delta/linux.git/drivers/net, branch master

net: mscc: ocelot: fix stat counter register values

2023-05-10T11:11:18+00:00

Commit d4c367650704 ("net: mscc: ocelot: keep ocelot_stat_layout by reg
address, not offset") organized the stats counters for Ocelot chips, namely
the VSC7512 and VSC7514. A few of the counter offsets were incorrect, and
were caught by this warning:

WARNING: CPU: 0 PID: 24 at drivers/net/ethernet/mscc/ocelot_stats.c:909
ocelot_stats_init+0x1fc/0x2d8
reg 0x5000078 had address 0x220 but reg 0x5000079 has address 0x214,
bulking broken!

Fix these register offsets.

Fixes: d4c367650704 ("net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset")
Signed-off-by: Colin Foster 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller

ipvlan:Fix out-of-bounds caused by unclear skb->cb

2023-05-10T09:33:06+00:00

If skb enqueue the qdisc, fq_skb_cb(skb)->time_to_send is changed which
is actually skb->cb, and IPCB(skb_in)->opt will be used in
__ip_options_echo. It is possible that memcpy is out of bounds and lead
to stack overflow.
We should clear skb->cb before ip_local_out or ip6_local_out.

v2:
1. clean the stack info
2. use IPCB/IP6CB instead of skb->cb

crash on stable-5.10(reproduce in kasan kernel).
Stack info:
[ 2203.651571] BUG: KASAN: stack-out-of-bounds in
__ip_options_echo+0x589/0x800
[ 2203.653327] Write of size 4 at addr ffff88811a388f27 by task
swapper/3/0
[ 2203.655460] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted
5.10.0-60.18.0.50.h856.kasan.eulerosv2r11.x86_64 #1
[ 2203.655466] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.10.2-0-g5f4c7b1-20181220_000000-szxrtosci10000 04/01/2014
[ 2203.655475] Call Trace:
[ 2203.655481]  
[ 2203.655501]  dump_stack+0x9c/0xd3
[ 2203.655514]  print_address_description.constprop.0+0x19/0x170
[ 2203.655530]  __kasan_report.cold+0x6c/0x84
[ 2203.655586]  kasan_report+0x3a/0x50
[ 2203.655594]  check_memory_region+0xfd/0x1f0
[ 2203.655601]  memcpy+0x39/0x60
[ 2203.655608]  __ip_options_echo+0x589/0x800
[ 2203.655654]  __icmp_send+0x59a/0x960
[ 2203.655755]  nf_send_unreach+0x129/0x3d0 [nf_reject_ipv4]
[ 2203.655763]  reject_tg+0x77/0x1bf [ipt_REJECT]
[ 2203.655772]  ipt_do_table+0x691/0xa40 [ip_tables]
[ 2203.655821]  nf_hook_slow+0x69/0x100
[ 2203.655828]  __ip_local_out+0x21e/0x2b0
[ 2203.655857]  ip_local_out+0x28/0x90
[ 2203.655868]  ipvlan_process_v4_outbound+0x21e/0x260 [ipvlan]
[ 2203.655931]  ipvlan_xmit_mode_l3+0x3bd/0x400 [ipvlan]
[ 2203.655967]  ipvlan_queue_xmit+0xb3/0x190 [ipvlan]
[ 2203.655977]  ipvlan_start_xmit+0x2e/0xb0 [ipvlan]
[ 2203.655984]  xmit_one.constprop.0+0xe1/0x280
[ 2203.655992]  dev_hard_start_xmit+0x62/0x100
[ 2203.656000]  sch_direct_xmit+0x215/0x640
[ 2203.656028]  __qdisc_run+0x153/0x1f0
[ 2203.656069]  __dev_queue_xmit+0x77f/0x1030
[ 2203.656173]  ip_finish_output2+0x59b/0xc20
[ 2203.656244]  __ip_finish_output.part.0+0x318/0x3d0
[ 2203.656312]  ip_finish_output+0x168/0x190
[ 2203.656320]  ip_output+0x12d/0x220
[ 2203.656357]  __ip_queue_xmit+0x392/0x880
[ 2203.656380]  __tcp_transmit_skb+0x1088/0x11c0
[ 2203.656436]  __tcp_retransmit_skb+0x475/0xa30
[ 2203.656505]  tcp_retransmit_skb+0x2d/0x190
[ 2203.656512]  tcp_retransmit_timer+0x3af/0x9a0
[ 2203.656519]  tcp_write_timer_handler+0x3ba/0x510
[ 2203.656529]  tcp_write_timer+0x55/0x180
[ 2203.656542]  call_timer_fn+0x3f/0x1d0
[ 2203.656555]  expire_timers+0x160/0x200
[ 2203.656562]  run_timer_softirq+0x1f4/0x480
[ 2203.656606]  __do_softirq+0xfd/0x402
[ 2203.656613]  asm_call_irq_on_stack+0x12/0x20
[ 2203.656617]  
[ 2203.656623]  do_softirq_own_stack+0x37/0x50
[ 2203.656631]  irq_exit_rcu+0x134/0x1a0
[ 2203.656639]  sysvec_apic_timer_interrupt+0x36/0x80
[ 2203.656646]  asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 2203.656654] RIP: 0010:default_idle+0x13/0x20
[ 2203.656663] Code: 89 f0 5d 41 5c 41 5d 41 5e c3 cc cc cc cc cc cc cc
cc cc cc cc cc cc 0f 1f 44 00 00 0f 1f 44 00 00 0f 00 2d 9f 32 57 00 fb
f4  cc cc cc cc 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 be 08
[ 2203.656668] RSP: 0018:ffff88810036fe78 EFLAGS: 00000256
[ 2203.656676] RAX: ffffffffaf2a87f0 RBX: ffff888100360000 RCX:
ffffffffaf290191
[ 2203.656681] RDX: 0000000000098b5e RSI: 0000000000000004 RDI:
ffff88811a3c4f60
[ 2203.656686] RBP: 0000000000000000 R08: 0000000000000001 R09:
ffff88811a3c4f63
[ 2203.656690] R10: ffffed10234789ec R11: 0000000000000001 R12:
0000000000000003
[ 2203.656695] R13: ffff888100360000 R14: 0000000000000000 R15:
0000000000000000
[ 2203.656729]  default_idle_call+0x5a/0x150
[ 2203.656735]  cpuidle_idle_call+0x1c6/0x220
[ 2203.656780]  do_idle+0xab/0x100
[ 2203.656786]  cpu_startup_entry+0x19/0x20
[ 2203.656793]  secondary_startup_64_no_verify+0xc2/0xcb

[ 2203.657409] The buggy address belongs to the page:
[ 2203.658648] page:0000000027a9842f refcount:1 mapcount:0
mapping:0000000000000000 index:0x0 pfn:0x11a388
[ 2203.658665] flags:
0x17ffffc0001000(reserved|node=0|zone=2|lastcpupid=0x1fffff)
[ 2203.658675] raw: 0017ffffc0001000 ffffea000468e208 ffffea000468e208
0000000000000000
[ 2203.658682] raw: 0000000000000000 0000000000000000 00000001ffffffff
0000000000000000
[ 2203.658686] page dumped because: kasan: bad access detected

To reproduce(ipvlan with IPVLAN_MODE_L3):
Env setting:
=======================================================
modprobe ipvlan ipvlan_default_mode=1
sysctl net.ipv4.conf.eth0.forwarding=1
iptables -t nat -A POSTROUTING -s 20.0.0.0/255.255.255.0 -o eth0 -j
MASQUERADE
ip link add gw link eth0 type ipvlan
ip -4 addr add 20.0.0.254/24 dev gw
ip netns add net1
ip link add ipv1 link eth0 type ipvlan
ip link set ipv1 netns net1
ip netns exec net1 ip link set ipv1 up
ip netns exec net1 ip -4 addr add 20.0.0.4/24 dev ipv1
ip netns exec net1 route add default gw 20.0.0.254
ip netns exec net1 tc qdisc add dev ipv1 root netem loss 10%
ifconfig gw up
iptables -t filter -A OUTPUT -p tcp --dport 8888 -j REJECT --reject-with
icmp-port-unreachable
=======================================================
And then excute the shell(curl any address of eth0 can reach):

for((i=1;i<=100000;i++))
do
        ip netns exec net1 curl x.x.x.x:8888
done
=======================================================

Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: "t.feng" 
Suggested-by: Florian Westphal 
Reviewed-by: Paolo Abeni 
Signed-off-by: David S. Miller

gve: Remove the code of clearing PBA bit

2023-05-10T09:30:46+00:00

Clearing the PBA bit from the driver is race prone and it may lead to
dropped interrupt events. This could potentially lead to the traffic
being completely halted.

Fixes: 5e8c5adf95f8 ("gve: DQO: Add core netdev features")
Signed-off-by: Ziwei Xiao 
Signed-off-by: Bailey Forrest 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller

net: add vlan_get_protocol_and_depth() helper

2023-05-10T09:25:55+00:00

Before blamed commit, pskb_may_pull() was used instead
of skb_header_pointer() in __vlan_get_protocol() and friends.

Few callers depended on skb->head being populated with MAC header,
syzbot caught one of them (skb_mac_gso_segment())

Add vlan_get_protocol_and_depth() to make the intent clearer
and use it where sensible.

This is a more generic fix than commit e9d3f80935b6
("net/af_packet: make sure to pull mac header") which was
dealing with a similar issue.

kernel BUG at include/linux/skbuff.h:2655 !
invalid opcode: 0000 [#1] SMP KASAN
CPU: 0 PID: 1441 Comm: syz-executor199 Not tainted 6.1.24-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023
RIP: 0010:__skb_pull include/linux/skbuff.h:2655 [inline]
RIP: 0010:skb_mac_gso_segment+0x68f/0x6a0 net/core/gro.c:136
Code: fd 48 8b 5c 24 10 44 89 6b 70 48 c7 c7 c0 ae 0d 86 44 89 e6 e8 a1 91 d0 00 48 c7 c7 00 af 0d 86 48 89 de 31 d2 e8 d1 4a e9 ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41
RSP: 0018:ffffc90001bd7520 EFLAGS: 00010286
RAX: ffffffff8469736a RBX: ffff88810f31dac0 RCX: ffff888115a18b00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc90001bd75e8 R08: ffffffff84697183 R09: fffff5200037adf9
R10: 0000000000000000 R11: dffffc0000000001 R12: 0000000000000012
R13: 000000000000fee5 R14: 0000000000005865 R15: 000000000000fed7
FS: 000055555633f300(0000) GS:ffff8881f6a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000000 CR3: 0000000116fea000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:

[] __skb_gso_segment+0x32d/0x4c0 net/core/dev.c:3419
[] skb_gso_segment include/linux/netdevice.h:4819 [inline]
[] validate_xmit_skb+0x3aa/0xee0 net/core/dev.c:3725
[] __dev_queue_xmit+0x1332/0x3300 net/core/dev.c:4313
[] dev_queue_xmit+0x17/0x20 include/linux/netdevice.h:3029
[] packet_snd net/packet/af_packet.c:3111 [inline]
[] packet_sendmsg+0x49d2/0x6470 net/packet/af_packet.c:3142
[] sock_sendmsg_nosec net/socket.c:716 [inline]
[] sock_sendmsg net/socket.c:736 [inline]
[] __sys_sendto+0x472/0x5f0 net/socket.c:2139
[] __do_sys_sendto net/socket.c:2151 [inline]
[] __se_sys_sendto net/socket.c:2147 [inline]
[] __x64_sys_sendto+0xe5/0x100 net/socket.c:2147
[] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[] do_syscall_64+0x2f/0x50 arch/x86/entry/common.c:80
[] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 469aceddfa3e ("vlan: consolidate VLAN parsing code and limit max parsing depth")
Reported-by: syzbot 
Signed-off-by: Eric Dumazet 
Cc: Toke Høiland-Jørgensen 
Cc: Willem de Bruijn 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller

net: pcs: xpcs: fix incorrect number of interfaces

2023-05-10T09:25:02+00:00

In synopsys_xpcs_compat[], the DW_XPCS_2500BASEX entry was setting
the number of interfaces using the xpcs_2500basex_features array
rather than xpcs_2500basex_interfaces. This causes us to overflow
the array of interfaces. Fix this.

Fixes: f27abde3042a ("net: pcs: add 2500BASEX support for Intel mGbE controller")
Signed-off-by: Russell King (Oracle) 
Reviewed-by: Andrew Lunn 
Reviewed-by: Leon Romanovsky 
Signed-off-by: David S. Miller

bonding: fix send_peer_notif overflow

2023-05-10T08:27:20+00:00

Bonding send_peer_notif was defined as u8. Since commit 07a4ddec3ce9
("bonding: add an option to specify a delay between peer notifications").
the bond->send_peer_notif will be num_peer_notif multiplied by
peer_notif_delay, which is u8 * u32. This would cause the send_peer_notif
overflow easily. e.g.

  ip link add bond0 type bond mode 1 miimon 100 num_grat_arp 30 peer_notify_delay 1000

To fix the overflow, let's set the send_peer_notif to u32 and limit
peer_notif_delay to 300s.

Reported-by: Liang Li 
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2090053
Fixes: 07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications")
Signed-off-by: Hangbin Liu 
Signed-off-by: David S. Miller

net: ethernet: mtk_eth_soc: fix NULL pointer dereference

2023-05-10T08:23:53+00:00

Check for NULL pointer to avoid kernel crashing in case of missing WO
firmware in case only a single WEDv2 device has been initialized, e.g. on
MT7981 which can connect just one wireless frontend.

Fixes: 86ce0d09e424 ("net: ethernet: mtk_eth_soc: use WO firmware for MT7981")
Signed-off-by: Daniel Golle 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller

net: phy: bcm7xx: Correct read from expansion register

2023-05-10T03:25:52+00:00

Since the driver works in the "legacy" addressing mode, we need to write
to the expansion register (0x17) with bits 11:8 set to 0xf to properly
select the expansion register passed as argument.

Fixes: f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165")
Signed-off-by: Florian Fainelli 
Reviewed-by: Simon Horman 
Link: https://lore.kernel.org/r/20230508231749.1681169-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski

net: stmmac: Initialize MAC_ONEUS_TIC_COUNTER register

2023-05-10T02:42:59+00:00

Initialize MAC_ONEUS_TIC_COUNTER register with correct value derived
from CSR clock, otherwise EEE is unstable on at least NXP i.MX8M Plus
and Micrel KSZ9131RNX PHY, to the point where not even ARP request can
be sent out.

i.MX 8M Plus Applications Processor Reference Manual, Rev. 1, 06/2021
11.7.6.1.34 One-microsecond Reference Timer (MAC_ONEUS_TIC_COUNTER)
defines this register as:
"
This register controls the generation of the Reference time (1 microsecond
tic) for all the LPI timers. This timer has to be programmed by the software
initially.
...
The application must program this counter so that the number of clock cycles
of CSR clock is 1us. (Subtract 1 from the value before programming).
For example if the CSR clock is 100MHz then this field needs to be programmed
to value 100 - 1 = 99 (which is 0x63).
This is required to generate the 1US events that are used to update some of
the EEE related counters.
"

The reset value is 0x63 on i.MX8M Plus, which means expected CSR clock are
100 MHz. However, the i.MX8M Plus "enet_qos_root_clk" are 266 MHz instead,
which means the LPI timers reach their count much sooner on this platform.

This is visible using a scope by monitoring e.g. exit from LPI mode on TX_CTL
line from MAC to PHY. This should take 30us per STMMAC_DEFAULT_TWT_LS setting,
during which the TX_CTL line transitions from tristate to low, and 30 us later
from low to high. On i.MX8M Plus, this transition takes 11 us, which matches
the 30us * 100/266 formula for misconfigured MAC_ONEUS_TIC_COUNTER register.

Configure MAC_ONEUS_TIC_COUNTER based on CSR clock, so that the LPI timers
have correct 1us reference. This then fixes EEE on i.MX8M Plus with Micrel
KSZ9131RNX PHY.

Fixes: 477286b53f55 ("stmmac: add GMAC4 core support")
Signed-off-by: Marek Vasut 
Tested-by: Harald Seiler 
Reviewed-by: Francesco Dolcini 
Tested-by: Francesco Dolcini  # Toradex Verdin iMX8MP
Reviewed-by: Jesse Brandeburg 
Link: https://lore.kernel.org/r/20230506235845.246105-1-marex@denx.de
Signed-off-by: Jakub Kicinski

net: mdio: mvusb: Fix an error handling path in mvusb_mdio_probe()

2023-05-07T13:59:02+00:00

Should of_mdiobus_register() fail, a previous usb_get_dev() call should be
undone as in the .disconnect function.

Fixes: 04e37d92fbed ("net: phy: add marvell usb to mdio controller")
Signed-off-by: Christophe JAILLET 
Reviewed-by: Simon Horman 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller