summaryrefslogtreecommitdiff
path: root/drivers/regulator
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/regulator')
-rw-r--r--drivers/regulator/arizona-ldo1.c2
-rw-r--r--drivers/regulator/axp20x-regulator.c12
-rw-r--r--drivers/regulator/core.c40
-rw-r--r--drivers/regulator/fixed.c46
-rw-r--r--drivers/regulator/gpio-regulator.c9
-rw-r--r--drivers/regulator/helpers.c6
-rw-r--r--drivers/regulator/lp873x-regulator.c1
-rw-r--r--drivers/regulator/max77620-regulator.c47
-rw-r--r--drivers/regulator/stw481x-vmmc.c3
-rw-r--r--drivers/regulator/tps6507x-regulator.c2
-rw-r--r--drivers/regulator/tps65086-regulator.c51
11 files changed, 183 insertions, 36 deletions
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index f7c88ff90c43..302b57cb89c6 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -130,6 +130,7 @@ static const struct regulator_desc arizona_ldo1_hc = {
.uV_step = 50000,
.n_voltages = 8,
.enable_time = 1500,
+ .ramp_delay = 24000,
.owner = THIS_MODULE,
};
@@ -153,6 +154,7 @@ static const struct regulator_desc arizona_ldo1 = {
.uV_step = 25000,
.n_voltages = 13,
.enable_time = 500,
+ .ramp_delay = 24000,
.owner = THIS_MODULE,
};
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 54382ef902c6..e6a512ebeae2 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -337,10 +337,18 @@ static const struct regulator_desc axp809_regulators[] = {
AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
AXP_DESC(AXP809, ELDO3, "eldo3", "eldoin", 700, 3300, 100,
AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
- AXP_DESC_IO(AXP809, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100,
+ /*
+ * Note the datasheet only guarantees reliable operation up to
+ * 3.3V, this needs to be enforced via dts provided constraints
+ */
+ AXP_DESC_IO(AXP809, LDO_IO0, "ldo_io0", "ips", 700, 3800, 100,
AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
- AXP_DESC_IO(AXP809, LDO_IO1, "ldo_io1", "ips", 700, 3300, 100,
+ /*
+ * Note the datasheet only guarantees reliable operation up to
+ * 3.3V, this needs to be enforced via dts provided constraints
+ */
+ AXP_DESC_IO(AXP809, LDO_IO1, "ldo_io1", "ips", 700, 3800, 100,
AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
AXP_DESC_FIXED(AXP809, RTC_LDO, "rtc_ldo", "ips", 1800),
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 67426c0477d3..04baac9a165b 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -204,7 +204,7 @@ static struct device_node *of_get_regulator(struct device *dev, const char *supp
regnode = of_parse_phandle(dev->of_node, prop_name, 0);
if (!regnode) {
- dev_dbg(dev, "Looking up %s property in node %s failed",
+ dev_dbg(dev, "Looking up %s property in node %s failed\n",
prop_name, dev->of_node->full_name);
return NULL;
}
@@ -293,7 +293,8 @@ static int regulator_check_current_limit(struct regulator_dev *rdev,
}
/* operating mode constraint check */
-static int regulator_mode_constrain(struct regulator_dev *rdev, int *mode)
+static int regulator_mode_constrain(struct regulator_dev *rdev,
+ unsigned int *mode)
{
switch (*mode) {
case REGULATOR_MODE_FAST:
@@ -2754,7 +2755,7 @@ static int _regulator_set_voltage_time(struct regulator_dev *rdev,
ramp_delay = rdev->desc->ramp_delay;
if (ramp_delay == 0) {
- rdev_warn(rdev, "ramp_delay not set\n");
+ rdev_dbg(rdev, "ramp_delay not set\n");
return 0;
}
@@ -3359,6 +3360,39 @@ unsigned int regulator_get_mode(struct regulator *regulator)
}
EXPORT_SYMBOL_GPL(regulator_get_mode);
+static int _regulator_get_error_flags(struct regulator_dev *rdev,
+ unsigned int *flags)
+{
+ int ret;
+
+ mutex_lock(&rdev->mutex);
+
+ /* sanity check */
+ if (!rdev->desc->ops->get_error_flags) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = rdev->desc->ops->get_error_flags(rdev, flags);
+out:
+ mutex_unlock(&rdev->mutex);
+ return ret;
+}
+
+/**
+ * regulator_get_error_flags - get regulator error information
+ * @regulator: regulator source
+ * @flags: pointer to store error flags
+ *
+ * Get the current regulator error information.
+ */
+int regulator_get_error_flags(struct regulator *regulator,
+ unsigned int *flags)
+{
+ return _regulator_get_error_flags(regulator->rdev, flags);
+}
+EXPORT_SYMBOL_GPL(regulator_get_error_flags);
+
/**
* regulator_set_load - set regulator load
* @regulator: regulator source
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index 988a7472c2ab..a43b0e8a438d 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -30,6 +30,9 @@
#include <linux/of_gpio.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/machine.h>
+#include <linux/acpi.h>
+#include <linux/property.h>
+#include <linux/gpio/consumer.h>
struct fixed_voltage_data {
struct regulator_desc desc;
@@ -94,6 +97,44 @@ of_get_fixed_voltage_config(struct device *dev,
return config;
}
+/**
+ * acpi_get_fixed_voltage_config - extract fixed_voltage_config structure info
+ * @dev: device requesting for fixed_voltage_config
+ * @desc: regulator description
+ *
+ * Populates fixed_voltage_config structure by extracting data through ACPI
+ * interface, returns a pointer to the populated structure of NULL if memory
+ * alloc fails.
+ */
+static struct fixed_voltage_config *
+acpi_get_fixed_voltage_config(struct device *dev,
+ const struct regulator_desc *desc)
+{
+ struct fixed_voltage_config *config;
+ const char *supply_name;
+ struct gpio_desc *gpiod;
+ int ret;
+
+ config = devm_kzalloc(dev, sizeof(*config), GFP_KERNEL);
+ if (!config)
+ return ERR_PTR(-ENOMEM);
+
+ ret = device_property_read_string(dev, "supply-name", &supply_name);
+ if (!ret)
+ config->supply_name = supply_name;
+
+ gpiod = gpiod_get(dev, "gpio", GPIOD_ASIS);
+ if (IS_ERR(gpiod))
+ return ERR_PTR(-ENODEV);
+
+ config->gpio = desc_to_gpio(gpiod);
+ config->enable_high = device_property_read_bool(dev,
+ "enable-active-high");
+ gpiod_put(gpiod);
+
+ return config;
+}
+
static struct regulator_ops fixed_voltage_ops = {
};
@@ -114,6 +155,11 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
&drvdata->desc);
if (IS_ERR(config))
return PTR_ERR(config);
+ } else if (ACPI_HANDLE(&pdev->dev)) {
+ config = acpi_get_fixed_voltage_config(&pdev->dev,
+ &drvdata->desc);
+ if (IS_ERR(config))
+ return PTR_ERR(config);
} else {
config = dev_get_platdata(&pdev->dev);
}
diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c
index 83e89e5d4752..0fce06acfaec 100644
--- a/drivers/regulator/gpio-regulator.c
+++ b/drivers/regulator/gpio-regulator.c
@@ -162,8 +162,8 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np,
of_property_read_u32(np, "startup-delay-us", &config->startup_delay);
config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0);
- if (config->enable_gpio == -EPROBE_DEFER)
- return ERR_PTR(-EPROBE_DEFER);
+ if (config->enable_gpio < 0 && config->enable_gpio != -ENOENT)
+ return ERR_PTR(config->enable_gpio);
/* Fetch GPIOs. - optional property*/
ret = of_gpio_count(np);
@@ -190,8 +190,11 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np,
for (i = 0; i < config->nr_gpios; i++) {
gpio = of_get_named_gpio(np, "gpios", i);
- if (gpio < 0)
+ if (gpio < 0) {
+ if (gpio != -ENOENT)
+ return ERR_PTR(gpio);
break;
+ }
config->gpios[i].gpio = gpio;
if (proplen > 0) {
of_property_read_u32_index(np, "gpios-states",
diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index bcf38fd5106a..379cdacc05d8 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -454,13 +454,17 @@ EXPORT_SYMBOL_GPL(regulator_set_bypass_regmap);
int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable)
{
unsigned int val;
+ unsigned int val_on = rdev->desc->bypass_val_on;
int ret;
ret = regmap_read(rdev->regmap, rdev->desc->bypass_reg, &val);
if (ret != 0)
return ret;
- *enable = (val & rdev->desc->bypass_mask) == rdev->desc->bypass_val_on;
+ if (!val_on)
+ val_on = rdev->desc->bypass_mask;
+
+ *enable = (val & rdev->desc->bypass_mask) == val_on;
return 0;
}
diff --git a/drivers/regulator/lp873x-regulator.c b/drivers/regulator/lp873x-regulator.c
index e504b9148226..70e3df653381 100644
--- a/drivers/regulator/lp873x-regulator.c
+++ b/drivers/regulator/lp873x-regulator.c
@@ -24,6 +24,7 @@
[_id] = { \
.desc = { \
.name = _name, \
+ .supply_name = _of "-in", \
.id = _id, \
.of_match = of_match_ptr(_of), \
.regulators_node = of_match_ptr("regulators"),\
diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c
index a1b49a6d538f..d088a7c79e60 100644
--- a/drivers/regulator/max77620-regulator.c
+++ b/drivers/regulator/max77620-regulator.c
@@ -73,7 +73,6 @@ struct max77620_regulator_info {
};
struct max77620_regulator_pdata {
- struct regulator_init_data *reg_idata;
int active_fps_src;
int active_fps_pd_slot;
int active_fps_pu_slot;
@@ -81,6 +80,7 @@ struct max77620_regulator_pdata {
int suspend_fps_pd_slot;
int suspend_fps_pu_slot;
int current_mode;
+ int power_ok;
int ramp_rate_setting;
};
@@ -351,11 +351,48 @@ static int max77620_set_slew_rate(struct max77620_regulator *pmic, int id,
return 0;
}
+static int max77620_config_power_ok(struct max77620_regulator *pmic, int id)
+{
+ struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id];
+ struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+ struct max77620_chip *chip = dev_get_drvdata(pmic->dev->parent);
+ u8 val, mask;
+ int ret;
+
+ switch (chip->chip_id) {
+ case MAX20024:
+ if (rpdata->power_ok >= 0) {
+ if (rinfo->type == MAX77620_REGULATOR_TYPE_SD)
+ mask = MAX20024_SD_CFG1_MPOK_MASK;
+ else
+ mask = MAX20024_LDO_CFG2_MPOK_MASK;
+
+ val = rpdata->power_ok ? mask : 0;
+
+ ret = regmap_update_bits(pmic->rmap, rinfo->cfg_addr,
+ mask, val);
+ if (ret < 0) {
+ dev_err(pmic->dev, "Reg 0x%02x update failed %d\n",
+ rinfo->cfg_addr, ret);
+ return ret;
+ }
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
static int max77620_init_pmic(struct max77620_regulator *pmic, int id)
{
struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id];
int ret;
+ max77620_config_power_ok(pmic, id);
+
/* Update power mode */
ret = max77620_regulator_get_power_mode(pmic, id);
if (ret < 0)
@@ -595,6 +632,12 @@ static int max77620_of_parse_cb(struct device_node *np,
np, "maxim,suspend-fps-power-down-slot", &pval);
rpdata->suspend_fps_pd_slot = (!ret) ? pval : -1;
+ ret = of_property_read_u32(np, "maxim,power-ok-control", &pval);
+ if (!ret)
+ rpdata->power_ok = pval;
+ else
+ rpdata->power_ok = -1;
+
ret = of_property_read_u32(np, "maxim,ramp-rate-setting", &pval);
rpdata->ramp_rate_setting = (!ret) ? pval : 0;
@@ -807,6 +850,8 @@ static int max77620_regulator_resume(struct device *dev)
for (id = 0; id < MAX77620_NUM_REGS; id++) {
reg_pdata = &pmic->reg_pdata[id];
+ max77620_config_power_ok(pmic, id);
+
max77620_regulator_set_fps_slots(pmic, id, false);
if (reg_pdata->active_fps_src < 0)
continue;
diff --git a/drivers/regulator/stw481x-vmmc.c b/drivers/regulator/stw481x-vmmc.c
index 7d2ae3e9e942..342f5da79975 100644
--- a/drivers/regulator/stw481x-vmmc.c
+++ b/drivers/regulator/stw481x-vmmc.c
@@ -47,7 +47,8 @@ static struct regulator_desc vmmc_regulator = {
.volt_table = stw481x_vmmc_voltages,
.enable_time = 200, /* FIXME: look this up */
.enable_reg = STW_CONF1,
- .enable_mask = STW_CONF1_PDN_VMMC,
+ .enable_mask = STW_CONF1_PDN_VMMC | STW_CONF1_MMC_LS_STATUS,
+ .enable_val = STW_CONF1_PDN_VMMC,
.vsel_reg = STW_CONF1,
.vsel_mask = STW_CONF1_VMMC_MASK,
};
diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c
index dad0bac09ecf..c179a3a221af 100644
--- a/drivers/regulator/tps6507x-regulator.c
+++ b/drivers/regulator/tps6507x-regulator.c
@@ -375,7 +375,7 @@ static struct tps6507x_board *tps6507x_parse_dt_reg_data(
struct device_node *np = pdev->dev.parent->of_node;
struct device_node *regulators;
struct of_regulator_match *matches;
- static struct regulator_init_data *reg_data;
+ struct regulator_init_data *reg_data;
int idx = 0, count, ret;
tps_board = devm_kzalloc(&pdev->dev, sizeof(*tps_board),
diff --git a/drivers/regulator/tps65086-regulator.c b/drivers/regulator/tps65086-regulator.c
index 33f389d583ef..ecb0371780af 100644
--- a/drivers/regulator/tps65086-regulator.c
+++ b/drivers/regulator/tps65086-regulator.c
@@ -71,7 +71,7 @@ struct tps65086_regulator {
unsigned int decay_mask;
};
-static const struct regulator_linear_range tps65086_buck126_10mv_ranges[] = {
+static const struct regulator_linear_range tps65086_10mv_ranges[] = {
REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
REGULATOR_LINEAR_RANGE(410000, 0x1, 0x7F, 10000),
};
@@ -82,7 +82,7 @@ static const struct regulator_linear_range tps65086_buck126_25mv_ranges[] = {
REGULATOR_LINEAR_RANGE(1025000, 0x19, 0x7F, 25000),
};
-static const struct regulator_linear_range tps65086_buck345_ranges[] = {
+static const struct regulator_linear_range tps65086_buck345_25mv_ranges[] = {
REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0),
REGULATOR_LINEAR_RANGE(425000, 0x1, 0x7F, 25000),
};
@@ -125,27 +125,27 @@ static int tps65086_of_parse_cb(struct device_node *dev,
static struct tps65086_regulator regulators[] = {
TPS65086_REGULATOR("BUCK1", "buck1", BUCK1, 0x80, TPS65086_BUCK1CTRL,
BUCK_VID_MASK, TPS65086_BUCK123CTRL, BIT(0),
- tps65086_buck126_10mv_ranges, TPS65086_BUCK1CTRL,
+ tps65086_10mv_ranges, TPS65086_BUCK1CTRL,
BIT(0)),
TPS65086_REGULATOR("BUCK2", "buck2", BUCK2, 0x80, TPS65086_BUCK2CTRL,
BUCK_VID_MASK, TPS65086_BUCK123CTRL, BIT(1),
- tps65086_buck126_10mv_ranges, TPS65086_BUCK2CTRL,
+ tps65086_10mv_ranges, TPS65086_BUCK2CTRL,
BIT(0)),
TPS65086_REGULATOR("BUCK3", "buck3", BUCK3, 0x80, TPS65086_BUCK3VID,
BUCK_VID_MASK, TPS65086_BUCK123CTRL, BIT(2),
- tps65086_buck345_ranges, TPS65086_BUCK3DECAY,
+ tps65086_10mv_ranges, TPS65086_BUCK3DECAY,
BIT(0)),
TPS65086_REGULATOR("BUCK4", "buck4", BUCK4, 0x80, TPS65086_BUCK4VID,
BUCK_VID_MASK, TPS65086_BUCK4CTRL, BIT(0),
- tps65086_buck345_ranges, TPS65086_BUCK4VID,
+ tps65086_10mv_ranges, TPS65086_BUCK4VID,
BIT(0)),
TPS65086_REGULATOR("BUCK5", "buck5", BUCK5, 0x80, TPS65086_BUCK5VID,
BUCK_VID_MASK, TPS65086_BUCK5CTRL, BIT(0),
- tps65086_buck345_ranges, TPS65086_BUCK5CTRL,
+ tps65086_10mv_ranges, TPS65086_BUCK5CTRL,
BIT(0)),
TPS65086_REGULATOR("BUCK6", "buck6", BUCK6, 0x80, TPS65086_BUCK6VID,
BUCK_VID_MASK, TPS65086_BUCK6CTRL, BIT(0),
- tps65086_buck126_10mv_ranges, TPS65086_BUCK6CTRL,
+ tps65086_10mv_ranges, TPS65086_BUCK6CTRL,
BIT(0)),
TPS65086_REGULATOR("LDOA1", "ldoa1", LDOA1, 0xF, TPS65086_LDOA1CTRL,
VDOA1_VID_MASK, TPS65086_LDOA1CTRL, BIT(0),
@@ -162,18 +162,6 @@ static struct tps65086_regulator regulators[] = {
TPS65086_SWITCH("VTT", "vtt", VTT, TPS65086_SWVTT_EN, BIT(4)),
};
-static inline bool has_25mv_mode(int id)
-{
- switch (id) {
- case BUCK1:
- case BUCK2:
- case BUCK6:
- return true;
- default:
- return false;
- }
-}
-
static int tps65086_of_parse_cb(struct device_node *dev,
const struct regulator_desc *desc,
struct regulator_config *config)
@@ -181,12 +169,27 @@ static int tps65086_of_parse_cb(struct device_node *dev,
int ret;
/* Check for 25mV step mode */
- if (has_25mv_mode(desc->id) &&
- of_property_read_bool(config->of_node, "ti,regulator-step-size-25mv")) {
- regulators[desc->id].desc.linear_ranges =
+ if (of_property_read_bool(config->of_node, "ti,regulator-step-size-25mv")) {
+ switch (desc->id) {
+ case BUCK1:
+ case BUCK2:
+ case BUCK6:
+ regulators[desc->id].desc.linear_ranges =
tps65086_buck126_25mv_ranges;
- regulators[desc->id].desc.n_linear_ranges =
+ regulators[desc->id].desc.n_linear_ranges =
ARRAY_SIZE(tps65086_buck126_25mv_ranges);
+ break;
+ case BUCK3:
+ case BUCK4:
+ case BUCK5:
+ regulators[desc->id].desc.linear_ranges =
+ tps65086_buck345_25mv_ranges;
+ regulators[desc->id].desc.n_linear_ranges =
+ ARRAY_SIZE(tps65086_buck345_25mv_ranges);
+ break;
+ default:
+ dev_warn(config->dev, "25mV step mode only valid for BUCK regulators\n");
+ }
}
/* Check for decay mode */
View Lorry Controller Status