// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2017 Pengutronix, Juergen Borleis */ #include #include #include #include #include "tag.h" /* To define the outgoing port and to discover the incoming port a regular * VLAN tag is used by the LAN9303. But its VID meaning is 'special': * * Dest MAC Src MAC TAG Type * ...| 1 2 3 4 5 6 | 1 2 3 4 5 6 | 1 2 3 4 | 1 2 |... * |<------->| * TAG: * |<------------->| * | 1 2 | 3 4 | * TPID VID * 0x8100 * * VID bit 3 indicates a request for an ALR lookup. * * If VID bit 3 is zero, then bits 0 and 1 specify the destination port * (0, 1, 2) or broadcast (3) or the source port (1, 2). * * VID bit 4 is used to specify if the STP port state should be overridden. * Required when no forwarding between the external ports should happen. */ #define LAN9303_NAME "lan9303" #define LAN9303_TAG_LEN 4 # define LAN9303_TAG_TX_USE_ALR BIT(3) # define LAN9303_TAG_TX_STP_OVERRIDE BIT(4) # define LAN9303_TAG_RX_IGMP BIT(3) # define LAN9303_TAG_RX_STP BIT(4) # define LAN9303_TAG_RX_TRAPPED_TO_CPU (LAN9303_TAG_RX_IGMP | \ LAN9303_TAG_RX_STP) /* Decide whether to transmit using ALR lookup, or transmit directly to * port using tag. ALR learning is performed only when using ALR lookup. * If the two external ports are bridged and the frame is unicast, * then use ALR lookup to allow ALR learning on CPU port. * Otherwise transmit directly to port with STP state override. * See also: lan9303_separate_ports() and lan9303.pdf 6.4.10.1 */ static int lan9303_xmit_use_arl(struct dsa_port *dp, u8 *dest_addr) { struct lan9303 *chip = dp->ds->priv; return chip->is_bridged && !is_multicast_ether_addr(dest_addr); } static struct sk_buff *lan9303_xmit(struct sk_buff *skb, struct net_device *dev) { struct dsa_port *dp = dsa_slave_to_port(dev); __be16 *lan9303_tag; u16 tag; /* provide 'LAN9303_TAG_LEN' bytes additional space */ skb_push(skb, LAN9303_TAG_LEN); /* make room between MACs and Ether-Type */ dsa_alloc_etype_header(skb, LAN9303_TAG_LEN); lan9303_tag = dsa_etype_header_pos_tx(skb); tag = lan9303_xmit_use_arl(dp, skb->data) ? LAN9303_TAG_TX_USE_ALR : dp->index | LAN9303_TAG_TX_STP_OVERRIDE; lan9303_tag[0] = htons(ETH_P_8021Q); lan9303_tag[1] = htons(tag); return skb; } static struct sk_buff *lan9303_rcv(struct sk_buff *skb, struct net_device *dev) { u16 lan9303_tag1; unsigned int source_port; if (unlikely(!pskb_may_pull(skb, LAN9303_TAG_LEN))) { dev_warn_ratelimited(&dev->dev, "Dropping packet, cannot pull\n"); return NULL; } if (skb_vlan_tag_present(skb)) { lan9303_tag1 = skb_vlan_tag_get(skb); __vlan_hwaccel_clear_tag(skb); } else { skb_push_rcsum(skb, ETH_HLEN); __skb_vlan_pop(skb, &lan9303_tag1); skb_pull_rcsum(skb, ETH_HLEN); } source_port = lan9303_tag1 & 0x3; skb->dev = dsa_master_find_slave(dev, 0, source_port); if (!skb->dev) { dev_warn_ratelimited(&dev->dev, "Dropping packet due to invalid source port\n"); return NULL; } if (!(lan9303_tag1 & LAN9303_TAG_RX_TRAPPED_TO_CPU)) dsa_default_offload_fwd_mark(skb); return skb; } static const struct dsa_device_ops lan9303_netdev_ops = { .name = LAN9303_NAME, .proto = DSA_TAG_PROTO_LAN9303, .xmit = lan9303_xmit, .rcv = lan9303_rcv, .needed_headroom = LAN9303_TAG_LEN, }; MODULE_LICENSE("GPL"); MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_LAN9303, LAN9303_NAME); module_dsa_tag_driver(lan9303_netdev_ops);