summaryrefslogtreecommitdiff
path: root/net/bridge/br_input.c
Commit message (Collapse)AuthorAgeFilesLines
* net: bridge: fix dest lookup when vlan proto doesn't matchNikolay Aleksandrov2017-07-141-1/+2
| | | | | | | | | | | | | | | | | | | With 802.1ad support the vlan_ingress code started checking for vlan protocol mismatch which causes the current tag to be inserted and the bridge vlan protocol & pvid to be set. The vlan tag insertion changes the skb mac_header and thus the lookup mac dest pointer which was loaded prior to calling br_allowed_ingress in br_handle_frame_finish is VLAN_HLEN bytes off now, pointing to the last two bytes of the destination mac and the first four of the source mac causing lookups to always fail and broadcasting all such packets to all ports. Same thing happens for locally originated packets when passing via br_dev_xmit. So load the dest pointer after the vlan checks and possible skb change. Fixes: 8580e2117c06 ("bridge: Prepare for 802.1ad vlan filtering support") Reported-by: Anitha Narasimha Murthy <anitha@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: drop netfilter fake rtable unconditionallyFlorian Westphal2017-03-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | Andreas reports kernel oops during rmmod of the br_netfilter module. Hannes debugged the oops down to a NULL rt6info->rt6i_indev. Problem is that br_netfilter has the nasty concept of adding a fake rtable to skb->dst; this happens in a br_netfilter prerouting hook. A second hook (in bridge LOCAL_IN) is supposed to remove these again before the skb is handed up the stack. However, on module unload hooks get unregistered which means an skb could traverse the prerouting hook that attaches the fake_rtable, while the 'fake rtable remove' hook gets removed from the hooklist immediately after. Fixes: 34666d467cbf1e2e3c7 ("netfilter: bridge: move br_netfilter out of the core") Reported-by: Andreas Karis <akaris@redhat.com> Debugged-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: fdb: converge fdb searching functions into oneNikolay Aleksandrov2017-02-141-2/+2
| | | | | | | | | | | | Before this patch we had 3 different fdb searching functions which was confusing. This patch reduces all of them to one - fdb_find_rcu(), and two flavors: br_fdb_find() which requires hash_lock and br_fdb_find_rcu which requires RCU. This makes it clear what needs to be used, we also remove two abusers of __br_fdb_get which called it under hash_lock and replace them with br_fdb_find(). Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: avoid unnecessary read of jiffiesstephen hemminger2017-02-071-2/+4
| | | | | | | | Jiffies is volatile so read it once. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: fdb: write to used and updated at most once per jiffyNikolay Aleksandrov2017-02-061-1/+2
| | | | | | | | | Writing once per jiffy is enough to limit the bridge's false sharing. After this change the bridge doesn't show up in the local load HitM stats. Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: vlan dst_metadata hooks in ingress and egress pathsRoopa Prabhu2017-02-031-1/+7
| | | | | | | | | | | | | - ingress hook: - if port is a tunnel port, use tunnel info in attached dst_metadata to map it to a local vlan - egress hook: - if port is a tunnel port, use tunnel info attached to vlan to set dst_metadata on the skb CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-09-121-5/+2
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/qlogic/qed/qed_dcbx.c drivers/net/phy/Kconfig All conflicts were cases of overlapping commits. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: bridge: don't increment tx_dropped in br_do_proxy_arpNikolay Aleksandrov2016-09-011-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | pskb_may_pull may fail due to various reasons (e.g. alloc failure), but the skb isn't changed/dropped and processing continues so we shouldn't increment tx_dropped. CC: Kyeyoon Park <kyeyoonp@codeaurora.org> CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Stephen Hemminger <stephen@networkplumber.org> CC: bridge@lists.linux-foundation.org Fixes: 958501163ddd ("bridge: Add support for IEEE 802.11 Proxy ARP") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: change unicast boolean to exact pkt_typeNikolay Aleksandrov2016-09-011-15/+25
| | | | | | | | | | | | | | | | | | Remove the unicast flag and introduce an exact pkt_type. That would help us for the upcoming per-port multicast flood flag and also slightly reduce the tests in the input fast path. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bridge: switchdev: Add forward mark support for stacked devicesIdo Schimmel2016-08-261-0/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | switchdev_port_fwd_mark_set() is used to set the 'offload_fwd_mark' of port netdevs so that packets being flooded by the device won't be flooded twice. It works by assigning a unique identifier (the ifindex of the first bridge port) to bridge ports sharing the same parent ID. This prevents packets from being flooded twice by the same switch, but will flood packets through bridge ports belonging to a different switch. This method is problematic when stacked devices are taken into account, such as VLANs. In such cases, a physical port netdev can have upper devices being members in two different bridges, thus requiring two different 'offload_fwd_mark's to be configured on the port netdev, which is impossible. The main problem is that packet and netdev marking is performed at the physical netdev level, whereas flooding occurs between bridge ports, which are not necessarily port netdevs. Instead, packet and netdev marking should really be done in the bridge driver with the switch driver only telling it which packets it already forwarded. The bridge driver will mark such packets using the mark assigned to the ingress bridge port and will prevent the packet from being forwarded through any bridge port sharing the same mark (i.e. having the same parent ID). Remove the current switchdev 'offload_fwd_mark' implementation and instead implement the proposed method. In addition, make rocker - the sole user of the mark - use the proposed method. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Fix incorrect re-injection of LLDP packetsIdo Schimmel2016-07-251-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 8626c56c8279 ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") caused LLDP packets arriving through a bridge port to be re-injected to the Rx path with skb->dev set to the bridge device, but this breaks the lldpad daemon. The lldpad daemon opens a packet socket with protocol set to ETH_P_LLDP for any valid device on the system, which doesn't not include soft devices such as bridge and VLAN. Since packet sockets (ptype_base) are processed in the Rx path after the Rx handler, LLDP packets with skb->dev set to the bridge device never reach the lldpad daemon. Fix this by making the bridge's Rx handler re-inject LLDP packets with RX_HANDLER_PASS, which effectively restores the behaviour prior to the mentioned commit. This means netfilter will never receive LLDP packets coming through a bridge port, as I don't see a way in which we can have okfn() consume the packet without breaking existing behaviour. I've already carried out a similar fix for STP packets in commit 56fae404fb2c ("bridge: Fix incorrect re-injection of STP packets"). Fixes: 8626c56c8279 ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Cc: Florian Westphal <fw@strlen.de> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: remove _deliver functions and consolidate forward codeNikolay Aleksandrov2016-07-161-3/+3
| | | | | | | | | | | | | | | Before this patch we had two flavors of most forwarding functions - _forward and _deliver, the difference being that the latter are used when the packets are locally originated. Instead of all this function pointer passing and code duplication, we can just pass a boolean noting that the packet was locally originated and use that to perform the necessary checks in __br_forward. This gives a minor performance improvement but more importantly consolidates the forwarding paths. Also add a kernel doc comment to explain the exported br_forward()'s arguments. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: drop skb2/skb0 variables and use a local_rcv booleanNikolay Aleksandrov2016-07-161-15/+10
| | | | | | | | | | | Currently if the packet is going to be received locally we set skb0 or sometimes called skb2 variables to the original skb. This can get confusing and also we can avoid one conditional on the fast path by simply using a boolean and passing it around. Thanks to Roopa for the name suggestion. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: rearrange flood vs unicast receive pathsNikolay Aleksandrov2016-07-161-15/+14
| | | | | | | | This patch removes one conditional from the unicast path by using the fact that skb is NULL only when the packet is multicast or is local. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: minor style adjustments in br_handle_frame_finishNikolay Aleksandrov2016-07-161-10/+8
| | | | | | | Trivial style changes in br_handle_frame_finish. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: extend MLD/IGMP query statsNikolay Aleksandrov2016-07-091-1/+1
| | | | | | | | | | | | | | | | | | | As was suggested this patch adds support for the different versions of MLD and IGMP query types. Since the user visible structure is still in net-next we can augment it instead of adding netlink attributes. The distinction between the different IGMP/MLD query types is done as suggested in Section 7.1, RFC 3376 [1] and Section 8.1, RFC 3810 [2] based on query payload size and code for IGMP. Since all IGMP packets go through multicast_rcv() and it uses ip_mc_check_igmp/ipv6_mc_check_mld we can be sure that at least the ip/ipv6 header can be directly used. [1] https://tools.ietf.org/html/rfc3376#section-7 [2] https://tools.ietf.org/html/rfc3810#section-8.1 Suggested-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bridge: add support for IGMP/MLD stats and export them via netlinkNikolay Aleksandrov2016-06-301-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds stats support for the currently used IGMP/MLD types by the bridge. The stats are per-port (plus one stat per-bridge) and per-direction (RX/TX). The stats are exported via netlink via the new linkxstats API (RTM_GETSTATS). In order to minimize the performance impact, a new option is used to enable/disable the stats - multicast_stats_enabled, similar to the recent vlan stats. Also in order to avoid multiple IGMP/MLD type lookups and checks, we make use of the current "igmp" member of the bridge private skb->cb region to record the type on Rx (both host-generated and external packets pass by multicast_rcv()). We can do that since the igmp member was used as a boolean and all the valid IGMP/MLD types are positive values. The normal bridge fast-path is not affected at all, the only affected paths are the flooding ones and since we make use of the IGMP/MLD type, we can quickly determine if the packet should be counted using cache-hot data (cb's igmp member). We add counters for: * IGMP Queries * IGMP Leaves * IGMP v1/v2/v3 reports * MLD Queries * MLD Leaves * MLD v1/v2 reports These are invaluable when monitoring or debugging complex multicast setups with bridges. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Fix incorrect re-injection of STP packetsIdo Schimmel2016-06-101-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit 8626c56c8279 ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") fixed incorrect usage of NF_HOOK's return value by consuming packets in okfn via br_pass_frame_up(). However, this function re-injects packets to the Rx path with skb->dev set to the bridge device, which breaks kernel's STP, as all STP packets appear to originate from the bridge device itself. Instead, if STP is enabled and bridge isn't a 802.1ad bridge, then learn packet's SMAC and inject it back to the Rx path for further processing by the packet handlers. The patch also makes netfilter's behavior consistent with regards to packets destined to the Bridge Group Address, as no hook registered at LOCAL_IN will ever be called, regardless if STP is enabled or not. Cc: Florian Westphal <fw@strlen.de> Cc: Shmulik Ladkani <shmulik.ladkani@gmail.com> Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Fixes: 8626c56c8279 ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdictFlorian Westphal2016-03-141-9/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zefir Kurtisi reported kernel panic with an openwrt specific patch. However, it turns out that mainline has a similar bug waiting to happen. Once NF_HOOK() returns the skb is in undefined state and must not be used. Moreover, the okfn must consume the skb to support async processing (NF_QUEUE). Current okfn in this spot doesn't consume it and caller assumes that NF_HOOK return value tells us if skb was freed or not, but thats wrong. It "works" because no in-tree user registers a NFPROTO_BRIDGE hook at LOCAL_IN that returns STOLEN or NF_QUEUE verdicts. Once we add NF_QUEUE support for nftables bridge this will break -- NF_QUEUE holds the skb for async processing, caller will erronoulsy return RX_HANDLER_PASS and on reinject netfilter will access free'd skb. Fix this by pushing skb up the stack in the okfn instead. NB: It also seems dubious to use LOCAL_IN while bypassing PRE_ROUTING completely in this case but this is how its been forever so it seems preferable to not change this. Cc: Felix Fietkau <nbd@openwrt.org> Cc: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Florian Westphal <fw@strlen.de> Tested-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: vlan: use proper rcu for the vlgrp memberNikolay Aleksandrov2015-10-131-2/+2
| | | | | | | | | | | | | The bridge and port's vlgrp member is already used in RCU way, currently we rely on the fact that it cannot disappear while the port exists but that is error-prone and we might miss places with improper locking (either RCU or RTNL must be held to walk the vlan_list). So make it official and use RCU for vlgrp to catch offenders. Introduce proper vlgrp accessors and use them consistently throughout the code. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: vlan: move pvid inside net_bridge_vlan_groupNikolay Aleksandrov2015-10-011-1/+1
| | | | | | | | | | | One obvious way to converge more code (which was also used by the previous vlan code) is to move pvid inside net_bridge_vlan_group. This allows us to simplify some and remove other port-specific functions. Also gives us the ability to simply pass the vlan group and use all of the contained information. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: vlan: add per-vlan struct and move to rhashtablesNikolay Aleksandrov2015-09-291-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the bridge vlan implementation to use rhashtables instead of bitmaps. The main motivation behind this change is that we need extensible per-vlan structures (both per-port and global) so more advanced features can be introduced and the vlan support can be extended. I've tried to break this up but the moment net_port_vlans is changed and the whole API goes away, thus this is a larger patch. A few short goals of this patch are: - Extensible per-vlan structs stored in rhashtables and a sorted list - Keep user-visible behaviour (compressed vlans etc) - Keep fastpath ingress/egress logic the same (optimizations to come later) Here's a brief list of some of the new features we'd like to introduce: - per-vlan counters - vlan ingress/egress mapping - per-vlan igmp configuration - vlan priorities - avoid fdb entries replication (e.g. local fdb scaling issues) The structure is kept single for both global and per-port entries so to avoid code duplication where possible and also because we'll soon introduce "port0 / aka bridge as port" which should simplify things further (thanks to Vlad for the suggestion!). Now we have per-vlan global rhashtable (bridge-wide) and per-vlan port rhashtable, if an entry is added to a port it'll get a pointer to its global context so it can be quickly accessed later. There's also a sorted vlan list which is used for stable walks and some user-visible behaviour such as the vlan ranges, also for error paths. VLANs are stored in a "vlan group" which currently contains the rhashtable, sorted vlan list and the number of "real" vlan entries. A good side-effect of this change is that it resembles how hw keeps per-vlan data. One important note after this change is that if a VLAN is being looked up in the bridge's rhashtable for filtering purposes (or to check if it's an existing usable entry, not just a global context) then the new helper br_vlan_should_use() needs to be used if the vlan is found. In case the lookup is done only with a port's vlan group, then this check can be skipped. Things tested so far: - basic vlan ingress/egress - pvids - untagged vlans - undef CONFIG_BRIDGE_VLAN_FILTERING - adding/deleting vlans in different scenarios (with/without global ctx, while transmitting traffic, in ranges etc) - loading/removing the module while having/adding/deleting vlans - extracting bridge vlan information (user ABI), compressed requests - adding/deleting fdbs on vlans - bridge mac change, promisc mode - default pvid change - kmemleak ON during the whole time Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netfilter: Pass net into okfnEric W. Biederman2015-09-171-3/+4
| | | | | | | | | | | | | | | | | | This is immediately motivated by the bridge code that chains functions that call into netfilter. Without passing net into the okfns the bridge code would need to guess about the best expression for the network namespace to process packets in. As net is frequently one of the first things computed in continuation functions after netfilter has done it's job passing in the desired network namespace is in many cases a code simplification. To support this change the function dst_output_okfn is introduced to simplify passing dst_output as an okfn. For the moment dst_output_okfn just silently drops the struct net. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netfilter: Pass struct net into the netfilter hooksEric W. Biederman2015-09-171-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pass a network namespace parameter into the netfilter hooks. At the call site of the netfilter hooks the path a packet is taking through the network stack is well known which allows the network namespace to be easily and reliabily. This allows the replacement of magic code like "dev_net(state->in?:state->out)" that appears at the start of most netfilter hooks with "state->net". In almost all cases the network namespace passed in is derived from the first network device passed in, guaranteeing those paths will not see any changes in practice. The exceptions are: xfrm/xfrm_output.c:xfrm_output_resume() xs_net(skb_dst(skb)->xfrm) ipvs/ip_vs_xmit.c:ip_vs_nat_send_or_cont() ip_vs_conn_net(cp) ipvs/ip_vs_xmit.c:ip_vs_send_or_cont() ip_vs_conn_net(cp) ipv4/raw.c:raw_send_hdrinc() sock_net(sk) ipv6/ip6_output.c:ip6_xmit() sock_net(sk) ipv6/ndisc.c:ndisc_send_skb() dev_net(skb->dev) not dev_net(dst->dev) ipv6/raw.c:raw6_send_hdrinc() sock_net(sk) br_netfilter_hooks.c:br_nf_pre_routing_finish() dev_net(skb->dev) before skb->dev is set to nf_bridge->physindev In all cases these exceptions seem to be a better expression for the network namespace the packet is being processed in then the historic "dev_net(in?in:out)". I am documenting them in case something odd pops up and someone starts trying to track down what happened. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Add br_netif_receive_skb remove netif_receive_skb_skEric W. Biederman2015-09-171-1/+6
| | | | | | | | netif_receive_skb_sk is only called once in the bridge code, replace it with a bridge specific function that calls netif_receive_skb. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netfilter: Pass socket pointer down through okfn().David Miller2015-04-071-7/+9
| | | | | | | | | | | | | | | | | | | On the output paths in particular, we have to sometimes deal with two socket contexts. First, and usually skb->sk, is the local socket that generated the frame. And second, is potentially the socket used to control a tunneling socket, such as one the encapsulates using UDP. We do not want to disassociate skb->sk when encapsulating in order to fix this, because that would break socket memory accounting. The most extreme case where this can cause huge problems is an AF_PACKET socket transmitting over a vxlan device. We hit code paths doing checks that assume they are dealing with an ipv4 socket, but are actually operating upon the AF_PACKET one. Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Extend Proxy ARP design to allow optional rules for Wi-FiJouni Malinen2015-03-051-7/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This extends the design in commit 958501163ddd ("bridge: Add support for IEEE 802.11 Proxy ARP") with optional set of rules that are needed to meet the IEEE 802.11 and Hotspot 2.0 requirements for ProxyARP. The previously added BR_PROXYARP behavior is left as-is and a new BR_PROXYARP_WIFI alternative is added so that this behavior can be configured from user space when required. In addition, this enables proxyarp functionality for unicast ARP requests for both BR_PROXYARP and BR_PROXYARP_WIFI since it is possible to use unicast as well as broadcast for these frames. The key differences in functionality: BR_PROXYARP: - uses the flag on the bridge port on which the request frame was received to determine whether to reply - block bridge port flooding completely on ports that enable proxy ARP BR_PROXYARP_WIFI: - uses the flag on the bridge port to which the target device of the request belongs - block bridge port flooding selectively based on whether the proxyarp functionality replied Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: only provide proxy ARP when CONFIG_INET is enabledArnd Bergmann2015-01-141-1/+2
| | | | | | | | | | | | | | | | | | When IPV4 support is disabled, we cannot call arp_send from the bridge code, which would result in a kernel link error: net/built-in.o: In function `br_handle_frame_finish': :(.text+0x59914): undefined reference to `arp_send' :(.text+0x59a50): undefined reference to `arp_tbl' This makes the newly added proxy ARP support in the bridge code depend on the CONFIG_INET symbol and lets the compiler optimize the code out to avoid the link error. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 958501163ddd ("bridge: Add support for IEEE 802.11 Proxy ARP") Cc: Kyeyoon Park <kyeyoonp@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Add support for IEEE 802.11 Proxy ARPKyeyoon Park2014-10-271-0/+60
| | | | | | | | | | | | | | | | | | | | | | | | This feature is defined in IEEE Std 802.11-2012, 10.23.13. It allows the AP devices to keep track of the hardware-address-to-IP-address mapping of the mobile devices within the WLAN network. The AP will learn this mapping via observing DHCP, ARP, and NS/NA frames. When a request for such information is made (i.e. ARP request, Neighbor Solicitation), the AP will respond on behalf of the associated mobile device. In the process of doing so, the AP will drop the multicast request frame that was intended to go out to the wireless medium. It was recommended at the LKS workshop to do this implementation in the bridge layer. vxlan.c is already doing something very similar. The DHCP snooping code will be added to the userspace application (hostapd) per the recommendation. This RFC commit is only for IPv4. A similar approach in the bridge layer will be taken for IPv6 as well. Signed-off-by: Kyeyoon Park <kyeyoonp@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* netfilter: bridge: move br_netfilter out of the corePablo Neira Ayuso2014-09-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Jesper reported that br_netfilter always registers the hooks since this is part of the bridge core. This harms performance for people that don't need this. This patch modularizes br_netfilter so it can be rmmod'ed, thus, the hooks can be unregistered. I think the bridge netfilter should have been a separated module since the beginning, Patrick agreed on that. Note that this is breaking compatibility for users that expect that bridge netfilter is going to be available after explicitly 'modprobe bridge' or via automatic load through brctl. However, the damage can be easily undone by modprobing br_netfilter. The bridge core also spots a message to provide a clue to people that didn't notice that this has been deprecated. On top of that, the plan is that nftables will not rely on this software layer, but integrate the connection tracking into the bridge layer to enable stateful filtering and NAT, which is was bridge netfilter users seem to require. This patch still keeps the fake_dst_ops in the bridge core, since this is required by when the bridge port is initialized. So we can safely modprobe/rmmod br_netfilter anytime. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Florian Westphal <fw@strlen.de>
* bridge: Prepare for forwarding another bridge group addressesToshiaki Makita2014-06-111-2/+6
| | | | | | | | | | | | | If a bridge is an 802.1ad bridge, it must forward another bridge group addresses (the Nearest Customer Bridge group addresses). (For details, see IEEE 802.1Q-2011 8.6.3.) As user might not want group_fwd_mask to be modified by enabling 802.1ad, introduce a new mask, group_fwd_mask_required, which indicates addresses the bridge wants to forward. This will be set by enabling 802.1ad. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Prevent insertion of FDB entry with disallowed vlanToshiaki Makita2014-06-021-2/+2
| | | | | | | | | | | | | | | | br_handle_local_finish() is allowing us to insert an FDB entry with disallowed vlan. For example, when port 1 and 2 are communicating in vlan 10, and even if vlan 10 is disallowed on port 3, port 3 can interfere with their communication by spoofed src mac address with vlan id 10. Note: Even if it is judged that a frame should not be learned, it should not be dropped because it is destined for not forwarding layer but higher layer. See IEEE 802.1Q-2011 8.13.10. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Fix double free and memory leak around br_allowed_ingressToshiaki Makita2014-04-111-1/+1
| | | | | | | | | | | | | | | | | br_allowed_ingress() has two problems. 1. If br_allowed_ingress() is called by br_handle_frame_finish() and vlan_untag() in br_allowed_ingress() fails, skb will be freed by both vlan_untag() and br_handle_frame_finish(). 2. If br_allowed_ingress() is called by br_dev_xmit() and br_allowed_ingress() fails, the skb will not be freed. Fix these two problems by freeing the skb in br_allowed_ingress() if it fails. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Fix crash with vlan filtering and tcpdumpVlad Yasevich2014-03-281-5/+6
| | | | | | | | | | | | | | | | | | When the vlan filtering is enabled on the bridge, but the filter is not configured on the bridge device itself, running tcpdump on the bridge device will result in a an Oops with NULL pointer dereference. The reason is that br_pass_frame_up() will bypass the vlan check because promisc flag is set. It will then try to get the table pointer and process the packet based on the table. Since the table pointer is NULL, we oops. Catch this special condition in br_handle_vlan(). Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> CC: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Fix the way to find old local fdb entries in br_fdb_changeaddrToshiaki Makita2014-02-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | br_fdb_changeaddr() assumes that there is at most one local entry per port per vlan. It used to be true, but since commit 36fd2b63e3b4 ("bridge: allow creating/deleting fdb entries via netlink"), it has not been so. Therefore, the function might fail to search a correct previous address to be deleted and delete an arbitrary local entry if user has added local entries manually. Example of problematic case: ip link set eth0 address ee:ff:12:34:56:78 brctl addif br0 eth0 bridge fdb add 12:34:56:78:90:ab dev eth0 master ip link set eth0 address aa:bb:cc:dd:ee:ff Then, the address 12:34:56:78:90:ab might be deleted instead of ee:ff:12:34:56:78, the original mac address of eth0. Address this issue by introducing a new flag, added_by_user, to struct net_bridge_fdb_entry. Note that br_fdb_delete_by_port() has to set added_by_user to 0 in cases like: ip link set eth0 address 12:34:56:78:90:ab ip link set eth1 address aa:bb:cc:dd:ee:ff brctl addif br0 eth0 bridge fdb add aa:bb:cc:dd:ee:ff dev eth0 master brctl addif br0 eth1 brctl delif br0 eth0 In this case, kernel should delete the user-added entry aa:bb:cc:dd:ee:ff, but it also should have been added by "brctl addif br0 eth1" originally, so we don't delete it and treat it a new kernel-created entry. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: unify the pcpu_tstats and br_cpu_netstats as oneLi RongQing2014-01-041-1/+1
| | | | | | | | | | | | They are same, so unify them as one, pcpu_sw_netstats. Define pcpu_sw_netstat in netdevice.h, remove pcpu_tstats from if_tunnel and remove br_cpu_netstats from br_private.h Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: pass correct vlan id to multicast codeVlad Yasevich2013-10-291-1/+1
| | | | | | | | | | | | | Currently multicast code attempts to extrace the vlan id from the skb even when vlan filtering is disabled. This can lead to mdb entries being created with the wrong vlan id. Pass the already extracted vlan id to the multicast filtering code to make the correct id is used in creation as well as lookup. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: separate querier and query timer into IGMP/IPv4 and MLD/IPv6 onesLinus Lüssing2013-08-301-1/+1
| | | | | | | | | | | | | | | | | | Currently we would still potentially suffer multicast packet loss if there is just either an IGMP or an MLD querier: For the former case, we would possibly drop IPv6 multicast packets, for the latter IPv4 ones. This is because we are currently assuming that if either an IGMP or MLD querier is present that the other one is present, too. This patch makes the behaviour and fix added in "bridge: disable snooping if there is no querier" (b00589af3b04) to also work if there is either just an IGMP or an MLD querier on the link: It refines the deactivation of the snooping to be protocol specific by using separate timers for the snooped IGMP and MLD queries as well as separate timers for our internal IGMP and MLD queriers. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: disable snooping if there is no querierLinus Lüssing2013-07-311-1/+2
| | | | | | | | | | | | | | | | | | | | | If there is no querier on a link then we won't get periodic reports and therefore won't be able to learn about multicast listeners behind ports, potentially leading to lost multicast packets, especially for multicast listeners that joined before the creation of the bridge. These lost multicast packets can appear since c5c23260594 ("bridge: Add multicast_querier toggle and disable queries by default") in particular. With this patch we are flooding multicast packets if our querier is disabled and if we didn't detect any other querier. A grace period of the Maximum Response Delay of the querier is added to give multicast responses enough time to arrive and to be learned from before disabling the flooding behaviour again. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Add a flag to control unicast packet flood.Vlad Yasevich2013-06-111-3/+6
| | | | | | | | | | | Add a flag to control flood of unicast traffic. By default, flood is on and the bridge will flood unicast traffic if it doesn't know the destination. When the flag is turned off, unicast traffic without an FDB will not be forwarded to the specified port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Add flag to control mac learning.Vlad Yasevich2013-06-111-2/+4
| | | | | | | | | | Allow user to control whether mac learning is enabled on the port. By default, mac learning is enabled. Disabling mac learning will cause new dynamic FDB entries to not be created for a particular port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: add missing vid to br_mdb_get()Cong Wang2013-03-071-1/+1
| | | | | | | | | | | | Obviously, vid should be considered when searching for multicast group. Cc: Vlad Yasevich <vyasevic@redhat.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Vlad Yasevich <vyasevich@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Add vlan to unicast fdb entriesVlad Yasevich2013-02-131-3/+6
| | | | | | | | | | This patch adds vlan to unicast fdb entries that are created for learned addresses (not the manually configured ones). It adds vlan id into the hash mix and uses vlan as an addditional parameter for an entry match. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Implement vlan ingress/egress policy with PVID.Vlad Yasevich2013-02-131-1/+6
| | | | | | | | | | | At ingress, any untagged traffic is assigned to the PVID. Any tagged traffic is filtered according to membership bitmap. At egress, if the vlan matches the PVID, the frame is sent untagged. Otherwise the frame is sent tagged. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Verify that a vlan is allowed to egress on given portVlad Yasevich2013-02-131-0/+10
| | | | | | | | When bridge forwards a frame, make sure that a frame is allowed to egress on that port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bridge: Validate that vlan is permitted on ingressVlad Yasevich2013-02-131-0/+4
| | | | | | | | | When a frame arrives on a port or transmitted by the bridge, if we have VLANs configured, validate that a given VLAN is allowed to enter the bridge. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* eth: Make is_link_local() consistent with other address testsBen Hutchings2012-11-021-1/+1
| | | | | | | | | | Function name should include '_ether_addr'. Return type should be bool. Parameter name should be 'addr' not 'dest' (also matching kernel-doc). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net, ixgbe: handle link local multicast addresses in SR-IOV modeJohn Fastabend2012-10-291-15/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In SR-IOV mode the PF driver acts as the uplink port and is used to send control packets e.g. lldpad, stp, etc. eth0.1 eth0.2 eth0 VF VF PF | | | <-- stand-in for uplink | | | -------------------------- | Embedded Switch | -------------------------- | MAC <-- uplink But the embedded switch is setup to forward multicast addresses to all interfaces both VFs and PF and onto the physical link. This results in reserved MAC addresses used by control protocols to be forwarded over the switch onto the VF. In the LLDP case the PF sends an LLDPDU and it is currently being forwarded to all the VFs who then see the PF as a peer. This is incorrect. This patch adds the multicast addresses to the RAR table in the hardware to prevent this behavior. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* bridge: Convert compare_ether_addr to ether_addr_equalJoe Perches2012-05-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modulesPaul Gortmaker2011-10-311-0/+1
| | | | | | | | | These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
View Lorry Controller Status