summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/hw.h
Commit message (Collapse)AuthorAgeFilesLines
* ath9k: fix BE/BK queue orderFelix Fietkau2015-01-161-2/+2
| | | | | | | | | | | | commit 78063d81d353e10cbdd279c490593113b8fdae1c upstream. Hardware queues are ordered by priority. Use queue index 0 for BK, which has lower priority than BE. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ath9k: fix getting tx duration for dynackFelix Fietkau2014-09-301-0/+1
| | | | | | | | | | | | On AR9003, tx control and tx status are in separate descriptor rings. Tx duration is extracted from the tx control descriptor data, which ar9003_hw_proc_txdesc cannot access. Fix getting the duration by adding a separate callback for it. Acked-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: add dynamic ACK timeout estimationLorenzo Bianconi2014-09-161-0/+3
| | | | | | | | | Add dynamic ACK timeout estimation algorithm based on ACK frame RX timestamp, TX frame timestamp and frame duration. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Tested-by: Philippe Duchein <wireless-dev@duchein.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: export methods related to ACK timeout estimationLorenzo Bianconi2014-09-161-0/+4
| | | | | | | | | Remove static keyword and export ath9k_hw_setslottime(), ath9k_hw_set_ack_timeout() and ath9k_hw_set_cts_timeout() in hw.h. These methods will be used in ACK timeout estimation algorithm (dynack) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: save tsf in channel contextFelix Fietkau2014-06-191-0/+1
| | | | | | | | Save TSF in channel context for multiple operating channels. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix RX interrupt mitigationSujith Manoharan2014-01-231-0/+2
| | | | | | | | The threshold values for RX interrupt mitigation are different for AR9003 and AR9002 families. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Assign macVersion for QCA9531Sujith Manoharan2014-01-031-0/+1
| | | | | Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Remove unused config option ack_6mbSujith Manoharan2014-01-031-1/+0
| | | | | Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Identify baseband watchdog signaturesSujith Manoharan2014-01-031-0/+1
| | | | | | | | | | | | A full HW reset is not required for all baseband watchdog signatures. Some BB watchdog updates are benign and can be discarded, some require re-programming of certain registers and others require a chip reset. This patch adds a routine to identify such signatures. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Add HW callbacks for MAC/BB hang checksSujith Manoharan2014-01-031-0/+3
| | | | | | | | This is required for adding separate hang check routines for AR9002 and AR9003. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Register supported HW hang checksSujith Manoharan2014-01-031-5/+17
| | | | | | | HW hang checks have to be done on a per-chip basis. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: move ath9k_debug_sync_cause out of ath9k_hwFelix Fietkau2013-12-191-8/+2
| | | | | | | ath9k_hw should not depend on any ath9k data structures like ath_softc Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: clean up station beacon timer APIFelix Fietkau2013-12-181-5/+1
| | | | | | | | Remove unused fields, pass timer info in usec instead of TU. Preparation for fixing nexttbtt calculation Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: remove spur related unused definesFelix Fietkau2013-12-181-2/+0
| | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: remove additional_swba_backoffFelix Fietkau2013-12-181-1/+0
| | | | | | | It is unused Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: simplify spur channel handlingFelix Fietkau2013-12-181-5/+0
| | | | | | | | Remove ah->config.spurmode and ah->config.spurchans, always use EEPROM data. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: remove ah->config.pcie_clock_reqFelix Fietkau2013-12-181-1/+0
| | | | | | | It is unused Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: remove defunct ad-hoc mode ATIM window handling codeFelix Fietkau2013-12-181-1/+0
| | | | | | | | | The hardware does not have support for ATIM processing, and the driver does not set up ah->atim_window anywhere. Additionally, the code can clobber the timer used by P2P powersave. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: clean up generic timer codeFelix Fietkau2013-12-181-11/+1
| | | | | | | | | | - Use generic bitops instead of custom hackery - Move interrupt enable/disable logic from ath9k to ath9k_hw - Decouple ISR call from btcoex - Make the overflow callback optional (to prevent IRQ storms) Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Use a separate TX gain table for WZR-HP-G450HSujith Manoharan2013-12-091-0/+1
| | | | | | | | | | | | | | | | | | | | The Buffalo device WZR-HP-G450H uses the index 3 for TX gain, which is set to the high_power table currently. Later variants of the router use the same index, but instead refer to the low_ob_db gain table. This is not handled in the driver since there is no way to distinguish board revisions and the high_power table is used (incorrectly) for the newer variants. By default, devices based on AR9300 using the TX gain index 3 have to use the high_power table. To make sure that WZR-HP-G450H is not broken when the high_power table is updated, use a separate array based on information obtained from the platform data. The current situation where only the original variant of WZR-HP-G450H works properly stays unchanged. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Initialize baseband for DFS channelsSujith Manoharan2013-12-091-0/+1
| | | | | | | | | | Certain baseband registers require different values to be programmed when operating in a DFS channel to ensure that radar detection works correctly. This is required for AR9300, AR9340 and AR9580. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Remove pcieSerDesWriteSujith Manoharan2013-12-021-1/+0
| | | | | | | This HW config option is always set to true and is not needed. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Use CONFIG_ATH9K_WOWSujith Manoharan2013-12-021-2/+2
| | | | | | | | Move the WoW code to wow.c and compile it conditionally based on CONFIG_ATH9K_WOW. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Use correct PCIE initvals for AR9485Sujith Manoharan2013-11-111-0/+1
| | | | | | | | | | | | | | | | | Currently, the PLL is turned off for AR9485 when switching to a low power state, but AR9485 has an issue where the card will become unresponsive if left idle for a long time without any traffic. To fix this, force the PLL to always be on using a different initval array, ar9485_1_1_pll_on_cdr_on_clkreq_disable_L1. This is done for most of the AR9485 based cards like HB125, WB225 etc. but certain models require the feature to be turned off. Identify such cards and use default values for them. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: add TX99 supportLuis R. Rodriguez2013-10-181-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TX99 support enables Specific Absorption Rate (SAR) testing. SAR is the unit of measurement for the amount of radio frequency(RF) absorbed by the body when using a wireless device. The RF exposure limits used are expressed in the terms of SAR, which is a measure of the electric and magnetic field strength and power density for transmitters operating at frequencies from 300 kHz to 100 GHz. Regulatory bodies around the world require that wireless device be evaluated to meet the RF exposure limits set forth in the governmental SAR regulations. In the examples below, for more bit rate options see the iw TX bitrate setting documentation: http://wireless.kernel.org/en/users/Documentation/iw#Modifying_transmit_bitrates Example usage: iw phy phy0 interface add moni0 type monitor ip link set dev moni0 up iw dev moni0 set channel 36 HT40+ iw set bitrates mcs-5 4 echo 10 > /sys/kernel/debug/ieee80211/phy0/ath9k/tx99_power echo 1 > /sys/kernel/debug/ieee80211/phy0/ath9k/tx99 Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: remove references to hw->confFelix Fietkau2013-10-141-1/+1
| | | | | | | | Accessing it to get the current operating channel is racy and in the way of further channel handling related changes Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: simplify channel flagsFelix Fietkau2013-10-141-55/+25
| | | | | | | | There was some duplication between channelFlags and chanmode, as well as a lot of redundant checks based on the combinations of flags. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: remove IS_CHAN_OFDM()Felix Fietkau2013-10-141-1/+0
| | | | | | | The hardware is always configured with OFDM support enabled Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: remove IS_CHAN_B()Felix Fietkau2013-10-141-1/+0
| | | | | | | | | Hardware 802.11b-only mode isn't supported by the driver (the device is configured for 802.11n/g instead). Simplify the code by removing checks for it. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: remove direct accesses to channel mode flagsFelix Fietkau2013-10-141-0/+2
| | | | | | | | Use wrappers where available. Simplifies code and helps with further improvements to the channel data structure Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix PeakDetect calibration for AR9462Sujith Manoharan2013-09-261-0/+2
| | | | | | | | | | | | | | | Since HW PeakDetect calibration is turned on for AR9462, various conditions have to be handled in the driver: * Enable agc_cal when loading RTT fails. * Disable SW PeakDetect calibration when RTT calibration is not enabled. * Keep SW PeakDetect calibration result in driver. * Update RTT table according to the saved value. * Write RTT back after modifying SW RTT table. * Enable local mode for PeakDetect calibration and restore values. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Use bitops for calibration flagsSujith Manoharan2013-09-261-7/+11
| | | | | Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Handle abnormal NAV in AP modeSujith Manoharan2013-09-261-0/+1
| | | | | | | | | Beacon transmission would get stuck if the NAV is an invalid value for some reason. Check and correct the NAV value in the HW when this happens. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: replace snprintf() with scnprintf()Zefir Kurtisi2013-09-261-2/+2
| | | | | | | | | | | | Whenever the return value of snprintf() is used to calculate remaining buffer-space, we wanted to use sncprintf() instead. Indentation is adapted where possible. Some lines exceed the line width limit, either they did it already before, or since they can not be broken reasonably well. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Add support for AR9565 v1.0.1 LNA diversitySujith Manoharan2013-09-261-0/+1
| | | | | Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix ASPM for AR9462Sujith Manoharan2013-08-261-0/+1
| | | | | | | | | | If the L1 entrance latency is not calibrated properly in the EEPROM in WB222 boards, there could be problems in connectivity. Check and correct the calibrated value if it doesn't match the optimal value for WB222, 4us. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Add antenna diversity tweak for CUS198Sujith Manoharan2013-08-221-0/+1
| | | | | | | This improves RX diversity and performance for AR9485. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix build failureSujith Manoharan2013-08-091-1/+4
| | | | | | | | | | Make sure that CONFIG_ATH9K_BTCOEX_SUPPORT is used for the WLAN/BT RX diversity hooks. Reported by the kernel build testing backend. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Set SWCOM value for CUS198Sujith Manoharan2013-08-051-0/+1
| | | | | | | | | CUS198/CUS230 cards require a custom value to be programmed into the SWCOM register. Assign this during init time. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Remove "shared_chain_lnadiv"Sujith Manoharan2013-08-051-1/+0
| | | | | | | | | This variable is redundant since we can use common->bt_ant_diversity to determine if diversity has to be enabled/disabled. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Rename ath9k_hw_antctrl_shared_chain_lnadivSujith Manoharan2013-08-051-1/+1
| | | | | | | Use "ath9k_hw_set_bt_ant_diversity" instead. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Add a HW capability for WLAN/BT RX diversitySujith Manoharan2013-08-051-0/+1
| | | | | | | | | Make use of this capability to restrict the usage of the debugfs file and modparam using which this feature can be enabled. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Add a HW flag for FCCSujith Manoharan2013-07-221-0/+1
| | | | | | | | | Fast Channel Change across 2G/5G bands is supported only by AR9462 and AR9565. Add a HW capability field to indicate this. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Program initvals for CUS217Sujith Manoharan2013-06-181-0/+2
| | | | | Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Add support for 5G-XLNA/AR9462Sujith Manoharan2013-06-181-0/+1
| | | | | Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Add custom parameters for CUS198Sujith Manoharan2013-06-141-0/+4
| | | | | | | | | | | | | | CUS198 is a card based on AR9485. There are differences between the base reference design HB125 and CUS198. Identify such cards based on the PCI subsystem IDs and set HW parameters appropriately. Addresses this bug - https://bugzilla.kernel.org/show_bug.cgi?id=49201 Cc: jkp@iki.fi Cc: gfmichaud@gmail.com Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Do not maintain ANI state per-channelSujith Manoharan2013-06-031-1/+1
| | | | | | | | | ANI state can be maintained globally instead of per-channel. This reduces memory usage and since default values are used during a scan run, per-channel state is not required. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Simplify ANI initializationSujith Manoharan2013-06-031-2/+0
| | | | | | | | | The check "enable_ani" is not required since it is always set to true and the logic for disabling/enabling ANI via debugfs is done at a higher layer. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Enable WoW only for AR9462Sujith Manoharan2013-06-031-8/+1
| | | | | | | | | The only card with which WoW has been tested and verified is AR9462. Do not enable it for all cards since WoW is really quirky and needs to be tested properly with each chip. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_hw: make various ar5416/ar91xx rf banks constFelix Fietkau2013-04-101-10/+0
| | | | | | | Banks 0-3,7 are neither modified at run time, nor SREV dependent. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
View Lorry Controller Status