summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl-6000.c
Commit message (Collapse)AuthorAgeFilesLines
* iwlwifi: rework broadcast station managementJohannes Berg2010-05-101-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the broadcast station is managed along with the interface type, rather than always being present. That leads to a bug with injection -- it is currently not possible to inject frames when the only virtual interface is a monitor, because in that the required broadcast station is missing. Additionally, allocating and deallocating the broadcast station's LQ all the time is wasteful, and the code to support this is fairly complex. So this changes completely the way we manage the broadcast station. Rather than manage it along with any interface, we now allocate it when we bring the device up, and remove it again when we bring the device down. When we bring the device up, we don't immediately program the broadcast station into it, instead we just mark it active and rely on the next restore cycle to upload it to the device. This works because an unassociated RXON is always required at least once to set up device parameters, which implies a reprogramming of stations into the device. As we now manage all stations properly, there no longer is a need for forcing a clearing of them via iwl_clear_ucode_stations(), which can become a lot simpler. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* iwlwifi: remove ucode virtual functionsJohannes Berg2010-05-101-2/+0
| | | | | | | | | | | | | AGN devices all use the same ucode operations, except for 4965, because 4965 uses only v1 file headers. Therefore, we can remove all the indirection we have here and just code the API distinction in place, with a small special case for 4965. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* iwlwifi: manage IBSS station properlyJohannes Berg2010-05-101-0/+2
| | | | | | | | | | | | | | Currently iwlwifi will eventually exhaust the station table when adding the BSSID station for IBSS mode, unless the interface is set down. The new mac80211 ibss joined/left notification allows us to fix that easily by moving the code to add the IBSS station to the notification, and also adding code to remove it again when we leave the IBSS. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* iwlwifi: use cfg to configure calibration operationWey-Yi Guy2010-05-101-0/+14
| | | | | | | | | sensitivity calibration and chain noise calibration are not available for all the devices; use .cfg to configure the availability of those calibration functions Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* iwlwifi: use .cfg to enable/disable continuous ucode traceWey-Yi Guy2010-05-101-0/+7
| | | | | | | | | Instead of checking device type for enable/disable continuous ucode trace function; put it in .cfg for better control and more flexibilities. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* iwlwifi: rename 6000 series Gen2 devices to Gen2aShanyu Zhao2010-05-101-11/+13
| | | | | | | | | | Rename the current 6000 series Gen2 devices to Gen2a. Rename the ucode name prefix to iwlwifi-6000g2a. Also corrected the device IDs for Gen2a series devices. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* iwlwifi: greenfield support only true for 11n devicesWey-Yi Guy2010-04-301-3/+0
| | | | | | | | Greenfield is a 11n feature, remove it from non-11n devices configuration parameters list Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* iwlwifi: set hw parameters based on device typeWey-Yi Guy2010-04-301-19/+51
| | | | | | | | | | Separate the hw_set_hw_params() function to per device based; different devices can have different hardware parameters set, when separate the function based on device type can avoid mistakes, give more flexibilities and easier to read. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* iwlwifi: PA type for 6000g2 seriesWey-Yi Guy2010-04-161-2/+2
| | | | | | | | | For 6000g2 series of NICs, PA type is determined by uCode, driver do not have to set the register for internal/external PA. It is a workaround just for 6000 series NICs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* iwlwifi: add debugfs ops to iwlwifiAbhijeet Kolekar2010-04-161-0/+11
| | | | | | | | Seperate debugfs functions into iwlagn specific debugfs file and Add debugfs ops to iwlwifi. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* iwlwifi: bring up 6000 Series 2x2 AGN Gen2 adaptersShanyu Zhao2010-04-161-7/+13
| | | | | | | | | | | This patch is to bring up 6000 Series 2x2 AGN Gen2 adapters. Seperate various version numbers from 6000 Series definitions; Add module firmware declaration for the new adapters; Add additional device IDs and subsystem IDs; Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* Merge branch 'wireless-2.6' into wireless-next-2.6Reinette Chatre2010-04-161-2/+2
|\ | | | | | | | | Conflicts: drivers/net/wireless/iwlwifi/iwl-6000.c
| * iwlwifi: correct 6000 EEPROM regulatory addressShanyu Zhao2010-04-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For 6000 series, the 2.4G HT40 band regulatory settings address in EEPROM was off by 2. Before the fix, you'll see this in dmesg: [79535.788877] ieee80211 phy8: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] WIDE (0x61 0dBm): Ad-Hoc not supported [79535.788880] ieee80211 phy8: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] WIDE (0x61 0dBm): Ad-Hoc not supported And after the fix: [91132.688706] ieee80211 phy14: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported [91132.688709] ieee80211 phy14: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* | iwlwifi: default max event log sizeWey-Yi Guy2010-04-091-0/+7
| | | | | | | | | | | | | | | | | | Size of event log is determined by uCode which is different per NICs. Set the maximum event log size per device to better match uCode configuration. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* | iwlwifi: enable '6000 Series 2x2 AGN Gen2' adaptorsJay Sternberg2010-03-251-0/+34
| | | | | | | | | | Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* | iwlwifi: move agn module parameter structure to common placeWey-Yi Guy2010-03-251-6/+6
| | | | | | | | | | | | | | | | agn module parameter data structure shared by all agn devices, move it iwl-agn-lib.c file. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* | iwlwifi: each device has its own eeprom tx power versionWey-Yi Guy2010-03-251-6/+6
| | | | | | | | | | | | | | | | Each device has it own eeprom, so the tx power version could be different, define TX_POWER_VERSION per device. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* | iwlwifi: move agn common code to iwlagn library fileWey-Yi Guy2010-03-251-28/+28
| | | | | | | | | | | | | | | | Multiple iwlagn based devices share the same common functions. Move those functions from iwl-5000.c to iwl-agn-lib.c file. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* | iwlwifi: move ucode alive related code to separate fileWey-Yi Guy2010-03-251-4/+4
| | | | | | | | | | | | | | | | uCode alive for iwlagn based devices share the same functions. Move those functions from iwl-5000.c to iwl-agn-ucode.c. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* | iwlwifi: move hw related defines to separate fileWey-Yi Guy2010-03-251-15/+15
| | | | | | | | | | | | | | | | | | Multiple iwlagn based devices shared the same hw definitions. Move device hardware related defines from iwl-5000-hw.h to iwl-agn-hw.h file. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* | iwlwifi: move tx queue related code to separate fileWey-Yi Guy2010-03-251-10/+10
| | | | | | | | | | | | | | | | Multiple iwlagn based devices shared the same tansmit queue functions. Move tx queue related code from iwl-5000.c to iwl-agn-tx.c file. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* | iwlwifi: move hcmd related code to separate fileWey-Yi Guy2010-03-251-4/+4
| | | | | | | | | | | | | | | | Multiple iwlagn based devices shared the same hcmd related functions. Move from iwl-5000.c to iwl-agn-hcmd.c file. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* | iwlwifi: code cleanup for "load ucode" functionWey-Yi Guy2010-03-251-2/+2
| | | | | | | | | | | | | | | | | | Loading uCode functions are shared across multiple agn devices. Move those functions to iwl-agn-ucode.c file with other uCode related functions. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* | iwlwifi: move ucode loading related code to separated fileWey-Yi Guy2010-03-251-2/+2
| | | | | | | | | | | | | | | | Multiple iwlagn based devices shared the same ucode loading procedure. Move loading related code from iwl-5000.c to iwl-agn-ucode.c file. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* | iwlwifi: code cleanup for connectivity recoveryWey-Yi Guy2010-03-191-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Split the connectivity check and recovery routine into separated functions based on the types 1. iwl_good_ack_health() - check for ack count 2. iwl_good_plcp_health() - check for plcp error Based on the type of errors being detected, different recovery methods will be used to bring the system back to normal operational state. Because different NIC has different HW and uCode, the behavior is also different; these functions thus now form part of the ops infrastructure, so we can have more control on how to monitor and recover from error condition case per device. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* | iwlwifi: move plcp check to separated functionWey-Yi Guy2010-03-191-0/+2
| | | | | | | | | | | | | | | | | | Move the plcp error checking into stand alone function and pointed by ops to accommodate devices not needing this recovery. Signed-off-by: Trieu 'Andrew' Nguyen <trieux.t.nguyen@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* | iwlwifi: Recover TX flow stall due to stuck queueWey-Yi Guy2010-03-191-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Monitors the internal TX queues periodically. When a queue is stuck for some unknown conditions causing the throughput to drop and the transfer is stop, the driver will force firmware reload and bring the system back to normal operational state. The iwlwifi devices behave differently in this regard so this feature is made part of the ops infrastructure so we can have more control on how to monitor and recover from tx queue stall case per device. Signed-off-by: Trieu 'Andrew' Nguyen <trieux.t.nguyen@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* | iwlwifi: clean up driver names for 1000/5000/6000Shanyu Zhao2010-03-191-6/+6
| | | | | | | | | | | | | | | | | | Align the driver names with official product names for 1000/5000/6000 series. This change mainly affects the debug messages show up in system log. No functional changes. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* | iwlagn: move ICT code into separate fileJohannes Berg2010-03-091-0/+1
|/ | | | | | | | | | | | All the ICT ISR code is iwlagn specific, and doesn't need to be in iwlcore. So create a new iwl-agn.h header file that will hold agn specific function declarations etc., and move the ICT code into a new iwl-agn-ict.c file that is linked into iwlagn. This also gets rid of exporting those symbols. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* iwlwifi: indicate calib version for 6050 seriesAbhijeet Kolekar2010-02-191-2/+77
| | | | | | | | Indicate calibration version to uCode Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: Add chain_noise support for 6050Ben Cahill2010-02-081-17/+2
| | | | | | | | | | | | Existing iwl6050_ops->iwl6050_hcmd_utils structure had no pointers to chain noise functions (gain_computation and chain_noise_reset). As it turns out, by adding chain_noise_scale (see related patch), there is no need for separate chain noise function, so simply use iwl6000_ops->iwl5000_hcmd_utils, and remove those for 6050. Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: Add chain noise scaling factorBen Cahill2010-02-081-0/+6
| | | | | | | | | | | 6x50 device requires a different scaling factor for Rx gain values sent to device via PHY_CALIBRATION_CMD (CHAIN_NOISE_GAIN_CMD). Rather than create a new iwlXXXX_gain_computation() function, add new chain_noise_scale member to struct iwl_cfg, and keep using iwl5000_gain_computation(). Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: update sensitivity calibration data for 6x00 seriesWey-Yi Guy2010-01-291-1/+1
| | | | | | | Update sensitivity range values for 6000 & 6x50 series Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* iwlwifi: make broadcast station addition genericReinette Chatre2010-01-251-0/+1
| | | | | | | | | | | | | | | | | | Add function pointer for broadcast station addition so that we can call it in from iwlcore at a later time. We only distinguish between iwlagn and iwl3945 broadcast station addition. For the iwl3945 station addition we add that function to iwlcore since that is where most station functionality resides, making it part of iwl3945 will require significant code reorganization that will dilute station management functionality. This seems to be an efficient solution. It may seem as though we are removing error checking when adding the 3945 broadcast station but this error checking was never really necessary since the function returns the station id and the broadcast station id is always set. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: enable DC calibrationAbhijeet Kolekar2010-01-251-1/+15
| | | | | | | | | | | | From: Abhijeet Kolekar <abhijeet.kolekar@intel.com> For 6X50 DC calibration needs to be initialized else uCode will run an endless loop. Enbale DC calibration in hw config. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: Tune radio to prevent unexpected behaviorTrieu 'Andrew' Nguyen2010-01-251-0/+6
| | | | | | | | | | | | | | | | | | We have seen the throughput dropped due to external noisy environment and the radio is out of tune. There are lot of plcp errors indicating this condition. Eventually the station can get de-authenticated by the Access Point. By resetting and tuning the radio, the plcp errors are reduced or eliminated and the throughput starts to rise. To prevent unexpected behavior such as drop in throughput or deauthentication, - The change provides the driver feature to monitor and tune the radio base on the statistics notification from the uCode. - It also allows the setting of the plcp error rate threshold via the plcp_delta under debugfs interface. Signed-off-by: Trieu 'Andrew' Nguyen <trieux.t.nguyen@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: update copyright year to 2010Reinette Chatre2010-01-191-1/+1
| | | | | Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: display flowhandler register when sw error or on-demandWey-Yi Guy2010-01-191-0/+1
| | | | | | | | | | | | Flowhandler handle the communication between driver and uCode, when any uCode error happen, we also like to know what is the status of the flowhandler; it can help to debug flowhandler related problem. Also adding debugfs file to dump current value of flowhandler registers. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: Constify struct iwl_opsEmese Revfy2009-12-221-2/+2
| | | | | Signed-off-by: Emese Revfy <re.emese@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: use new mac80211 SMPSJohannes Berg2009-12-221-3/+0
| | | | | | | | | | Instead of hard-coding the SM PS mode per hardware, this makes iwlwifi support the new mac80211 API for controlling the SM PS mode. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: dump "Control and Status Register" when detect uCode HW/SW errorWey-Yi Guy2009-12-211-0/+1
| | | | | | | | | | | When uCode HW/SW error detected, dumping important CSR (Control and Status Registers) values. Also add "csr" debugfs file to dump the current values of CSR defined in CSR table to syslog. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: set sm_ps_mode as part of cfg parametersWey-Yi Guy2009-11-231-1/+3
| | | | | | | | | | | | | Setting "Spatial multiplexing Power Save" as part of per device configuration parameter. Report to uCode based on priv->conf setting, so driver can have more control of how different devices should operate in power save mode. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: drop non-production PCI-IDs for 6x50 seriesWey-Yi Guy2009-11-181-32/+0
| | | | | | | | drop the non-production PCI-IDs for 6x50 series Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: disable coex until implementation ready for 6x50Wey-Yi Guy2009-11-181-2/+0
| | | | | | | | | Temporary disable the coex function for wifi/wimax for 6x50 series until the full implementation ready. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: drop non-production PCI-IDsWey-Yi Guy2009-11-111-97/+1
| | | | | | | | Remove the support for all the PCI_IDs never make into production Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: fix for channel switchWey-Yi Guy2009-11-111-2/+4
| | | | | | | | | | | | | | | Different channel has different configuration, need to pass correct configuration to uCode when send "channel switch" command to uCode. Invalid configuration will cause sysassert in uCode and produce un-expected result. Even it is a very small windows, but we also need to consider and handle the case if commit_rxon occurred before the "channel switch announcement" notification received from uCode. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: no periodic Tx/IQ calibration for 6x00/6x50 seriesWey-Yi Guy2009-11-111-2/+0
| | | | | | | | | | For both 6x00 and 6x50 series devices, periodic Tx IQ calibration is disabled in uCode, driver do not need to set the periodic Tx/IQ calibration bit in calibration command. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: add wimax/wifi coexist support for 6x50 seriesWey-Yi Guy2009-11-021-0/+3
| | | | | | | | | | | | | | | For 6x50 series, it is wimax/wifi combo device, so driver need to enable the wimax/wifi co-exist function and send the coexist event priority table to uCode for operation. The priority table will be used by uCode to determine what is the proper action it should take when co-exist with WiMAX. For example, when WiFi runs a scan, it must own radio exclusively, therefore will disconnect WiMAX if WiMAX is connected. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: add SM PS support for 6x50 seriesWey-Yi Guy2009-11-021-0/+2
| | | | | | | | | | | | | Spatial Multiplexing Power Save was disabled to achieve better throughput while in power save mode by activating all the rx chains all the time. By doing so, the device power consumption is high. Enable static/dynamic spatial multiplexing power save if device support it, which can lower the power consumption without impact throughput. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: invoke L0S workaround for 6000/1000 seriesBen Cahill2009-11-021-10/+10
| | | | | | | | | | | | Invoke workaround to avoid instability in L0->L0S->L1 transition on PCIe bus. Workaround disables L0S state so device moves directly from L0->L1. Workaround needed on all devices since and including 4965; add to 6000/1000. Describe bug and workaround better in comments. Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
View Lorry Controller Status