summaryrefslogtreecommitdiff
path: root/sound
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: hda - initialize audio InfoFrame to be all zeroMengdong Lin2014-07-281-0/+1
| | | | | | | | | | | | commit caaf5ef9493f72390905f1e97b310b8906d32dac upstream. This patch initialized the local audio InfoFrame variable 'ai' to be all zero, thus the data bytes will indicate "Refer to Stream Header" by default. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: hda - Fix broken PM due to incomplete i915 initializationTakashi Iwai2014-07-281-5/+5
| | | | | | | | | | | | | | | | | | | | commit 4da63c6fc426023d1a20e45508c47d7d68c6a53d upstream. When the initialization of Intel HDMI controller fails due to missing i915 kernel symbols (e.g. HD-audio is built in while i915 is module), the driver discontinues the probe. However, since the probe was done asynchronously, the driver object still remains, thus the relevant PM ops are still called at suspend/resume. This results in the bad access to the incomplete audio card object, eventually leads to Oops or stall at PM. This patch adds the missing checks of chip->init_failed flag at each PM callback in order to fix the problem above. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79561 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Prevent printk ratelimiting from spamming kernel log while ↵Sander Eikelenboom2014-07-091-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | DEBUG not defined commit b7a7723513dc89f83d6df13206df55d4dc26e825 upstream. This (widely used) construction: if(printk_ratelimit()) dev_dbg() Causes the ratelimiting to spam the kernel log with the "callbacks suppressed" message below, even while the dev_dbg it is supposed to rate limit wouldn't print anything because DEBUG is not defined for this device. [ 533.803964] retire_playback_urb: 852 callbacks suppressed [ 538.807930] retire_playback_urb: 852 callbacks suppressed [ 543.811897] retire_playback_urb: 852 callbacks suppressed [ 548.815745] retire_playback_urb: 852 callbacks suppressed [ 553.819826] retire_playback_urb: 852 callbacks suppressed So use dev_dbg_ratelimited() instead of this construction. Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Suppress repetitive debug messages from retire_playback_urb()Tim Gardner2014-07-091-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | commit a5065eb6da55b226661456e6a7435f605df98111 upstream. BugLink: http://bugs.launchpad.net/bugs/1305133 Malfunctioning or slow devices can cause a flood of dmesg SPAM. I've ignored checkpatch.pl complaints about the use of printk_ratelimit() in favour of prior art in sound/usb/pcm.c. WARNING: Prefer printk_ratelimited or pr_<level>_ratelimited to printk_ratelimit + if (printk_ratelimit() && Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Eldad Zack <eldad@fogrefinery.com> Cc: Daniel Mack <zonque@gmail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: hda - hdmi: call overridden init on resumePierre Ossman2014-07-061-1/+1
| | | | | | | | | | | | | | | | commit a283368382c50345dff61525f493ea307f21ec9b upstream. We need to call the proper init function in case it has been overridden, as it might restore things that the generic routing doesn't know anything about. E.g. AMD cards have special verbs that need resetting. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=77901 Fixes: 5a61358433b1 ('ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support') Signed-off-by: Pierre Ossman <pierre@ossman.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: Fix races at disconnection and PCM closingTakashi Iwai2014-07-063-6/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 92a586bdc06de6629dae1b357dac221253f55ff8 upstream. When a USB-audio device is disconnected while PCM is still running, we still see some race: the disconnect callback calls snd_usb_endpoint_free() that calls release_urbs() and then kfree() while a PCM stream would be closed at the same time and calls stop_endpoints() that leads to wait_clear_urbs(). That is, the EP object might be deallocated while a PCM stream is syncing with wait_clear_urbs() with the same EP. Basically calling multiple wait_clear_urbs() would work fine, also calling wait_clear_urbs() and release_urbs() would work, too, as wait_clear_urbs() just reads some fields in ep. The problem is the succeeding kfree() in snd_pcm_endpoint_free(). This patch moves out the EP deallocation into the later point, the destructor callback. At this stage, all PCMs must have been already closed, so it's safe to free the objects. Reported-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: control: Make sure that id->index does not overflowLars-Peter Clausen2014-06-261-0/+3
| | | | | | | | | | | | | | | | | commit 883a1d49f0d77d30012f114b2e19fc141beb3e8e upstream. The ALSA control code expects that the range of assigned indices to a control is continuous and does not overflow. Currently there are no checks to enforce this. If a control with a overflowing index range is created that control becomes effectively inaccessible and unremovable since snd_ctl_find_id() will not be able to find it. This patch adds a check that makes sure that controls with a overflowing index range can not be created. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: control: Handle numid overflowLars-Peter Clausen2014-06-261-0/+4
| | | | | | | | | | | | | | | | | | | commit ac902c112d90a89e59916f751c2745f4dbdbb4bd upstream. Each control gets automatically assigned its numids when the control is created. The allocation is done by incrementing the numid by the amount of allocated numids per allocation. This means that excessive creation and destruction of controls (e.g. via SNDRV_CTL_IOCTL_ELEM_ADD/REMOVE) can cause the id to eventually overflow. Currently when this happens for the control that caused the overflow kctl->id.numid + kctl->count will also over flow causing it to be smaller than kctl->id.numid. Most of the code assumes that this is something that can not happen, so we need to make sure that it won't happen Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: control: Don't access controls outside of protected regionsLars-Peter Clausen2014-06-261-5/+10
| | | | | | | | | | | | | | commit fd9f26e4eca5d08a27d12c0933fceef76ed9663d upstream. A control that is visible on the card->controls list can be freed at any time. This means we must not access any of its memory while not holding the controls_rw_lock. Otherwise we risk a use after free access. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: control: Fix replacing user controlsLars-Peter Clausen2014-06-261-16/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 82262a46627bebb0febcc26664746c25cef08563 upstream. There are two issues with the current implementation for replacing user controls. The first is that the code does not check if the control is actually a user control and neither does it check if the control is owned by the process that tries to remove it. That allows userspace applications to remove arbitrary controls, which can cause a user after free if a for example a driver does not expect a control to be removed from under its feed. The second issue is that on one hand when a control is replaced the user_ctl_count limit is not checked and on the other hand the user_ctl_count is increased (even though the number of user controls does not change). This allows userspace, once the user_ctl_count limit as been reached, to repeatedly replace a control until user_ctl_count overflows. Once that happens new controls can be added effectively bypassing the user_ctl_count limit. Both issues can be fixed by instead of open-coding the removal of the control that is to be replaced to use snd_ctl_remove_user_ctl(). This function does proper permission checks as well as decrements user_ctl_count after the control has been removed. Note that by using snd_ctl_remove_user_ctl() the check which returns -EBUSY at beginning of the function if the control already exists is removed. This is not a problem though since the check is quite useless, because the lock that is protecting the control list is released between the check and before adding the new control to the list, which means that it is possible that a different control with the same settings is added to the list after the check. Luckily there is another check that is done while holding the lock in snd_ctl_add(), so we'll rely on that to make sure that the same control is not added twice. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: control: Protect user controls against concurrent accessLars-Peter Clausen2014-06-262-6/+26
| | | | | | | | | | | | | | | | | | commit 07f4d9d74a04aa7c72c5dae0ef97565f28f17b92 upstream. The user-control put and get handlers as well as the tlv do not protect against concurrent access from multiple threads. Since the state of the control is not updated atomically it is possible that either two write operations or a write and a read operation race against each other. Both can lead to arbitrary memory disclosure. This patch introduces a new lock that protects user-controls from concurrent access. Since applications typically access controls sequentially than in parallel a single lock per card should be fine. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: hda - Add quirk for external mic on Lifebook U904David Henningsson2014-06-261-0/+9
| | | | | | | | | | | | | | | | commit 2041d56464a067461d7cc21734a0f024587ed2ff upstream. According to the bug reporter (Данило Шеган), the external mic starts to work and has proper jack detection if only pin 0x19 is marked properly as an external headset mic. AlsaInfo at https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1328587/+attachment/4128991/+files/AlsaInfo.txt BugLink: https://bugs.launchpad.net/bugs/1328587 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: hda/realtek - Add more entry for enable HP mute ledKailang Yang2014-06-261-0/+14
| | | | | | | | | | | commit 8a02b164d4bfac108bfe37e98108bff1e062bd3d upstream. More HP machine need mute led support. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: hda/realtek - Add support of ALC891 codecKailang Yang2014-06-261-0/+1
| | | | | | | | | | | commit b6c5fbad16aa5026f508093a8d651c25e1cb6179 upstream. New codec support for ALC891. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ASoC: tlv320aci3x: Fix custom snd_soc_dapm_put_volsw_aic3x() functionPeter Ujfalusi2014-06-261-1/+1
| | | | | | | | | | | | | | | | commit e6c111fac4464e3f4bf7b3802b517dafc80f8e0f upstream. For some unknown reason the parameters for snd_soc_test_bits() were in wrong order: It was: snd_soc_test_bits(codec, val, mask, reg); /* WRONG!!! */ while it should be: snd_soc_test_bits(codec, reg, mask, val); Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ASoC: max98090: Fix reset at resume timeLiam Girdwood2014-06-261-0/+3
| | | | | | | | | | | | | | | commit 25b4ab430f8e166c9b63f4db28e7e812d5a59396 upstream. Reset needs to wait 20ms before other codec IO is performed. This wait was not being performed. Fix this by making sure the reset register is not restored with the cache, but use the manual reset method in resume with the wait. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ASoC: dapm: Make sure to always update the DAPM graph in _put_volsw()Lars-Peter Clausen2014-06-261-13/+10
| | | | | | | | | | | | | | | commit c9e065c27fe9b81e5d6e7681d77a24f7b9616675 upstream. When using auto-muted controls it may happen that the register value will not change when changing a control from enabled to disabled (since the control might be physically disabled due to the auto-muting). We have to make sure to still update the DAPM graph and disconnect the mixer input. Fixes: commit 5729507 ("ASoC: dapm: Implement mixer input auto-disable") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: hda/realtek - Fix COEF widget NID for ALC260 replacer fixupTakashi Iwai2014-06-111-2/+2
| | | | | | | | | | | | | | commit 192a98e280e560510a62aca8cfa83b4ae7c095bb upstream. The conversion to a fixup table for Replacer model with ALC260 in commit 20f7d928 took the wrong widget NID for COEF setups. Namely, NID 0x1a should have been used instead of NID 0x20, which is the common node for all Realtek codecs but ALC260. Fixes: 20f7d928fa6e ('ALSA: hda/realtek - Replace ALC260 model=replacer with the auto-parser') Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptopRonan Marquet2014-06-111-4/+2
| | | | | | | | | | | | | | | | | | commit e30cf2d2bed3aed74a651c64de323ba26e4ff7d0 upstream. Correcion of wrong fixup entries add in commit ca8f0424 to replace static model quirk for PB V7900 laptop (will model). [note: the removal of ALC260_FIXUP_HP_PIN_0F chain is also needed as a part of the fix; otherwise the pin is set up wrongly as a headphone, and user-space (PulseAudio) may be wrongly trying to detect the jack state -- tiwai] Fixes: ca8f04247eaa ('ALSA: hda/realtek - Add the fixup codes for ALC260 model=will') Signed-off-by: Ronan Marquet <ronan.marquet@orange.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: hda/analog - Fix silent output on ASUS A8JNTakashi Iwai2014-06-111-0/+1
| | | | | | | | | | | | | | commit 598e306184d26fa1d546334f2eb370b4d94a4ad3 upstream. ASUS A8JN with AD1986A codec seems following the normal EAPD in the normal order (0 = off, 1 = on) unlike other machines with AD1986A. Apply the workaround used for Toshiba laptop that showed the same problem. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=75041 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ASoC: wm8962: Update register CLASS_D_CONTROL_1 to be non-volatileCharles Keepax2014-06-072-3/+16
| | | | | | | | | | | | | | | | | | | | | commit 44330ab516c15dda8a1e660eeaf0003f84e43e3f upstream. The register CLASS_D_CONTROL_1 is marked as volatile because it contains a bit, DAC_MUTE, which is also mirrored in the ADC_DAC_CONTROL_1 register. This causes problems for the "Speaker Switch" control, which will report an error if the CODEC is suspended because it relies on a volatile register. To resolve this issue mark CLASS_D_CONTROL_1 as non-volatile and manually keep the register cache in sync by updating both bits when changing the mute status. Reported-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ASoC: dapm: Skip CODEC<->CODEC links in connect_dai_link_widgets()Lars-Peter Clausen2014-06-071-2/+5
| | | | | | | | | | | | | | | | | | | | | commit ca5106ae3da0179dcee3ae21f3ea94f62e9fdb0c upstream. For CODEC to CODEC DAI links the paths are created in snd_soc_dapm_new_pcm(). Also for CODEC to CODEC links the widgets are connected cross-over via a DAI link widget, meaning that the capture widget of one CODEC will be connected to the playback widget of the other and vice versa. Whereas snd_soc_dapm_connect_dai_link_widgets() directly connects the playback widget of the CPU DAI to the playback widget of the CODEC DAI and the capture widget of the CPU DAI to the capture widget of the CODEC DAI. So not skipping CODEC<->CODEC links in snd_soc_dapm_connect_dai_link_widgets() will create incorrect connections between the two CODECs which will cause DAPM to detect active paths where there are none and unnecessarily power up widgets. Fixes: b893ea5 ("ASoC: sapm: Automatically connect DAI link widgets in DAPM graph.") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: hda - Fix onboard audio on Intel H97/Z97 chipsetsTakashi Iwai2014-06-071-0/+3
| | | | | | | | | | | | | | commit 77f07800cb456bed6e5c345e6e4e83e8eda62437 upstream. The recent Intel H97/Z97 chipsets need the similar setups like other Intel chipsets for snooping, etc. Especially without snooping, the audio playback stutters or gets corrupted. This fix patch just adds the corresponding PCI ID entry with the proper flags. Reported-and-tested-by: Arthur Borsboom <arthurborsboom@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: hda - hdmi: Set converter channel count even without sinkAnssi Hannula2014-06-071-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f06ab794af7055d0949b09885f79f8b493deec64 upstream. Since commit 1df5a06a ("ALSA: hda - hdmi: Fix programmed active channel count") channel count is no longer being set if monitor_present is 0. This is because setting the count was moved after the CA value is determined, which is only after the monitor_present check in hdmi_setup_audio_infoframe(). Unfortunately, in some cases, such as with a non-spec-compliant codec or with a problematic video driver, monitor_present is always 0. As a specific example, this seems to happen with gen1 ATV (SiI1390 codec), causing left-channel-only stereo playback (multi-channel playback has apparently never worked with this codec despite it reporting 8 channels, reason unknown). Simply setting converter channel count without setting the pin infoframe and channel mapping as well does not theoretically make much sense as this will just mean they are out-of-sync and multichannel playback will have a wrong channel mapping. However, adding back just setting the converter channel count even in no-monitor case is the safest change which at least fixes the stereo playback regression on SiI1390 codec. Do that. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Reported-by: Stephan Raue <stephan@openelec.tv> Tested-by: Stephan Raue <stephan@openelec.tv> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: usb-audio: work around corrupted TEAC UD-H01 feedback dataClemens Ladisch2014-06-072-1/+15
| | | | | | | | | | | | | | | | | | | commit 7040b6d1febfdbd9c1595efb751d492cd2503f96 upstream. The TEAC UD-H01 firmware sends wrong feedback frequency values, thus causing the PC to send the samples at a wrong rate, which results in clicks and crackles in the output. Add a workaround to detect and fix the corruption. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> [mick37@gmx.de: use sender->udh01_fb_quirk rather than ep->udh01_fb_quirk in snd_usb_handle_sync_urb()] Reported-and-tested-by: Mick <mick37@gmx.de> Reported-and-tested-by: Andrea Messa <andr.messa@tiscali.it> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ASoC: dapm: Fix widget double free with auto-disable DAPM kcontrolJarkko Nikula2014-05-131-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2697e4fb9209dfe1d1b24c92d254158f63d4bc8e upstream. Commit 9e1fda4ae158 ("ASoC: dapm: Implement mixer input auto-disable") is trying to free the widget it allocated by snd_soc_dapm_new_control() call in dapm_kcontrol_data_alloc() by adding kfree(data->widget) to dapm_kcontrol_free(). This is causing a widget double free with auto-disabled DAPM kcontrols in sound card unregistration because widgets are already freed before dapm_kcontrol_free() is called. Reason for that is all widgets are added into dapm->card->widgets list in snd_soc_dapm_new_control() and freed in dapm_free_widgets() during execution of snd_soc_dapm_free(). Now snd_soc_dapm_free() calls for different DAPM contexts happens before snd_card_free() call from where the call chain to dapm_kcontrol_free() begins: soc_cleanup_card_resources() soc_remove_dai_links() soc_remove_link_dais() snd_soc_dapm_free(&cpu_dai->dapm) soc_remove_link_components() soc_remove_platform() snd_soc_dapm_free(&platform->dapm) soc_remove_codec() snd_soc_dapm_free(&codec->dapm) snd_soc_dapm_free(&card->dapm) snd_card_free() snd_card_do_free() snd_device_free_all() snd_device_free() snd_ctl_dev_free() snd_ctl_remove() snd_ctl_free_one() dapm_kcontrol_free() This wasn't making harm with ordinary DAPM kcontrols since data->widget is NULL for them. Fixes: 9e1fda4ae158 (ASoC: dapm: Implement mixer input auto-disable) Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: hda/realtek - Add headset Mic support for Dell machineKailang Yang2014-05-061-0/+2
| | | | | | | | | commit 8dc9abb93dde94e7f2bc719032fe16f5713df05c upstream. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: hda/realtek - Add support of ALC288 codecKailang Yang2014-05-061-0/+2
| | | | | | | | | commit 7c66593286bcd153e4868383e675673a27071bd5 upstream. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: hda - Fix silent speaker output due to mute LED fixupTakashi Iwai2014-05-061-2/+3
| | | | | | | | | | | | | | | | | | commit 415d555e6b398b00fc1733f0113065a54df9106a upstream. The recent fixups for HP laptops to support the mute LED made the speaker output silent on some machines. It turned out that they use the NID 0x18 for the speaker while it's also used for controlling the LED via VREF bits although the current driver code blindly assumes that such a node is a mic pin (where 0x18 is usually so). This patch fixes the problem by only changing the VREF bits and keeping the other pin ctl bits. Reported-and-tested-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: ice1712: Fix boundary checks in PCM pointer opsTakashi Iwai2014-05-061-5/+10
| | | | | | | | | | | | | | | | | commit 4f8e940095536bc002a81666a4107a581c84e9b9 upstream. PCM pointer callbacks in ice1712 driver check the buffer size boundary wrongly between bytes and frames. This leads to PCM core warnings like: snd_pcm_update_hw_ptr0: 105 callbacks suppressed ALSA pcm_lib.c:352 BUG: pcmC3D0c:0, pos = 5461, buffer size = 5461, period size = 2730 This patch fixes these checks to be placed after the proper unit conversions. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: hda - Enable beep for ASUS 1015EW. Trevor King2014-05-061-0/+1
| | | | | | | | | | | | | | | | commit a4b7f21d7b42b33609df3f86992a8deff80abfaf upstream. The `lspci -nnvv` output contains (wrapped for line length): 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:115d] Signed-off-by: W. Trevor King <wking@tremily.us> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: hda - add headset mic detect quirks for three Dell laptopsHui Wang2014-05-061-0/+3
| | | | | | | | | | | | | | | | commit a870593bab179ca402ead455f45af6e4404a2a7f upstream. When we plug a 3-ring headset on the Dell machines (VID: 0x10ec0255, SID: 0x10280632; VID: 0x10ec0293, SID: 0x1028062c; VID: 0x10ec0293, SID: 0x1028062e), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: hda/realtek - Restore default value for ALC283Kailang Yang2014-05-061-0/+85
| | | | | | | | | | | | | | commit 6bd55b04fe05cb26094b0fe494c7a207e6c0c36e upstream. Restore the registers to prevent the abnormal digital power supply rising ratio/sequence to the codec and causing the incorrect default codec register restoration during initialization. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=71861 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ASoC: cs42l73: Fix mask bits for SOC_VALUE_ENUM_SINGLEBrian Austin2014-05-061-3/+3
| | | | | | | | | | | | commit 1555b652970e541fa1cb80c61ffc696bbfb92bb7 upstream. The mask bits values were wrong for the SOC_VALUE_ENUM_SINGLE for the mono mix controls. Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ASoC: cs42l52: Fix mask bits for SOC_VALUE_ENUM_SINGLEBrian Austin2014-05-061-4/+4
| | | | | | | | | | | | commit d31a33dd7792c7d6c11fda226a3b9e4fb7f86f95 upstream. The mask bits values were wrong for the SOC_VALUE_ENUM_SINGLE for the PCM/ADC Swap controls Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ASoC: cs42l51: Fix SOC_DOUBLE_R_SX_TLV shift values for ADC, PCM, and Analog ↵Brian Austin2014-05-061-5/+4
| | | | | | | | | | | | | | | | kcontrols commit 7272e051157ccd5871b5d939548d0ba5a94a2965 upstream. The shift values for the ADC,PCM, and Analog kcontrols were wrong causing wrong values for the SOC_DOUBLE_R_SX_TLV macros Fixed the TLV for aout_tlv to show -102dB correctly Fixes: 1d99f2436d (ASoC: core: Rework SOC_DOUBLE_R_SX_TLV add SOC_SINGLE_SX_TLV) Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ASoC: pcm: Drop incorrect double/extra freesMark Brown2014-05-061-3/+0
| | | | | | | | | | | | | | | | commit 017d9491ce203c620ad1377f46a3ce78d554b2de upstream. The changes in "ASoC: pcm: free path list before exiting from error conditions" actually introduced both double frees (in case where the path list was allocated but empty) and frees of unallocated memory (in cases where the error being handled was -ENOMEM. Drop the commit for now. Fixes: e4ad1accb (ASoC: pcm: free path list before exiting from error conditions) Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "ALSA: hda - Increment default stream numbers for AMD HDMI controllers"Takashi Iwai2014-04-141-2/+2
| | | | | | | | | | | | | | | | | | | | This reverts commit 7546abfb8e1f9933b549f05898377e9444ee4cb2. The commit [7546abfb: ALSA: hda - Increment default stream numbers for AMD HDMI controllers] introduced a regression where the AMD HDMI playback streams don't work properly. As the simplest fix, this patch reverts that commit. The upstream code has been changed largely and already contains another fix (by changing the stream assignment order), this revert should be applied only to 3.14 kernel where the regression was introduced. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77002 Reported-by: Christian Güdel <cg@dmesg.ch> Reported-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ALSA: compress: Pass through return value of open ops callbackCharles Keepax2014-03-191-1/+1
| | | | | | | | | | | | | | | | The snd_compr_open function would always return 0 even if the compressed ops open function failed, obviously this is incorrect. Looks like this was introduced by a small typo in: commit a0830dbd4e42b38aefdf3fb61ba5019a1a99ea85 ALSA: Add a reference counter to card instance This patch returns the value from the compressed op as it should. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: oxygen: Xonar DG(X): fix Stereo Upmixing regressionClemens Ladisch2014-03-181-6/+24
| | | | | | | | | | | | | | | | The code introduced in commit 1f91ecc14dee ("ALSA: oxygen: modify adjust_dg_dac_routing function") accidentally disregarded the old value of the playback routing register, so it broke the "Stereo Upmixing" mixer control. The unmuted parts of the channel routing are the same for all settings of the output destination, so it suffices to revert that part of the patch. Fixes: 1f91ecc14dee ('ALSA: oxygen: modify adjust_dg_dac_routing function') Tested-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge tag 'asoc-v3.14-rc6' of ↵Takashi Iwai2014-03-114-2/+10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.14 A few things here: - Avoid memory leaks in error cases with DPCM, this code has never been that well tested in mainline due to the lack of mainline drivers but we now have one queued for the merge window! - Fix the N810 audio driver to load when booted with DT since the platform was converted to DT during the merge window. - Fixes for initialisation of some MFD drivers that are probably unused in mainline
| *---. Merge remote-tracking branches 'asoc/fix/88pm860', 'asoc/fix/omap' and ↵Mark Brown2014-03-103-2/+7
| |\ \ \ | | | | | | | | | | | | | | | 'asoc/fix/si476x' into asoc-linus
| | | | * ASoC: si476x: Fix IO setupLars-Peter Clausen2014-03-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The si476x is a MFD device and the CODEC driver is using the regmap struct of the parent device, hence automatic IO setup will not work and we need to manually call snd_soc_codec_set_cache_io(). The issue was introduced commit d6173df35f ("ASoC: si476x: Remove custom register I/O implementation") Fixes: d6173df35f ("ASoC: si476x: Remove custom register I/O implementation") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
| | | * | ASoC: n810: fix init with DT bootAaro Koskinen2014-03-041-1/+3
| | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since 3.14-rc1 only DT boot has been supported on N810, so this file fails to init. Make a minimal fix to retain functionality. This file should be properly converted to DT in longer term. There seems to be still other unresolved issues with N810 audio support, but this patch is needed at minimum as otherwise the machine driver probing would completely fail. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
| | * | ASoC: 88pm860: Fix IO setupLars-Peter Clausen2014-03-101-0/+3
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 88pm860 is a MFD device and the CODEC driver is using the regmap struct of the parent device, hence automatic IO setup will not work and we need to manually call snd_soc_codec_set_cache_io(). The issue was introduced in commit f9ded3b2e7 ("ASoC: 88pm860x: Use regmap for I/O"). Fixes: f9ded3b2e7 ("ASoC: 88pm860x: Use regmap for I/O"). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
| * | Merge remote-tracking branch 'asoc/fix/pcm' into asoc-linusMark Brown2014-03-101-0/+3
| |\ \
| | * | ASoC: pcm: free path list before exiting from error conditionsPatrick Lai2014-03-051-0/+3
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dpcm_path_get() allocates dynamic memory to hold path list. Corresponding dpcm_path_put() must be called to free the memory. dpcm_path_put() is not called under several error conditions. This leads to memory leak. Signed-off-by: Patrick Lai <plai@codeaurora.org> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
* | | ALSA: hda - Fix loud click noise with IdeaPad 410YTakashi Iwai2014-03-071-0/+19
|/ / | | | | | | | | | | | | | | | | | | | | | | | | Lenovo IdeaPad 410Y with ALC282 codec makes loud click noises at boot and shutdown. Also, it wrongly misdetects the acpi_thinkpad hook. This patch adds a device-specific fixup for disabling the shutup callback that is the cause of the click noise and also avoiding the thinpad_helper calls. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=71511 Reported-and-tested-by: Guilherme Amadio <guilherme.amadio@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: usb-audio: Add quirk for Logitech Webcam C500Takashi Iwai2014-03-051-0/+1
| | | | | | | | | | | | | | | | Logitech C500 (046d:0807) needs the same workaround like other Logitech Webcams. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | ALSA: hda - Use analog beep for Thinkpads with AD1984 codecsTakashi Iwai2014-03-051-0/+3
| | | | | | | | | | | | | | | | For making the driver behavior compatible with the earlier kernels, use the analog beep in the loopback path instead of the digital beep. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
View Lorry Controller Status