summaryrefslogtreecommitdiff
path: root/net/sctp
Commit message (Collapse)AuthorAgeFilesLines
* sctp: kfree_rcu asocXin Long2018-12-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit fb6df5a6234c38a9c551559506a49a677ac6f07a ] In sctp_hash_transport/sctp_epaddr_lookup_transport, it dereferences a transport's asoc under rcu_read_lock while asoc is freed not after a grace period, which leads to a use-after-free panic. This patch fixes it by calling kfree_rcu to make asoc be freed after a grace period. Note that only the asoc's memory is delayed to free in the patch, it won't cause sk to linger longer. Thanks Neil and Marcelo to make this clear. Fixes: 7fda702f9315 ("sctp: use new rhlist interface on sctp transport rhashtable") Fixes: cd2b70875058 ("sctp: check duplicate node before inserting a new transport") Reported-by: syzbot+0b05d8aa7cb185107483@syzkaller.appspotmail.com Reported-by: syzbot+aad231d51b1923158444@syzkaller.appspotmail.com Suggested-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: clear the transport of some out_chunk_list chunks in sctp_assoc_rm_peerXin Long2018-12-011-3/+7
| | | | | | | | | | | | | | | | | | commit df132eff463873e14e019a07f387b4d577d6d1f9 upstream. If a transport is removed by asconf but there still are some chunks with this transport queuing on out_chunk_list, later an use-after-free issue will be caused when accessing this transport from these chunks in sctp_outq_flush(). This is an old bug, we fix it by clearing the transport of these chunks in out_chunk_list when removing a transport in sctp_assoc_rm_peer(). Reported-by: syzbot+56a40ceee5fb35932f4d@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: not increase stream's incnt before sending addstrm_in requestXin Long2018-11-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit e1e46479847e66f78f79d8c24d5169a5954b3fc2 ] Different from processing the addstrm_out request, The receiver handles an addstrm_in request by sending back an addstrm_out request to the sender who will increase its stream's in and incnt later. Now stream->incnt has been increased since it sent out the addstrm_in request in sctp_send_add_streams(), with the wrong stream->incnt will even cause crash when copying stream info from the old stream's in to the new one's in sctp_process_strreset_addstrm_out(). This patch is to fix it by simply removing the stream->incnt change from sctp_send_add_streams(). Fixes: 242bd2d519d7 ("sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter") Reported-by: Jianwen Ji <jiji@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: not allow to set asoc prsctp_enable by sockoptXin Long2018-11-231-21/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit cc3ccf26f0649089b3a34a2781977755ea36e72c ] As rfc7496#section4.5 says about SCTP_PR_SUPPORTED: This socket option allows the enabling or disabling of the negotiation of PR-SCTP support for future associations. For existing associations, it allows one to query whether or not PR-SCTP support was negotiated on a particular association. It means only sctp sock's prsctp_enable can be set. Note that for the limitation of SCTP_{CURRENT|ALL}_ASSOC, we will add it when introducing SCTP_{FUTURE|CURRENT|ALL}_ASSOC for linux sctp in another patchset. v1->v2: - drop the params.assoc_id check as Neil suggested. Fixes: 28aa4c26fce2 ("sctp: add SCTP_PR_SUPPORTED on sctp sockopt") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: fix race on sctp_id2asocMarcelo Ricardo Leitner2018-11-041-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit b336decab22158937975293aea79396525f92bb3 ] syzbot reported an use-after-free involving sctp_id2asoc. Dmitry Vyukov helped to root cause it and it is because of reading the asoc after it was freed: CPU 1 CPU 2 (working on socket 1) (working on socket 2) sctp_association_destroy sctp_id2asoc spin lock grab the asoc from idr spin unlock spin lock remove asoc from idr spin unlock free(asoc) if asoc->base.sk != sk ... [*] This can only be hit if trying to fetch asocs from different sockets. As we have a single IDR for all asocs, in all SCTP sockets, their id is unique on the system. An application can try to send stuff on an id that matches on another socket, and the if in [*] will protect from such usage. But it didn't consider that as that asoc may belong to another socket, it may be freed in parallel (read: under another socket lock). We fix it by moving the checks in [*] into the protected region. This fixes it because the asoc cannot be freed while the lock is held. Reported-by: syzbot+c7dd55d7aec49d48e49a@syzkaller.appspotmail.com Acked-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: update dst pmtu with the correct daddrXin Long2018-10-181-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit d7ab5cdce54da631f0c8c11e506c974536a3581e ] When processing pmtu update from an icmp packet, it calls .update_pmtu with sk instead of skb in sctp_transport_update_pmtu. However for sctp, the daddr in the transport might be different from inet_sock->inet_daddr or sk->sk_v6_daddr, which is used to update or create the route cache. The incorrect daddr will cause a different route cache created for the path. So before calling .update_pmtu, inet_sock->inet_daddr/sk->sk_v6_daddr should be updated with the daddr in the transport, and update it back after it's done. The issue has existed since route exceptions introduction. Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.") Reported-by: ian.periam@dialogic.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: hold transport before accessing its asoc in sctp_transport_get_nextXin Long2018-09-152-11/+15
| | | | | | | | | | | | | | | | | | | | [ Upstream commit bab1be79a5169ac748d8292b20c86d874022d7ba ] As Marcelo noticed, in sctp_transport_get_next, it is iterating over transports but then also accessing the association directly, without checking any refcnts before that, which can cause an use-after-free Read. So fix it by holding transport before accessing the association. With that, sctp_transport_hold calls can be removed in the later places. Fixes: 626d16f50f39 ("sctp: export some apis or variables for sctp_diag and reuse some for proc") Reported-by: syzbot+fe62a0c9aa6a85c6de16@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: fix erroneous inc of snmp SctpFragUsrMsgsMarcelo Ricardo Leitner2018-08-241-1/+3
| | | | | | | | | | | | | | | | | [ Upstream commit fedb1bd3d274b33c432cb83c80c6b3cf54d509c8 ] Currently it is incrementing SctpFragUsrMsgs when the user message size is of the exactly same size as the maximum fragment size, which is wrong. The fix is to increment it only when user message is bigger than the maximum fragment size. Fixes: bfd2e4b8734d ("sctp: refactor sctp_datamsg_from_user") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: not allow transport timeout value less than HZ/5 for hb_timerXin Long2018-06-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 1d88ba1ebb2763aa86172cd7ca05dedbeccc0d35 ] syzbot reported a rcu_sched self-detected stall on CPU which is caused by too small value set on rto_min with SCTP_RTOINFO sockopt. With this value, hb_timer will get stuck there, as in its timer handler it starts this timer again with this value, then goes to the timer handler again. This problem is there since very beginning, and thanks to Eric for the reproducer shared from a syzbot mail. This patch fixes it by not allowing sctp_transport_timeout to return a smaller value than HZ/5 for hb_timer, which is based on TCP's min rto. Note that it doesn't fix this issue by limiting rto_min, as some users are still using small rto and no proper value was found for it yet. Reported-by: syzbot+3dcd59a1f907245f891f@syzkaller.appspotmail.com Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: use the old asoc when making the cookie-ack chunk in dupcook_dXin Long2018-05-191-1/+1
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 46e16d4b956867013e0bbd7f2bad206f4aa55752 ] When processing a duplicate cookie-echo chunk, for case 'D', sctp will not process the param from this chunk. It means old asoc has nothing to be updated, and the new temp asoc doesn't have the complete info. So there's no reason to use the new asoc when creating the cookie-ack chunk. Otherwise, like when auth is enabled for cookie-ack, the chunk can not be set with auth, and it will definitely be dropped by peer. This issue is there since very beginning, and we fix it by using the old asoc instead. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: remove sctp_chunk_put from fail_mark err path in sctp_ulpevent_make_rcvmsgXin Long2018-05-191-1/+0
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 6910e25de2257e2c82c7a2d126e3463cd8e50810 ] In Commit 1f45f78f8e51 ("sctp: allow GSO frags to access the chunk too"), it held the chunk in sctp_ulpevent_make_rcvmsg to access it safely later in recvmsg. However, it also added sctp_chunk_put in fail_mark err path, which is only triggered before holding the chunk. syzbot reported a use-after-free crash happened on this err path, where it shouldn't call sctp_chunk_put. This patch simply removes this call. Fixes: 1f45f78f8e51 ("sctp: allow GSO frags to access the chunk too") Reported-by: syzbot+141d898c5f24489db4aa@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: handle two v4 addrs comparison in sctp_inet6_cmp_addrXin Long2018-05-191-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit d625329b06e46bd20baf9ee40847d11982569204 ] Since sctp ipv6 socket also supports v4 addrs, it's possible to compare two v4 addrs in pf v6 .cmp_addr, sctp_inet6_cmp_addr. However after Commit 1071ec9d453a ("sctp: do not check port in sctp_inet6_cmp_addr"), it no longer calls af1->cmp_addr, which in this case is sctp_v4_cmp_addr, but calls __sctp_v6_cmp_addr where it handles them as two v6 addrs. It would cause a out of bounds crash. syzbot found this crash when trying to bind two v4 addrs to a v6 socket. This patch fixes it by adding the process for two v4 addrs in sctp_inet6_cmp_addr. Fixes: 1071ec9d453a ("sctp: do not check port in sctp_inet6_cmp_addr") Reported-by: syzbot+cd494c1dd681d4d93ebb@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: fix the issue that the cookie-ack with auth can't get processedXin Long2018-05-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit ce402f044e4e432c296f90eaabb8dbe8f3624391 ] When auth is enabled for cookie-ack chunk, in sctp_inq_pop, sctp processes auth chunk first, then continues to the next chunk in this packet if chunk_end + chunk_hdr size < skb_tail_pointer(). Otherwise, it will go to the next packet or discard this chunk. However, it missed the fact that cookie-ack chunk's size is equal to chunk_hdr size, which couldn't match that check, and thus this chunk would not get processed. This patch fixes it by changing the check to chunk_end + chunk_hdr size <= skb_tail_pointer(). Fixes: 26b87c788100 ("net: sctp: fix remote memory pressure from excessive queueing") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: delay the authentication for the duplicated cookie-echo chunkXin Long2018-05-192-41/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 59d8d4434f429b4fa8a346fd889058bda427a837 ] Now sctp only delays the authentication for the normal cookie-echo chunk by setting chunk->auth_chunk in sctp_endpoint_bh_rcv(). But for the duplicated one with auth, in sctp_assoc_bh_rcv(), it does authentication first based on the old asoc, which will definitely fail due to the different auth info in the old asoc. The duplicated cookie-echo chunk will create a new asoc with the auth info from this chunk, and the authentication should also be done with the new asoc's auth info for all of the collision 'A', 'B' and 'D'. Otherwise, the duplicated cookie-echo chunk with auth will never pass the authentication and create the new connection. This issue exists since very beginning, and this fix is to make sctp_assoc_bh_rcv() follow the way sctp_endpoint_bh_rcv() does for the normal cookie-echo chunk to delay the authentication. While at it, remove the unused params from sctp_sf_authenticate() and define sctp_auth_chunk_verify() used for all the places that do the delayed authentication. v1->v2: fix the typo in changelog as Marcelo noticed. Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: do not check port in sctp_inet6_cmp_addrXin Long2018-04-291-30/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 1071ec9d453a38023579714b64a951a2fb982071 ] pf->cmp_addr() is called before binding a v6 address to the sock. It should not check ports, like in sctp_inet_cmp_addr. But sctp_inet6_cmp_addr checks the addr by invoking af(6)->cmp_addr, sctp_v6_cmp_addr where it also compares the ports. This would cause that setsockopt(SCTP_SOCKOPT_BINDX_ADD) could bind multiple duplicated IPv6 addresses after Commit 40b4f0fd74e4 ("sctp: lack the check for ports in sctp_v6_cmp_addr"). This patch is to remove af->cmp_addr called in sctp_inet6_cmp_addr, but do the proper check for both v6 addrs and v4mapped addrs. v1->v2: - define __sctp_v6_cmp_addr to do the common address comparison used for both pf and af v6 cmp_addr. Fixes: 40b4f0fd74e4 ("sctp: lack the check for ports in sctp_v6_cmp_addr") Reported-by: Jianwen Ji <jiji@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: sctp_sockaddr_af must check minimal addr length for AF_INET6Eric Dumazet2018-04-121-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 81e98370293afcb58340ce8bd71af7b97f925c26 ] Check must happen before call to ipv6_addr_v4mapped() syzbot report was : BUG: KMSAN: uninit-value in sctp_sockaddr_af net/sctp/socket.c:359 [inline] BUG: KMSAN: uninit-value in sctp_do_bind+0x60f/0xdc0 net/sctp/socket.c:384 CPU: 0 PID: 3576 Comm: syzkaller968804 Not tainted 4.16.0+ #82 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 sctp_sockaddr_af net/sctp/socket.c:359 [inline] sctp_do_bind+0x60f/0xdc0 net/sctp/socket.c:384 sctp_bind+0x149/0x190 net/sctp/socket.c:332 inet6_bind+0x1fd/0x1820 net/ipv6/af_inet6.c:293 SYSC_bind+0x3f2/0x4b0 net/socket.c:1474 SyS_bind+0x54/0x80 net/socket.c:1460 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x43fd49 RSP: 002b:00007ffe99df3d28 EFLAGS: 00000213 ORIG_RAX: 0000000000000031 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fd49 RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000004002c8 R11: 0000000000000213 R12: 0000000000401670 R13: 0000000000401700 R14: 0000000000000000 R15: 0000000000000000 Local variable description: ----address@SYSC_bind Variable was created at: SYSC_bind+0x6f/0x4b0 net/socket.c:1461 SyS_bind+0x54/0x80 net/socket.c:1460 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: do not leak kernel memory to user spaceEric Dumazet2018-04-121-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 6780db244d6b1537d139dea0ec8aad10cf9e4adb ] syzbot produced a nice report [1] Issue here is that a recvmmsg() managed to leak 8 bytes of kernel memory to user space, because sin_zero (padding field) was not properly cleared. [1] BUG: KMSAN: uninit-value in copy_to_user include/linux/uaccess.h:184 [inline] BUG: KMSAN: uninit-value in move_addr_to_user+0x32e/0x530 net/socket.c:227 CPU: 1 PID: 3586 Comm: syzkaller481044 Not tainted 4.16.0+ #82 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 kmsan_internal_check_memory+0x164/0x1d0 mm/kmsan/kmsan.c:1176 kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199 copy_to_user include/linux/uaccess.h:184 [inline] move_addr_to_user+0x32e/0x530 net/socket.c:227 ___sys_recvmsg+0x4e2/0x810 net/socket.c:2211 __sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313 SYSC_recvmmsg+0x29b/0x3e0 net/socket.c:2394 SyS_recvmmsg+0x76/0xa0 net/socket.c:2378 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x4401c9 RSP: 002b:00007ffc56f73098 EFLAGS: 00000217 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401c9 RDX: 0000000000000001 RSI: 0000000020003ac0 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000020003bc0 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000217 R12: 0000000000401af0 R13: 0000000000401b80 R14: 0000000000000000 R15: 0000000000000000 Local variable description: ----addr@___sys_recvmsg Variable was created at: ___sys_recvmsg+0xd5/0x810 net/socket.c:2172 __sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313 Bytes 8-15 of 16 are uninitialized ================================================================== Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 3586 Comm: syzkaller481044 Tainted: G B 4.16.0+ #82 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 panic+0x39d/0x940 kernel/panic.c:183 kmsan_report+0x238/0x240 mm/kmsan/kmsan.c:1083 kmsan_internal_check_memory+0x164/0x1d0 mm/kmsan/kmsan.c:1176 kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199 copy_to_user include/linux/uaccess.h:184 [inline] move_addr_to_user+0x32e/0x530 net/socket.c:227 ___sys_recvmsg+0x4e2/0x810 net/socket.c:2211 __sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313 SYSC_recvmmsg+0x29b/0x3e0 net/socket.c:2394 SyS_recvmmsg+0x76/0xa0 net/socket.c:2378 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: fix dst refcnt leak in sctp_v6_get_dst()Alexey Kodanev2018-03-081-3/+7
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 957d761cf91cdbb175ad7d8f5472336a4d54dbf2 ] When going through the bind address list in sctp_v6_get_dst() and the previously found address is better ('matchlen > bmatchlen'), the code continues to the next iteration without releasing currently held destination. Fix it by releasing 'bdst' before continue to the next iteration, and instead of introducing one more '!IS_ERR(bdst)' check for dst_release(), move the already existed one right after ip6_dst_lookup_flow(), i.e. we shouldn't proceed further if we get an error for the route lookup. Fixes: dbc2b5e9a09e ("sctp: fix src address selection if using secondary addresses for ipv6") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: do not pr_err for the duplicated node in transport rhlistXin Long2018-03-081-4/+1
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit 27af86bb038d9c8b8066cd17854ddaf2ea92bce1 ] The pr_err in sctp_hash_transport was supposed to report a sctp bug for using rhashtable/rhlist. The err '-EEXIST' introduced in Commit cd2b70875058 ("sctp: check duplicate node before inserting a new transport") doesn't belong to that case. So just return -EEXIST back without pr_err any kmsg. Fixes: cd2b70875058 ("sctp: check duplicate node before inserting a new transport") Reported-by: Wei Chen <weichen@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: fix dst refcnt leak in sctp_v4_get_dstTommi Rantala2018-03-081-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 4a31a6b19f9ddf498c81f5c9b089742b7472a6f8 ] Fix dst reference count leak in sctp_v4_get_dst() introduced in commit 410f03831 ("sctp: add routing output fallback"): When walking the address_list, successive ip_route_output_key() calls may return the same rt->dst with the reference incremented on each call. The code would not decrement the dst refcount when the dst pointer was identical from the previous iteration, causing the dst refcnt leak. Testcase: ip netns add TEST ip netns exec TEST ip link set lo up ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add dummy2 type dummy ip link set dev dummy0 netns TEST ip link set dev dummy1 netns TEST ip link set dev dummy2 netns TEST ip netns exec TEST ip addr add 192.168.1.1/24 dev dummy0 ip netns exec TEST ip link set dummy0 up ip netns exec TEST ip addr add 192.168.1.2/24 dev dummy1 ip netns exec TEST ip link set dummy1 up ip netns exec TEST ip addr add 192.168.1.3/24 dev dummy2 ip netns exec TEST ip link set dummy2 up ip netns exec TEST sctp_test -H 192.168.1.2 -P 20002 -h 192.168.1.1 -p 20000 -s -B 192.168.1.3 ip netns del TEST In 4.4 and 4.9 kernels this results to: [ 354.179591] unregister_netdevice: waiting for lo to become free. Usage count = 1 [ 364.419674] unregister_netdevice: waiting for lo to become free. Usage count = 1 [ 374.663664] unregister_netdevice: waiting for lo to become free. Usage count = 1 [ 384.903717] unregister_netdevice: waiting for lo to become free. Usage count = 1 [ 395.143724] unregister_netdevice: waiting for lo to become free. Usage count = 1 [ 405.383645] unregister_netdevice: waiting for lo to become free. Usage count = 1 ... Fixes: 410f03831 ("sctp: add routing output fallback") Fixes: 0ca50d12f ("sctp: fix src address selection if using secondary addresses") Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: verify size of a new chunk in _sctp_make_chunk()Alexey Kodanev2018-03-081-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 07f2c7ab6f8d0a7e7c5764c4e6cc9c52951b9d9c ] When SCTP makes INIT or INIT_ACK packet the total chunk length can exceed SCTP_MAX_CHUNK_LEN which leads to kernel panic when transmitting these packets, e.g. the crash on sending INIT_ACK: [ 597.804948] skbuff: skb_over_panic: text:00000000ffae06e4 len:120168 put:120156 head:000000007aa47635 data:00000000d991c2de tail:0x1d640 end:0xfec0 dev:<NULL> ... [ 597.976970] ------------[ cut here ]------------ [ 598.033408] kernel BUG at net/core/skbuff.c:104! [ 600.314841] Call Trace: [ 600.345829] <IRQ> [ 600.371639] ? sctp_packet_transmit+0x2095/0x26d0 [sctp] [ 600.436934] skb_put+0x16c/0x200 [ 600.477295] sctp_packet_transmit+0x2095/0x26d0 [sctp] [ 600.540630] ? sctp_packet_config+0x890/0x890 [sctp] [ 600.601781] ? __sctp_packet_append_chunk+0x3b4/0xd00 [sctp] [ 600.671356] ? sctp_cmp_addr_exact+0x3f/0x90 [sctp] [ 600.731482] sctp_outq_flush+0x663/0x30d0 [sctp] [ 600.788565] ? sctp_make_init+0xbf0/0xbf0 [sctp] [ 600.845555] ? sctp_check_transmitted+0x18f0/0x18f0 [sctp] [ 600.912945] ? sctp_outq_tail+0x631/0x9d0 [sctp] [ 600.969936] sctp_cmd_interpreter.isra.22+0x3be1/0x5cb0 [sctp] [ 601.041593] ? sctp_sf_do_5_1B_init+0x85f/0xc30 [sctp] [ 601.104837] ? sctp_generate_t1_cookie_event+0x20/0x20 [sctp] [ 601.175436] ? sctp_eat_data+0x1710/0x1710 [sctp] [ 601.233575] sctp_do_sm+0x182/0x560 [sctp] [ 601.284328] ? sctp_has_association+0x70/0x70 [sctp] [ 601.345586] ? sctp_rcv+0xef4/0x32f0 [sctp] [ 601.397478] ? sctp6_rcv+0xa/0x20 [sctp] ... Here the chunk size for INIT_ACK packet becomes too big, mostly because of the state cookie (INIT packet has large size with many address parameters), plus additional server parameters. Later this chunk causes the panic in skb_put_data(): skb_packet_transmit() sctp_packet_pack() skb_put_data(nskb, chunk->skb->data, chunk->skb->len); 'nskb' (head skb) was previously allocated with packet->size from u16 'chunk->chunk_hdr->length'. As suggested by Marcelo we should check the chunk's length in _sctp_make_chunk() before trying to allocate skb for it and discard a chunk if its size bigger than SCTP_MAX_CHUNK_LEN. Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leinter@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: make use of pre-calculated lenMarcelo Ricardo Leitner2018-03-031-6/+10
| | | | | | | | | | | | | | | | | | [ Upstream commit c76f97c99ae6d26d14c7f0e50e074382bfbc9f98 ] Some sockopt handling functions were calculating the length of the buffer to be written to userspace and then calculating it again when actually writing the buffer, which could lead to some write not using an up-to-date length. This patch updates such places to just make use of the len variable. Also, replace some sizeof(type) to sizeof(var). Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: add a ceiling to optlen in some sockoptsMarcelo Ricardo Leitner2018-03-031-0/+10
| | | | | | | | | | | | | | | | | | [ Upstream commit 5960cefab9df76600a1a7d4ff592c59e14616e88 ] Hangbin Liu reported that some sockopt calls could cause the kernel to log a warning on memory allocation failure if the user supplied a large optlen value. That is because some of them called memdup_user() without a ceiling on optlen, allowing it to try to allocate really large buffers. This patch adds a ceiling by limiting optlen to the maximum allowed that would still make sense for these sockopt. Reported-by: Hangbin Liu <haliu@redhat.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: fix the issue that a __u16 variable may overflow in sctp_ulpq_renegeXin Long2018-03-031-16/+8
| | | | | | | | | | | | | | | | | | | [ Upstream commit 5c468674d17056148da06218d4da5d04baf22eac ] Now when reneging events in sctp_ulpq_renege(), the variable freed could be increased by a __u16 value twice while freed is of __u16 type. It means freed may overflow at the second addition. This patch is to fix it by using __u32 type for 'freed', while at it, also to remove 'if (chunk)' check, as all renege commands are generated in sctp_eat_data and it can't be NULL. Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: only update outstanding_bytes for transmitted queue when doing ↵Xin Long2018-02-251-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | prsctp_prune [ Upstream commit d30fc5126efb0c33b7adf5966d3051db2c3d7721 ] Now outstanding_bytes is only increased when appending chunks into one packet and sending it at 1st time, while decreased when it is about to move into retransmit queue. It means outstanding_bytes value is already decreased for all chunks in retransmit queue. However sctp_prsctp_prune_sent is a common function to check the chunks in both transmitted and retransmit queue, it decrease outstanding_bytes when moving a chunk into abandoned queue from either of them. It could cause outstanding_bytes underflow, as it also decreases it's value for the chunks in retransmit queue. This patch fixes it by only updating outstanding_bytes for transmitted queue when pruning queues for prsctp prio policy, the same fix is also needed in sctp_check_transmitted. Fixes: 8dbdf1f5b09c ("sctp: implement prsctp PRIO policy") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: set frag_point in sctp_setsockopt_maxseg correctlyXin Long2018-02-251-10/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit ecca8f88da5c4260cc2bccfefd2a24976704c366 upstream. Now in sctp_setsockopt_maxseg user_frag or frag_point can be set with val >= 8 and val <= SCTP_MAX_CHUNK_LEN. But both checks are incorrect. val >= 8 means frag_point can even be less than SCTP_DEFAULT_MINSEGMENT. Then in sctp_datamsg_from_user(), when it's value is greater than cookie echo len and trying to bundle with cookie echo chunk, the first_len will overflow. The worse case is when it's value is equal as cookie echo len, first_len becomes 0, it will go into a dead loop for fragment later on. In Hangbin syzkaller testing env, oom was even triggered due to consecutive memory allocation in that loop. Besides, SCTP_MAX_CHUNK_LEN is the max size of the whole chunk, it should deduct the data header for frag_point or user_frag check. This patch does a proper check with SCTP_DEFAULT_MINSEGMENT subtracting the sctphdr and datahdr, SCTP_MAX_CHUNK_LEN subtracting datahdr when setting frag_point via sockopt. It also improves sctp_setsockopt_maxseg codes. Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: set sender next_tsn for the old result with ctsn_ack_point plus 1Xin Long2018-02-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 52a395896a051a3d5c34fba67c324f69ec5e67c6 ] When doing asoc reset, if the sender of the response has already sent some chunk and increased asoc->next_tsn before the duplicate request comes, the response will use the old result with an incorrect sender next_tsn. Better than asoc->next_tsn, asoc->ctsn_ack_point can't be changed after the sender of the response has performed the asoc reset and before the peer has confirmed it, and it's value is still asoc->next_tsn original value minus 1. This patch sets sender next_tsn for the old result with ctsn_ack_point plus 1 when processing the duplicate request, to make sure the sender next_tsn value peer gets will be always right. Fixes: 692787cef651 ("sctp: implement receiver-side procedures for the SSN/TSN Reset Request Parameter") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: avoid flushing unsent queue when doing asoc resetXin Long2018-02-031-7/+14
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 159f2a7456c6ae95c1e1a58e8b8ec65ef12d51cf ] Now when doing asoc reset, it cleans up sacked and abandoned queues by calling sctp_outq_free where it also cleans up unsent, retransmit and transmitted queues. It's safe for the sender of response, as these 3 queues are empty at that time. But when the receiver of response is doing the reset, the users may already enqueue some chunks into unsent during the time waiting the response, and these chunks should not be flushed. To void the chunks in it would be removed, it moves the queue into a temp list, then gets it back after sctp_outq_free is done. The patch also fixes some incorrect comments in sctp_process_strreset_tsnreq. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: only allow the asoc reset when the asoc outq is emptyXin Long2018-02-031-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 5c6144a0eb5366ae07fc5059301b139338f39bbd ] As it says in rfc6525#section5.1.4, before sending the request, C2: The sender has either no outstanding TSNs or considers all outstanding TSNs abandoned. Prior to this patch, it tried to consider all outstanding TSNs abandoned by dropping all chunks in all outqs with sctp_outq_free (even including sacked, retransmit and transmitted queues) when doing this reset, which is too aggressive. To make it work gently, this patch will only allow the asoc reset when the sender has no outstanding TSNs by checking if unsent, transmitted and retransmit are all empty with sctp_outq_is_empty before sending and processing the request. Fixes: 692787cef651 ("sctp: implement receiver-side procedures for the SSN/TSN Reset Request Parameter") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: reinit stream if stream outcnt has been change by sinit in sendmsgXin Long2018-01-311-2/+8
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 625637bf4afa45204bd87e4218645182a919485a ] After introducing sctp_stream structure, sctp uses stream->outcnt as the out stream nums instead of c.sinit_num_ostreams. However when users use sinit in cmsg, it only updates c.sinit_num_ostreams in sctp_sendmsg. At that moment, stream->outcnt is still using previous value. If it's value is not updated, the sinit_num_ostreams of sinit could not really work. This patch is to fix it by updating stream->outcnt and reiniting stream if stream outcnt has been change by sinit in sendmsg. Fixes: a83863174a61 ("sctp: prepare asoc stream for stream reconf") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* gso: validate gso_type in GSO handlersWillem de Bruijn2018-01-311-0/+3
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 121d57af308d0cf943f08f4738d24d3966c38cd9 ] Validate gso_type during segmentation as SKB_GSO_DODGY sources may pass packets where the gso_type does not match the contents. Syzkaller was able to enter the SCTP gso handler with a packet of gso_type SKB_GSO_TCPV4. On entry of transport layer gso handlers, verify that the gso_type matches the transport protocol. Fixes: 90017accff61 ("sctp: Add GSO support") Link: http://lkml.kernel.org/r/<001a1137452496ffc305617e5fe0@google.com> Reported-by: syzbot+fee64147a25aecd48055@syzkaller.appspotmail.com Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: return error if the asoc has been peeled off in sctp_wait_for_sndbufXin Long2018-01-311-10/+6
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit a0ff660058b88d12625a783ce9e5c1371c87951f ] After commit cea0cc80a677 ("sctp: use the right sk after waking up from wait_buf sleep"), it may change to lock another sk if the asoc has been peeled off in sctp_wait_for_sndbuf. However, the asoc's new sk could be already closed elsewhere, as it's in the sendmsg context of the old sk that can't avoid the new sk's closing. If the sk's last one refcnt is held by this asoc, later on after putting this asoc, the new sk will be freed, while under it's own lock. This patch is to revert that commit, but fix the old issue by returning error under the old sk's lock. Fixes: cea0cc80a677 ("sctp: use the right sk after waking up from wait_buf sleep") Reported-by: syzbot+ac6ea7baa4432811eb50@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: do not allow the v4 socket to bind a v4mapped v6 addressXin Long2018-01-311-8/+6
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit c5006b8aa74599ce19104b31d322d2ea9ff887cc ] The check in sctp_sockaddr_af is not robust enough to forbid binding a v4mapped v6 addr on a v4 socket. The worse thing is that v4 socket's bind_verify would not convert this v4mapped v6 addr to a v4 addr. syzbot even reported a crash as the v4 socket bound a v6 addr. This patch is to fix it by doing the common sa.sa_family check first, then AF_INET check for v4mapped v6 addrs. Fixes: 7dab83de50c7 ("sctp: Support ipv6only AF_INET6 sockets.") Reported-by: syzbot+7b7b518b1228d2743963@syzkaller.appspotmail.com Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: fix the handling of ICMP Frag Needed for too small MTUsMarcelo Ricardo Leitner2018-01-172-12/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit b6c5734db07079c9410147b32407f2366d584e6c ] syzbot reported a hang involving SCTP, on which it kept flooding dmesg with the message: [ 246.742374] sctp: sctp_transport_update_pmtu: Reported pmtu 508 too low, using default minimum of 512 That happened because whenever SCTP hits an ICMP Frag Needed, it tries to adjust to the new MTU and triggers an immediate retransmission. But it didn't consider the fact that MTUs smaller than the SCTP minimum MTU allowed (512) would not cause the PMTU to change, and issued the retransmission anyway (thus leading to another ICMP Frag Needed, and so on). As IPv4 (ip_rt_min_pmtu=556) and IPv6 (IPV6_MIN_MTU=1280) minimum MTU are higher than that, sctp_transport_update_pmtu() is changed to re-fetch the PMTU that got set after our request, and with that, detect if there was an actual change or not. The fix, thus, skips the immediate retransmission if the received ICMP resulted in no change, in the hope that SCTP will select another path. Note: The value being used for the minimum MTU (512, SCTP_DEFAULT_MINSEGMENT) is not right and instead it should be (576, SCTP_MIN_PMTU), but such change belongs to another patch. Changes from v1: - do not disable PMTU discovery, in the light of commit 06ad391919b2 ("[SCTP] Don't disable PMTU discovery when mtu is small") and as suggested by Xin Long. - changed the way to break the rtx loop by detecting if the icmp resulted in a change or not Changes from v2: none See-also: https://lkml.org/lkml/2017/12/22/811 Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: do not retransmit upon FragNeeded if PMTU discovery is disabledMarcelo Ricardo Leitner2018-01-171-12/+12
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit cc35c3d1edf7a8373a1a5daa80a912dec96a9cd5 ] Currently, if PMTU discovery is disabled on a given transport, but the configured value is higher than the actual PMTU, it is likely that we will get some icmp Frag Needed. The issue is, if PMTU discovery is disabled, we won't update the information and will issue a retransmission immediately, which may very well trigger another ICMP, and another retransmission, leading to a loop. The fix is to simply not trigger immediate retransmissions if PMTU discovery is disabled on the given transport. Changes from v2: - updated stale comment, noticed by Xin Long Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: make sure stream nums can match optlen in sctp_setsockopt_reset_streamsXin Long2018-01-021-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 2342b8d95bcae5946e1b9b8d58645f37500ef2e7 ] Now in sctp_setsockopt_reset_streams, it only does the check optlen < sizeof(*params) for optlen. But it's not enough, as params->srs_number_streams should also match optlen. If the streams in params->srs_stream_list are less than stream nums in params->srs_number_streams, later when dereferencing the stream list, it could cause a slab-out-of-bounds crash, as reported by syzbot. This patch is to fix it by also checking the stream numbers in sctp_setsockopt_reset_streams to make sure at least it's not greater than the streams in the list. Fixes: 7f9d68ac944e ("sctp: implement sender-side procedures for SSN Reset Request Parameter") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: Replace use of sockets_allocated with specified macro.Tonghao Zhang2018-01-021-2/+2
| | | | | | | | | | | | | | | [ Upstream commit 8cb38a602478e9f806571f6920b0a3298aabf042 ] The patch(180d8cd942ce) replaces all uses of struct sock fields' memory_pressure, memory_allocated, sockets_allocated, and sysctl_mem to accessor macros. But the sockets_allocated field of sctp sock is not replaced at all. Then replace it now for unifying the code. Fixes: 180d8cd942ce ("foundations of per-cgroup memory pressure controlling.") Cc: Glauber Costa <glommer@parallels.com> Signed-off-by: Tonghao Zhang <zhangtonghao@didichuxing.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: silence warns on sctp_stream_init allocationsMarcelo Ricardo Leitner2017-12-251-1/+7
| | | | | | | | | | | | | | | | | | | [ Upstream commit 1ae2eaaa229bc350b6f38fbf4ab9c873532aecfb ] As SCTP supports up to 65535 streams, that can lead to very large allocations in sctp_stream_init(). As Xin Long noticed, systems with small amounts of memory are more prone to not have enough memory and dump warnings on dmesg initiated by user actions. Thus, silence them. Also, if the reallocation of stream->out is not necessary, skip it and keep the memory we already have. Reported-by: Xin Long <lucien.xin@gmail.com> Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: use right member as the param of list_for_each_entryXin Long2017-12-171-3/+3
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit a8dd397903a6e57157f6265911f7d35681364427 ] Commit d04adf1b3551 ("sctp: reset owner sk for data chunks on out queues when migrating a sock") made a mistake that using 'list' as the param of list_for_each_entry to traverse the retransmit, sacked and abandoned queues, while chunks are using 'transmitted_list' to link into these queues. It could cause NULL dereference panic if there are chunks in any of these queues when peeling off one asoc. So use the chunk member 'transmitted_list' instead in this patch. Fixes: d04adf1b3551 ("sctp: reset owner sk for data chunks on out queues when migrating a sock") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: use the right sk after waking up from wait_buf sleepXin Long2017-12-141-10/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit cea0cc80a6777beb6eb643d4ad53690e1ad1d4ff ] Commit dfcb9f4f99f1 ("sctp: deny peeloff operation on asocs with threads sleeping on it") fixed the race between peeloff and wait sndbuf by checking waitqueue_active(&asoc->wait) in sctp_do_peeloff(). But it actually doesn't work, as even if waitqueue_active returns false the waiting sndbuf thread may still not yet hold sk lock. After asoc is peeled off, sk is not asoc->base.sk any more, then to hold the old sk lock couldn't make assoc safe to access. This patch is to fix this by changing to hold the new sk lock if sk is not asoc->base.sk, meanwhile, also set the sk in sctp_sendmsg with the new sk. With this fix, there is no more race between peeloff and waitbuf, the check 'waitqueue_active' in sctp_do_peeloff can be removed. Thanks Marcelo and Neil for making this clear. v1->v2: fix it by changing to lock the new sock instead of adding a flag in asoc. Suggested-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sctp: do not free asoc when it is already dead in sctp_sendmsgXin Long2017-12-141-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit ca3af4dd28cff4e7216e213ba3b671fbf9f84758 ] Now in sctp_sendmsg sctp_wait_for_sndbuf could schedule out without holding sock sk. It means the current asoc can be freed elsewhere, like when receiving an abort packet. If the asoc is just created in sctp_sendmsg and sctp_wait_for_sndbuf returns err, the asoc will be freed again due to new_asoc is not nil. An use-after-free issue would be triggered by this. This patch is to fix it by setting new_asoc with nil if the asoc is already dead when cpu schedules back, so that it will not be freed again in sctp_sendmsg. v1->v2: set new_asoc as nil in sctp_sendmsg instead of sctp_wait_for_sndbuf. Suggested-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/sctp: Always set scope_id in sctp_inet6_skb_msgnameEric W. Biederman2017-11-241-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 7c8a61d9ee1df0fb4747879fa67a99614eb62fec ] Alexandar Potapenko while testing the kernel with KMSAN and syzkaller discovered that in some configurations sctp would leak 4 bytes of kernel stack. Working with his reproducer I discovered that those 4 bytes that are leaked is the scope id of an ipv6 address returned by recvmsg. With a little code inspection and a shrewd guess I discovered that sctp_inet6_skb_msgname only initializes the scope_id field for link local ipv6 addresses to the interface index the link local address pertains to instead of initializing the scope_id field for all ipv6 addresses. That is almost reasonable as scope_id's are meaniningful only for link local addresses. Set the scope_id in all other cases to 0 which is not a valid interface index to make it clear there is nothing useful in the scope_id field. There should be no danger of breaking userspace as the stack leak guaranteed that previously meaningless random data was being returned. Fixes: 372f525b495c ("SCTP: Resync with LKSCTP tree.") History-tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Reported-by: Alexander Potapenko <glider@google.com> Tested-by: Alexander Potapenko <glider@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds2017-11-021-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
| * License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | sctp: fix some type cast warnings introduced since very beginningXin Long2017-10-293-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These warnings were found by running 'make C=2 M=net/sctp/'. They are there since very beginning. Note after this patch, there still one warning left in sctp_outq_flush(): sctp_chunk_fail(chunk, SCTP_ERROR_INV_STRM) Since it has been moved to sctp_stream_outq_migrate on net-next, to avoid the extra job when merging net-next to net, I will post the fix for it after the merging is done. Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sctp: fix a type cast warnings that causes a_rwnd gets the wrong valueXin Long2017-10-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These warnings were found by running 'make C=2 M=net/sctp/'. Commit d4d6fb5787a6 ("sctp: Try not to change a_rwnd when faking a SACK from SHUTDOWN.") expected to use the peers old rwnd and add our flight size to the a_rwnd. But with the wrong Endian, it may not work as well as expected. So fix it by converting to the right value. Fixes: d4d6fb5787a6 ("sctp: Try not to change a_rwnd when faking a SACK from SHUTDOWN.") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sctp: fix some type cast warnings introduced by transport rhashtableXin Long2017-10-291-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | These warnings were found by running 'make C=2 M=net/sctp/'. They are introduced by not aware of Endian for the port when coding transport rhashtable patches. Fixes: 7fda702f9315 ("sctp: use new rhlist interface on sctp transport rhashtable") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sctp: fix some type cast warnings introduced by stream reconfXin Long2017-10-293-12/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These warnings were found by running 'make C=2 M=net/sctp/'. They are introduced by not aware of Endian when coding stream reconf patches. Since commit c0d8bab6ae51 ("sctp: add get and set sockopt for reconf_enable") enabled stream reconf feature for users, the Fixes tag below would use it. Fixes: c0d8bab6ae51 ("sctp: add get and set sockopt for reconf_enable") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sctp: reset owner sk for data chunks on out queues when migrating a sockXin Long2017-10-291-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now when migrating sock to another one in sctp_sock_migrate(), it only resets owner sk for the data in receive queues, not the chunks on out queues. It would cause that data chunks length on the sock is not consistent with sk sk_wmem_alloc. When closing the sock or freeing these chunks, the old sk would never be freed, and the new sock may crash due to the overflow sk_wmem_alloc. syzbot found this issue with this series: r0 = socket$inet_sctp() sendto$inet(r0) listen(r0) accept4(r0) close(r0) Although listen() should have returned error when one TCP-style socket is in connecting (I may fix this one in another patch), it could also be reproduced by peeling off an assoc. This issue is there since very beginning. This patch is to reset owner sk for the chunks on out queues so that sk sk_wmem_alloc has correct value after accept one sock or peeloff an assoc to one sock. Note that when resetting owner sk for chunks on outqueue, it has to sctp_clear_owner_w/skb_orphan chunks before changing assoc->base.sk first and then sctp_set_owner_w them after changing assoc->base.sk, due to that sctp_wfree and it's callees are using assoc->base.sk. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sctp: full support for ipv6 ip_nonlocal_bind & IP_FREEBINDLaszlo Toth2017-10-241-2/+4
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 9b9742022888 ("sctp: support ipv6 nonlocal bind") introduced support for the above options as v4 sctp did, so patched sctp_v6_available(). In the v4 implementation it's enough, because sctp_inet_bind_verify() just returns with sctp_v4_available(). However sctp_inet6_bind_verify() has an extra check before that for link-local scope_id, which won't respect the above options. Added the checks before calling ipv6_chk_addr(), but not before the validation of scope_id. before (w/ both options): ./v6test fe80::10 sctp bind failed, errno: 99 (Cannot assign requested address) ./v6test fe80::10 tcp bind success, errno: 0 (Success) after (w/ both options): ./v6test fe80::10 sctp bind success, errno: 0 (Success) Signed-off-by: Laszlo Toth <laszlth@gmail.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
View Lorry Controller Status