summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* jffs2: update to new MTD interfaceBrian Norris2012-03-271-3/+1
| | | | | | | | | | | | | | | | | | | | | | There were a few instances of the old MTD interface remaining for JFFS2. We fix one error that shows up (only when CONFIG_JFFS2_FS_WRITEBUFFER is not defined) like this: fs/jffs2/read.c: In function 'jffs2_read_dnode': fs/jffs2/read.c:36:8: error: 'struct mtd_info' has no member named 'read' fs/jffs2/read.c:112:8: error: 'struct mtd_info' has no member named 'read' ... We also simply remove two macros that are not in use, were not updated to the new MTD interface, and don't even utilize the old interface properly. (That means they weren't used since commit 8593fbc6, year 2006; almost 6 years ago, for those who don't want to do the math) Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* romfs: switch to new MTD APIArtem Bityutskiy2012-03-271-1/+1
| | | | | | | | We have changed the MTD API and now ROMFS should use 'mtd_read()' instead of mtd->read(). Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* jffs2: remove direct mtd->point referenceArtem Bityutskiy2012-03-271-11/+9
| | | | | | | | Commit 10934478e44d9a5a7b16dadd89094fb608cf101e did not remove now useless "if (mtd->point)" check mistakingly - let's kill it now. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: add support for diskonchip G4 nand flash deviceMike Dunn2012-03-273-0/+1399
| | | | | | | | | | | | | | | | | | This patch adds a driver for the M-Sys / Sandisk diskonchip G4 nand flash found in various smartphones and PDAs, among them the Palm Treo680, HTC Prophet and Wizard, Toshiba Portege G900, Asus P526, and O2 XDA Zinc. It was tested on the Treo 680, but should work generically. Since v3, this patch adds power management functions, a scan of the factory bad block table during initialization, several fixes, and more extensive testing. Also, the platform data header file, which only contained partitioning information, was removed. Command-line partitioning can be used, at least until an mtd parser is written for the saftl format with which these chips are shipped. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: minor coding style cleanup in mtdpart.cStefan Roese2012-03-271-1/+1
| | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: convert drivers/mtd/* to use module_spi_driver()Axel Lin2012-03-273-39/+3
| | | | | | | | | This patch converts the drivers in drivers/mtd/* to use the module_spi_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: move SCANLASTPAGE handling to the correct code blockBrian Norris2012-03-271-6/+7
| | | | | | | | | | | | | | | | | | | | As nand_default_block_markbad() is becoming more complex, it helps to have code appear only in its relevant codepath(s). Here, the calculation of `ofs' based on NAND_BBT_SCANLASTPAGE is only useful on paths where we write bad block markers to OOB. We move the condition/calculation closer to the `write' operation and update the comment to more correctly describe the operation. The variable `wr_ofs' is also used to help isolate our calculation of the "write" offset from the usage of `ofs' to represent the eraseblock offset. This will become useful when we reorder operations in the next patch. This patch should make no functional change. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mtdoops: kill Kconfig usage instructionsBrian Norris2012-03-271-3/+0
| | | | | | | | | | | | | | | | | | | | The mtdoops usage instructions found in Kconfig have been incorrect since: commit 2e386e4bac90554887e73d6f342e845185b33fc3 mtd: mtdoops: refactor as a kmsg_dumper mtdoops no longer uses a console. Now, if you build it into your kernel, you add something like the following to your command line to select partition X as your logging partition: mtdoops.mtddev=X Anyway, it seems better to leave the documentation out of Kconfig. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: sa11x0: remove definitions and code left for documentation purposesRussell King - ARM Linux2012-03-271-100/+0
| | | | | | | | | | | | | /* * This is here for documentation purposes only - until these people * submit their machine types. It will be gone January 2005. */ It's now seven years after that date, so let's remove this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: sa11x0: Remove shutdown handlerRussell King - ARM Linux2012-03-271-12/+0
| | | | | | | | | | | | | | | Commit c4a9f88daf ([MTD] [NOR] fix ctrl-alt-del can't reboot for intel flash bug) interferes with this work-around, causing MTD to issue this warning: Flash device refused suspend due to active operation (state 0) The commit makes our work-around in the map driver unnecessary, so let's remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: spear_smi: release memory region during removeShiraz Hashim2012-03-271-0/+4
| | | | | | | | | | Driver must cleanup all held resources during remove. It wasn't releasing requested memory region. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: ST SPEAr: Add SMI driver for serial NOR flashShiraz Hashim2012-03-274-0/+1180
| | | | | | | | | | | | | | | | SPEAr platforms (spear3xx/spear6xx/spear13xx) provide SMI (Serial Memory Interface) controller to access serial NOR flash. SMI provides a simple interface for SPI/serial NOR flashes and has certain inbuilt commands and features to support these flashes easily. It also makes it possible to map an address range in order to directly access (read/write) the SNOR over address bus. This patch intends to provide serial nor driver support for spear platforms which are accessed through SMI. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: correct comment on nand_chip badblockbitsBrian Norris2012-03-271-2/+3
| | | | | | | | | The description for badblockbits is incorrect. I think someone just made up a false description on the spot to satisfy some kerneldoc warning. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: differentiate 1- vs. 2-byte writes when marking bad blocksBrian Norris2012-03-271-4/+8
| | | | | | | | | | | | | | | It seems that we have developed a bad-block-marking "feature" out of pure laziness: "We write two bytes per location, so we dont have to mess with 16 bit access." It's relatively simple to write a 1 byte at a time on x8 devices and 2 bytes at a time on x16 devices, so let's do it. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: fix SCAN2NDPAGE check for BBMBrian Norris2012-03-271-17/+23
| | | | | | | | | | nand_block_bad() doesn't check the correct pages when NAND_BBT_SCAN2NDPAGE is enabled. It should scan both the OOB region of both the 1st and 2nd page of each block. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: erase block before marking badBrian Norris2012-03-271-0/+11
| | | | | | | | | | | | | | | Many NAND flash systems (especially those with MLC NAND) cannot be reliably written twice in a row. For instance, when marking a bad block, the block may already have data written to it, and so we should attempt to erase the block before writing a bad block marker to its OOB region. We can ignore erase failures, since the block may be bad such that it cannot be erased properly; we still attempt to write zeros to its spare area. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: onenand: samsung: add missing iounmapJulia Lawall2012-03-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add missing iounmap in error handling code, in a case where the function already preforms iounmap on some other execution path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; statement S,S1; int ret; @@ e = \(ioremap\|ioremap_nocache\)(...) ... when != iounmap(e) if (<+...e...+>) S ... when any when != iounmap(e) *if (...) { ... when != iounmap(e) return ...; } ... when any iounmap(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mtdcore: Fix build warning when CONFIG_MTD_CHAR is not definedFabio Estevam2012-03-271-1/+1
| | | | | | | | | | | | | Fix the following build warning: drivers/mtd/mtdcore.c: In function ‘mtd_release’: drivers/mtd/mtdcore.c:110: warning: unused variable ‘mtd’ This happens when neither CONFIG_MTD_CHAR nor CONFIG_MTD_CHAR_MODULE are defined. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: mtdblock: call mtd_sync() only if opened for writeAlexander Stein2012-03-273-2/+8
| | | | | | | | | | | | | | Because it is useless to call it if the device is opened in R/O mode, and also harmful: on CFI NOR flash it may block for long time waiting for erase operations to complete is another partition with a R/W file-system on this chip. Artem Bityutskiy: write commit message, amend the patch to match the latest tree (we use mtd_sync(), not mtd->sync() nowadays). Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: pmc551: fix signedness bug in init_pmc551()Xi Wang2012-03-271-2/+2
| | | | | | | | | | | | | | Since "length" is a u32, the error handling below didn't work when fixup_pmc551() returns -ENODEV. if ((length = fixup_pmc551(PCI_Device)) <= 0) This patch changes both the type of "length" and the return type of fixup_pmc551() to int. Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: cfi: AMD/Fujitsu compatibles: add panic write supportIra W. Snyder2012-03-271-0/+240
| | | | | | | | | | | | | This allows the mtdoops driver to work on flash chips using the AMD/Fujitsu compatible command set. As the code comments note, the locks used throughout the normal code paths in the driver are ignored, so that the chance of writing out the kernel's last messages are maximized. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* Linux 3.3-rc6v3.3-rc6Linus Torvalds2012-03-031-1/+1
|
* Merge tag 'scsi-fixes' of ↵Linus Torvalds2012-03-031-2/+2
|\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 SCSI fixes from James Bottomley: "There's just a single fix in here: the osd max device number fix." * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] osd_uld: Bump MAX_OSD_DEVICES from 64 to 1,048,576
| * [SCSI] osd_uld: Bump MAX_OSD_DEVICES from 64 to 1,048,576Boaz Harrosh2012-02-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It used to be that minors where 8 bit. But now they are actually 20 bit. So the fix is simplicity itself. I've tested with 300 devices and all user-mode utils work just fine. I have also mechanically added 10,000 to the ida (so devices are /dev/osd10000, /dev/osd10001 ...) and was able to mkfs an exofs filesystem and access osds from user-mode. All the open-osd user-mode code uses the same library to access devices through their symbolic names in /dev/osdX so I'd say it's pretty safe. (Well tested) This patch is very important because some of the systems that will be deploying the 3.2 pnfs-objects code are larger than 64 OSDs and will stop to work properly when reaching that number. CC: Stable <stable@vger.kernel.org> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | Merge tag 'parisc-fixes' of ↵Linus Torvalds2012-03-034-2/+8
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6 PARISC fixes from James Bottomley: "This is a set of build fixes to get the cross compiled architecture testbeds building again" * tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] don't unconditionally override CROSS_COMPILE for 64 bit. [PARISC] include <linux/prefetch.h> in drivers/parisc/iommu-helpers.h [PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional
| * | [PARISC] don't unconditionally override CROSS_COMPILE for 64 bit.James Bottomley2012-02-281-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | The user may wish to set their own value (for real cross compiles). Since the top level Makefile initialises CROSS_COMPILE to empty by default, we must check it for being empty (rather than for being defined) before we override. Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | [PARISC] include <linux/prefetch.h> in drivers/parisc/iommu-helpers.hCong Wang2012-02-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/parisc/iommu-helpers.h:62: error: implicit declaration of function 'prefetchw' make[3]: *** [drivers/parisc/sba_iommu.o] Error 1 drivers/parisc/iommu-helpers.h needs to #include <linux/prefetch.h> where prefetchw is declared. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | [PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping ↵James Bottomley2012-02-272-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | functions conditional The problem in commit fea80311a939a746533a6d7e7c3183729d6a3faf Author: Randy Dunlap <rdunlap@xenotime.net> Date: Sun Jul 24 11:39:14 2011 -0700 iomap: make IOPORT/PCI mapping functions conditional is that if your architecture supplies pci_iomap/pci_iounmap, it expects always to supply them. Adding empty body defitions in the !CONFIG_PCI case, which is what this patch does, breaks the parisc compile because the functions become doubly defined. It took us a while to spot this, because we don't actually build !CONFIG_PCI very often (only if someone is brave enough to test the snake/asp machines). Since the note in the commit log says this is to fix a CONFIG_GENERIC_IOMAP issue (which it does because CONFIG_GENERIC_IOMAP supplies pci_iounmap only if CONFIG_PCI is set), there should actually have been a condition upon this. This should make sure no other architecture's !CONFIG_PCI compile breaks in the same way as parisc. The fix had to be updated to take account of the GENERIC_PCI_IOMAP separation. Reported-by: Rolf Eike Beer <eike@sf-mail.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | | Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2012-03-034-4/+54
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled
| * | | perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabledJoerg Roedel2012-03-024-4/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It turned out that a performance counter on AMD does not count at all when the GO or HO bit is set in the control register and SVM is disabled in EFER. This patch works around this issue by masking out the HO bit in the performance counter control register when SVM is not enabled. The GO bit is not touched because it is only set when the user wants to count in guest-mode only. So when SVM is disabled the counter should not run at all and the not-counting is the intended behaviour. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Avi Kivity <avi@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Robert Richter <robert.richter@amd.com> Cc: stable@vger.kernel.org # v3.2 Link: http://lkml.kernel.org/r/1330523852-19566-1-git-send-email-joerg.roedel@amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds2012-03-031-0/+1
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull from Herbert Xu: "This push fixes a bug in mv_cesa that causes all hash operations that supply data on a final operation to fail." * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: mv_cesa - fix final callback not ignoring input data
| * | | | crypto: mv_cesa - fix final callback not ignoring input dataPhil Sutter2012-02-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Broken by commit 6ef84509f3d439ed2d43ea40080643efec37f54f for users passing a request with non-zero 'nbytes' field, like e.g. testmgr. Cc: <stable@kernel.org> # 3.0+ Signed-off-by: Phil Sutter <phil.sutter@viprinet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | | | | vfs: export full_name_hash() function to modulesLinus Torvalds2012-03-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 5707c87f "vfs: uninline full_name_hash()" broke the modular build, because it needs exporting now that it isn't inlined any more. Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | Merge tag 'hwmon-for-linus' of ↵Linus Torvalds2012-03-021-14/+75
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging hhwmon fixes for 3.3-rc6 from Guenter Roeck: These patches are necessary for correct operation and management of F75387. * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (f75375s) Catch some attempts to write to r/o registers hwmon: (f75375s) Properly map the F75387 automatic modes to pwm_enable hwmon: (f75375s) Make pwm*_mode writable for the F75387 hwmon: (f75375s) Fix writes to the pwm* attribute for the F75387
| * | | | | hwmon: (f75375s) Catch some attempts to write to r/o registersNikolaus Schulz2012-03-021-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It makes no sense to attempt to manually configure the fan in auto mode, or set the duty cycle directly in closed loop mode. The corresponding registers are then read-only. If the user tries it nonetheless, error out with EINVAL instead of silently doing nothing. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> [guenter.roeck@ericsson.com: Minor formatting cleanup] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
| * | | | | hwmon: (f75375s) Properly map the F75387 automatic modes to pwm_enableNikolaus Schulz2012-03-021-8/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The F75387 supports automatic fan control using either PWM duty cycle or RPM speed values. Make the driver detect the latter mode, and expose the different modes in sysfs as per pwm_enable, so that the user can switch between them. The interpretation of the pwm_enable attribute for the F75387 is adjusted to be a superset of those values used for similar Fintek chips which do not support automatic duty mode, with 2 mapping to automatic speed mode, and moving automatic duty mode to the new value 4. Toggling the duty mode via pwm_enable is currently denied for the F75387, as the chip then simply reinterprets the fan configuration register values according to the new mode, switching between RPM and PWM units, which makes this a dangerous operation. This patch introduces a new pwm mode into the driver. This is necessary because the new mode (automatic pwm mode, 4) may already be enabled by the BIOS, and the driver should not break existing functionality. This was seen on at least one board. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
| * | | | | hwmon: (f75375s) Make pwm*_mode writable for the F75387Nikolaus Schulz2012-02-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Nikolaus Schulz <mail@microschulz.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
| * | | | | hwmon: (f75375s) Fix writes to the pwm* attribute for the F75387Nikolaus Schulz2012-02-281-5/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the F75387, the register holding the current PWM duty cycle value is r/o; changing it requires writing to the fan expect register instead. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> [guenter.roeck@ericsson.com: Simplified function parameters] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
* | | | | | Merge tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6Linus Torvalds2012-03-025-10/+35
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fbdev fixes for 3.3 from Florian Tobias Schandinat It includes: - two fixes for OMAP HDMI - one fix to make new OMAP functions behave as they are supposed to - one Kconfig dependency fix - two fixes for viafb for modesetting on VX900 hardware * tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6: OMAPDSS: APPLY: make ovl_enable/disable synchronous OMAPDSS: panel-dvi: Add Kconfig dependency on I2C viafb: fix IGA1 modesetting on VX900 viafb: select HW scaling on VX900 for IGA2 OMAPDSS: HDMI: hot plug detect fix OMAPDSS: HACK: Ensure DSS clock domain gets out of idle when HDMI is enabled
| * | | | | | OMAPDSS: APPLY: make ovl_enable/disable synchronousTomi Valkeinen2012-02-291-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ovl->enable/disable are meant to be synchronous so that they can handle the configuration of fifo sizes. The current kernel doesn't configure fifo sizes yet, and so the code doesn't need to block to function (from omapdss driver's perspective). However, for the users of omapdss a non-blocking ovl->disable is confusing, because they don't know when the memory area is not used any more. Furthermore, when the fifo size configuration is added in the next merge window, the change from non-blocking to blocking could cause side effects to the users of omapdss. So by making the functions block already will keep them behaving in the same manner. And, while not the main purpose of this patch, this will also remove the compile warning: drivers/video/omap2/dss/apply.c:350: warning: 'wait_pending_extra_info_updates' defined but not used Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
| * | | | | | OMAPDSS: panel-dvi: Add Kconfig dependency on I2CTomi Valkeinen2012-02-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | panel-dvi uses i2c, but the Kconfig didn't have dependency on I2C. Add it. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
| * | | | | | viafb: fix IGA1 modesetting on VX900Florian Tobias Schandinat2012-02-241-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even if the documentation calls this bit "Reserved" it has to be set to 0 for correct modesetting on IGA1. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: stable@vger.kernel.org
| * | | | | | viafb: select HW scaling on VX900 for IGA2Florian Tobias Schandinat2012-02-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | VX900 can do hardware scaling for both IGAs in contrast to previous hardware which could do it only for IGA2. This patch ensures that we set the parameter for IGA2 and not for IGA1. This fixes hardware scaling on VX900 until we have the infrastructure to support it for both IGAs. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: stable@vger.kernel.org
| * | | | | | Merge branch 'for-3.3-rc' of git://gitorious.org/linux-omap-dss2/linux into ↵Florian Tobias Schandinat2012-02-242-9/+24
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | fbdev-for-linus
| | * | | | | | OMAPDSS: HDMI: hot plug detect fixRob Clark2012-02-231-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "OMAPDSS: HDMI: PHY burnout fix" commit switched the HDMI driver over to using a GPIO for plug detect. Unfortunately the ->detect() method was not also updated, causing HDMI to no longer work for the omapdrm driver (because it would actually check if a connection was detected before attempting to enable display). Signed-off-by: Rob Clark <rob@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| | * | | | | | OMAPDSS: HACK: Ensure DSS clock domain gets out of idle when HDMI is enabledArchit Taneja2012-02-231-1/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For DSS clock domain to transition from idle to active state. It's necessary to enable the optional clock DSS_FCLK before we enable the module using the MODULEMODE bits in the clock domain's CM_DSS_DSS_CLKCTRL register. This sequence was not followed correctly for the 'dss_hdmi' hwmod and it led to DSS clock domain not getting out of idle when pm_runtime_get_sync() was called for hdmi's platform device. Since the clock domain failed to change it's state to active, the hwmod code disables any clocks it had enabled before for this hwmod. This led to the clock 'dss_48mhz_clk' gettind disabled. When hdmi's runtime_resume() op is called, the call to dss_runtime_get() correctly enables the DSS clock domain this time. However, the clock 'dss_48mhz_clk' is needed for HDMI's PHY to function correctly. Since it was disabled previously, the driver fails when it tries to enable HDMI's PHY. Fix this for now by ensuring that dss_runtime_get() is called before we call pm_runtime_get_sync() for hdmi's platform device. A correct fix for later would be to modify the DSS related hwmod's mainclks, and also some changes in how opt clocks are handled in the DSS driver. This fixes the issue of HDMI not working when it's the default display. The issue is not seen if any other display is already enabled as the first display would have correctly enabled the DSS clockdomain. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* | | | | | | | Merge tag 'sound-fixes' of ↵Linus Torvalds2012-03-029-19/+51
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound sound fixes for 3.3-rc6 from Takashi Iwai This contains again regression fixes for various HD-audio and ASoC regarding SSI and dapm shutdown path. In addition, a minor azt3328 fix and the correction of the new jack-notification strings in HD-audio. * tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Kill hyphenated names ALSA: hda - Add a fake mute feature ALSA: hda - Always set HP pin in unsol handler for STAC/IDT codecs ALSA: azt3328 - Fix NULL ptr dereference on cards without OPL3 ALSA: hda/realtek - Fix resume of multiple input sources ASoC: i.MX SSI: Fix DSP_A format. ASoC: dapm: Check for bias level when powering down
| * | | | | | | | ALSA: hda - Kill hyphenated namesTakashi Iwai2012-03-024-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kill hyphens from "Line-Out" name strings, as suggested by Mark Brown. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | | | | Merge tag 'asoc-3.3' of ↵Takashi Iwai2012-03-012-4/+10
| |\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus A small fix for the SSI driver and a fix for system shutdown with modern devices. Most of the modern devices will never get shut down normally with a visible kernel log as the systems they're in tend not to shut down often and when they do it's usually in form factors that don't have a user visible console.
| | * | | | | | | | ASoC: i.MX SSI: Fix DSP_A format.Javier Martin2012-02-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to i.MX27 Reference Manual (p 1593) TXBIT0 bit selects whether the most significant or the less significant part of the data word written to the FIFO is transmitted. As DSP_A is the same as DSP_B with a data offset of 1 bit, it doesn't make any sense to remove TXBIT0 bit here. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
View Lorry Controller Status