summaryrefslogtreecommitdiff
path: root/drivers/mtd
Commit message (Collapse)AuthorAgeFilesLines
* mtd: nand: pass proper 'oob_required' parameterBrian Norris2012-05-131-6/+8
| | | | | | | | | | | | | | | We now have an interface for notifying the nand_ecc_ctrl functions when OOB data must be returned to the upper layers and when it may be left untouched. This patch fills in the 'oob_required' parameter properly from nand_do_{read,write}_ops. When utilized properly in the lower layers, this parameter can improve performance and/or reduce complexity for NAND HW and SW that can simply avoid transferring the OOB data. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: add 'oob_required' argument to NAND {read,write}_page interfacesBrian Norris2012-05-1314-67/+84
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New NAND controllers can perform read/write via HW engines which don't expose OOB data in their DMA mode. To reflect this, we should rework the nand_chip / nand_ecc_ctrl interfaces that assume that drivers will always read/write OOB data in the nand_chip.oob_poi buffer. A better interface includes a boolean argument that explicitly tells the callee when OOB data is requested by the calling layer (for reading/writing to/from nand_chip.oob_poi). This patch adds the 'oob_required' parameter to each relevant {read,write}_page interface; all 'oob_required' parameters are left unused for now. The next patch will set the parameter properly in the nand_base.c callers, and follow-up patches will make use of 'oob_required' in some of the callee functions. Note that currently, there is no harm in ignoring the 'oob_required' parameter and *always* utilizing nand_chip.oob_poi, but there can be performance/complexity/design benefits from avoiding filling oob_poi in the common case. I will try to implement this for some drivers which can be ported easily. Note: I couldn't compile-test all of these easily, as some had ARCH dependencies. [dwmw2: Merge later 1/0 vs. true/false cleanup] Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Acked-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: add read_byte support to plat_nandJohn Crispin2012-05-131-0/+1
| | | | | | | | | | | Lantiq SoCs have a External Bus Unit (EBU) that is used to attach MTD media. As we need to co-exist with PCI on the same bus, certain swapping settings must be applied. Similar to the NOR map driver we need to apply a fix to make NAND work. The easiest way is to use byte reads. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* OF: MTD: make plat_nand loadable from DTJohn Crispin2012-05-131-6/+15
| | | | | | | | | | | | | This patch sets the of_match_table field inside plat_nand's platform_driver. We also add a struct mtd_part_parser_data pointer to make sure of_part parsing works. If an arch wants to support plat_nand via DT it needs to setup the platform_nand_data and hook it into the platform_device. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: add m25p80 id for mx25l2005aJohn Crispin2012-05-131-0/+1
| | | | | | | | Add the id and sector mappings for mx25l2005a flash chips. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: m25p80: add support for Everspin MR25H256 MRAM chipMarek Vasut2012-05-131-0/+3
| | | | | | | | This chip isn't JEDEC-compatible. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: kill NAND_NO_AUTOINCR optionBrian Norris2012-05-1314-30/+11
| | | | | | | | No drivers use auto-increment NAND, so kill the NO_AUTOINCR option entirely. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: remove autoincrement 'sndcmd' codeBrian Norris2012-05-131-37/+6
| | | | | | | | | | | The NAND_NO_AUTOINCR option is always set, so we will kill the option and make "no autoincrement" the default behavior for nand_base.c. Thus, we should remove the code which decides whether or not to send the NAND_CMD_READ0 command. Instead, we unconditionally send the command. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nandsim: remove autoincrement codeBrian Norris2012-05-131-25/+3
| | | | | | | | | | The NAND layer always has NAND_NO_AUTOINCR set, so we will never utilize the AUTOINCR code in nandsim. We will be removing the NAND_NO_AUTOINCR option soon, and so kill this code as well. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: driver _read() returns max_bitflips; mtd_read() returns -EUCLEANMike Dunn2012-05-136-17/+43
| | | | | | | | | | | | | | | | | | | | | | | The drivers' _read() method, absent an error, returns a non-negative integer indicating the maximum number of bit errors that were corrected in any one region comprising an ecc step. MTD returns -EUCLEAN if this is >= bitflip_threshold, 0 otherwise. If bitflip_threshold is zero, the comparison is not made since these devices lack ECC and always return zero in the non-error case (thanks Brian)¹. Note that this is a subtle change to the driver interface. This and the preceding patches in this set were tested with ubi on top of the nandsim and docg4 devices, running the ubi test io_basic from mtd-utils. ¹ http://lists.infradead.org/pipermail/linux-mtd/2012-March/040468.html Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Brian Norris <computersforpeace@gmail.com> Ivan Djelic <ivan.djelic@parrot.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: add sanity check of ecc strength to nand_scan_tail()Mike Dunn2012-05-131-2/+7
| | | | | | | | | | | | | | | This patch adds sanity checks that ensure that drivers for controllers with hardware ECC set the 'strength' element in struct nand_ecc_ctrl. Also stylistic changes to the line that calculates strength for software ECC. This v2 simplifies the check. Thanks Brian!¹ ¹ http://lists.infradead.org/pipermail/linux-mtd/2012-April/040890.html Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: read_page() returns max_bitflipsMike Dunn2012-05-1310-38/+82
| | | | | | | | | | | | | | | The ecc.read_page() method for nand drivers is changed to return the maximum number of bitflips that were corrected on any one region covering an ecc step, This patch doesn't change what the nand code returns to mtd. This v2 includes the change to the fsl_ifc_nand driver requested by Scott¹. ¹ http://lists.infradead.org/pipermail/linux-mtd/2012-April/040883.html Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by (freescale changes): Scott Wood <scottwood@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: bitflip_threshold added to mtd_info and sysfsMike Dunn2012-05-132-0/+35
| | | | | | | | | | | | | | | | An element 'bitflip_threshold' is added to struct mtd_info, and also exposed as a read/write variable in sysfs. This will be used to determine whether or not mtd_read() returns -EUCLEAN or 0 (absent a hard error). If the driver leaves it as zero, mtd will set it to a default value of ecc_strength. This v2 adds the line that propagates bitflip_threshold from the master to the partitions - thanks Ivan¹. ¹ http://lists.infradead.org/pipermail/linux-mtd/2012-April/040900.html Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: expose ecc_strength through sysfsMike Dunn2012-05-131-0/+10
| | | | | | | | | ecc_strength element of struct mtd_info is exposed as a read-only variable in sysfs. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: fix incorrect ecc strength valuesMike Dunn2012-05-133-11/+3
| | | | | | | | | | | | | This fixes a couple of ecc strength values for which I earlier made conservative guesses, but whose correct values were later determined¹ (thanks Ivan). Also sets strength for fsl_ifc_nand, which was merged to mainline after the original patch that set the strength for all drivers. ¹ http://lists.infradead.org/pipermail/linux-mtd/2012-March/040325.html Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: ecc_strength is at ecc step granularityMike Dunn2012-05-131-1/+1
| | | | | | | | | | | | | ecc_strength element of mtd_info will be the strength of one ecc step, not of the entire writesize, as was previously planned. This is the appropriate way because, as was pointed out¹, bit errors in excess of the strength of one step can cause a hard error if they all occur within the same ecc region. ¹ http://lists.infradead.org/pipermail/linux-mtd/2012-March/040313.html Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: Add a NAND_CMD_STATUS when using write verificationBastian Hecht2012-05-131-0/+3
| | | | | | | | | | | To make sure the NAND chip is properly programmed we need a status command before each page write. When CONFIG_MTD_NAND_VERIFY_WRITE=y this assumption is broken when writing multiple pages consecutively. This patch fixes this. Signed-off-by: Bastian Hecht <hechtb@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: cmdlinepart: fix commentaryPeter Meerwald2012-05-131-1/+1
| | | | | | Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mxc_nand: fix several sparse warnings about incorrect address spaceUwe Kleine-König2012-05-131-11/+11
| | | | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mxc_nand: implement device tree probingUwe Kleine-König2012-05-131-19/+95
| | | | | | | | This is tested on i.MX27. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mxc_nand: put several more fields into devtype_dataUwe Kleine-König2012-05-131-36/+94
| | | | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mxc_nand: put callback for data correction into devtype structUwe Kleine-König2012-05-131-4/+6
| | | | | | | | This gets rid of one more nfc_is_vX(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mxc_nand: split chip_select function and put it into devtype structUwe Kleine-König2012-05-131-5/+28
| | | | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mxc_nand: put ecc layout into devtype structsUwe Kleine-König2012-05-131-11/+14
| | | | | | | | | This commit makes problems on v1 and v2 regarding 4KiBpages more obvious. As I don't have a 4KiB flash handy I just keep the status quo. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mxc_nand: split some functions to get rid of more nfc_is_vX()Uwe Kleine-König2012-05-131-29/+80
| | | | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mxc_nand: move function pointers to a per-SOC structUwe Kleine-König2012-05-131-66/+104
| | | | | | | | This prepares switching to platform ids and of-tree probing. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mxc_nand: use a flag to detect if the mx21 quirk is necessaryUwe Kleine-König2012-05-131-49/+49
| | | | | | | | This gets rid of several instances of cpu_is_mx21() in the driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mxc_nand: set owner field to prevent module unloading when in useUwe Kleine-König2012-05-131-0/+1
| | | | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: block2mtd: page_read() never returns NULLRyosuke Saito2012-05-131-6/+0
| | | | | | | | page_read() never returns NULL, so we can remove the NULL check here. Signed-off-by: Ryosuke Saito <raitosyo@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: bcm63xxpart: handle Broadcom partition orderJonas Gorski2012-05-131-11/+30
| | | | | | | | | | | | The original Broadcom partition order has the root fs in front of the kernel, which resulted in miscalculated partition sizes. Detect when such an image is on the flash and also reorder the partitions accordingly. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: omap: fix race condition in omap_wait()Ivan Djelic2012-05-131-1/+3
| | | | | | | | | | | | | | | If a context switch occurs in function omap_wait() just before the while loop is entered, then upon return from context switch the timeout may already have elapsed: in that case, status is never read from NAND device, and omap_wait() returns an error. This failure has been experimentally observed during stress tests. This patch ensures a NAND status read is always performed before returning, as in the generic nand_wait() function. Signed-off-by: Ivan Djelic <ivan.djelic@parrot.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: fsmc_nand: Add clk_{un}prepare() supportViresh Kumar2012-05-131-7/+7
| | | | | | | | | | | clk_{un}prepare is mandatory for platforms using common clock framework. Since this driver is used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for it. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: spear_smi: Add clk_{un}prepare() supportViresh Kumar2012-05-131-7/+7
| | | | | | | | | | | clk_{un}prepare is mandatory for platforms using common clock framework. Since this driver is used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for it. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: fix scb2_flash build when PCI is not enabledRandy Dunlap2012-05-131-1/+1
| | | | | | | | | | | | | scb2_flash.c is a PCI driver, but its build fails when CONFIG_PCI is not enabled, so make it depend on PCI. drivers/mtd/maps/scb2_flash.c:237:1: warning: data definition has no type or storage class drivers/mtd/maps/scb2_flash.c:237:1: warning: type defaults to 'int' in declaration of 'module_pci_driver' drivers/mtd/maps/scb2_flash.c:237:1: warning: parameter names (without types) in function declaration Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: omap2: fix resource leak in prefetch-busy pathGrazvydas Ignotas2012-05-131-1/+3
| | | | | | | | | If prefetch engine is busy, current code "forgets" to call dma_unmap_single(), which results in a deadlock later, so add it. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: print out the page size and oob size after parsing out the nandHuang Shijie2012-05-131-4/+5
| | | | | | | | | | | | | | | | Some not-supported nand chips may pass the current parsing code, and get the wrong page size and oob size. Sometimes, it's hard to notice that you get the wrong values, because there is no warning or error. So it's useful to print out the page size and oob size in the end of the parsing function. We can check these values with the datasheet of the nand chip as soon as possible. Artem: amend the print a bit Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: IFC NAND: Add support of ONFI NAND flashPrabhakar Kushwaha2012-05-131-6/+16
| | | | | | | | | | - Fix NAND_CMD_READID command for ONFI detect. - Add NAND_CMD_PARAM command to read the ONFI parameter page. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: lpddr: replace open-coded ARRAY_SIZE with macroJim Cromie2012-05-131-1/+1
| | | | | | Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: use module_pci_driverAxel Lin2012-05-136-75/+6
| | | | | | | | | This patch converts the drivers in drivers/mtd/* to use module_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: gpmi: do not include the mxs.hHuang Shijie2012-05-131-4/+5
| | | | | | | | | The mxs.h does not exit in the mx6q. So rewrite the __mxs_clrl()/__mxs_setl() and remove the mxs.h. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mark const init data with __initconst instead of __initdataUwe Kleine-König2012-05-131-1/+1
| | | | | | | | | | | | | | | As long as there is no other non-const variable marked __initdata in the same compilation unit it doesn't hurt. If there were one however compilation would fail with error: $variablename causes a section type conflict because a section containing const variables is marked read only and so cannot contain non-const variables. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: plat_nand: Add default partition parser to driverH Hartley Sweeten2012-05-131-2/+6
| | | | | | | | | Use cmdlinepart as the default partition parser and allow the arch setup code to still use their own partition parsers. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* Merge tag 'for-linus-3.4-20120513' of git://git.infradead.org/linux-mtdLinus Torvalds2012-05-132-12/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | Pull three MTD fixes from David Woodhouse: - Fix a lock ordering deadlock in JFFS2 - Fix an oops in the dataflash driver, triggered by a dummy call to test whether it has OTP functionality. - Fix request_mem_region() failure on amsdelta NAND driver. * tag 'for-linus-3.4-20120513' of git://git.infradead.org/linux-mtd: mtd: ams-delta: fix request_mem_region() failure jffs2: Fix lock acquisition order bug in gc path mtd: fix oops in dataflash driver
| * mtd: ams-delta: fix request_mem_region() failureJanusz Krzysztofik2012-05-081-11/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A call to request_mem_region() has been introduced in the omap-gpio driver recently (commit 96751fcbe5438e95514b025e9cee7a6d38038f40, "gpio/omap: Use devm_ API and add request_mem_region"). This change prevented the Amstrad Delta NAND driver, which was doing the same in order to take control over OMAP MPU I/O lines that the NAND device hangs off, from loading successfully. The I/O lines and corresponding registers used by the NAND driver are a subset of those used for the GPIO function. Then, to avoid run time collisions, all MPUIO GPIO lines should be marked as requested while initializing the NAND driver, and vice versa, a single MPUIO GPIO line already requested before the NAND driver initialization is attempted should prevent the NAND device from being started successfully. There is another driver, omap-keypad, which also manipulates MPUIO registers, but has never been calling request_mem_region() on startup, so it's not affected by the change in the gpio-omap and works correctly. It uses the depreciated omap_read/write functions for accessing MPUIO registers. Unlike the NAND driver, these I/O lines and registers are separate from those used by the GPIO driver. However, both register sets are non-contiguous and overlapping, so it would be impractical to request the two sets separately, one from the gpio-omap, the other form the omap-keypad driver. In order to solve all these issues correctly, a solution first suggested by Artem Bityutskiy, then closer specified by Tony Lindgren while they commented the initial version of this fix, should be implemented. The gpio-omap driver should export a few functions which would allow the other two drivers to access MPUIO registers in a safe manner instead of trying to manage them in parallel to the GPIO driver. However, such a big change, affecting 3 drivers all together, is not suitable for the rc cycle, and should be prepared for the merge window. Then, an alternative solution is proposed as a regression fix. For the ams-delta NAND driver to initialize correctly in coexistence with the changed GPIO driver, drop the request_mem_region() call from the former, especially as this call is going to be removed while the long-term solution is implemented. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * mtd: fix oops in dataflash driverWill Newton2012-05-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I'm seeing an oops in mtd_dataflash.c with Linux 3.3. What appears to be happening is that otp_select_filemode calls mtd_read_fact_prot_reg with -1 for offset and length and a NULL buffer to test if OTP operations are supported. This finds its way down to otp_read in mtd_dataflash.c and causes an oops when memcpying the returned data into the NULL buf. None of the checks in otp_read catches the negative length and offset. Changing the length of the dummy read to 0 prevents the oops. Cc: stable@kernel.org [3.3+] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2012-04-261-0/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | Pull [GIT PULL] slave-dmaengine fixes from Vinod Koul. * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine/amba-pl08x : reset phychan_hold on terminate all dma: pl330: fix a couple of compilation warnings dma/ste_dma40: fix erroneous comparison dma/ste_dma40: explicitly include regulator consumer header dma40: Improve the logic of stopping logical chan dmaengine: at_hdmac: remove clear-on-read in atc_dostart() dma: mxs-dma: enable channel in device_issue_pending call dmaengine: imx-dma: dont complete descriptor for cyclic dma
| * dma: mxs-dma: enable channel in device_issue_pending callShawn Guo2012-04-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable channel in device_issue_pending call, so that the order between cookie assignment and channel enabling can be ensured naturally. It fixes the mxs gpmi-nand breakage which is caused by the incorrect order of cookie assigning and channel enabling. Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Huang Shijie <b32955@freescale.com> Tested-by <samgandhi9@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
* | fix breakage in mtdchar_open(), sanitize failure exitsAl Viro2012-04-091-10/+10
| | | | | | | | | | | | simple_release_fs() should be only done on failure there. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds2012-04-051-9/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA
| * simple_open: automatically convert to simple_open()Stephen Boyd2012-04-051-9/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
View Lorry Controller Status