From 9166c9f8aa12f9a939f97ef8dd0e489b8888273a Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 7 Sep 2020 20:33:10 +0200 Subject: ARM: dts: s3c24xx: override nodes by label Using full paths to extend or override a device tree node is error prone. If there was a typo error, a new node will be created instead of extending the existing node. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20200907183313.29234-9-krzk@kernel.org --- arch/arm/boot/dts/s3c2416.dtsi | 104 ++++++++++++++++++++--------------------- 1 file changed, 52 insertions(+), 52 deletions(-) (limited to 'arch/arm/boot/dts/s3c2416.dtsi') diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index 6adf64ea3ff2..d1dec9f52f69 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -23,49 +23,12 @@ }; }; - interrupt-controller@4a000000 { - compatible = "samsung,s3c2416-irq"; - }; - clocks: clock-controller@4c000000 { compatible = "samsung,s3c2416-clock"; reg = <0x4c000000 0x40>; #clock-cells = <1>; }; - pinctrl@56000000 { - compatible = "samsung,s3c2416-pinctrl"; - }; - - timer@51000000 { - clocks = <&clocks PCLK_PWM>; - clock-names = "timers"; - }; - - uart_0: serial@50000000 { - compatible = "samsung,s3c2440-uart"; - clock-names = "uart", "clk_uart_baud2", - "clk_uart_baud3"; - clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, - <&clocks SCLK_UART>; - }; - - uart_1: serial@50004000 { - compatible = "samsung,s3c2440-uart"; - clock-names = "uart", "clk_uart_baud2", - "clk_uart_baud3"; - clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>, - <&clocks SCLK_UART>; - }; - - uart_2: serial@50008000 { - compatible = "samsung,s3c2440-uart"; - clock-names = "uart", "clk_uart_baud2", - "clk_uart_baud3"; - clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>, - <&clocks SCLK_UART>; - }; - uart_3: serial@5000c000 { compatible = "samsung,s3c2440-uart"; reg = <0x5000C000 0x4000>; @@ -98,22 +61,59 @@ <&clocks MUX_HSMMC1>; status = "disabled"; }; +}; - watchdog: watchdog@53000000 { - interrupts = <1 9 27 3>; - clocks = <&clocks PCLK_WDT>; - clock-names = "watchdog"; - }; +&i2c { + compatible = "samsung,s3c2440-i2c"; + clocks = <&clocks PCLK_I2C0>; + clock-names = "i2c"; +}; - rtc: rtc@57000000 { - compatible = "samsung,s3c2416-rtc"; - clocks = <&clocks PCLK_RTC>; - clock-names = "rtc"; - }; +&intc { + compatible = "samsung,s3c2416-irq"; +}; - i2c@54000000 { - compatible = "samsung,s3c2440-i2c"; - clocks = <&clocks PCLK_I2C0>; - clock-names = "i2c"; - }; +&pinctrl_0 { + compatible = "samsung,s3c2416-pinctrl"; +}; + +&rtc { + compatible = "samsung,s3c2416-rtc"; + clocks = <&clocks PCLK_RTC>; + clock-names = "rtc"; +}; + +&timer { + clocks = <&clocks PCLK_PWM>; + clock-names = "timers"; +}; + +&uart_0 { + compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; +}; + +&uart_1 { + compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>, + <&clocks SCLK_UART>; +}; + +&uart_2 { + compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>, + <&clocks SCLK_UART>; +}; + +&watchdog { + interrupts = <1 9 27 3>; + clocks = <&clocks PCLK_WDT>; + clock-names = "watchdog"; }; -- cgit v1.2.1