From 4cb53a2308a96d97854b166780dace58737446ed Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 7 Apr 2016 13:25:40 +0300 Subject: ARM: dts: omap3-beagle: Provide NAND ready pin On these boards NAND ready pin status is avilable over GPMC_WAIT0 pin. For NAND we don't use GPMC wait pin monitoring but get the NAND Ready/Busy# status using GPIOlib. GPMC driver provides the WAIT0 pin status over GPIOlib. Read speed increases from 13212 KiB/ to 15753 KiB/s and write speed was unchanged at 4404 KiB/s. Measured using mtd_speedtest.ko on omap3-beagle-c4. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-beagle.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts/omap3-beagle.dts') diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 4602866792be..a4deff0e2d52 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -390,6 +390,7 @@ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ ti,nand-ecc-opt = "ham1"; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ nand-bus-width = <16>; #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.1