/* * ARC700 VIPT Cache Management * * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * vineetg: May 2011: for Non-aliasing VIPT D-cache following can be NOPs * -flush_cache_dup_mm (fork) * -likewise for flush_cache_mm (exit/execve) * -likewise for flush_cache_range,flush_cache_page (munmap, exit, COW-break) * * vineetg: Apr 2011 * -Now that MMU can support larger pg sz (16K), the determiniation of * aliasing shd not be based on assumption of 8k pg * * vineetg: Mar 2011 * -optimised version of flush_icache_range( ) for making I/D coherent * when vaddr is available (agnostic of num of aliases) * * vineetg: Mar 2011 * -Added documentation about I-cache aliasing on ARC700 and the way it * was handled up until MMU V2. * -Spotted a three year old bug when killing the 4 aliases, which needs * bottom 2 bits, so we need to do paddr | {0x00, 0x01, 0x02, 0x03} * instead of paddr | {0x00, 0x01, 0x10, 0x11} * (Rajesh you owe me one now) * * vineetg: Dec 2010 * -Off-by-one error when computing num_of_lines to flush * This broke signal handling with bionic which uses synthetic sigret stub * * vineetg: Mar 2010 * -GCC can't generate ZOL for core cache flush loops. * Conv them into iterations based as opposed to while (start < end) types * * Vineetg: July 2009 * -In I-cache flush routine we used to chk for aliasing for every line INV. * Instead now we setup routines per cache geometry and invoke them * via function pointers. * * Vineetg: Jan 2009 * -Cache Line flush routines used to flush an extra line beyond end addr * because check was while (end >= start) instead of (end > start) * =Some call sites had to work around by doing -1, -4 etc to end param * =Some callers didnt care. This was spec bad in case of INV routines * which would discard valid data (cause of the horrible ext2 bug * in ARC IDE driver) * * vineetg: June 11th 2008: Fixed flush_icache_range( ) * -Since ARC700 caches are not coherent (I$ doesnt snoop D$) both need * to be flushed, which it was not doing. * -load_module( ) passes vmalloc addr (Kernel Virtual Addr) to the API, * however ARC cache maintenance OPs require PHY addr. Thus need to do * vmalloc_to_phy. * -Also added optimisation there, that for range > PAGE SIZE we flush the * entire cache in one shot rather than line by line. For e.g. a module * with Code sz 600k, old code flushed 600k worth of cache (line-by-line), * while cache is only 16 or 32k. */ #include #include #include #include #include #include #include #include #include #include #include char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len) { int n = 0; unsigned int c = smp_processor_id(); #define PR_CACHE(p, enb, str) \ { \ if (!(p)->ver) \ n += scnprintf(buf + n, len - n, str"\t\t: N/A\n"); \ else \ n += scnprintf(buf + n, len - n, \ str"\t\t: (%uK) VIPT, %dway set-asc, %ub Line %s\n", \ TO_KB((p)->sz), (p)->assoc, (p)->line_len, \ enb ? "" : "DISABLED (kernel-build)"); \ } PR_CACHE(&cpuinfo_arc700[c].icache, __CONFIG_ARC_HAS_ICACHE, "I-Cache"); PR_CACHE(&cpuinfo_arc700[c].dcache, __CONFIG_ARC_HAS_DCACHE, "D-Cache"); return buf; } /* * Read the Cache Build Confuration Registers, Decode them and save into * the cpuinfo structure for later use. * No Validation done here, simply read/convert the BCRs */ void __cpuinit read_decode_cache_bcr(void) { struct bcr_cache ibcr, dbcr; struct cpuinfo_arc_cache *p_ic, *p_dc; unsigned int cpu = smp_processor_id(); p_ic = &cpuinfo_arc700[cpu].icache; READ_BCR(ARC_REG_IC_BCR, ibcr); if (ibcr.config == 0x3) p_ic->assoc = 2; p_ic->line_len = 8 << ibcr.line_len; p_ic->sz = 0x200 << ibcr.sz; p_ic->ver = ibcr.ver; p_dc = &cpuinfo_arc700[cpu].dcache; READ_BCR(ARC_REG_DC_BCR, dbcr); if (dbcr.config == 0x2) p_dc->assoc = 4; p_dc->line_len = 16 << dbcr.line_len; p_dc->sz = 0x200 << dbcr.sz; p_dc->ver = dbcr.ver; } /* * 1. Validate the Cache Geomtery (compile time config matches hardware) * 2. If I-cache suffers from aliasing, setup work arounds (difft flush rtn) * (aliasing D-cache configurations are not supported YET) * 3. Enable the Caches, setup default flush mode for D-Cache * 3. Calculate the SHMLBA used by user space */ void __cpuinit arc_cache_init(void) { unsigned int temp; unsigned int cpu = smp_processor_id(); struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache; struct cpuinfo_arc_cache *dc = &cpuinfo_arc700[cpu].dcache; int way_pg_ratio = way_pg_ratio; int dcache_does_alias; char str[256]; printk(arc_cache_mumbojumbo(0, str, sizeof(str))); if (!ic->ver) goto chk_dc; #ifdef CONFIG_ARC_HAS_ICACHE /* 1. Confirm some of I-cache params which Linux assumes */ if ((ic->assoc != ARC_ICACHE_WAYS) || (ic->line_len != ARC_ICACHE_LINE_LEN)) { panic("Cache H/W doesn't match kernel Config"); } #if (CONFIG_ARC_MMU_VER > 2) if (ic->ver != 3) { if (running_on_hw) panic("Cache ver doesn't match MMU ver\n"); /* For ISS - suggest the toggles to use */ pr_err("Use -prop=icache_version=3,-prop=dcache_version=3\n"); } #endif #endif /* Enable/disable I-Cache */ temp = read_aux_reg(ARC_REG_IC_CTRL); #ifdef CONFIG_ARC_HAS_ICACHE temp &= ~IC_CTRL_CACHE_DISABLE; #else temp |= IC_CTRL_CACHE_DISABLE; #endif write_aux_reg(ARC_REG_IC_CTRL, temp); chk_dc: if (!dc->ver) return; #ifdef CONFIG_ARC_HAS_DCACHE if ((dc->assoc != ARC_DCACHE_WAYS) || (dc->line_len != ARC_DCACHE_LINE_LEN)) { panic("Cache H/W doesn't match kernel Config"); } dcache_does_alias = (dc->sz / ARC_DCACHE_WAYS) > PAGE_SIZE; /* check for D-Cache aliasing */ if (dcache_does_alias && !cache_is_vipt_aliasing()) panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n"); else if (!dcache_does_alias && cache_is_vipt_aliasing()) panic("Don't need CONFIG_ARC_CACHE_VIPT_ALIASING\n"); #endif /* Set the default Invalidate Mode to "simpy discard dirty lines" * as this is more frequent then flush before invalidate * Ofcourse we toggle this default behviour when desired */ temp = read_aux_reg(ARC_REG_DC_CTRL); temp &= ~DC_CTRL_INV_MODE_FLUSH; #ifdef CONFIG_ARC_HAS_DCACHE /* Enable D-Cache: Clear Bit 0 */ write_aux_reg(ARC_REG_DC_CTRL, temp & ~IC_CTRL_CACHE_DISABLE); #else /* Flush D cache */ write_aux_reg(ARC_REG_DC_FLSH, 0x1); /* Disable D cache */ write_aux_reg(ARC_REG_DC_CTRL, temp | IC_CTRL_CACHE_DISABLE); #endif return; } #define OP_INV 0x1 #define OP_FLUSH 0x2 #define OP_FLUSH_N_INV 0x3 #ifdef CONFIG_ARC_HAS_DCACHE /*************************************************************** * Machine specific helpers for Entire D-Cache or Per Line ops */ static inline void wait_for_flush(void) { while (read_aux_reg(ARC_REG_DC_CTRL) & DC_CTRL_FLUSH_STATUS) ; } /* * Operation on Entire D-Cache * @cacheop = {OP_INV, OP_FLUSH, OP_FLUSH_N_INV} * Note that constant propagation ensures all the checks are gone * in generated code */ static inline void __dc_entire_op(const int cacheop) { unsigned long flags, tmp = tmp; int aux; local_irq_save(flags); if (cacheop == OP_FLUSH_N_INV) { /* Dcache provides 2 cmd: FLUSH or INV * INV inturn has sub-modes: DISCARD or FLUSH-BEFORE * flush-n-inv is achieved by INV cmd but with IM=1 * Default INV sub-mode is DISCARD, which needs to be toggled */ tmp = read_aux_reg(ARC_REG_DC_CTRL); write_aux_reg(ARC_REG_DC_CTRL, tmp | DC_CTRL_INV_MODE_FLUSH); } if (cacheop & OP_INV) /* Inv or flush-n-inv use same cmd reg */ aux = ARC_REG_DC_IVDC; else aux = ARC_REG_DC_FLSH; write_aux_reg(aux, 0x1); if (cacheop & OP_FLUSH) /* flush / flush-n-inv both wait */ wait_for_flush(); /* Switch back the DISCARD ONLY Invalidate mode */ if (cacheop == OP_FLUSH_N_INV) write_aux_reg(ARC_REG_DC_CTRL, tmp & ~DC_CTRL_INV_MODE_FLUSH); local_irq_restore(flags); } /* * Per Line Operation on D-Cache * Doesn't deal with type-of-op/IRQ-disabling/waiting-for-flush-to-complete * It's sole purpose is to help gcc generate ZOL * (aliasing VIPT dcache flushing needs both vaddr and paddr) */ static inline void __dc_line_loop(unsigned long paddr, unsigned long vaddr, unsigned long sz, const int aux_reg) { int num_lines; /* Ensure we properly floor/ceil the non-line aligned/sized requests * and have @paddr - aligned to cache line and integral @num_lines. * This however can be avoided for page sized since: * -@paddr will be cache-line aligned already (being page aligned) * -@sz will be integral multiple of line size (being page sized). */ if (!(__builtin_constant_p(sz) && sz == PAGE_SIZE)) { sz += paddr & ~DCACHE_LINE_MASK; paddr &= DCACHE_LINE_MASK; vaddr &= DCACHE_LINE_MASK; } num_lines = DIV_ROUND_UP(sz, ARC_DCACHE_LINE_LEN); #if (CONFIG_ARC_MMU_VER <= 2) paddr |= (vaddr >> PAGE_SHIFT) & 0x1F; #endif while (num_lines-- > 0) { #if (CONFIG_ARC_MMU_VER > 2) /* * Just as for I$, in MMU v3, D$ ops also require * "tag" bits in DC_PTAG, "index" bits in FLDL,IVDL ops */ write_aux_reg(ARC_REG_DC_PTAG, paddr); write_aux_reg(aux_reg, vaddr); vaddr += ARC_DCACHE_LINE_LEN; #else /* paddr contains stuffed vaddrs bits */ write_aux_reg(aux_reg, paddr); #endif paddr += ARC_DCACHE_LINE_LEN; } } /* For kernel mappings cache operation: index is same as paddr */ #define __dc_line_op_k(p, sz, op) __dc_line_op(p, p, sz, op) /* * D-Cache : Per Line INV (discard or wback+discard) or FLUSH (wback) */ static inline void __dc_line_op(unsigned long paddr, unsigned long vaddr, unsigned long sz, const int cacheop) { unsigned long flags, tmp = tmp; int aux; local_irq_save(flags); if (cacheop == OP_FLUSH_N_INV) { /* * Dcache provides 2 cmd: FLUSH or INV * INV inturn has sub-modes: DISCARD or FLUSH-BEFORE * flush-n-inv is achieved by INV cmd but with IM=1 * Default INV sub-mode is DISCARD, which needs to be toggled */ tmp = read_aux_reg(ARC_REG_DC_CTRL); write_aux_reg(ARC_REG_DC_CTRL, tmp | DC_CTRL_INV_MODE_FLUSH); } if (cacheop & OP_INV) /* Inv / flush-n-inv use same cmd reg */ aux = ARC_REG_DC_IVDL; else aux = ARC_REG_DC_FLDL; __dc_line_loop(paddr, vaddr, sz, aux); if (cacheop & OP_FLUSH) /* flush / flush-n-inv both wait */ wait_for_flush(); /* Switch back the DISCARD ONLY Invalidate mode */ if (cacheop == OP_FLUSH_N_INV) write_aux_reg(ARC_REG_DC_CTRL, tmp & ~DC_CTRL_INV_MODE_FLUSH); local_irq_restore(flags); } #else #define __dc_entire_op(cacheop) #define __dc_line_op(paddr, vaddr, sz, cacheop) #define __dc_line_op_k(paddr, sz, cacheop) #endif /* CONFIG_ARC_HAS_DCACHE */ #ifdef CONFIG_ARC_HAS_ICACHE /* * I-Cache Aliasing in ARC700 VIPT caches * * ARC VIPT I-cache uses vaddr to index into cache and paddr to match the tag. * The orig Cache Management Module "CDU" only required paddr to invalidate a * certain line since it sufficed as index in Non-Aliasing VIPT cache-geometry. * Infact for distinct V1,V2,P: all of {V1-P},{V2-P},{P-P} would end up fetching * the exact same line. * * However for larger Caches (way-size > page-size) - i.e. in Aliasing config, * paddr alone could not be used to correctly index the cache. * * ------------------ * MMU v1/v2 (Fixed Page Size 8k) * ------------------ * The solution was to provide CDU with these additonal vaddr bits. These * would be bits [x:13], x would depend on cache-geometry, 13 comes from * standard page size of 8k. * H/w folks chose [17:13] to be a future safe range, and moreso these 5 bits * of vaddr could easily be "stuffed" in the paddr as bits [4:0] since the * orig 5 bits of paddr were anyways ignored by CDU line ops, as they * represent the offset within cache-line. The adv of using this "clumsy" * interface for additional info was no new reg was needed in CDU programming * model. * * 17:13 represented the max num of bits passable, actual bits needed were * fewer, based on the num-of-aliases possible. * -for 2 alias possibility, only bit 13 needed (32K cache) * -for 4 alias possibility, bits 14:13 needed (64K cache) * * ------------------ * MMU v3 * ------------------ * This ver of MMU supports variable page sizes (1k-16k): although Linux will * only support 8k (default), 16k and 4k. * However from hardware perspective, smaller page sizes aggrevate aliasing * meaning more vaddr bits needed to disambiguate the cache-line-op ; * the existing scheme of piggybacking won't work for certain configurations. * Two new registers IC_PTAG and DC_PTAG inttoduced. * "tag" bits are provided in PTAG, index bits in existing IVIL/IVDL/FLDL regs */ /*********************************************************** * Machine specific helper for per line I-Cache invalidate. */ static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr, unsigned long sz) { unsigned long flags; int num_lines; /* * Ensure we properly floor/ceil the non-line aligned/sized requests: * However page sized flushes can be compile time optimised. * -@paddr will be cache-line aligned already (being page aligned) * -@sz will be integral multiple of line size (being page sized). */ if (!(__builtin_constant_p(sz) && sz == PAGE_SIZE)) { sz += paddr & ~ICACHE_LINE_MASK; paddr &= ICACHE_LINE_MASK; vaddr &= ICACHE_LINE_MASK; } num_lines = DIV_ROUND_UP(sz, ARC_ICACHE_LINE_LEN); #if (CONFIG_ARC_MMU_VER <= 2) /* bits 17:13 of vaddr go as bits 4:0 of paddr */ paddr |= (vaddr >> PAGE_SHIFT) & 0x1F; #endif local_irq_save(flags); while (num_lines-- > 0) { #if (CONFIG_ARC_MMU_VER > 2) /* tag comes from phy addr */ write_aux_reg(ARC_REG_IC_PTAG, paddr); /* index bits come from vaddr */ write_aux_reg(ARC_REG_IC_IVIL, vaddr); vaddr += ARC_ICACHE_LINE_LEN; #else /* paddr contains stuffed vaddrs bits */ write_aux_reg(ARC_REG_IC_IVIL, paddr); #endif paddr += ARC_ICACHE_LINE_LEN; } local_irq_restore(flags); } #else #define __ic_line_inv_vaddr(pstart, vstart, sz) #endif /* CONFIG_ARC_HAS_ICACHE */ /*********************************************************** * Exported APIs */ /* * Handle cache congruency of kernel and userspace mappings of page when kernel * writes-to/reads-from * * The idea is to defer flushing of kernel mapping after a WRITE, possible if: * -dcache is NOT aliasing, hence any U/K-mappings of page are congruent * -U-mapping doesn't exist yet for page (finalised in update_mmu_cache) * -In SMP, if hardware caches are coherent * * There's a corollary case, where kernel READs from a userspace mapped page. * If the U-mapping is not congruent to to K-mapping, former needs flushing. */ void flush_dcache_page(struct page *page) { struct address_space *mapping; if (!cache_is_vipt_aliasing()) { set_bit(PG_arch_1, &page->flags); return; } /* don't handle anon pages here */ mapping = page_mapping(page); if (!mapping) return; /* * pagecache page, file not yet mapped to userspace * Make a note that K-mapping is dirty */ if (!mapping_mapped(mapping)) { set_bit(PG_arch_1, &page->flags); } else if (page_mapped(page)) { /* kernel reading from page with U-mapping */ void *paddr = page_address(page); unsigned long vaddr = page->index << PAGE_CACHE_SHIFT; if (addr_not_cache_congruent(paddr, vaddr)) __flush_dcache_page(paddr, vaddr); } } EXPORT_SYMBOL(flush_dcache_page); void dma_cache_wback_inv(unsigned long start, unsigned long sz) { __dc_line_op_k(start, sz, OP_FLUSH_N_INV); } EXPORT_SYMBOL(dma_cache_wback_inv); void dma_cache_inv(unsigned long start, unsigned long sz) { __dc_line_op_k(start, sz, OP_INV); } EXPORT_SYMBOL(dma_cache_inv); void dma_cache_wback(unsigned long start, unsigned long sz) { __dc_line_op_k(start, sz, OP_FLUSH); } EXPORT_SYMBOL(dma_cache_wback); /* * This is API for making I/D Caches consistent when modifying * kernel code (loadable modules, kprobes, kgdb...) * This is called on insmod, with kernel virtual address for CODE of * the module. ARC cache maintenance ops require PHY address thus we * need to convert vmalloc addr to PHY addr */ void flush_icache_range(unsigned long kstart, unsigned long kend) { unsigned int tot_sz, off, sz; unsigned long phy, pfn; /* printk("Kernel Cache Cohenercy: %lx to %lx\n",kstart, kend); */ /* This is not the right API for user virtual address */ if (kstart < TASK_SIZE) { BUG_ON("Flush icache range for user virtual addr space"); return; } /* Shortcut for bigger flush ranges. * Here we don't care if this was kernel virtual or phy addr */ tot_sz = kend - kstart; if (tot_sz > PAGE_SIZE) { flush_cache_all(); return; } /* Case: Kernel Phy addr (0x8000_0000 onwards) */ if (likely(kstart > PAGE_OFFSET)) { /* * The 2nd arg despite being paddr will be used to index icache * This is OK since no alternate virtual mappings will exist * given the callers for this case: kprobe/kgdb in built-in * kernel code only. */ __sync_icache_dcache(kstart, kstart, kend - kstart); return; } /* * Case: Kernel Vaddr (0x7000_0000 to 0x7fff_ffff) * (1) ARC Cache Maintenance ops only take Phy addr, hence special * handling of kernel vaddr. * * (2) Despite @tot_sz being < PAGE_SIZE (bigger cases handled already), * it still needs to handle a 2 page scenario, where the range * straddles across 2 virtual pages and hence need for loop */ while (tot_sz > 0) { off = kstart % PAGE_SIZE; pfn = vmalloc_to_pfn((void *)kstart); phy = (pfn << PAGE_SHIFT) + off; sz = min_t(unsigned int, tot_sz, PAGE_SIZE - off); __sync_icache_dcache(phy, kstart, sz); kstart += sz; tot_sz -= sz; } } /* * General purpose helper to make I and D cache lines consistent. * @paddr is phy addr of region * @vaddr is typically user or kernel vaddr (vmalloc) * Howver in one instance, flush_icache_range() by kprobe (for a breakpt in * builtin kernel code) @vaddr will be paddr only, meaning CDU operation will * use a paddr to index the cache (despite VIPT). This is fine since since a * built-in kernel page will not have any virtual mappings (not even kernel) * kprobe on loadable module is different as it will have kvaddr. */ void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len) { unsigned long flags; local_irq_save(flags); __ic_line_inv_vaddr(paddr, vaddr, len); __dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV); local_irq_restore(flags); } /* wrapper to compile time eliminate alignment checks in flush loop */ void __inv_icache_page(unsigned long paddr, unsigned long vaddr) { __ic_line_inv_vaddr(paddr, vaddr, PAGE_SIZE); } /* * wrapper to clearout kernel or userspace mappings of a page * For kernel mappings @vaddr == @paddr */ void ___flush_dcache_page(unsigned long paddr, unsigned long vaddr) { __dc_line_op(paddr, vaddr & PAGE_MASK, PAGE_SIZE, OP_FLUSH_N_INV); } void flush_icache_all(void) { unsigned long flags; local_irq_save(flags); write_aux_reg(ARC_REG_IC_IVIC, 1); /* lr will not complete till the icache inv operation is not over */ read_aux_reg(ARC_REG_IC_CTRL); local_irq_restore(flags); } noinline void flush_cache_all(void) { unsigned long flags; local_irq_save(flags); flush_icache_all(); __dc_entire_op(OP_FLUSH_N_INV); local_irq_restore(flags); } #ifdef CONFIG_ARC_CACHE_VIPT_ALIASING void flush_cache_mm(struct mm_struct *mm) { flush_cache_all(); } void flush_cache_page(struct vm_area_struct *vma, unsigned long u_vaddr, unsigned long pfn) { unsigned int paddr = pfn << PAGE_SHIFT; __sync_icache_dcache(paddr, u_vaddr, PAGE_SIZE); } void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { flush_cache_all(); } void copy_user_highpage(struct page *to, struct page *from, unsigned long u_vaddr, struct vm_area_struct *vma) { void *kfrom = page_address(from); void *kto = page_address(to); int clean_src_k_mappings = 0; /* * If SRC page was already mapped in userspace AND it's U-mapping is * not congruent with K-mapping, sync former to physical page so that * K-mapping in memcpy below, sees the right data * * Note that while @u_vaddr refers to DST page's userspace vaddr, it is * equally valid for SRC page as well */ if (page_mapped(from) && addr_not_cache_congruent(kfrom, u_vaddr)) { __flush_dcache_page(kfrom, u_vaddr); clean_src_k_mappings = 1; } copy_page(kto, kfrom); /* * Mark DST page K-mapping as dirty for a later finalization by * update_mmu_cache(). Although the finalization could have been done * here as well (given that both vaddr/paddr are available). * But update_mmu_cache() already has code to do that for other * non copied user pages (e.g. read faults which wire in pagecache page * directly). */ set_bit(PG_arch_1, &to->flags); /* * if SRC was already usermapped and non-congruent to kernel mapping * sync the kernel mapping back to physical page */ if (clean_src_k_mappings) { __flush_dcache_page(kfrom, kfrom); } else { set_bit(PG_arch_1, &from->flags); } } void clear_user_page(void *to, unsigned long u_vaddr, struct page *page) { clear_page(to); set_bit(PG_arch_1, &page->flags); } void flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long u_vaddr) { /* TBD: do we really need to clear the kernel mapping */ __flush_dcache_page(page_address(page), u_vaddr); __flush_dcache_page(page_address(page), page_address(page)); } #endif /********************************************************************** * Explicit Cache flush request from user space via syscall * Needed for JITs which generate code on the fly */ SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags) { /* TBD: optimize this */ flush_cache_all(); return 0; }