summaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/bonding/bonding.h2
-rw-r--r--drivers/net/ethernet/8390/ax88796.c2
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c2
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/t3_hw.c2
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000_ethtool.c2
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/eq.c2
-rw-r--r--drivers/net/ethernet/micrel/ksz884x.c2
-rw-r--r--drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h2
-rw-r--r--drivers/net/sungem_phy.c8
-rw-r--r--drivers/net/wimax/i2400m/debugfs.c1
-rw-r--r--drivers/net/wireless/ath/ath9k/pci.c8
-rw-r--r--drivers/net/wireless/atmel.c2
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2100.h2
-rw-r--r--drivers/net/wireless/iwlegacy/4965.h4
-rw-r--r--drivers/net/wireless/iwlegacy/common.c10
-rw-r--r--drivers/net/wireless/iwlegacy/common.h12
-rw-r--r--drivers/net/wireless/iwlwifi/pcie/trans.c8
-rw-r--r--drivers/net/wireless/zd1211rw/zd_chip.c2
18 files changed, 27 insertions, 46 deletions
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 6dded569b111..21b68e5c14fd 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -245,7 +245,7 @@ struct bonding {
struct delayed_work ad_work;
struct delayed_work mcast_work;
#ifdef CONFIG_DEBUG_FS
- /* debugging suport via debugfs */
+ /* debugging support via debugfs */
struct dentry *debug_dir;
#endif /* CONFIG_DEBUG_FS */
};
diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c
index 0338352bc036..70dba5d01ad3 100644
--- a/drivers/net/ethernet/8390/ax88796.c
+++ b/drivers/net/ethernet/8390/ax88796.c
@@ -109,7 +109,7 @@ static inline struct ax_device *to_ax_dev(struct net_device *dev)
/*
* ax_initial_check
*
- * do an initial probe for the card to check wether it exists
+ * do an initial probe for the card to check whether it exists
* and is functional
*/
static int ax_initial_check(struct net_device *dev)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index b8b4b749daab..09b625e0fdaa 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -4318,7 +4318,7 @@ static int bnx2x_queue_comp_cmd(struct bnx2x *bp,
if (o->next_tx_only >= o->max_cos)
/* >= becuase tx only must always be smaller than cos since the
- * primary connection suports COS 0
+ * primary connection supports COS 0
*/
BNX2X_ERR("illegal value for next tx_only: %d. max cos was %d",
o->next_tx_only, o->max_cos);
diff --git a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
index aef45d3113ba..3dee68612c9e 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
@@ -3307,7 +3307,7 @@ static void config_pcie(struct adapter *adap)
G_NUMFSTTRNSEQRX(t3_read_reg(adap, A_PCIE_MODE));
log2_width = fls(adap->params.pci.width) - 1;
acklat = ack_lat[log2_width][pldsize];
- if (val & 1) /* check LOsEnable */
+ if (val & PCI_EXP_LNKCTL_ASPM_L0S) /* check LOsEnable */
acklat += fst_trn_tx * 4;
rpllmt = rpl_tmr[log2_width][pldsize] + fst_trn_rx * 4;
diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
index 9089d00f1421..14e30515f6aa 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
@@ -1671,7 +1671,7 @@ static void e1000_get_wol(struct net_device *netdev,
/* apply any specific unsupported masks here */
switch (hw->device_id) {
case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
- /* KSP3 does not suppport UCAST wake-ups */
+ /* KSP3 does not support UCAST wake-ups */
wol->supported &= ~WAKE_UCAST;
if (adapter->wol & E1000_WUFC_EX)
diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c
index b84a88bc44dc..c48cf6f6529c 100644
--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -1267,7 +1267,7 @@ int mlx4_test_interrupts(struct mlx4_dev *dev)
/* Temporary use polling for command completions */
mlx4_cmd_use_polling(dev);
- /* Map the new eq to handle all asyncronous events */
+ /* Map the new eq to handle all asynchronous events */
err = mlx4_MAP_EQ(dev, get_async_ev_mask(dev), 0,
priv->eq_table.eq[i].eqn);
if (err) {
diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c
index 093d594435e1..83f0ea929d3d 100644
--- a/drivers/net/ethernet/micrel/ksz884x.c
+++ b/drivers/net/ethernet/micrel/ksz884x.c
@@ -6769,7 +6769,7 @@ static int stp;
/*
* This enables fast aging in the KSZ8842 switch. Not sure what situation
* needs that. However, fast aging is used to flush the dynamic MAC table when
- * STP suport is enabled.
+ * STP support is enabled.
*/
static int fast_aging;
diff --git a/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h
index 7ec4b864a550..75ec5e7cf50d 100644
--- a/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h
+++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h
@@ -27,7 +27,7 @@ struct mcp_gen_header {
*
* Fields below this comment are extensions added in later versions
* of this struct, drivers should compare the header_length against
- * offsetof(field) to check wether a given MCP implements them.
+ * offsetof(field) to check whether a given MCP implements them.
*
* Never remove any field. Keep everything naturally align.
*/
diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c
index 58f13adaa549..ae7cd7f3656d 100644
--- a/drivers/net/sungem_phy.c
+++ b/drivers/net/sungem_phy.c
@@ -608,7 +608,7 @@ static int bcm5421_poll_link(struct mii_phy* phy)
if ( mode == BCM54XX_COPPER)
return genmii_poll_link(phy);
- /* try to find out wether we have a link */
+ /* try to find out whether we have a link */
phy_write(phy, MII_NCONFIG, 0x2000);
phy_reg = phy_read(phy, MII_NCONFIG);
@@ -634,7 +634,7 @@ static int bcm5421_read_link(struct mii_phy* phy)
phy->speed = SPEED_1000;
- /* find out wether we are running half- or full duplex */
+ /* find out whether we are running half- or full duplex */
phy_write(phy, MII_NCONFIG, 0x2000);
phy_reg = phy_read(phy, MII_NCONFIG);
@@ -681,7 +681,7 @@ static int bcm5461_poll_link(struct mii_phy* phy)
if ( mode == BCM54XX_COPPER)
return genmii_poll_link(phy);
- /* find out wether we have a link */
+ /* find out whether we have a link */
phy_write(phy, MII_NCONFIG, 0x7000);
phy_reg = phy_read(phy, MII_NCONFIG);
@@ -710,7 +710,7 @@ static int bcm5461_read_link(struct mii_phy* phy)
phy->speed = SPEED_1000;
- /* find out wether we are running half- or full duplex */
+ /* find out whether we are running half- or full duplex */
phy_write(phy, MII_NCONFIG, 0x7000);
phy_reg = phy_read(phy, MII_NCONFIG);
diff --git a/drivers/net/wimax/i2400m/debugfs.c b/drivers/net/wimax/i2400m/debugfs.c
index 4b66ab1d0e5c..6702da838b0e 100644
--- a/drivers/net/wimax/i2400m/debugfs.c
+++ b/drivers/net/wimax/i2400m/debugfs.c
@@ -209,6 +209,7 @@ int debugfs_i2400m_reset_set(void *data, u64 val)
result = i2400m_reset(i2400m, rt);
if (result >= 0)
result = 0;
+ break;
default:
result = -EINVAL;
}
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 8e9b826f878b..7ae73fbd9136 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -114,23 +114,23 @@ static void ath_pci_aspm_init(struct ath_common *common)
if ((ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_NONE) &&
(AR_SREV_9285(ah))) {
- /* Bluetooth coexistance requires disabling ASPM. */
+ /* Bluetooth coexistence requires disabling ASPM. */
pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL,
- PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
+ PCI_EXP_LNKCTL_ASPM_L0S | PCI_EXP_LNKCTL_ASPM_L1);
/*
* Both upstream and downstream PCIe components should
* have the same ASPM settings.
*/
pcie_capability_clear_word(parent, PCI_EXP_LNKCTL,
- PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
+ PCI_EXP_LNKCTL_ASPM_L0S | PCI_EXP_LNKCTL_ASPM_L1);
ath_info(common, "Disabling ASPM since BTCOEX is enabled\n");
return;
}
pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &aspm);
- if (aspm & (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1)) {
+ if (aspm & (PCI_EXP_LNKCTL_ASPM_L0S | PCI_EXP_LNKCTL_ASPM_L1)) {
ah->aspm_enabled = true;
/* Initialize PCIe PM and SERDES registers. */
ath9k_hw_configpcipowersave(ah, false);
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 4a4e98f71807..4374079dfc2a 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -2963,7 +2963,7 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc)
ssid_el_p[1] = priv->SSID_size;
memcpy(ssid_el_p + 2, priv->SSID, priv->SSID_size);
ssid_el_p[2 + priv->SSID_size] = WLAN_EID_SUPP_RATES;
- ssid_el_p[3 + priv->SSID_size] = 4; /* len of suported rates */
+ ssid_el_p[3 + priv->SSID_size] = 4; /* len of supported rates */
memcpy(ssid_el_p + 4 + priv->SSID_size, atmel_basic_rates, 4);
atmel_transmit_management_frame(priv, &header, (void *)&body, bodysize);
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.h b/drivers/net/wireless/ipw2x00/ipw2100.h
index 973125242490..5fe17cbab1f3 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.h
+++ b/drivers/net/wireless/ipw2x00/ipw2100.h
@@ -1045,7 +1045,7 @@ typedef enum _ORDINAL_TABLE_1 { // NS - means Not Supported by FW
IPW_ORD_POWER_MGMT_MODE, // Power mode - 0=CAM, 1=PSP
IPW_ORD_POWER_MGMT_INDEX, //NS //
IPW_ORD_COUNTRY_CODE, // IEEE country code as recv'd from beacon
- IPW_ORD_COUNTRY_CHANNELS, // channels suported by country
+ IPW_ORD_COUNTRY_CHANNELS, // channels supported by country
// IPW_ORD_COUNTRY_CHANNELS:
// For 11b the lower 2-byte are used for channels from 1-14
// and the higher 2-byte are not used.
diff --git a/drivers/net/wireless/iwlegacy/4965.h b/drivers/net/wireless/iwlegacy/4965.h
index 2d092f328547..1b15b0b2292b 100644
--- a/drivers/net/wireless/iwlegacy/4965.h
+++ b/drivers/net/wireless/iwlegacy/4965.h
@@ -917,10 +917,6 @@ struct il4965_scd_bc_tbl {
/* PCI registers */
#define PCI_CFG_RETRY_TIMEOUT 0x041
-/* PCI register values */
-#define PCI_CFG_LINK_CTRL_VAL_L0S_EN 0x01
-#define PCI_CFG_LINK_CTRL_VAL_L1_EN 0x02
-
#define IL4965_DEFAULT_TX_RETRY 15
/* EEPROM */
diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c
index 318ed3c9fe74..7e16d10a7f14 100644
--- a/drivers/net/wireless/iwlegacy/common.c
+++ b/drivers/net/wireless/iwlegacy/common.c
@@ -1183,9 +1183,10 @@ EXPORT_SYMBOL(il_power_update_mode);
void
il_power_initialize(struct il_priv *il)
{
- u16 lctl = il_pcie_link_ctl(il);
+ u16 lctl;
- il->power_data.pci_pm = !(lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN);
+ pcie_capability_read_word(il->pci_dev, PCI_EXP_LNKCTL, &lctl);
+ il->power_data.pci_pm = !(lctl & PCI_EXP_LNKCTL_ASPM_L0S);
il->power_data.debug_sleep_level_override = -1;
@@ -4233,9 +4234,8 @@ il_apm_init(struct il_priv *il)
* power savings, even without L1.
*/
if (il->cfg->set_l0s) {
- lctl = il_pcie_link_ctl(il);
- if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) ==
- PCI_CFG_LINK_CTRL_VAL_L1_EN) {
+ pcie_capability_read_word(il->pci_dev, PCI_EXP_LNKCTL, &lctl);
+ if (lctl & PCI_EXP_LNKCTL_ASPM_L1) {
/* L1-ASPM enabled; disable(!) L0S */
il_set_bit(il, CSR_GIO_REG,
CSR_GIO_REG_VAL_L0S_ENABLED);
diff --git a/drivers/net/wireless/iwlegacy/common.h b/drivers/net/wireless/iwlegacy/common.h
index e254cba4557a..a9a569f432fb 100644
--- a/drivers/net/wireless/iwlegacy/common.h
+++ b/drivers/net/wireless/iwlegacy/common.h
@@ -1829,14 +1829,6 @@ int il_enqueue_hcmd(struct il_priv *il, struct il_host_cmd *cmd);
* PCI *
*****************************************************/
-static inline u16
-il_pcie_link_ctl(struct il_priv *il)
-{
- u16 pci_lnk_ctl;
- pcie_capability_read_word(il->pci_dev, PCI_EXP_LNKCTL, &pci_lnk_ctl);
- return pci_lnk_ctl;
-}
-
void il_bg_watchdog(unsigned long data);
u32 il_usecs_to_beacons(struct il_priv *il, u32 usec, u32 beacon_interval);
__le32 il_add_beacon_time(struct il_priv *il, u32 base, u32 addon,
@@ -2434,10 +2426,6 @@ struct il_tfd {
/* PCI registers */
#define PCI_CFG_RETRY_TIMEOUT 0x041
-/* PCI register values */
-#define PCI_CFG_LINK_CTRL_VAL_L0S_EN 0x01
-#define PCI_CFG_LINK_CTRL_VAL_L1_EN 0x02
-
struct il_rate_info {
u8 plcp; /* uCode API: RATE_6M_PLCP, etc. */
u8 plcp_siso; /* uCode API: RATE_SISO_6M_PLCP, etc. */
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index d66cad4a7d6a..35708b959ad6 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -94,8 +94,6 @@ static void iwl_pcie_set_pwr_vmain(struct iwl_trans *trans)
/* PCI registers */
#define PCI_CFG_RETRY_TIMEOUT 0x041
-#define PCI_CFG_LINK_CTRL_VAL_L0S_EN 0x01
-#define PCI_CFG_LINK_CTRL_VAL_L1_EN 0x02
static void iwl_pcie_apm_config(struct iwl_trans *trans)
{
@@ -111,9 +109,7 @@ static void iwl_pcie_apm_config(struct iwl_trans *trans)
* power savings, even without L1.
*/
pcie_capability_read_word(trans_pcie->pci_dev, PCI_EXP_LNKCTL, &lctl);
-
- if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) ==
- PCI_CFG_LINK_CTRL_VAL_L1_EN) {
+ if (lctl & PCI_EXP_LNKCTL_ASPM_L1) {
/* L1-ASPM enabled; disable(!) L0S */
iwl_set_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
dev_info(trans->dev, "L1 Enabled; Disabling L0S\n");
@@ -122,7 +118,7 @@ static void iwl_pcie_apm_config(struct iwl_trans *trans)
iwl_clear_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
dev_info(trans->dev, "L1 Disabled; Enabling L0S\n");
}
- trans->pm_support = !(lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN);
+ trans->pm_support = !(lctl & PCI_EXP_LNKCTL_ASPM_L0S);
}
/*
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index ff306d763e37..71ab320fae82 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -1155,7 +1155,7 @@ int zd_chip_init_hw(struct zd_chip *chip)
if (r)
goto out;
/* Currently we support IEEE 802.11g for full and high speed USB.
- * It might be discussed, whether we should suppport pure b mode for
+ * It might be discussed, whether we should support pure b mode for
* full speed USB.
*/
r = set_mandatory_rates(chip, 1);
View Lorry Controller Status