summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
Commit message (Collapse)AuthorAgeFilesLines
* mwifiex: Call pci_release_region after calling pci_disable_deviceYogesh Ashok Powar2013-05-131-1/+1
| | | | | | | | | | | | | | | | | commit 5b0d9b218b74042ff72bf4bfda6eeb2e4bf98397 upstream. "drivers should call pci_release_region() AFTER calling pci_disable_device()" Please refer section 3.2 Request MMIO/IOP resources in Documentation/PCI/pci.txt Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* mwifiex: Use pci_release_region() instead of a pci_release_regions()Yogesh Ashok Powar2013-05-131-2/+2
| | | | | | | | | | | | | | | commit c380aafb77b7435d010698fe3ca6d3e1cd745fde upstream. PCI regions are associated with the device using pci_request_region() call. Hence use pci_release_region() instead of pci_release_regions(). Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* iwlwifi: dvm: don't send zeroed LQ cmdEmmanuel Grumbach2013-05-131-1/+4
| | | | | | | | | | | | | | | | | commit 63b77bf489881747c5118476918cc8c29378ee63 upstream. When the stations are being restored because of unassoc RXON, the LQ cmd may not have been initialized because it is initialized only after association. Sending zeroed LQ_CMD makes the fw unhappy: it raises SYSASSERT_2078. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> [move zero_lq and make static const] Signed-off-by: Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ath9k_hw: change AR9580 initvals to fix a stability issueFelix Fietkau2013-04-251-1/+1
| | | | | | | | | | | | | commit f09a878511997c25a76bf111a32f6b8345a701a5 upstream. The hardware parsing of Control Wrapper Frames needs to be disabled, as it has been causing spurious decryption error reports. The initvals for other chips have been updated to disable it, but AR9580 was left out for some reason. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ath9k_htc: accept 1.x firmware newer than 1.3Felix Fietkau2013-04-251-1/+1
| | | | | | | | | | | | commit 319e7bd96aca64a478f3aad40711c928405b8b77 upstream. Since the firmware has been open sourced, the minor version has been bumped to 1.4 and the API/ABI will stay compatible across further 1.x releases. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* rt2x00: rt2x00pci_regbusy_read() - only print register access failure onceTim Gardner2013-04-251-2/+2
| | | | | | | | | | | | | | | | | | | | commit 83589b30f1e1dc9898986293c9336b8ce1705dec upstream. BugLink: http://bugs.launchpad.net/bugs/1128840 It appears that when this register read fails it never recovers, so I think there is no need to repeat the same error message ad infinitum. Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: users@rt2x00.serialmonkey.com Cc: netdev@vger.kernel.org Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* rt2x00: error in configurations with mesh support disabledFelix Fietkau2013-04-101-0/+2
| | | | | | | | | | | | | | | | | commit 6ef9e2f6d12ce9e2120916804d2ddd46b954a70b upstream. If CONFIG_MAC80211_MESH is not set, cfg80211 will now allow advertising interface combinations with NL80211_IFTYPE_MESH_POINT present. Add appropriate ifdefs to avoid running into errors. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> [lxiang: Backported for 3.4-stable. Removed code of simultaneous AP and mesh mode added in 4a5fc6d 3.9-rc1.] Signed-off-by: Lingzhu Xiang <lxiang@redhat.com> Reviewed-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* b43: A fix for DMA transmission sequence errorsIestyn C. Elfick2013-04-101-12/+53
| | | | | | | | | | | | | | | | | | | | | | | | commit b251412db99ccd4495ce372fec7daee27bf06923 upstream. Intermittently, b43 will report "Out of order TX status report on DMA ring". When this happens, the driver must be reset before communication can resume. The cause of the problem is believed to be an error in the closed-source firmware; however, all versions of the firmware are affected. This change uses the observation that the expected status is always 2 less than the observed value, and supplies a fake status report to skip one header/data pair. Not all devices suffer from this problem, but it can occur several times per second under heavy load. As each occurence kills the unmodified driver, this patch makes if possible for the affected devices to function. The patch logs only the first instance of the reset operation to prevent spamming the logs. Tested-by: Chris Vine <chris@cvine.freeserve.co.uk> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* rtlwifi: usb: add missing freeing of skbuffJussi Kivilinna2013-04-101-0/+1
| | | | | | | | | | commit 36ef0b473fbf43d5db23eea4616cc1d18cec245f upstream. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ath9k_hw: revert chainmask to user configuration after calibrationFelix Fietkau2013-04-101-0/+4
| | | | | | | | | | | | | | | | | | | | | commit 74632d11a133b5baf6b9d622dd19d2f944d93d94 upstream. The commit 'ath9k_hw: fix calibration issues on chainmask that don't include chain 0' changed the hardware chainmask to the chip chainmask for the duration of the calibration, but the revert to user configuration in the reset path runs too early. That causes some issues with limiting the number of antennas (including spurious failure in hardware-generated packets). Fix this by reverting the chainmask after the essential parts of the calibration that need the workaround, and before NF calibration is run. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Tested-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* rtlwifi: rtl8192cu: Fix problem that prevents reassociationLarry Finger2013-03-271-52/+35
| | | | | | | | | | | | | | | | | | | | | commit 9437a248e7cac427c898bdb11bd1ac6844a1ead4 upstream. The driver was failing to clear the BSSID when a disconnect happened. That prevented a reconnection. This problem is reported at https://bugzilla.redhat.com/show_bug.cgi?id=789605, https://bugzilla.redhat.com/show_bug.cgi?id=866786, https://bugzilla.redhat.com/show_bug.cgi?id=906734, and https://bugzilla.kernel.org/show_bug.cgi?id=46171. Thanks to Jussi Kivilinna for making the critical observation that led to the solution. Reported-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Tested-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Tested-by: Alessandro Lannocca <alessandro.lannocca@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* rtlwifi: rtl8192cu: Fix schedule while atomic bug splatLarry Finger2013-03-271-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 664899786cb49cb52f620e06ac19c0be524a7cfa upstream. When run at debug 3 or higher, rtl8192cu reports a BUG as follows: BUG: scheduling while atomic: kworker/u:0/5281/0x00000002 INFO: lockdep is turned off. Modules linked in: rtl8192cu rtl8192c_common rtlwifi fuse af_packet bnep bluetooth b43 mac80211 cfg80211 ipv6 snd_hda_codec_conexant kvm_amd k vm snd_hda_intel snd_hda_codec bcma rng_core snd_pcm ssb mmc_core snd_seq snd_timer snd_seq_device snd i2c_nforce2 sr_mod pcmcia forcedeth i2c_core soundcore cdrom sg serio_raw k8temp hwmon joydev ac battery pcmcia_core snd_page_alloc video button wmi autofs4 ext4 mbcache jbd2 crc16 thermal processor scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh ata_generic pata_acpi pata_amd [last unloaded: rtlwifi] Pid: 5281, comm: kworker/u:0 Tainted: G W 3.8.0-wl+ #119 Call Trace: [<ffffffff814531e7>] __schedule_bug+0x62/0x70 [<ffffffff81459af0>] __schedule+0x730/0xa30 [<ffffffff81326e49>] ? usb_hcd_link_urb_to_ep+0x19/0xa0 [<ffffffff8145a0d4>] schedule+0x24/0x70 [<ffffffff814575ec>] schedule_timeout+0x18c/0x2f0 [<ffffffff81459ec0>] ? wait_for_common+0x40/0x180 [<ffffffff8133f461>] ? ehci_urb_enqueue+0xf1/0xee0 [<ffffffff810a579d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81459f65>] wait_for_common+0xe5/0x180 [<ffffffff8107d1c0>] ? try_to_wake_up+0x2d0/0x2d0 [<ffffffff8145a08e>] wait_for_completion_timeout+0xe/0x10 [<ffffffff8132ab1c>] usb_start_wait_urb+0x8c/0x100 [<ffffffff8132adf9>] usb_control_msg+0xd9/0x130 [<ffffffffa057dd8d>] _usb_read_sync+0xcd/0x140 [rtlwifi] [<ffffffffa057de0e>] _usb_read32_sync+0xe/0x10 [rtlwifi] [<ffffffffa04b0555>] rtl92cu_update_hal_rate_table+0x1a5/0x1f0 [rtl8192cu] The cause is a synchronous read from routine rtl92cu_update_hal_rate_table(). The resulting output is not critical, thus the debug statement is deleted. Reported-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: the deleted code is slightly different] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* mwifiex: fix potential out-of-boundary access to ibss rate tableBing Zhao2013-03-271-4/+3
| | | | | | | | | | | | | | | commit 5f0fabf84d7b52f979dcbafa3d3c530c60d9a92c upstream. smatch found this error: CHECK drivers/net/wireless/mwifiex/join.c drivers/net/wireless/mwifiex/join.c:1121 mwifiex_cmd_802_11_ad_hoc_join() error: testing array offset 'i' after use. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* iwlwifi: always copy first 16 bytes of commandsJohannes Berg2013-03-202-15/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 8a964f44e01ad3bbc208c3e80d931ba91b9ea786 upstream. The FH hardware will always write back to the scratch field in commands, even host commands not just TX commands, which can overwrite parts of the command. This is problematic if the command is re-used (with IWL_HCMD_DFL_NOCOPY) and can cause calibration issues. Address this problem by always putting at least the first 16 bytes into the buffer we also use for the command header and therefore make the DMA engine write back into this. For commands that are smaller than 16 bytes also always map enough memory for the DMA engine to write back to. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: - Adjust context - Drop the IWL_HCMD_DFL_DUP handling - Fix descriptor addresses and lengths for tracepoint, but otherwise leave it unchanged] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* mwifiex: correct sleep delay counterAvinash Patil2013-03-201-1/+1
| | | | | | | | | | | | | | commit 3e7a4ff7c5b6423ddb644df9c41b8b6d2fb79d30 upstream. Maximum delay for waking up card is 50 ms. Because of typo in counter, this delay goes to 500ms. This patch fixes the bug. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ath9k_htc: fix signal strength handling issuesFelix Fietkau2013-03-202-7/+12
| | | | | | | | | | | | | | | | | | | commit 838f427955dcfd16858b0108ce29029da0d56a4e upstream. The ath9k commit 2ef167557c0a26c88162ecffb017bfcc51eb7b29 (ath9k: fix signal strength reporting issues) fixed an issue where the reported per-frame signal strength reported to mac80211 was being overwritten with an internal average. The same issue is also present in ath9k_htc. In addition to preventing the driver from overwriting the value, this commit also ensures that the internal average (which is used for ANI) only tracks beacons of the AP that we're connected to. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: use compare_ether_addr() instead of ether_addr_equal(), with opposite sense] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ath9k: fix RSSI dummy marker valueFelix Fietkau2013-03-201-1/+1
| | | | | | | | | | | | | | commit a3d63cadbad97671d740a9698acc2c95d1ca6e79 upstream. RSSI is being stored internally as s8 in several places. The indication of an unset RSSI value, ATH_RSSI_DUMMY_MARKER, was supposed to have been set to 127, but ended up being set to 0x127 because of a code cleanup mistake. This could lead to invalid signal strength values in a few places. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* b43: Increase number of RX DMA slotsLarry Finger2013-03-061-1/+1
| | | | | | | | | | | | | | | | | commit ccae0e50c16a7f7adb029c169147400d1ce9f703 upstream. Bastian Bittorf reported that some of the silent freezes on a Linksys WRT54G were due to overflow of the RX DMA ring buffer, which was created with 64 slots. That finding reminded me that I was seeing similar crashed on a netbook, which also has a relatively slow processor. After increasing the number of slots to 128, runs on the netbook that previously failed now worked; however, I found that 109 slots had been used in one test. For that reason, the number of slots is being increased to 256. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Bastian Bittorf <bittorf@bluebottle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* rtlwifi: usb: allocate URB control message setup_packet and data buffer ↵Jussi Kivilinna2013-03-061-16/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | separately commit bc6b89237acb3dee6af6e64e51a18255fef89cc2 upstream. rtlwifi allocates both setup_packet and data buffer of control message urb, using shared kmalloc in _usbctrl_vendorreq_async_write. Structure used for allocating is: struct { u8 data[254]; struct usb_ctrlrequest dr; }; Because 'struct usb_ctrlrequest' is __packed, setup packet is unaligned and DMA mapping of both 'data' and 'dr' confuses ARM/sunxi, leading to memory corruptions and freezes. Patch changes setup packet to be allocated separately. [v2]: - Use WARN_ON_ONCE instead of WARN_ON Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* rtlwifi: rtl8192cu: Add new USB IDLarry Finger2013-03-061-0/+1
| | | | | | | | | | | commit 8708aac79e4572ba673d7a21e94ddca9f3abb7fc upstream. A new model of the RTL8188CUS has appeared. Reported-and-tested-by: Thomas Rosenkrantz <tom.rosary@googlemail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* rtlwifi: rtl8192cu: Fix NULL dereference BUG when using new_idLarry Finger2013-03-063-4/+12
| | | | | | | | | | | | | | commit 957f4aca5fa0db69635271bc4621cc0b65b2d590 upstream. When the new_id entry in /sysfs is used for a foreign USB device, rtlwifi BUGS with a NULL pointer dereference because the per-driver configuration data is not available. The probe function has been restructured as suggested by Ben Hutchings <bhutchings@solarflare.com>. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: adjust context, indentation] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* p54usb: corrected USB ID for T-Com Sinus 154 data IITomasz Guszkowski2013-03-061-1/+1
| | | | | | | | | | | | | | commit 008e33f733ca51acb2dd9d88ea878693b04d1d2a upstream. Corrected USB ID for T-Com Sinus 154 data II. ISL3887-based. The device was tested in managed mode with no security, WEP 128 bit and WPA-PSK (TKIP) with firmware 2.13.1.0.lm87.arm (md5sum: 7d676323ac60d6e1a3b6d61e8c528248). It works. Signed-off-by: Tomasz Guszkowski <tsg@o2.pl> Acked-By: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* rt2800usb: Add support for 2001:3c1e (D-Link DWA-125 rev B1) USB Wi-Fi adapterMaia Kozheva2013-02-201-0/+1
| | | | | | | | | | | | | | | | | | | | | commit fd7b9270120ca7e53fbf0469febe0c68acf6a0a2 upstream. D-Link DWA-125/B1 is a relatively new USB Wi-Fi adapter, using a Ralink chipset supported by the rt2800usb driver. Currently, to work around the problem (it's missing in all present kernel versions, up to and including 3.7.x), I had to add this to /etc/rc.local: echo 2001 3c1e >> /sys/bus/usb/drivers/rt2800usb/new_id After that, the device works without problems. Been using it for over a week with no bugs in sight. The attached patch is trivial and simply adds the new USB ID to the list of devices handled by rt2800usb. Signed-off-by: Maia Kozheva <sikon@ubuntu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Wireless: rt2x00: Add device id for Sweex LW323 to rt2800usb.cJaume Delclòs2013-02-201-0/+1
| | | | | | | | | | | | commit 36f318bb124b231c01db6965a009f46d5731f012 upstream. This patch adds detection for the Sweex LW323 USB wireless network card in the rt2x00 driver (just one line in rt2800usb.c). It applies to linux-3.7-rc3. Signed-off-by: Jaume Delclòs <jaume@delclos.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* wireless: rt2x00: rt{2500,73}usb.c put back duplicate idXose Vazquez Perez2013-02-202-1/+2
| | | | | | | | | | | | | | | commit 8f35f787b75e9b6435ea37dabcae2d40dc72d31c upstream. put back 0x050d,0x7050 to rt73usb, same usb_id for two chips: K7SF5D7050A ver 2xxx is rt2500 K7SF5D7050B ver 3xxx is rt73 <http://en-us-support.belkin.com/app/answers/detail/a_id/297/kw/K7SF5D7050> Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* mwifiex: fix incomplete scan in case of IE parsing errorBing Zhao2013-02-201-4/+5
| | | | | | | | | | | | | | | | | | | | | commit 8a7d7cbf7b5ff9912ef50b3e94c9ad9f37b1c75f upstream. A scan request is split into multiple scan commands queued in scan_pending_q. Each scan command will be sent to firmware and its response is handlded one after another. If any error is detected while parsing IE in command response buffer the remaining data will be ignored and error is returned. We should check if there is any more scan commands pending in the queue before returning error. This ensures that we will call cfg80211_scan_done if this is the last scan command, or send next scan command in scan_pending_q to firmware. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* rtlwifi: Fix the usage of the wrong variable in usb.cLarry Finger2013-02-201-2/+2
| | | | | | | | | | | | | commit 0a06ad8e3a1cb5311b7dbafde45410aa1bce9d40 upstream. In routine _rtl_rx_pre_process(), skb_dequeue() is called to get an skb; however, the wrong variable name is used in subsequent calls. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* mwifiex: fix typo in PCIe adapter NULL checkAvinash Patil2013-02-061-1/+1
| | | | | | | | | | | | | commit 83f0c6d1f502bd75bb4a9e31e8d64e59c6894ad1 upstream. Add missing "!" as we are supposed to check "!card->adapter" in PCIe suspend handler. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Reviewed-by: Sergey V. <sftp.mtuci@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ath9k_hw: fix chain swap setting when setting rx chainmask to 5Felix Fietkau2013-02-061-20/+7
| | | | | | | | | | | | commit 24171dd92096fc370b195f3f6bdc0798855dc3f9 upstream. Chain swapping should only be enabled when the EEPROM chainmask is set to 5, regardless of what the runtime chainmask is. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: keep the special case for AR_SREV_9462 here] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ath9k_hw: fix calibration issues on chainmask that don't include chain 0Felix Fietkau2013-02-063-1/+4
| | | | | | | | | commit 4a8f199508d79ff8a7d1e22f47b912baaf225336 upstream. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* brcmsmac: increase timer reference count for new timers onlyPiotr Haber2013-02-061-3/+4
| | | | | | | | | | | | | | | | commit a1fe52801a992e590cdaee2fb47a94bac9b5da90 upstream. On hardware reintialization reference count of already existing timers would be increased again. This leads to problems on module unloading. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ath9k: fix double-free bug on beacon generate failureFelix Fietkau2013-02-061-0/+1
| | | | | | | | | | | | | commit 1adb2e2b5f85023d17eb4f95386a57029df27c88 upstream. When the next beacon is sent, the ath_buf from the previous run is reused. If getting a new beacon from mac80211 fails, bf->bf_mpdu is not reset, yet the skb is freed, leading to a double-free on the next beacon tx attempt, resulting in a system crash. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ath9k: do not link receive buffers during flushFelix Fietkau2013-02-061-4/+6
| | | | | | | | | | | | commit a3dc48e82bb146ef11cf75676c8410c1df29b0c4 upstream. On AR9300 the rx FIFO needs to be empty during reset to ensure that no further DMA activity is generated, otherwise it might lead to memory corruption issues. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ath9k_htc: Fix memory leakSujith Manoharan2013-02-061-0/+2
| | | | | | | | | | | | | | commit 0981c3b24ef664f5611008a6e6d0622fac6d892b upstream. SKBs that are allocated in the HTC layer do not have callbacks registered and hence ended up not being freed, Fix this by freeing them properly in the TX completion routine. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* mwifiex: check wait_event_interruptible return valueBing Zhao2013-02-061-11/+10
| | | | | | | | | | | | | | | | | | | | | commit 9c969d8ccb1e17bd20742f4ac9f00c1a64487234 upstream. wait_event_interruptible function returns -ERESTARTSYS if it's interrupted by a signal. Driver should check the return value and handle this case properly. In mwifiex_wait_queue_complete() routine, as we are now checking wait_event_interruptible return value, the condition check is not required. Also, we have removed mwifiex_cancel_pending_ioctl() call to avoid a chance of sending second command to FW by other path as soon as we clear current command node. FW can not handle two commands simultaneously. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* mwifiex: handle association failure case correctlyAmitkumar Karwar2013-02-061-1/+7
| | | | | | | | | | | | | | | | | | | | | commit b7097eb75fa11c302dcdec83f1dbfa874e0af0d1 upstream. Currently even if association is failed "iw link" shows some information about connected BSS and "Tx timeout" error is seen in dmesg log. This patch fixes below issues in the code to handle assoc failure case correctly. 1) "status" variable in mwifiex_wait_queue_complete() is not correctly updated. Hence driver doesn't inform cfg80211 stack about association failure. 2) During association network queues are stopped but carrier is not cleared, which gives Tx timeout error in failure case Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Revert: "rt2x00: Don't let mac80211 send a BAR when an AMPDU subframe fails"Stanislaw Gruszka2013-01-162-5/+5
| | | | | | | | | | | | | | | | | | | | | | | commit ab9d6e4ffe192427ce9e93d4f927b0faaa8a941e upstream. This revert: commit be03d4a45c09ee5100d3aaaedd087f19bc20d01f Author: Andreas Hartmann <andihartmann@01019freenet.de> Date: Tue Apr 17 00:25:28 2012 +0200 rt2x00: Don't let mac80211 send a BAR when an AMPDU subframe fails To fix problem workaround by above commit use IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL flag (see change log for "mac80211: introduce IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL" patch). Resolve: https://bugzilla.kernel.org/show_bug.cgi?id=42828 Bisected-by: Francisco Pina Martins <f.pinamartins@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* rt2x00: Don't let mac80211 send a BAR when an AMPDU subframe failsAndreas Hartmann2013-01-161-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit be03d4a45c09ee5100d3aaaedd087f19bc20d01f upstream. There are connection stalls or very poor throughputs with rt2800 hardware using 802.11n in AP mode since patch "mac80211: retry sending failed BAR frames later instead of tearing down aggr"[1][2]. Since rt2800 hardware is not able to correctly report the tx status of BAR frames, this patch removes as workaround the existing error handling on AP side, which lets mac80211 send a BAR when an AMPDU subframe fails. As a result, most wifi clients (aside from Intel STAs on Windows) instead will timeout now the reorder buffer and request the lost frame again. The correct solution would be, to tear down BA session on AP side. This patch was born on the basis of "[RFT] rt2x00: Tear down BA session on QoS frame failure"[3]. Thanks to Helmut Schaa for his support! [1] http://thread.gmane.org/gmane.linux.kernel.wireless.general/83297/focus=83304 [2] http://git.kernel.org/?p=linux/kernel/git/linville/wireless-testing.git;a=commit;h=f0425beda4d404a6e751439b562100b902ba9c98 [3] http://thread.gmane.org/gmane.linux.drivers.rt2x00.user/569 Signed-off-by: Andreas Hartmann <andihartmann@01019freenet.de> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* p54usb: add USBIDs for two more p54usb devicesChristian Lamparter2013-01-161-0/+3
| | | | | | | | | | | | | | | | | | | | commit 4010fe21a315b4223c25376714c6a2b61b722e5c upstream. This patch adds USBIDs for: - DrayTek Vigor 530 - Zoom 4410a It also adds a note about Gemtek WUBI-100GW and SparkLAN WL-682 USBID conflict [WUBI-100GW is a ISL3886+NET2280 (LM86 firmare) solution, whereas WL-682 is a ISL3887 (LM87 firmware)] device. Source: <http://www.wikidevi.com/wiki/Intersil/p54/usb/windows> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ath9k_hw: Fix RX gain initvals for AR9485Sujith Manoharan2013-01-161-2/+2
| | | | | | | | | | | | | | commit a796a1dd5da9645ad77aa687d1a890ecd63ab5a6 upstream. Populate iniModesRxGain with the correct initvals array for AR9485 v1.1 Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: - Adjust context - INIT_INI_ARRAY takes additional size and columns arguments] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* p54usb: add USB ID for T-Com Sinus 154 data IITomasz Guszkowski2013-01-161-0/+1
| | | | | | | | | | | commit 3194b7fcdf6caea338b5d2c72d76fed80437649c upstream. Added USB ID for T-Com Sinus 154 data II. Signed-off-by: Tomasz Guszkowski <tsg@o2.pl> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* iwlwifi: handle DMA mapping failuresJohannes Berg2013-01-031-2/+21
| | | | | | | | | | | | | | | | | | commit 7c34158231b2eda8dcbd297be2bb1559e69cb433 upstream. The RX replenish code doesn't handle DMA mapping failures, which will cause issues if there actually is a failure. This was reported by Shuah Khan who found a DMA mapping framework warning ("device driver failed to check map error"). Reported-by: Shuah Khan <shuah.khan@hp.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: - Adjust filename, context, indentation - Use bus(trans) instead of trans where necessary - Use hw_params(trans).rx_page_order instead of trans_pcie->rx_page_order] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* iwlwifi: don't handle masked interruptEmmanuel Grumbach2013-01-031-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 25a172655f837bdb032e451f95441bb4acec51bb upstream. This can lead to a panic if the driver isn't ready to handle them. Since our interrupt line is shared, we can get an interrupt at any time (and CONFIG_DEBUG_SHIRQ checks that even when the interrupt is being freed). If the op_mode has gone away, we musn't call it. To avoid this the transport disables the interrupts when the hw is stopped and the op_mode is leaving. If there is an event that would cause an interrupt the INTA register is updated regardless of the enablement of the interrupts: even if the interrupts are disabled, the INTA will be changed, but the device won't issue an interrupt. But the ISR can be called at any time, so we ought ignore the value in the INTA otherwise we can call the op_mode after it was freed. I found this bug when the op_mode_start failed, and called iwl_trans_stop_hw(trans, true). Then I played with the RFKILL button, and removed the module. While removing the module, the IRQ is freed, and the ISR is called (CONFIG_DEBUG_SHIRQ enabled). Panic. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.2: - Adjust context - Pass bus(trans), not trans, to iwl_{read,write}32()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ath9k_hw: Fix signal strength / channel noise reportingFelix Fietkau2013-01-032-0/+4
| | | | | | | | | | | | | | | | | | | commit b7c0c238898d200e80487516e2b67aba2a522cc0 upstream. While AR_PHY_CCA_NOM_VAL_* does contain the expected internal noise floor for a chip measured in clean air, it refers to the lowest expected reading. Depending on the frequency, this measurement can vary by about 6db, thus causing a higher reported channel noise and signal strength. Factor in the 6db offset when converting internal noisefloor to channel noise. This patch makes the reported values more accurate for all chips without affecting NF calibration behavior. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ath9k: ar9003: fix OTP register offsets for AR9340Gabor Juhos2013-01-031-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit b3cd8021379306c0be6932e4d3b4b01efc681769 upstream. Trying to access the OTP memory on the AR9340 causes a data bus error like this: Data bus error, epc == 86e84164, ra == 86e84164 Oops[#1]: Cpu 0 $ 0 : 00000000 00000061 deadc0de 00000000 $ 4 : b8115f18 00015f18 00000007 00000004 $ 8 : 00000001 7c7c3c7c 7c7c7c7c 7c7c7c7c $12 : 7c7c3c7c 001f0041 00000000 7c7c7c3c $16 : 86ee0000 00015f18 00000000 00000007 $20 : 00000004 00000064 00000004 86d71c44 $24 : 00000000 86e6ca00 $28 : 86d70000 86d71b20 86ece0c0 86e84164 Hi : 00000000 Lo : 00000064 epc : 86e84164 ath9k_hw_wait+0x58/0xb0 [ath9k_hw] Tainted: G O ra : 86e84164 ath9k_hw_wait+0x58/0xb0 [ath9k_hw] Status: 1100d403 KERNEL EXL IE Cause : 4080801c PrId : 0001974c (MIPS 74Kc) Modules linked in: ath9k(O+) ath9k_common(O) ath9k_hw(O) ath(O) ar934x_nfc mac80211(O) usbcore usb_common scsi_mod nls_base nand nand_ecc nand_ids crc_ccitt cfg80211(O) compat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio Process insmod (pid: 459, threadinfo=86d70000, task=87942140, tls=779ac440) Stack : 802fb500 000200da 804db150 804e0000 87816130 86ee0000 00010000 86d71b88 86d71bc0 00000004 00000003 86e9fcd0 80305300 0002c0d0 86e74c50 800b4c20 000003e8 00000001 00000000 86ee0000 000003ff 86e9fd64 80305300 80123938 fffffffc 00000004 000058bc 00000000 86ea0000 86ee0000 000001ff 878d6000 99999999 86e9fdc0 86ee0fcc 86e9e664 0000c0d0 86ee0000 0000700000007000 ... Call Trace: [<86e84164>] ath9k_hw_wait+0x58/0xb0 [ath9k_hw] [<86e9fcd0>] ath9k_hw_setup_statusring+0x16b8/0x1c7c [ath9k_hw] Code: 0000a812 0040f809 00000000 <00531024> 1054000b 24020001 0c05b5dc 2404000a 26520001 The cause of the error is that the OTP register offsets are different on the AR9340 than the actually used values. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* Revert "ath9k_hw: Update AR9003 high_power tx gain table"Felix Fietkau2013-01-031-86/+86
| | | | | | | | | | | | | | | | | | commit 9c170e068636deb3e3f96114034bb711675f0faa upstream. This reverts commit f74b9d365ddd33a375802b064f96a5d0e99af7c0. Turns out reverting commit a240dc7b3c7463bd60cf0a9b2a90f52f78aae0fd "ath9k_hw: Updated AR9003 tx gain table for 5GHz" was not enough to bring the tx power back to normal levels on devices like the Buffalo WZR-HP-G450H, this one needs to be reverted as well. This revert improves tx power by ~10 db on that device Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: rmanohar@qca.qualcomm.com Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* ath9k_hw: Enable hw PLL power save for AR9462Rajkumar Manoharan2013-01-031-7/+4
| | | | | | | | | | | | | | commit 1680260226a8fd2aab590319da83ad8e610da9bd upstream. This reduced the power consumption to half in full and network sleep. Cc: Paul Stewart <pstew@chromium.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: - INIT_INI_ARRAY macro requires an explicit size argument - Remove the now-redundant macro PCIE_PLL_ON_CREQ_DIS_L1_2P0] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* mwifiex: report error to MMC core if we cannot suspendBing Zhao2012-12-061-5/+6
| | | | | | | | | | | | | commit dd321acddc3be1371263b8c9e6c6f2af89f63d57 upstream. When host_sleep_config command fails we should return error to MMC core to indicate the failure for our device. The misspelled variable is also removed as it's redundant. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* mwifiex: fix system hang issue in cmd timeout error caseBing Zhao2012-12-061-3/+8
| | | | | | | | | | | | | | | | | | | | | commit b1a47aa5e1e159e2cb06d7dfcc17ef5149b09299 upstream. Reported by Tim Shepard: I was seeing sporadic failures (wedgeups), and the majority of those failures I saw printed the printouts in mwifiex_cmd_timeout_func with cmd = 0xe5 which is CMD_802_11_HS_CFG_ENH. When this happens, two minutes later I get notified that the rtcwake thread is blocked, like this: INFO: task rtcwake:3495 blocked for more than 120 seconds. To get the hung thread unblocked we wake up the cmd wait queue and cancel the ioctl. Reported-by: Tim Shepard <shep@laptop.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
* rtlwifi: rtl8192cu: Add new USB IDAlbert Pool2012-12-061-0/+1
| | | | | | | | | | | | commit a485e827f07bfdd0762059386e6e787bed6e81ee upstream. This is an ISY IWL 2000. Probably a clone of Belkin F7D1102 050d:1102. Its FCC ID is the same. Signed-off-by: Albert Pool <albertpool@solcon.nl> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
View Lorry Controller Status