summaryrefslogtreecommitdiff
path: root/drivers/net/smc91x.h
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] smc91x: allow for dynamic bus access configsNicolas Pitre2006-03-211-191/+283
| | | | | | | | | | | | | | All accessor's different methods are now selected with C code and unused ones statically optimized away at compile time instead of being selected with #if's and #ifdef's. This has many advantages such as allowing the compiler to validate the syntax of the whole code, making it cleaner and easier to understand, and ultimately allowing people to define configuration symbols in terms of variables if they really want to dynamically support multiple bus configurations at the same time (with the unavoidable performance cost). Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] IRQ type flagsRussell King2006-01-081-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some ARM platforms have the ability to program the interrupt controller to detect various interrupt edges and/or levels. For some platforms, this is critical to setup correctly, particularly those which the setting is dependent on the device. Currently, ARM drivers do (eg) the following: err = request_irq(irq, ...); set_irq_type(irq, IRQT_RISING); However, if the interrupt has previously been programmed to be level sensitive (for whatever reason) then this will cause an interrupt storm. Hence, if we combine set_irq_type() with request_irq(), we can then safely set the type prior to unmasking the interrupt. The unfortunate problem is that in order to support this, these flags need to be visible outside of the ARM architecture - drivers such as smc91x need these flags and they're cross-architecture. Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the property that the device would like. The IRQ controller code should do its best to select the most appropriate supported mode. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ARM] Use correct IO operations for PlebRussell King2005-11-121-8/+8
| | | | | | | Use read/write IO operations rather than in/out, as per other SA1100 platforms. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] smc91x: DB1200 support.Pete Popov2005-11-111-0/+32
| | | | | | | The following patch support the SMC9111 present on DB1200 boards. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] m32r: SMC91x driver updateHirokazu Takata2005-10-301-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | Update SMC91x driver for m32r. - Remove needless NONCACHE_OFFSET adjustment. > [PATCH 2.6.14-rc4] m32r: NONCACHE_OFFSET in _port2addr > Change _port2addr() not to add NONCACHE_OFFSET. > Adding NONCACHE_OFFSET requires needless address adjusting by a driver > using ioremap() like a SMC91x driver. - Fix lots of warnings as following: /usr/src/ctest/git/kernel/drivers/net/smc91x.c: In function `smc_reset': /usr/src/ctest/git/kernel/drivers/net/smc91x.c:324: warning: passing arg 2 of `_outw' makes integer from pointer without a cast /usr/src/ctest/git/kernel/drivers/net/smc91x.c:325: warning: passing arg 2 of `_outw' makes integer from pointer without a cast /usr/src/ctest/git/kernel/drivers/net/smc91x.c:341: warning: passing arg 2 of `_outw' makes integer from pointer without a cast /usr/src/ctest/git/kernel/drivers/net/smc91x.c:342: warning: passing arg 2 of `_outw' makes integer from pointer without a cast : /usr/src/ctest/git/kernel/drivers/net/smc91x.c:1915: warning: passing arg 1 of `_inw' makes integer from pointer without a cast /usr/src/ctest/git/kernel/drivers/net/smc91x.c:1915: warning: passing arg 1 of `_inw' makes integer from pointer without a cast Signed-off-by: Hayato Fujiwara <fujiwara@linux-m32r.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] bogus #if (smc91x.h)viro@ZenIV.linux.org.uk2005-09-071-1/+1
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Fix OMAP specific typo in smc91x.hTony Lindgren2005-07-311-1/+1
| | | | | | | | | | | | | | | | | | | --ReaqsoxgOBHFXBhH Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hi Jeff, Here's a little patch fixing a typo in smc91x.h. Regards, Tony --ReaqsoxgOBHFXBhH Content-Type: text/x-chdr; charset=us-ascii Content-Disposition: inline; filename="patch-fix-typo-smc91x.h" Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] smc91x needs settable IRQ trigger typeDavid Brownell2005-06-271-0/+13
| | | | | | | | | For boards that invert the SMC91x IRQ line (maybe an FPGA inverts it), the set_irq_type() call can't assume IRQT_RISING. These particular boards currently use OMAP-specific calls to change the trigger type, but the boards break when set_irq_type() stops being a NOP. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* [PATCH] smc91x: improve diagnostic infoNicolas Pitre2005-05-271-8/+1
| | | | | | | | | ... and remove duplicate status defines. Signed-off-by: Nicolas Pitre <nico@cam.org> Index: linux-2.6/drivers/net/smc91x.c ===================================================================
* [PATCH] smc91x warning fixNicolas Pitre2005-05-121-3/+3
| | | | | | | A few IO addr type conversions were missing. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-161-0/+1032
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
View Lorry Controller Status