diff options
Diffstat (limited to 'drivers/net/ethernet/xscale/ixp2000/caleb.c')
| -rw-r--r-- | drivers/net/ethernet/xscale/ixp2000/caleb.c | 136 |
1 files changed, 0 insertions, 136 deletions
diff --git a/drivers/net/ethernet/xscale/ixp2000/caleb.c b/drivers/net/ethernet/xscale/ixp2000/caleb.c deleted file mode 100644 index 7dea5b95012c..000000000000 --- a/drivers/net/ethernet/xscale/ixp2000/caleb.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611 - * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/delay.h> -#include <asm/io.h> -#include "caleb.h" - -#define CALEB_IDLO 0x00 -#define CALEB_IDHI 0x01 -#define CALEB_RID 0x02 -#define CALEB_RESET 0x03 -#define CALEB_INTREN0 0x04 -#define CALEB_INTREN1 0x05 -#define CALEB_INTRSTAT0 0x06 -#define CALEB_INTRSTAT1 0x07 -#define CALEB_PORTEN 0x08 -#define CALEB_BURST 0x09 -#define CALEB_PORTPAUS 0x0A -#define CALEB_PORTPAUSD 0x0B -#define CALEB_PHY0RX 0x10 -#define CALEB_PHY1RX 0x11 -#define CALEB_PHY0TX 0x12 -#define CALEB_PHY1TX 0x13 -#define CALEB_IXPRX_HI_CNTR 0x15 -#define CALEB_PHY0RX_HI_CNTR 0x16 -#define CALEB_PHY1RX_HI_CNTR 0x17 -#define CALEB_IXPRX_CNTR 0x18 -#define CALEB_PHY0RX_CNTR 0x19 -#define CALEB_PHY1RX_CNTR 0x1A -#define CALEB_IXPTX_CNTR 0x1B -#define CALEB_PHY0TX_CNTR 0x1C -#define CALEB_PHY1TX_CNTR 0x1D -#define CALEB_DEBUG0 0x1E -#define CALEB_DEBUG1 0x1F - - -static u8 caleb_reg_read(int reg) -{ - u8 value; - - value = *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg)); - -// printk(KERN_INFO "caleb_reg_read(%d) = %.2x\n", reg, value); - - return value; -} - -static void caleb_reg_write(int reg, u8 value) -{ - u8 dummy; - -// printk(KERN_INFO "caleb_reg_write(%d, %.2x)\n", reg, value); - - *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg)) = value; - - dummy = *((volatile u8 *)ENP2611_CALEB_VIRT_BASE); - __asm__ __volatile__("mov %0, %0" : "+r" (dummy)); -} - - -void caleb_reset(void) -{ - /* - * Perform a chip reset. - */ - caleb_reg_write(CALEB_RESET, 0x02); - udelay(1); - - /* - * Enable all interrupt sources. This is needed to get - * meaningful results out of the status bits (register 6 - * and 7.) - */ - caleb_reg_write(CALEB_INTREN0, 0xff); - caleb_reg_write(CALEB_INTREN1, 0x07); - - /* - * Set RX and TX FIFO thresholds to 1.5kb. - */ - caleb_reg_write(CALEB_PHY0RX, 0x11); - caleb_reg_write(CALEB_PHY1RX, 0x11); - caleb_reg_write(CALEB_PHY0TX, 0x11); - caleb_reg_write(CALEB_PHY1TX, 0x11); - - /* - * Program SPI-3 burst size. - */ - caleb_reg_write(CALEB_BURST, 0); // 64-byte RBUF mpackets -// caleb_reg_write(CALEB_BURST, 1); // 128-byte RBUF mpackets -// caleb_reg_write(CALEB_BURST, 2); // 256-byte RBUF mpackets -} - -void caleb_enable_rx(int port) -{ - u8 temp; - - temp = caleb_reg_read(CALEB_PORTEN); - temp |= 1 << port; - caleb_reg_write(CALEB_PORTEN, temp); -} - -void caleb_disable_rx(int port) -{ - u8 temp; - - temp = caleb_reg_read(CALEB_PORTEN); - temp &= ~(1 << port); - caleb_reg_write(CALEB_PORTEN, temp); -} - -void caleb_enable_tx(int port) -{ - u8 temp; - - temp = caleb_reg_read(CALEB_PORTEN); - temp |= 1 << (port + 4); - caleb_reg_write(CALEB_PORTEN, temp); -} - -void caleb_disable_tx(int port) -{ - u8 temp; - - temp = caleb_reg_read(CALEB_PORTEN); - temp &= ~(1 << (port + 4)); - caleb_reg_write(CALEB_PORTEN, temp); -} |