[PATCH] m68knommu: remove DrangonEngine2 specific config code

Remove DragonEngine2 specific config code. Use common 68VZ328 config
code now.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 0 insertions, 191 deletions

diff --git a/arch/m68knommu/platform/68VZ328/de2/config.c b/arch/m68knommu/platform/68VZ328/de2/config.c
deleted file mode 100644
index d0586197f113..000000000000
--- a/arch/m68knommu/platform/68VZ328/de2/config.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- *  linux/arch/m68knommu/platform/MC68VZ328/de2/config.c
- *
- *  Copyright (C) 1993 Hamish Macdonald
- *  Copyright (C) 1999 D. Jeff Dionne
- *  Copyright (C) 2001 Georges Menie, Ken Desmet
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/config.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/kd.h>
-#include <linux/netdevice.h>
-
-#include <asm/setup.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/MC68VZ328.h>
-
-#ifdef CONFIG_INIT_LCD
-#include "screen.h"
-#endif
-
-/* with a 33.16 MHz clock, this will give usec resolution to the time functions */
-#define CLOCK_SOURCE TCTL_CLKSOURCE_SYSCLK
-#define CLOCK_PRE 7
-#define TICKS_PER_JIFFY 41450
-
-static void
-dragen2_sched_init(irqreturn_t (*timer_routine) (int, void *, struct pt_regs *))
-{
-	/* disable timer 1 */
-	TCTL = 0;
-
-	/* set ISR */
-	if (request_irq(TMR_IRQ_NUM, timer_routine, IRQ_FLG_LOCK, "timer", NULL)) 
-		panic("Unable to attach timer interrupt\n");
-
-	/* Restart mode, Enable int, Set clock source */
-	TCTL = TCTL_OM | TCTL_IRQEN | CLOCK_SOURCE;
-	TPRER = CLOCK_PRE;
-	TCMP = TICKS_PER_JIFFY;
-
-	/* Enable timer 1 */
-	TCTL |= TCTL_TEN;
-}
-
-static void dragen2_tick(void)
-{
-	/* Reset Timer1 */
-	TSTAT &= 0;
-}
-
-static unsigned long dragen2_gettimeoffset(void)
-{
-	unsigned long ticks = TCN, offset = 0;
-
-	/* check for pending interrupt */
-	if (ticks < (TICKS_PER_JIFFY >> 1) && (ISR & (1 << TMR_IRQ_NUM)))
-		offset = 1000000 / HZ;
-
-	ticks = (ticks * 1000000 / HZ) / TICKS_PER_JIFFY;
-
-	return ticks + offset;
-}
-
-static void dragen2_gettod(int *year, int *mon, int *day, int *hour,
-						   int *min, int *sec)
-{
-	long now = RTCTIME;
-
-	*year = *mon = *day = 1;
-	*hour = (now >> 24) % 24;
-	*min = (now >> 16) % 60;
-	*sec = now % 60;
-}
-
-static void dragen2_reset(void)
-{
-	local_irq_disable();
-
-#ifdef CONFIG_INIT_LCD
-	PBDATA |= 0x20;				/* disable CCFL light */
-	PKDATA |= 0x4;				/* disable LCD controller */
-	LCKCON = 0;
-#endif
-
-	__asm__ __volatile__(
-		"reset\n\t"
-		"moveal #0x04000000, %a0\n\t"
-		"moveal 0(%a0), %sp\n\t"
-		"moveal 4(%a0), %a0\n\t"
-		"jmp (%a0)"
-	);
-}
-
-static void init_hardware(void)
-{
-#ifdef CONFIG_DIRECT_IO_ACCESS
-	SCR = 0x10;					/* allow user access to internal registers */
-#endif
-
-	/* CSGB Init */
-	CSGBB = 0x4000;
-	CSB = 0x1a1;
-
-	/* CS8900 init */
-	/* PK3: hardware sleep function pin, active low */
-	PKSEL |= PK(3);				/* select pin as I/O */
-	PKDIR |= PK(3);				/* select pin as output */
-	PKDATA |= PK(3);			/* set pin high */
-
-	/* PF5: hardware reset function pin, active high */
-	PFSEL |= PF(5);				/* select pin as I/O */
-	PFDIR |= PF(5);				/* select pin as output */
-	PFDATA &= ~PF(5);			/* set pin low */
-
-	/* cs8900 hardware reset */
-	PFDATA |= PF(5);
-	{ int i; for (i = 0; i < 32000; ++i); }
-	PFDATA &= ~PF(5);
-
-	/* INT1 enable (cs8900 IRQ) */
-	PDPOL &= ~PD(1);			/* active high signal */
-	PDIQEG &= ~PD(1);
-	PDIRQEN |= PD(1);			/* IRQ enabled */
-
-#ifdef CONFIG_68328_SERIAL_UART2
-	/* Enable RXD TXD port bits to enable UART2 */
-	PJSEL &= ~(PJ(5) | PJ(4));
-#endif
-
-#ifdef CONFIG_INIT_LCD
-	/* initialize LCD controller */
-	LSSA = (long) screen_bits;
-	LVPW = 0x14;
-	LXMAX = 0x140;
-	LYMAX = 0xef;
-	LRRA = 0;
-	LPXCD = 3;
-	LPICF = 0x08;
-	LPOLCF = 0;
-	LCKCON = 0x80;
-	PCPDEN = 0xff;
-	PCSEL = 0;
-
-	/* Enable LCD controller */
-	PKDIR |= 0x4;
-	PKSEL |= 0x4;
-	PKDATA &= ~0x4;
-
-	/* Enable CCFL backlighting circuit */
-	PBDIR |= 0x20;
-	PBSEL |= 0x20;
-	PBDATA &= ~0x20;
-
-	/* contrast control register */
-	PFDIR |= 0x1;
-	PFSEL &= ~0x1;
-	PWMR = 0x037F;
-#endif
-}
-
-void config_BSP(char *command, int size)
-{
-	printk(KERN_INFO "68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n");
-
-#if defined(CONFIG_BOOTPARAM)
-	strncpy(command, CONFIG_BOOTPARAM_STRING, size);
-	command[size-1] = 0;
-#else
-	memset(command, 0, size);
-#endif
-
-	init_hardware();
-
-	mach_sched_init = (void *)dragen2_sched_init;
-	mach_tick = dragen2_tick;
-	mach_gettimeoffset = dragen2_gettimeoffset;
-	mach_reset = dragen2_reset;
-	mach_gettod = dragen2_gettod;
-}