diff options
Diffstat (limited to 'arch/arm')
42 files changed, 270 insertions, 148 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c208fd97c180..0d21f79b2fed 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1283,6 +1283,20 @@ config ARM_ERRATA_364296 processor into full low interrupt latency mode. ARM11MPCore is not affected. +config ARM_ERRATA_764369 + bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" + depends on CPU_V7 && SMP + help + This option enables the workaround for erratum 764369 + affecting Cortex-A9 MPCore with two or more processors (all + current revisions). Under certain timing circumstances, a data + cache line maintenance operation by MVA targeting an Inner + Shareable memory region may fail to proceed up to either the + Point of Coherency or to the Point of Unification of the + system. This workaround adds a DSB instruction before the + relevant cache maintenance functions and sets a specific bit + in the diagnostic control register of the SCU. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 81cbe40c159c..b3dc1fa30848 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -65,13 +65,71 @@ config DEBUG_USER # These options are only for real kernel hackers who want to get their hands dirty. config DEBUG_LL - bool "Kernel low-level debugging functions" + bool "Kernel low-level debugging functions (read help!)" depends on DEBUG_KERNEL help Say Y here to include definitions of printascii, printch, printhex in the kernel. This is helpful if you are debugging code that executes before the console is initialized. + Note that selecting this option will limit the kernel to a single + UART definition, as specified below. Attempting to boot the kernel + image on a different platform *will not work*, so this option should + not be enabled for kernels that are intended to be portable. + +choice + prompt "Kernel low-level debugging port" + depends on DEBUG_LL + + config DEBUG_LL_UART_NONE + bool "No low-level debugging UART" + help + Say Y here if your platform doesn't provide a UART option + below. This relies on your platform choosing the right UART + definition internally in order for low-level debugging to + work. + + config DEBUG_ICEDCC + bool "Kernel low-level debugging via EmbeddedICE DCC channel" + help + Say Y here if you want the debug print routines to direct + their output to the EmbeddedICE macrocell's DCC channel using + co-processor 14. This is known to work on the ARM9 style ICE + channel and on the XScale with the PEEDI. + + Note that the system will appear to hang during boot if there + is nothing connected to read from the DCC. + + config DEBUG_FOOTBRIDGE_COM1 + bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the 8250 at PCI COM1. + + config DEBUG_DC21285_PORT + bool "Kernel low-level debugging messages via footbridge serial port" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the serial port in the DC21285 (Footbridge). + + config DEBUG_CLPS711X_UART1 + bool "Kernel low-level debugging messages via UART1" + depends on ARCH_CLPS711X + help + Say Y here if you want the debug print routines to direct + their output to the first serial port on these devices. + + config DEBUG_CLPS711X_UART2 + bool "Kernel low-level debugging messages via UART2" + depends on ARCH_CLPS711X + help + Say Y here if you want the debug print routines to direct + their output to the second serial port on these devices. + +endchoice + config EARLY_PRINTK bool "Early printk" depends on DEBUG_LL @@ -80,18 +138,6 @@ config EARLY_PRINTK kernel low-level debugging functions. Add earlyprintk to your kernel parameters to enable this console. -config DEBUG_ICEDCC - bool "Kernel low-level debugging via EmbeddedICE DCC channel" - depends on DEBUG_LL - help - Say Y here if you want the debug print routines to direct their - output to the EmbeddedICE macrocell's DCC channel using - co-processor 14. This is known to work on the ARM9 style ICE - channel and on the XScale with the PEEDI. - - It does include a timeout to ensure that the system does not - totally freeze when there is nothing connected to read. - config OC_ETM bool "On-chip ETM and ETB" select ARM_AMBA @@ -100,23 +146,6 @@ config OC_ETM buffer driver that will allow you to collect traces of the kernel code. -config DEBUG_DC21285_PORT - bool "Kernel low-level debugging messages via footbridge serial port" - depends on DEBUG_LL && FOOTBRIDGE - help - Say Y here if you want the debug print routines to direct their - output to the serial port in the DC21285 (Footbridge). Saying N - will cause the debug messages to appear on the first 16550 - serial port. - -config DEBUG_CLPS711X_UART2 - bool "Kernel low-level debugging messages via UART2" - depends on DEBUG_LL && ARCH_CLPS711X - help - Say Y here if you want the debug print routines to direct their - output to the second serial port on these devices. Saying N will - cause the debug messages to appear on the first serial port. - config DEBUG_S3C_UART depends on PLAT_SAMSUNG int "S3C UART to use for low-level debug" diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index 4c053340ce33..e5818668d091 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -57,14 +57,14 @@ }; sdhci@c8000200 { - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 155 0>; /* power, gpio PT3 */ + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ }; sdhci@c8000600 { - gpios = <&gpio 58 0>, /* cd, gpio PH2 */ - <&gpio 59 0>, /* wp, gpio PH3 */ - <&gpio 70 0>; /* power, gpio PI6 */ + cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index 1940cae00748..64cedca6fc79 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -21,8 +21,8 @@ }; sdhci@c8000400 { - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 70 0>; /* power, gpio PI6 */ + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; }; diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 8c73900da9ed..253cc86318bf 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -25,17 +25,17 @@ #ifdef CONFIG_SMP -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ smp_mb(); \ __asm__ __volatile__( \ - "1: ldrex %1, [%2]\n" \ + "1: ldrex %1, [%3]\n" \ " " insn "\n" \ - "2: strex %1, %0, [%2]\n" \ - " teq %1, #0\n" \ + "2: strex %2, %0, [%3]\n" \ + " teq %2, #0\n" \ " bne 1b\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -73,14 +73,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, #include <linux/preempt.h> #include <asm/domain.h> -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ __asm__ __volatile__( \ - "1: " T(ldr) " %1, [%2]\n" \ + "1: " T(ldr) " %1, [%3]\n" \ " " insn "\n" \ - "2: " T(str) " %0, [%2]\n" \ + "2: " T(str) " %0, [%3]\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -117,7 +117,7 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) int cmp = (encoded_op >> 24) & 15; int oparg = (encoded_op << 8) >> 20; int cmparg = (encoded_op << 20) >> 20; - int oldval = 0, ret; + int oldval = 0, ret, tmp; if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) oparg = 1 << oparg; @@ -129,19 +129,19 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) switch (op) { case FUTEX_OP_SET: - __futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("mov %0, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ADD: - __futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("add %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_OR: - __futex_atomic_op("orr %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("orr %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ANDN: - __futex_atomic_op("and %0, %1, %3", ret, oldval, uaddr, ~oparg); + __futex_atomic_op("and %0, %1, %4", ret, oldval, tmp, uaddr, ~oparg); break; case FUTEX_OP_XOR: - __futex_atomic_op("eor %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("eor %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; default: ret = -ENOSYS; diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 2c04ed5efeb5..c60a2944f95b 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -478,8 +478,8 @@ /* * Unimplemented (or alternatively implemented) syscalls */ -#define __IGNORE_fadvise64_64 1 -#define __IGNORE_migrate_pages 1 +#define __IGNORE_fadvise64_64 +#define __IGNORE_migrate_pages #endif /* __KERNEL__ */ #endif /* __ASM_ARM_UNISTD_H */ diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index 5b6d536cbfe3..8f5dd7963356 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -13,6 +13,7 @@ #include <asm/smp_scu.h> #include <asm/cacheflush.h> +#include <asm/cputype.h> #define SCU_CTRL 0x00 #define SCU_CONFIG 0x04 @@ -37,6 +38,15 @@ void scu_enable(void __iomem *scu_base) { u32 scu_ctrl; +#ifdef CONFIG_ARM_ERRATA_764369 + /* Cortex-A9 only */ + if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) { + scu_ctrl = __raw_readl(scu_base + 0x30); + if (!(scu_ctrl & 1)) + __raw_writel(scu_ctrl | 0x1, scu_base + 0x30); + } +#endif + scu_ctrl = __raw_readl(scu_base + SCU_CTRL); /* already enabled? */ if (scu_ctrl & 1) diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index bf977f8514f6..4e66f62b8d41 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -23,8 +23,10 @@ #if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK) #define ARM_EXIT_KEEP(x) x +#define ARM_EXIT_DISCARD(x) #else #define ARM_EXIT_KEEP(x) +#define ARM_EXIT_DISCARD(x) x #endif OUTPUT_ARCH(arm) @@ -39,6 +41,11 @@ jiffies = jiffies_64 + 4; SECTIONS { /* + * XXX: The linker does not define how output sections are + * assigned to input sections when there are multiple statements + * matching the same input section name. There is no documented + * order of matching. + * * unwind exit sections must be discarded before the rest of the * unwind sections get included. */ @@ -47,6 +54,9 @@ SECTIONS *(.ARM.extab.exit.text) ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text)) ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text)) + ARM_EXIT_DISCARD(EXIT_TEXT) + ARM_EXIT_DISCARD(EXIT_DATA) + EXIT_CALL #ifndef CONFIG_HOTPLUG *(.ARM.exidx.devexit.text) *(.ARM.extab.devexit.text) @@ -58,6 +68,8 @@ SECTIONS #ifndef CONFIG_SMP_ON_UP *(.alt.smp.init) #endif + *(.discard) + *(.discard.*) } #ifdef CONFIG_XIP_KERNEL @@ -279,9 +291,6 @@ SECTIONS STABS_DEBUG .comment 0 : { *(.comment) } - - /* Default discards */ - DISCARDS } /* diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S index 6bd83ed90afe..d87bfc397d39 100644 --- a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S +++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S @@ -8,7 +8,6 @@ * published by the Free Software Foundation. */ -#include <mach/hardware.h> #include <asm/hardware/entry-macro-gic.S> .macro disable_fiq diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h index 58bb03ae3cf4..4f16c9b79f78 100644 --- a/arch/arm/mach-cns3xxx/include/mach/system.h +++ b/arch/arm/mach-cns3xxx/include/mach/system.h @@ -13,7 +13,6 @@ #include <linux/io.h> #include <asm/proc-fns.h> -#include <mach/hardware.h> static inline void arch_idle(void) { diff --git a/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/arch/arm/mach-cns3xxx/include/mach/uncompress.h index de8ead9b91f7..a91b6058ab4f 100644 --- a/arch/arm/mach-cns3xxx/include/mach/uncompress.h +++ b/arch/arm/mach-cns3xxx/include/mach/uncompress.h @@ -8,7 +8,6 @@ */ #include <asm/mach-types.h> -#include <mach/hardware.h> #include <mach/cns3xxx.h> #define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index 06fd25d70aec..0f8fca48a5ed 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -49,7 +49,7 @@ static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata) return &cns3xxx_pcie[root->domain]; } -static struct cns3xxx_pcie *pdev_to_cnspci(struct pci_dev *dev) +static struct cns3xxx_pcie *pdev_to_cnspci(const struct pci_dev *dev) { return sysdata_to_cnspci(dev->sysdata); } diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index bd5394537c88..008d51407cd7 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -115,6 +115,32 @@ static struct spi_board_info da850evm_spi_info[] = { }, }; +#ifdef CONFIG_MTD +static void da850_evm_m25p80_notify_add(struct mtd_info *mtd) +{ + char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; + size_t retlen; + + if (!strcmp(mtd->name, "MAC-Address")) { + mtd->read(mtd, 0, ETH_ALEN, &retlen, mac_addr); + if (retlen == ETH_ALEN) + pr_info("Read MAC addr from SPI Flash: %pM\n", + mac_addr); + } +} + +static struct mtd_notifier da850evm_spi_notifier = { + .add = da850_evm_m25p80_notify_add, +}; + +static void da850_evm_setup_mac_addr(void) +{ + register_mtd_user(&da850evm_spi_notifier); +} +#else +static void da850_evm_setup_mac_addr(void) { } +#endif + static struct mtd_partition da850_evm_norflash_partition[] = { { .name = "bootloaders + env", @@ -1244,6 +1270,8 @@ static __init void da850_evm_init(void) if (ret) pr_warning("da850_evm_init: sata registration failed: %d\n", ret); + + da850_evm_setup_mac_addr(); } #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 47fd0bc3d3e7..fa59c097223d 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -243,7 +243,7 @@ #define PSC_STATE_DISABLE 2 #define PSC_STATE_ENABLE 3 -#define MDSTAT_STATE_MASK 0x1f +#define MDSTAT_STATE_MASK 0x3f #define MDCTL_FORCE BIT(31) #ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S index fb5e72b532b0..5f1e045a3ad1 100644 --- a/arch/arm/mach-davinci/sleep.S +++ b/arch/arm/mach-davinci/sleep.S @@ -217,7 +217,11 @@ ddr2clk_stop_done: ENDPROC(davinci_ddr_psc_config) CACHE_FLUSH: - .word arm926_flush_kern_cache_all +#ifdef CONFIG_CPU_V6 + .word v6_flush_kern_cache_all +#else + .word arm926_flush_kern_cache_all +#endif ENTRY(davinci_cpu_suspend_sz) .word . - davinci_cpu_suspend diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 83dce859886d..a9e0dae86a26 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -158,7 +158,7 @@ void __init dove_spi0_init(void) void __init dove_spi1_init(void) { - orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk()); + orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk()); } /***************************************************************************** diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c index 1561b036a9bf..86964d2e9e1b 100644 --- a/arch/arm/mach-exynos4/clock.c +++ b/arch/arm/mach-exynos4/clock.c @@ -899,8 +899,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "exynos4-fimc.0", + .name = "sclk_cam0", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 16), }, @@ -909,8 +908,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "exynos4-fimc.1", + .name = "sclk_cam1", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 20), }, @@ -1160,7 +1158,7 @@ void __init_or_cpufreq exynos4_setup_clocks(void) vpllsrc = clk_get_rate(&clk_vpllsrc.clk); vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), - __raw_readl(S5P_VPLL_CON1), pll_4650); + __raw_readl(S5P_VPLL_CON1), pll_4650c); clk_fout_apll.ops = &exynos4_fout_apll_ops; clk_fout_mpll.rate = mpll; diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c index 1ae059b7ad7b..ddd86864fb83 100644 --- a/arch/arm/mach-exynos4/mct.c +++ b/arch/arm/mach-exynos4/mct.c @@ -132,12 +132,18 @@ static cycle_t exynos4_frc_read(struct clocksource *cs) return ((cycle_t)hi << 32) | lo; } +static void exynos4_frc_resume(struct clocksource *cs) +{ + exynos4_mct_frc_start(0, 0); +} + struct clocksource mct_frc = { .name = "mct-frc", .rating = 400, .read = exynos4_frc_read, .mask = CLOCKSOURCE_MASK(64), .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .resume = exynos4_frc_resume, }; static void __init exynos4_clocksource_init(void) @@ -389,9 +395,11 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt) } /* Setup the local clock events for a CPU */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { exynos4_mct_tick_init(evt); + + return 0; } int local_timer_ack(void) diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c index 7c2282c6ba81..df6ef1b2f98b 100644 --- a/arch/arm/mach-exynos4/platsmp.c +++ b/arch/arm/mach-exynos4/platsmp.c @@ -106,6 +106,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu) */ spin_lock(&boot_lock); spin_unlock(&boot_lock); + + set_cpu_online(cpu, true); } int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) diff --git a/arch/arm/mach-exynos4/setup-keypad.c b/arch/arm/mach-exynos4/setup-keypad.c index 1ee0ebff111f..7862bfb5933d 100644 --- a/arch/arm/mach-exynos4/setup-keypad.c +++ b/arch/arm/mach-exynos4/setup-keypad.c @@ -19,15 +19,16 @@ void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) if (rows > 8) { /* Set all the necessary GPX2 pins: KP_ROW[0~7] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3), + S3C_GPIO_PULL_UP); /* Set all the necessary GPX3 pins: KP_ROW[8~] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX3(0), (rows - 8), - S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8), + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); } else { /* Set all the necessary GPX2 pins: KP_ROW[x] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), rows, - S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3), + S3C_GPIO_PULL_UP); } /* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */ diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index fcf0ae95651f..8cdc730dcb3a 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -32,6 +32,7 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/mtd/physmap.h> +#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -154,6 +155,7 @@ static struct map_desc ap_io_desc[] __initdata = { static void __init ap_map_io(void) { iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc)); + vga_base = PCI_MEMORY_VADDR; } #define INTEGRATOR_SC_VALID_INT 0x003fffff diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index dd56bfb351e3..11b86e5b71c2 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -27,7 +27,6 @@ #include <linux/spinlock.h> #include <linux/init.h> #include <linux/io.h> -#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -505,7 +504,6 @@ void __init pci_v3_preinit(void) pcibios_min_io = 0x6000; pcibios_min_mem = 0x00100000; - vga_base = PCI_MEMORY_VADDR; /* * Hook in our fault handler for PCI errors diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index ffd55b1c4396..b9b844683147 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3078,6 +3078,7 @@ static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_null, .parent = &secure_32k_fck, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -3085,6 +3086,7 @@ static struct clk wdt1_fck = { .name = "wdt1_fck", .ops = &clkops_null, .parent = &secure_32k_fck, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 2af0e3f00ce1..c0b6fbda3408 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3376,10 +3376,18 @@ int __init omap4xxx_clk_init(void) } else if (cpu_is_omap446x()) { cpu_mask = RATE_IN_4460; cpu_clkflg = CK_446X; + } else { + return 0; } clk_init(&omap2_clk_functions); - omap2_clk_disable_clkdm_control(); + + /* + * Must stay commented until all OMAP SoC drivers are + * converted to runtime PM, or drivers may start crashing + * + * omap2_clk_disable_clkdm_control(); + */ for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks); c++) diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index ab7db083f97f..8f0890685d7b 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -747,6 +747,7 @@ int clkdm_wakeup(struct clockdomain *clkdm) spin_lock_irqsave(&clkdm->lock, flags); clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED; ret = arch_clkdm->clkdm_wakeup(clkdm); + ret |= pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); return ret; } @@ -818,6 +819,7 @@ void clkdm_deny_idle(struct clockdomain *clkdm) spin_lock_irqsave(&clkdm->lock, flags); clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED; arch_clkdm->clkdm_deny_idle(clkdm); + pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); } diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 16743c7d6e8e..408193d8e044 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -192,6 +192,7 @@ static struct omap_hwmod_addr_space omap2430_usbhsotg_addrs[] = { .pa_end = OMAP243X_HS_BASE + SZ_4K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_core ->usbhsotg interface */ diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 3feb35911a32..472bf22d5e84 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -130,7 +130,6 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) } else { hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]); clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); - pwrdm_wait_transition(pwrdm); sleep_switch = FORCEWAKEUP_SWITCH; } } @@ -156,7 +155,6 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) return ret; } - pwrdm_wait_transition(pwrdm); pwrdm_state_switch(pwrdm); err: return ret; diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 9af08473bf10..ef71fdd40fc4 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -195,28 +195,35 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused) /** * pwrdm_init - set up the powerdomain layer - * @pwrdm_list: array of struct powerdomain pointers to register + * @pwrdms: array of struct powerdomain pointers to register * @custom_funcs: func pointers for arch specific implementations * - * Loop through the array of powerdomains @pwrdm_list, registering all - * that are available on the current CPU. If pwrdm_list is supplied - * and not null, all of the referenced powerdomains will be - * registered. No return value. XXX pwrdm_list is not really a - * "list"; it is an array. Rename appropriately. + * Loop through the array of powerdomains @pwrdms, registering all + * that are available on the current CPU. Also, program all + * powerdomain target state as ON; this is to prevent domains from + * hitting low power states (if bootloader has target states set to + * something other than ON) and potentially even losing context while + * PM is not fully initialized. The PM late init code can then program + * the desired target state for all the power domains. No return + * value. */ -void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs) +void pwrdm_init(struct powerdomain **pwrdms, struct pwrdm_ops *custom_funcs) { struct powerdomain **p = NULL; + struct powerdomain *temp_p; if (!custom_funcs) WARN(1, "powerdomain: No custom pwrdm functions registered\n"); else arch_pwrdm = custom_funcs; - if (pwrdm_list) { - for (p = pwrdm_list; *p; p++) + if (pwrdms) { + for (p = pwrdms; *p; p++) _pwrdm_register(*p); } + + list_for_each_entry(temp_p, &pwrdm_list, node) + pwrdm_set_next_pwrst(temp_p, PWRDM_POWER_ON); } /** diff --git a/arch/arm/mach-prima2/clock.c b/arch/arm/mach-prima2/clock.c index f9a2aaf63f71..615a4e75ceab 100644 --- a/arch/arm/mach-prima2/clock.c +++ b/arch/arm/mach-prima2/clock.c @@ -481,6 +481,7 @@ static void __init sirfsoc_clk_init(void) static struct of_device_id clkc_ids[] = { { .compatible = "sirf,prima2-clkc" }, + {}, }; void __init sirfsoc_of_clk_init(void) diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c index c3404cbb6ff7..7af254d046ba 100644 --- a/arch/arm/mach-prima2/irq.c +++ b/arch/arm/mach-prima2/irq.c @@ -51,6 +51,7 @@ static __init void sirfsoc_irq_init(void) static struct of_device_id intc_ids[] = { { .compatible = "sirf,prima2-intc" }, + {}, }; void __init sirfsoc_of_irq_init(void) diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c index d074786e83d4..492cfa8d2610 100644 --- a/arch/arm/mach-prima2/rstc.c +++ b/arch/arm/mach-prima2/rstc.c @@ -19,6 +19,7 @@ static DEFINE_MUTEX(rstc_lock); static struct of_device_id rstc_ids[] = { { .compatible = "sirf,prima2-rstc" }, + {}, }; static int __init sirfsoc_of_rstc_init(void) diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c index 44027f34a88a..ed7ec48d11da 100644 --- a/arch/arm/mach-prima2/timer.c +++ b/arch/arm/mach-prima2/timer.c @@ -190,6 +190,7 @@ static void __init sirfsoc_timer_init(void) static struct of_device_id timer_ids[] = { { .compatible = "sirf,prima2-tick" }, + {}, }; static void __init sirfsoc_of_timer_map(void) diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index a1a7176675b9..38058af48972 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -128,7 +128,7 @@ static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) unsigned long clkcon0; clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK; + clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK; clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; __raw_writel(clkcon0, S3C2443_CLKDIV0); } diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index ecbea92bf83b..a9f3183e0290 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -262,45 +262,6 @@ static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = { .cols = 8, }; -static int smdk6410_backlight_init(struct device *dev) -{ - int ret; - - ret = gpio_request(S3C64XX_GPF(15), "Backlight"); - if (ret) { - printk(KERN_ERR "failed to request GPF for PWM-OUT1\n"); - return ret; - } - - /* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */ - s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2)); - - return 0; -} - -static void smdk6410_backlight_exit(struct device *dev) -{ - s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT); - gpio_free(S3C64XX_GPF(15)); -} - -static struct platform_pwm_backlight_data smdk6410_backlight_data = { - .pwm_id = 1, - .max_brightness = 255, - .dft_brightness = 255, - .pwm_period_ns = 78770, - .init = smdk6410_backlight_init, - .exit = smdk6410_backlight_exit, -}; - -static struct platform_device smdk6410_backlight_device = { - .name = "pwm-backlight", - .dev = { - .parent = &s3c_device_timer[1].dev, - .platform_data = &smdk6410_backlight_data, - }, -}; - static struct map_desc smdk6410_iodesc[] = {}; static struct platform_device *smdk6410_devices[] __initdata = { diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index 52a8e607bcc2..f5f8fa89679c 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -815,8 +815,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "s5pv210-fimc.0", + .name = "sclk_cam0", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 3), }, @@ -825,8 +824,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "s5pv210-fimc.1", + .name = "sclk_cam1", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 4), }, diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 3b24bfa3b828..07c4bc8ea0a4 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -174,6 +174,10 @@ ENTRY(v7_coherent_user_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r12, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification add r12, r12, r2 @@ -223,6 +227,10 @@ ENTRY(v7_flush_kern_dcache_area) add r1, r0, r1 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line add r0, r0, r2 @@ -247,6 +255,10 @@ v7_dma_inv_range: sub r3, r2, #1 tst r0, r3 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line tst r1, r3 @@ -270,6 +282,10 @@ v7_dma_clean_range: dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c10, 1 @ clean D / U line add r0, r0, r2 @@ -288,6 +304,10 @@ ENTRY(v7_dma_flush_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line add r0, r0, r2 diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 0a0a1e7c20d2..c3ff82f92d9c 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -324,6 +324,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, if (addr) *handle = pfn_to_dma(dev, page_to_pfn(page)); + else + __dma_free_buffer(page, size); return addr; } diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 9a6a53854911..02609eee0562 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -615,6 +615,9 @@ static int _od_resume_noirq(struct device *dev) return pm_generic_resume_noirq(dev); } +#else +#define _od_suspend_noirq NULL +#define _od_resume_noirq NULL #endif static struct dev_pm_domain omap_device_pm_domain = { diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index f71078ef6bb5..f88216d23991 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -114,17 +114,18 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) { static int used_gpioint_groups = 0; int group = chip->group; - struct s5p_gpioint_bank *bank = NULL; + struct s5p_gpioint_bank *b, *bank = NULL; struct irq_chip_generic *gc; struct irq_chip_type *ct; if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT) return -ENOMEM; - list_for_each_entry(bank, &banks, list) { - if (group >= bank->start && - group < bank->start + bank->nr_groups) + list_for_each_entry(b, &banks, list) { + if (group >= b->start && group < b->start + b->nr_groups) { + bank = b; break; + } } if (!bank) return -EINVAL; diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 302c42670bd1..3b4451979d1b 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -64,6 +64,17 @@ static LIST_HEAD(clocks); */ DEFINE_SPINLOCK(clocks_lock); +/* Global watchdog clock used by arch_wtd_reset() callback */ +struct clk *s3c2410_wdtclk; +static int __init s3c_wdt_reset_init(void) +{ + s3c2410_wdtclk = clk_get(NULL, "watchdog"); + if (IS_ERR(s3c2410_wdtclk)) + printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + return 0; +} +arch_initcall(s3c_wdt_reset_init); + /* enable and disable calls for use with the clk struct */ static int clk_null_enable(struct clk *clk, int enable) diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 87d5b38a86fb..73c66d4d10fa 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -9,6 +9,9 @@ * published by the Free Software Foundation. */ +#ifndef __ASM_PLAT_CLOCK_H +#define __ASM_PLAT_CLOCK_H __FILE__ + #include <linux/spinlock.h> #include <linux/clkdev.h> @@ -121,3 +124,8 @@ extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable); extern void s3c_pwmclk_init(void); +/* Global watchdog clock used by arch_wtd_reset() callback */ + +extern struct clk *s3c2410_wdtclk; + +#endif /* __ASM_PLAT_CLOCK_H */ diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h index 54b762acb5a0..40dbb2b0ae22 100644 --- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h +++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include <plat/clock.h> #include <plat/regs-watchdog.h> #include <mach/map.h> @@ -19,17 +20,12 @@ static inline void arch_wdt_reset(void) { - struct clk *wdtclk; - printk("arch_reset: attempting watchdog reset\n"); __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ - wdtclk = clk_get(NULL, "watchdog"); - if (!IS_ERR(wdtclk)) { - clk_enable(wdtclk); - } else - printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + if (s3c2410_wdtclk) + clk_enable(s3c2410_wdtclk); /* put initial values into count and data */ __raw_writel(0x80, S3C2410_WTCNT); |