | | | | | [ Upstream commit 8e56133e5c7b7a7a97f6a92d92f664d5ecd30745 ] clk_generated_startup is called after clk_hw_register. So the first call to get_parent will not have the correct value (i.e. 0) and because this is cached, it may never be updated. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Fixes: df70aeef6083 ("clk: at91: add generated clock driver") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: renesas: rcar-gen2: Fix PLL0 on R-Car V2H and E2Geert Uytterhoeven2018-04-131-4/+19
| | | | | | | | | | | | | | | | | | | [ Upstream commit b7c563c489e94417efbad68d057ea5d2030ae44c ] R-Car V2H and E2 do not have the PLL0CR register, but use a fixed multiplier (depending on mode pins) and divider. This corrects the clock rate of "pll0" (PLL0 VCO after post divider) on R-Car V2H and E2 from 1.5 GHz to 1 GHz. Inspired by Sergei Shtylyov's work for the common R-Car Gen2 and RZ/G Clock Pulse Generator support core. Fixes: 7c4163aae3d8e5b9 ("ARM: dts: r8a7792: initial SoC device tree") Fixes: 0dce5454d5c25858 ("ARM: shmobile: Initial r8a7794 SoC device tree") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: sunxi-ng: a31: Fix CLK_OUT_* clock opsChen-Yu Tsai2018-03-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 5682e268350f9eccdbb04006605c1b7068a7b323 upstream. When support for the A31/A31s CCU was first added, the clock ops for the CLK_OUT_* clocks was set to the wrong type. The clocks are MP-type, but the ops was set for div (M) clocks. This went unnoticed until now. This was because while they are different clocks, their data structures aligned in a way that ccu_div_ops would access the second ccu_div_internal and ccu_mux_internal structures, which were valid, if not incorrect. Furthermore, the use of these CLK_OUT_* was for feeding a precise 32.768 kHz clock signal to the WiFi chip. This was achievable by using the parent with the same clock rate and no divider. So the incorrect divider setting did not affect this usage. Commit 946797aa3f08 ("clk: sunxi-ng: Support fixed post-dividers on MP style clocks") added a new field to the ccu_mp structure, which broke the aforementioned alignment. Now the system crashes as div_ops tries to look up a nonexistent table. Reported-by: Philipp Rossak <embed3d@gmail.com> Tested-by: Philipp Rossak <embed3d@gmail.com> Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks") Cc: <stable@vger.kernel.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: bcm2835: Protect sections updating shared registersBoris Brezillon2018-03-281-0/+4
| | | | | | | | | | | | | | | | commit 7997f3b2df751aab0b8e60149b226a32966c41ac upstream. CM_PLLx and A2W_XOSC_CTRL registers are accessed by different clock handlers and must be accessed with ->regs_lock held. Update the sections where this protection is missing. Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: bcm2835: Fix ana->maskX definitionsBoris Brezillon2018-03-281-4/+4
| | | | | | | | | | | | | | | | | | | | commit 49012d1bf5f78782d398adb984a080a88ba42965 upstream. ana->maskX values are already '~'-ed in bcm2835_pll_set_rate(). Remove the '~' in the definition to fix ANA setup. Note that this commit fixes a long standing bug preventing one from using an HDMI display if it's plugged after the FW has booted Linux. This is because PLLH is used by the HDMI encoder to generate the pixel clock. Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: migrate the count of orphaned clocks at initJerome Brunet2018-03-241-16/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 99652a469df19086d594e8e89757d4081a812789 upstream. The orphan clocks reparents should migrate any existing count from the orphan clock to its new acestor clocks, otherwise we may have inconsistent counts in the tree and end-up with gated critical clocks Assuming we have two clocks, A and B. * Clock A has CLK_IS_CRITICAL flag set. * Clock B is an ancestor of A which can gate. Clock B gate is left enabled by the bootloader. Step 1: Clock A is registered. Since it is a critical clock, it is enabled. The clock being still an orphan, no parent are enabled. Step 2: Clock B is registered and reparented to clock A (potentially through several other clocks). We are now in situation where the enable count of clock A is 1 while the enable count of its ancestors is 0, which is not good. Step 3: in lateinit, clk_disable_unused() is called, the enable_count of clock B being 0, clock B is gated and and critical clock A actually gets disabled. This situation was found while adding fdiv_clk gates to the meson8b platform. These clocks parent clk81 critical clock, which is the mother of all peripheral clocks in this system. Because of the issue described here, the system is crashing when clk_disable_unused() is called. The situation is solved by reverting commit f8f8f1d04494 ("clk: Don't touch hardware when reparenting during registration"). To avoid breaking again the situation described in this commit description, enabling critical clock should be done before walking the orphan list. This way, a parent critical clock may not be accidentally disabled due to the CLK_OPS_PARENT_ENABLE mechanism. Fixes: f8f8f1d04494 ("clk: Don't touch hardware when reparenting during registration") Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: si5351: Rename internal plls to avoid name collisionsSergej Sawazki2018-03-241-1/+1
| | | | | | | | | | | | | | | | | [ Upstream commit cdba9a4fb0b53703959ac861e415816cb61aded4 ] This drivers probe fails due to a clock name collision if a clock named 'plla' or 'pllb' is already registered when registering this drivers internal plls. Fix it by renaming internal plls to avoid name collisions. Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Sergej Sawazki <sergej@taudac.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: axi-clkgen: Correctly handle nocount bit in recalc_rate()Lars-Peter Clausen2018-03-241-5/+24
| | | | | | | | | | | | | | | | | | [ Upstream commit 063578dc5f407f67d149133818efabe457daafda ] If the nocount bit is set the divider is bypassed and the settings for the divider count should be ignored and a divider value of 1 should be assumed. Handle this correctly in the driver recalc_rate() callback. While the driver sets up the part so that the read back dividers values yield the correct result the power-on reset settings of the part might not reflect this and hence calling e.g. clk_get_rate() without prior calls to clk_set_rate() will yield the wrong result. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
View Lorry Controller Status