summaryrefslogtreecommitdiff
path: root/drivers/media/dvb/frontends
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] dvb: usb: digitv: support for nxt6000 demodSvante Olofsson2005-09-091-0/+9
| | | | | | | | | | | Add support for the NXT6000-based digitv-box. Add .get_tune_settings callback for the NXT6000 to have a min_tune_delay of 500ms. Signed-off-by: Svante Olofsson <svante@agentum.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: frontend: or51132: remove bogus optimization attemptMac Michaels2005-09-091-16/+13
| | | | | | | | | | | | | | | | | | This fix has also been applied to lgdt330x. There is an optimization that keeps track of the frequency tuned by the digital decoder. The digital driver does not set the frequency if it has not changed since it was tuned. The analog tuner driver knows nothing about the frequency saved by the digital driver. When the frequency is set using the video4linux code with tvtime, the hardware get changed but the digital driver's state does not get updated. Switch back to the same digital channel and the driver finds no change in frequency so the tuner is not reset to the digital frequency. The work around is to remove the check and always set the tuner to the specified frequency. Signed-off-by: Mac Michaels <wmichaels1@earthlink.net> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: frontend: stv0297: QAM128 tuning improvementPatrick Boettcher2005-09-091-1/+7
| | | | | | | | | | | | | | | | | while investigating the QAM_128-issue with the stv0297-driver for the Cablestar (which is not the same as the one in dvb-kernel CVS, yet), I fixed it, not by increasing the timeout, but by disabling the corner-detection for QAM_128 and higher. This patch has been tested on dvb-kernel cvs, and has been reported to work by multiple users. Some cards still need timeout increase on top of this patch. This will be addressed later. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: frontend: cx24110: clean up timeout handling.Johannes Stezenbach2005-09-091-5/+9
| | | | | | | | Clean up timeout handling. Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: frontend: cx24110: another DiSEqC fixAdam Szalkowski2005-09-091-5/+8
| | | | | | | | | Fix DiSEqC problems. Signed-off-by: Adam Szalkowski <adam@szalkowski.de> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: frontend: cx24110: DiSEqC fixJohannes Stezenbach2005-09-091-2/+3
| | | | | | | | | Fix DiSEqC switching (one bug fix suggested by Peter Hettkamp, and one experimentally determined msleep(30) suggested by Adam Szalkowski). Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: frontend: ves1820: improve tuningJohannes Stezenbach2005-09-091-8/+7
| | | | | | | | | Reset acgconf register after tuning to improve locking, as suggested by Marco Schluessler. Minor cleanups in ves1820_init(). Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: frontend: tda1004x: fix SNR readingAndrew de Quincey2005-09-091-2/+1
| | | | | | | | | Fix SNR reading Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: frontend: stv0299: support reading both BER and UCBLOCKSAndrew de Quincey2005-09-091-8/+5
| | | | | | | | | Allow the stv0299 to read the BER and UCBLOCKS. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: frontend: s5h1420: fixesAndrew de Quincey2005-09-092-69/+96
| | | | | | | | | Misc. fixes. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: frontend: stv0299: pass i2c bus to pll callbackAndreas Oberritter2005-09-092-5/+5
| | | | | | | | | | | | Pass a pointer to the i2c bus to the pll callbacks (stv0299 only). It was not possible to tell which i2c bus should be used if an adapter has multiple frontends on multiple i2c buses. Signed-off-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: frontend: mt352: fix signal strength readingBarry Scott2005-09-091-2/+4
| | | | | | | | | | | | Fix two problems with the signal strength value in the mt352.c frontend: 1. the 4 most significant bits are zeroed - shift and mask wrong way round 2. need to align the 12 bits from the registers at the top of the 16 bit returned value - otherwise the range is not 0 to 0xffff its 0xf000 to 0xffff Signed-off-by: Barry Scott <barry.scott@onelan.co.uk> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: remove version.h dependenciesOlaf Hering2005-09-092-2/+0
| | | | | | | | | | Remove all #include <linux/version.h> and all references to LINUX_VERSION_CODE and KERNEL_VERSION. Based on patch by Olaf Hering. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: email address updateJohannes Stezenbach2005-09-092-2/+2
| | | | | | | | Update email address of Peter Hettkamp. Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] DVB: lgdt330x check callback fixMichael Krufky2005-09-071-25/+25
| | | | | | | | | | | | | Most of the patch is whitespace cleanup, but more importantly, this patch checks to see whether a callback is set before calling it. On cx88 boards (currently the only boards using lgdt330x in 2.6.13) every callback is set. However, newer drivers currently in development leave a callback undefined, and lgdt330x must not call it if it isn't defined. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] missing include in tda80xxAl Viro2005-08-291-0/+1
| | | | | Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] DVB: lgdt330x frontend: some bug fixes & add lgdt3303 supportMichael Krufky2005-08-091-35/+0
| | | | | | | | | | This patch removes the tda9887 stuff from lgdt330x.c. It's experimental code which wasn't supposed to leak out and we don't want it in 2.6.13. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Acked-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: lgdt330x frontend: trivial text cleanupsMichael Krufky2005-08-092-2/+2
| | | | | | | | Two trivial text changes in Kconfig and lgdt330x.c Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: lgdt330x frontend: some bug fixes & add lgdt3303 supportMichael Krufky2005-08-085-167/+423
| | | | | | | | | | | | | - Structural changes within lgdt330x driver, framework now supports both chips... tested OK on lgdt3302 and lgdt3303. - Add LG/TUA6034 dvb_pll_desc for ATSC with LG TDVS-H062F & DViCO FusionHDTV5. - Fixed LGDT330X signal strength: For now, always set it to 0. - Corrected LGDT330X boundary condition error in read_snr: dB calculation. Signed-off-by: Mac Michaels <wmichaels1@earthlink.net> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: rename lgdt3302 frontend module to lgdt330xMichael Krufky2005-07-275-77/+74
| | | | | | | | | | | | | | Rename lgdt3302 to lgdt330x, to make way for the addition of lgdt3303 support in future revisions. I am changing the name of this module now so that hopefully the name will be changed before the release of 2.6.13 ... It wouldn't make sense to release 2.6.13 with the name lgdt3302 in it, which will only be renamed to lgdt330x in later versions. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] lgdt3302: warning fixMichael Krufky2005-07-271-0/+2
| | | | | | | | | | warning: `i2c_readbytes' defined but not used This code will either be re-enabled or deleted in a future patch. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb/4vl: RF input selection firMichael Krufky2005-07-272-0/+13
| | | | | | | | | | | | Select the RF input connector based upon the type of demodulation selected. ANT RF connector is selected for 8-VSB and CABLE RF connector is selected for QAM64/QAM256. This only affects the cards that use the Microtune 4042 tuner. Signed-off-by: Mac Michaels <wmichaels1@earthlink.net> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb/v4l: lgdt3302: isolate tunerMichael Krufky2005-07-272-41/+34
| | | | | | | | | | Remove the dvb_pll_desc from the frontend and replace with a pll_set-callback to isolate the tuner programming from the frontend. Signed-off-by: Mac Michaels <wmichaels1@earthlink.net> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] DVICO Fusion DVB-T1 Tuner (LG-Z201) fixGregory B Frost2005-07-271-5/+6
| | | | | | | | | | | | | | | | | | It is a small modification to the table that defines the way that the LG-Z201 tuner is controlled for the DVICO Fusion DVB-T1 tuner card. I believe that a mistake was made when the dvb tuner code was reorganised (to use a generic table for the tuner information instead of inline code) and as a result, the DVICO card doesn't tune properly. The modification I have made to the table makes it behave like it did with the old inline tuner code that worked. The patch is on top of the 2.6.12 kernel. Signed-off-by: Gregory B Frost <frosts1@hotkey.net.au> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: LGDT3302 QAM lock bug fixMichael Krufky2005-07-141-13/+3
| | | | | | | | | | Fix QAM lock bug. Previously, it was necessary to first scan in VSB before attempting to get a QAM lock. Signed-off-by: Mac Michaels <wmichaels1@earthlink.net> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: LGDT3302 QAM256 initialization fixMichael Krufky2005-07-121-33/+31
| | | | | | | | | | | | | | | | - Initialize all non mutually exclusive variables without regard to the mode selected. - Do a software reset each time the parameters are set, regardless of whether anything changes. This may allow an application to recover from a hung condition. - Improved error reporting. - Removed $Id:$ Signed-off-by: Mac Michaels <wmichaels1@earthlink.net> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] v4l: LGDT3302 read status fixMichael Krufky2005-07-071-25/+18
| | | | | | | | | | | - Fix bug in lgdt3302_read_status to return correct FE_HAS_SIGNAL and FS_HAS_CARRIER status. - Removed #if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,10). Signed-off-by: Mac Michaels <wmichaels1@earthlink.net> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] v4l: add DVB support for DViCO FusionHDTV3 Gold-TMichael Krufky2005-07-072-0/+14
| | | | | | | | | | | | | - Correct sync byte for MPEG-2 transport stream packets. - Add lgdt3302 as dependency of cx88-dvb in Kconfig. - Add dvb support in v4l for DViCO FusionHDTV3 Gold-T using lgdt3302 frontend. This adds support for a different board from the previous (Gold-Q) patch. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: frontend: add driver for LGDT3302Mac Michaels2005-07-077-0/+761
| | | | | | | | | | Add support for LGDT3302 (ATSC VSB/QAM) used in DViCO FusionHDTV3 Gold. Signed-off-by: Mac Michaels <wmichaels1@earthlink.net> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: frontend: add ALPS TDED4 PLLPatrick Boettcher2005-07-072-1/+26
| | | | | | | | | | Add dvb_pll_desc for ALPS TDED4 used in Nebula USB boxes. Changed the name-field of the FMD1216. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: frontend: add FMD1216ME PLLPatrick Boettcher2005-07-072-5/+33
| | | | | | | | | | o change dvb-pll desc to take the frequency as parameter for setbw-callback into consideration o added dvb-pll desc for Philips FMD1216ME (needed for cxusb) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: ttpci: add support for Technotrend/Hauppauge DVB-S SEAndrew de Quincey2005-07-074-0/+848
| | | | | | | | | Add support for s5h1420 frontend (new Technotrend/Hauppauge DVB-S SE). Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: DVB updateJohannes Stezenbach2005-07-071-4/+4
| | | | | | | | | Increase some timeouts by a factor of 10 as suggested by Mikko Hamalainen and Timo Ketolainen, to improve tuning for QAM128 / weak signal. Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: frontend: l64781: improve tuningJohannes Stezenbach2005-07-071-4/+5
| | | | | | | | | Disable zig-zag and set min_delay_ms = 4000 as suggested by Allan Guild to improve tuning with weak signal. Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: frontend: cx22702: support for cxusbPatrick Boettcher2005-07-072-9/+25
| | | | | | | | | | Add .get_tune_settings callback (min_delay_ms = 1sec) and output_mode-field (parallel/serial) to support cxusb; minor cleanups. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: frontend: tda1004x: support tda827x tunersHartmut Hackmann2005-07-072-4/+44
| | | | | | | | | | | o added preliminary support for tda827x tuners o set parameters for drift compensation to 0 makes no sense for DVB-T but can prevent lock Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: add missing release_firmware() callsAnssi Hannula2005-07-071-0/+2
| | | | | | | | | Add missing release_firmware() calls to fix memory leaks. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: frontend: bcm3510: fix firmware version checkHartmut Hackmann2005-07-071-1/+1
| | | | | | | | | Fix limit for firmware version check was too low for tda10045. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: frontend: tda1004x updateHartmut Hackmann2005-07-072-98/+122
| | | | | | | | | | | o added config options for IF frequency and AGC o support DSP boot from on board eeprom o added pll sleep call Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [DVB]: Do not include <linux/irq.h> from drivers.Eddie C. Dost2005-07-061-1/+0
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] dvb: flexcop: add BCM3510 ATSC frontend support for Air2PC cardJohannes Stezenbach2005-06-245-0/+1362
| | | | | | | | | | | Added support for the Broadcom BCM3510 ATSC (8VSB/16VSB & ITU J83 AnnexB FEC QAM64/256) demodulator used in the first generation of Air2PC ATSC PCI-cards/USB-boxes made by B2C2. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: Add generalized dvb-usb driverJohannes Stezenbach2005-06-247-51/+110
| | | | | | | | | | Add generalized dvb-usb driver which supports a wide variety of devices. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: frontends: misc. minor cleanupsJohannes Stezenbach2005-05-174-18/+14
| | | | | | | | misc. minor cleanups, select FW_LOADER and add a help text to DVB_OR51132 Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: make needlessly global code static or drop itJohannes Stezenbach2005-05-172-13/+0
| | | | | | | | | | | | | - make needlessly global code static - #if 0 the following unused global functions: - ttpci/av7110_hw.c: av7110_reset_arm - ttpci/av7110_hw.c: av7110_send_ci_cmd - frontends/mt352.[ch]: drop mt352_read Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: dvb-pll.h: prevent multiple inclusionJohannes Stezenbach2005-05-171-6/+4
| | | | | | | | | added missing #ifndef and #define to inhibit multiple inclusions (Patrick Boettcher) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: tda10046: support for different firmware versionsJohannes Stezenbach2005-05-171-2/+34
| | | | | | | | | added support for different tda10046 firmware versions. tested with v20, v21 and v25. (Andreas Oberritter) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: tda1004x: allow N_I2C to be overridden by the card driverJohannes Stezenbach2005-05-172-2/+5
| | | | | | | | allow N_I2C to be overridden by the card driver (Andreas Oberritter) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: tda1004x: dont use bitfieldsJohannes Stezenbach2005-05-171-2/+2
| | | | | | | | use simple u8 instead of bitfields (Andreas Oberritter) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: mt352: embed struct mt352_config in mt352_stateJohannes Stezenbach2005-05-171-14/+14
| | | | | | | | | copying the mt352_config-struct to mt352_state instead of storing just the pointer to it (Patrick Boettcher) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dvb: ves1820: remove unnecessary msleepJohannes Stezenbach2005-05-171-1/+0
| | | | | | | | remove unnecessary msleep(10) in writereg (Tony Glader) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
View Lorry Controller Status