summaryrefslogtreecommitdiff
path: root/arch/arm/boot
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi filesUwe Kleine-König2020-07-1368-53/+116
| | | | | | | | | | | | | The imx-pwm driver supports 3 cells and this is the more flexible setting. So use it by default and overwrite it back to two for the files that reference the PWMs with just 2 cells to minimize changes. This allows to drop explicit setting to 3 cells for the boards that already depend on this. The boards that are now using 2 cells explicitly can be converted to 3 individually. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: vf610-zii-scu4-aib: Configure fibre ports to 1000BaseXAndrew Lunn2020-07-131-10/+10
| | | | | | | | | | The SFF soldered onto the board expect the ports to use 1000BaseX. It makes no sense to have the ports set to SGMII, since they don't even support that mode. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: vf610-zii-dev-rev-c: Configure fiber port to 1000BaseXChris Healy2020-07-131-1/+1
| | | | | | | | | | The SFF soldered onto the board expects the port to use 1000BaseX. It makes no sense to have the port set to SGMII, since it doesn't even support that mode. Signed-off-by: Chris Healy <cphealy@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: ZII: update MDIO speed and preambleChris Healy2020-07-136-0/+12
| | | | | | | | | | Update MDIO configuration with ZII devices to fully utilize MDIO endpoint capabilities. All devices support 12.5MHz clock and don't require MDIO preable. Signed-off-by: Chris Healy <cphealy@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: vfxxx: Add node for CAAMAndrey Smirnov2020-07-131-0/+22
| | | | | | | | | Add node for CAAM device in NXP Vybrid SoC. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Chris Healy <cphealy@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6qp-sabresd: enable sataRichard Zhu2020-07-131-0/+4
| | | | | | | | Enable SATA on iMX6QP SABRESD board. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6qp-sabreauto: enable sataRichard Zhu2020-07-131-0/+4
| | | | | | | | Enable SATA on iMX6QP SABREAUTO board. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: add Protonic RVT boardOleksij Rempel2020-07-132-0/+185
| | | | | | | | | | | Protonic RVT is an internal development platform for a wireless ISObus Virtual Terminal based on COTS tablets, and the predecessor of the WD2 platform. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: add Protonic VT7 boardOleksij Rempel2020-07-132-0/+412
| | | | | | | | | | | The Protonic VT7 is a mid-class ISObus Virtual Terminal with a 7 inch touchscreen display. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: add Protonic WD2 boardOleksij Rempel2020-07-132-0/+189
| | | | | | | | | | | | Add support for the Protonic WD2 board, which is an internal development platform for low-cost agricultural Virtual Terminals based on COTS tablets and web applications. It inherits from the PRTI6Q base class. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: add Protonic PRTI6Q boardOleksij Rempel2020-07-133-0/+707
| | | | | | | | | | | Protonic PRTI6Q is a development board and a base class for different specific customer application boards based on the i.MX6 family of SoCs, developed by Protonic Holland. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6ul: Add ASRC device nodeShengjiu Wang2020-07-131-0/+25
| | | | | | | Add ASRC device node. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski2020-07-135-5/+5
| | | | | | | | | Fix dtschema validator warnings like: l2-cache@a02000: $nodename:0: 'l2-cache@a02000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: vf610: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski2020-07-131-1/+1
| | | | | | | | | | Fix dtschema validator warnings like: l2-cache@40006000: $nodename:0: 'l2-cache@40006000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6sx-sdb: Add MQS supportShengjiu Wang2020-07-134-0/+62
| | | | | | | | Add MQS support. As the pin conflict with usdhc2, then need to add a separate dts. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: ls1021a: add ftm_alarm0 DT nodeBiwen Li2020-07-131-0/+15
| | | | | | | | | | The patch add ftm_alarm0 DT node - add rcpm node - add ftm_alarm0 node - aliases ftm_alarm0 as rtc1 Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6sx-sabreauto: Add cs42888 sound card supportShengjiu Wang2020-07-132-0/+79
| | | | | | | Complete the ESAI node and Add cs42888 sound card support. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6sx-sabreauto: Add SPDIF supportShengjiu Wang2020-07-131-0/+21
| | | | | | | Add SPDIF support. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6sx-sdb: Add SPDIF supportShengjiu Wang2020-07-131-0/+23
| | | | | | | Add SPDIF support. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6sx: Enable ASRC deviceShengjiu Wang2020-07-131-8/+18
| | | | | | | | Add compatible string, update the clock table, add fsl,asrc-rate and fsl,asrc-width property. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx53-ppd: alarm LEDs use kernel LED interfaceIan Ray2020-07-131-9/+40
| | | | | | | | | Use kernel LED interface for the alarm LEDs. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Samu Nuutamo <samu.nuutamo@vincit.fi> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6sll: Make ssi node name same as other platformsShengjiu Wang2020-07-131-3/+3
| | | | | | | | | | | | | | In imx6sll.dtsi, the ssi node name is different with other platforms (imx6qdl, imx6sl, imx6sx), but the sound/soc/fsl/fsl-asoc-card.c machine driver needs to check ssi node name for audmux configuration, then different ssi node name causes issue on imx6sll platform. So we change ssi node name to make all platforms have same name. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx: Change usdhc node name on i.MX6/i.MX7 SoCsAnson Huang2020-07-135-17/+17
| | | | | | | | Change i.MX6/i.MX7 SoCs usdhc node name from usdhc to mmc to be compliant with yaml schema, it requires the nodename to be "mmc". Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx: Change esdhc node name on i.MX2/i.MX3/i.MX5 SoCsAnson Huang2020-07-135-17/+17
| | | | | | | | Change i.MX2/i.MX3/i.MX5 SoCs esdhc node name from esdhc to mmc to be compliant with yaml schema, it requires the nodename to be "mmc". Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx: Change sdhci node name on i.MX27/i.MX31 SoCsAnson Huang2020-07-132-5/+5
| | | | | | | | Change i.MX27/i.MX31 node name from sdhci to mmc to be compliant with yaml schema, it requires the nodename to be "mmc". Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx6qdl: Remove invalid interrupt for GPC nodeAnson Huang2020-07-131-2/+1
| | | | | | | | In latest i.MX6Q RM Rev.6, 05/2020, #90 SPI interrupt is reserved, so remove it from GPC node. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx: change iim node name on i.MX SoCsAnson Huang2020-07-136-6/+6
| | | | | | | | | | Change IIM node name from iim to efuse to be compliant with yaml schema, it requires the nodename to be one of "eeprom|efuse|nvram". Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx: change ocotp node name on MXS SoCsAnson Huang2020-07-132-2/+2
| | | | | | | | | | Change OCOTP node name from ocotp to efuse to be compliant with yaml schema, it requires the nodename to be one of "eeprom|efuse|nvram". Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx: change ocotp node name on i.MX6/7 SoCsAnson Huang2020-07-137-7/+7
| | | | | | | | | Change OCOTP node name from ocotp-ctrl to efuse to be compliant with yaml schema, it requires the nodename to be one of "eeprom|efuse|nvram". Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: ls1021a: output PPS signal on FIPER2Yangbo Lu2020-07-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The timer fixed interval period pulse generator register is used to generate periodic pulses. The down count register loads the value programmed in the fixed period interval (FIPER). At every tick of the timer accumulator overflow, the counter decrements by the value of TMR_CTRL[TCLK_PERIOD]. It generates a pulse when the down counter value reaches zero. It reloads the down counter in the cycle following a pulse. To use the TMR_FIPER register to generate desired periodic pulses. The value should programmed is, desired_period - tclk_period Current tmr-fiper2 value is to generate 100us periodic pulses. (But the value should have been 99995, not 99990. The tclk_period is 5.) This patch is to generate 1 second periodic pulses with value 999999995 programmed which is more desired by user. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* ARM: dts: imx: Make tempmon node as child of anatop nodeAnson Huang2020-07-136-61/+61
| | | | | | | | | i.MX6/7 SoCs' temperature sensor is inside anatop module from HW perspective, so it should be a child node of anatop. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* Merge tag 'kbuild-v5.8-2' of ↵Linus Torvalds2020-06-131-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues
| * kbuild: fix broken builds because of GZIP,BZIP2,LZOP variablesDenis Efremov2020-06-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Redefine GZIP, BZIP2, LZOP variables as KGZIP, KBZIP2, KLZOP resp. GZIP, BZIP2, LZOP env variables are reserved by the tools. The original attempt to redefine them internally doesn't work in makefiles/scripts intercall scenarios, e.g., "make GZIP=gzip bindeb-pkg" and results in broken builds. There can be other broken build commands because of this, so the universal solution is to use non-reserved env variables for the compression tools. Fixes: 8dfb61dcbace ("kbuild: add variables for compression tools") Signed-off-by: Denis Efremov <efremov@linux.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* | ARM: 8985/1: efi/decompressor: deal with HYP mode boot gracefullyArd Biesheuvel2020-06-131-0/+62
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | EFI on ARM only supports short descriptors, and given that it mandates that the MMU and caches are on, it is implied that booting in HYP mode is not supported. However, implementations of EFI exist (i.e., U-Boot) that ignore this requirement, which is not entirely unreasonable, given that it makes HYP mode inaccessible to the operating system. So let's make sure that we can deal with this condition gracefully. We already tolerate booting the EFI stub with the caches off (even though this violates the EFI spec as well), and so we should deal with HYP mode boot with MMU and caches either on or off. - When the MMU and caches are on, we can ignore the HYP stub altogether, since we can carry on executing at HYP. We do need to ensure that we disable the MMU at HYP before entering the kernel proper. - When the MMU and caches are off, we have to drop to SVC mode so that we can set up the page tables using short descriptors. In this case, we need to install the HYP stub as usual, so that we can return to HYP mode before handing over to the kernel proper. Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
* Merge tag 'usb-5.8-rc1' of ↵Linus Torvalds2020-06-076-509/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY driver updates from Greg KH: "Here are the large set of USB and PHY driver updates for 5.8-rc1. Nothing huge, just lots of little things: - USB gadget fixes and additions all over the place - new PHY drivers - PHY driver fixes and updates - XHCI driver updates - musb driver updates - more USB-serial driver ids added - various USB quirks added - thunderbolt minor updates and fixes - typec updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits) usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs usb: dwc3: meson-g12a: fix error path when fetching the reset line fails Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings" Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180" Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver" USB: serial: ch341: fix lockup of devices with limited prescaler USB: serial: ch341: add basis for quirk detection CDC-ACM: heed quirk also in error handling USB: serial: option: add Telit LE910C1-EUX compositions usb: musb: Fix runtime PM imbalance on error usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle usb: musb: use true for 'use_dma' usb: musb: start session in resume for host port usb: musb: return -ESHUTDOWN in urb when three-strikes error happened USB: serial: qcserial: add DW5816e QDL support thunderbolt: Add trivial .shutdown usb: dwc3: keystone: Turn on USB3 PHY before controller dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property dt-bindings: usb: convert keystone-usb.txt to YAML ...
| * Merge tag 'usb-for-v5.8' of ↵Greg Kroah-Hartman2020-05-256-509/+0
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v5.8 merge window Rather busy cycle. We have a total 99 non-merge commits going into v5.8 merge window. The majority of the changes are in dwc3 this around (31.7% of all changes). It's composed mostly Thinh's recent updates to get dwc3 to behave correctly with stream transfers. We have also have Roger's for Keystone platforms and Neil's updates for the meson glue layer. Apart from those, we have the usual set of non-critical fixes, new device IDs, spelling fixes all over the place. Signed-off-by: Felipe Balbi <balbi@kernel.org> * tag 'usb-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (99 commits) usb: dwc3: keystone: Turn on USB3 PHY before controller dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property dt-bindings: usb: convert keystone-usb.txt to YAML usb: dwc3: gadget: Check for prepared TRBs usb: gadget: Fix issue with config_ep_by_speed function usb: cdns3: ep0: delete the redundant status stage usb: dwc2: Update Core Reset programming flow. usb: gadget: fsl: Fix a wrong judgment in fsl_udc_probe() usb: gadget: fix potential double-free in m66592_probe. usb: cdns3: Fix runtime PM imbalance on error usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check usb: dwc3: Increase timeout for CmdAct cleared by device controller USB: dummy-hcd: use configurable endpoint naming scheme usb: cdns3: gadget: assign interrupt number to USB gadget structure usb: gadget: core: sync interrupt before unbind the udc arm64: dts: qcom: sc7180: Add interconnect properties for USB arm64: dts: qcom: sdm845: Add interconnect properties for USB dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver ARM: dts: at91: Remove the USB EP child node dt-bindings: usb: atmel: Mark EP child node as deprecated ...
| | * ARM: dts: at91: Remove the USB EP child nodeGregory CLEMENT2020-05-256-509/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The endpoint configuration used to be stored in the device tree, however the configuration depend on the "version" of the controller itself. Then the EP child node are useless and describe as deprecated in the documentation binding: remove all the nodes from the SoC device tree file. Remove also the #address-cells and #size-cells properties that are no longer needed. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
* | | Merge tag 'kbuild-v5.8' of ↵Linus Torvalds2020-06-061-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32 - ensure to rebuild all objects when the compiler is upgraded - exclude system headers from dependency tracking and fixdep processing - fix potential bit-size mismatch between the kernel and BPF user-mode helper - add the new syntax 'userprogs' to build user-space programs for the target architecture (the same arch as the kernel) - compile user-space sample code under samples/ for the target arch instead of the host arch - make headers_install fail if a CONFIG option is leaked to user-space - sanitize the output format of scripts/checkstack.pl - handle ARM 'push' instruction in scripts/checkstack.pl - error out before modpost if a module name conflict is found - error out when multiple directories are passed to M= because this feature is broken for a long time - add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info - a lot of cleanups of modpost - dump vmlinux symbols out into vmlinux.symvers, and reuse it in the second pass of modpost - do not run the second pass of modpost if nothing in modules is updated - install modules.builtin(.modinfo) by 'make install' as well as by 'make modules_install' because it is useful even when CONFIG_MODULES=n - add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ to allow users to use alternatives such as pigz, pbzip2, etc. * tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits) kbuild: add variables for compression tools Makefile: install modules.builtin even if CONFIG_MODULES=n mksysmap: Fix the mismatch of '.L' symbols in System.map kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS modpost: change elf_info->size to size_t modpost: remove is_vmlinux() helper modpost: strip .o from modname before calling new_module() modpost: set have_vmlinux in new_module() modpost: remove mod->skip struct member modpost: add mod->is_vmlinux struct member modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}() modpost: remove mod->is_dot_o struct member modpost: move -d option in scripts/Makefile.modpost modpost: remove -s option modpost: remove get_next_text() and make {grab,release_}file static modpost: use read_text_file() and get_line() for reading text files modpost: avoid false-positive file open error modpost: fix potential mmap'ed file overrun in get_src_version() modpost: add read_text_file() and get_line() helpers modpost: do not call get_modinfo() for vmlinux(.o) ...
| * | | kbuild: add variables for compression toolsDenis Efremov2020-06-061-1/+1
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow user to use alternative implementations of compression tools, such as pigz, pbzip2, pxz. For example, multi-threaded tools to speed up the build: $ make GZIP=pigz BZIP2=pbzip2 Variables _GZIP, _BZIP2, _LZOP are used internally because original env vars are reserved by the tools. The use of GZIP in gzip tool is obsolete since 2015. However, alternative implementations (e.g., pigz) still rely on it. BZIP2, BZIP, LZOP vars are not obsolescent. The credit goes to @grsecurity. As a sidenote, for multi-threaded lzma, xz compression one can use: $ export XZ_OPT="--threads=0" Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* | | Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2020-06-04236-2829/+12200
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM devicetree updates from Arnd Bergmann: "This is the set of device tree changes, mostly covering new hardware support, with 577 patches touching a little over 500 files. There are five new Arm SoCs supported in this release, all of them for existing SoC families: - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS devices and Android Set-top-box designs, along with the "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4 single-board computer. - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and the iW-RainboW-G21D-Qseven-RZG1H board/SoM - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO Advance game console Newly added machines on already supported SoCs are: - AMLogic S905D based Smartlabs SML-5442TW TV box - AMLogic S905X3 based ODROID-C4 SBC - AMLogic S922XH based Beelink GT-King Pro TV box - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO OpenPower P9 "Nicole" - Marvell Kirkwood based Check Point L-50 router - Mediatek MT8173 based Elm/Hana Chromebook laptops - Microchip SAMA5D2 "Industrial Connectivity Platform" reference board - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit - Octavo OSDMP15x based Linux Automation MC-1 development board - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone - Realtek RTD1295 based Xnano X5 TV Box - STMicroelectronics STM32MP1 based Stinger96 single-board computer and IoT Box - Samsung Exynos4210 based based Samsung Galaxy S2 phone - Socionext Uniphier based Akebi96 SBC - TI Keystone based K2G Evaluation board - TI am5729 based Beaglebone-AI development board Include device descriptions for additional hardware support in existing SoCs and machines based on all major SoC platforms: - AMlogic Meson - Allwinner sunxi - Arm Juno/VFP/Vexpress/Integrator - Broadcom bcm283x/bcm2711 - Hisilicon hi6220 - Marvell EBU - Mediatek MT27xx, MT76xx, MT81xx and MT67xx - Microchip SAMA5D2 - NXP i.MX6/i.MX7/i.MX8 and Layerscape - Nvidia Tegra - Qualcomm Snapdragon - Renesas r8a77961, r8a7791 - Rockchips RK32xx/RK33xx - ST-Ericsson ux500 - STMicroelectronics SMT32 - Samsung Exynos and S5PV210 - Socionext Uniphier - TI OMAP5/DRA7 and Keystone" * tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits) ARM: dts: keystone: Rename "msmram" node to "sram" arm: dts: mt2712: add uart APDMA to device tree arm64: dts: mt8183: add mmc node arm64: dts: mt2712: add ethernet device node arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1 ARM: dts: mmp3: Add the fifth SD HCI ARM: dts: berlin*: Fix up the SDHCI node names ARM: dts: mmp3: Fix USB & USB PHY node names ARM: dts: mmp3: Fix L2 cache controller node name ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa910: Fix the gpio interrupt cell number ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property ARM: dts: pxa168: Fix the gpio interrupt cell number ARM: dts: pxa168: Add missing address/size cells to i2c nodes ARM: dts: dove: Fix interrupt controller node name ARM: dts: kirkwood: Fix interrupt controller node name arm64: dts: Add SC9863A emmc and sd card nodes arm64: dts: Add SC9863A clock nodes arm64: dts: mt6358: add PMIC MT6358 related nodes ...
| * \ \ Merge tag 'keystone_dts_for_5.7' of ↵Arnd Bergmann2020-06-022-0/+123
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/dt ARM: Keystone DTS updates for 5.7 Add display support for K2G EVM Board * tag 'keystone_dts_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone-k2g-evm: add HDMI video support ARM: dts: keystone-k2g: Add DSS node Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | | ARM: dts: keystone-k2g-evm: add HDMI video supportJyri Sarha2020-03-071-0/+101
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add DT nodes for HDMI video support for K2G EVM. The HDMI uses SiI9022 DPI as HDMI encoder. The DSS DPI is connected to SiI9022 HDMI encoder's video input and encoder's output goes to HDMI connector. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
| | * | | ARM: dts: keystone-k2g: Add DSS nodeJyri Sarha2020-03-071-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add DT node for DSS. K2G has DSS version 6. Keystone family DSS are somewhat different compered to the old OMAP family DSSes and the binding looks different too. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
| * | | | Merge tag 'keystone_dts_for_5.8' of ↵Arnd Bergmann2020-05-284-8/+8
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/dt ARM: dts: Keystone update for v5.8 - Rename "msmram" node to "sram" * tag 'keystone_dts_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone: Rename "msmram" node to "sram" Link: https://lore.kernel.org/r/1590638489-12023-2-git-send-email-santosh.shilimkar@oracle.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | | | ARM: dts: keystone: Rename "msmram" node to "sram"Krzysztof Kozlowski2020-05-274-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device node name should reflect generic class of a device so rename the "msmram" node and its children to "sram". This will be also in sync with upcoming DT schema. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
| * | | | | Merge tag 'imx-dt-5.8' of ↵Arnd Bergmann2020-05-2630-55/+384
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX device tree changes for 5.8: - A series from Anson Huang updating SRC devices to match bindings schema definition. - Correct CPU supply name and add cpu1 supply for i.MX7D. - Convert thermal device to use nvmem interface to get fuse data for imx6qdl and imx6sl. - A series from Tim Harvey to update imx6qdl-gw devices, adding support of LSM9DS1 IIO imu/magn, USB OTG, bcm4330-bt, etc. - Add input MUX for ENET2 MDIO into IMX7D pin functions. - Misc random device addition or update. * tag 'imx-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits) ARM: dts: imx53-cx9020: Group port definitions for the dvi-converter ARM: dts: imx5: make src node name generic ARM: dts: imx50: Add src node interrupt ARM: dts: imx: make src node name generic ARM: dts: imx7d-pinfunc: add input mux for ENET2 mdio ARM: dts: imx6sl: Use nvmem interface to get fuse data ARM: dts: imx6qdl: Use nvmem interface to get fuse data ARM: dts: imx6qdl-gw5910: fix wlan regulator ARM: dts: imx6qdl-gw5910: add support for bcm4330-bt ARM: dts: imx6qdl-gw5904: add lsm9ds1 iio imu/magn support ARM: dts: imx6qdl-gw560x: add lsm9ds1 iio imu/magn support ARM: dts: imx53: Add src node interrupt ARM: dts: imx51: Add src node interrupt ARM: dts: imx50: Remove unused iomuxc-gpr node ARM: dts: imx6qdl-gw552x: add USB OTG support ARM: dts: imx6-sr-som: add ethernet PHY configuration arm: dts: ls1021atwr: Add QSPI node properties ARM: dts: e60k02: add interrupt for PMIC ARM: dts: colibri: introduce device trees with UHS-I support ARM: dts: imx7d: Add cpu1 supply ... Link: https://lore.kernel.org/r/20200523032516.11016-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | | | | ARM: dts: imx53-cx9020: Group port definitions for the dvi-converterRicardo Cañuelo2020-05-201-11/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Group the port definitions of the dvi-converter in a 'ports' node to make it compliant with the ti,tfp410 binding. Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx5: make src node name genericAnson Huang2020-05-203-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Node name should be generic, use "reset-controller" instead of "src" for i.MX5 SoCs src nodes. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx50: Add src node interruptAnson Huang2020-05-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Interrupt is a required property according to SRC binding, add it for SRC node. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx: make src node name genericAnson Huang2020-05-205-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Node name should be generic, use "reset-controller" instead of "src" for i.MX6/i.MX7 SoCs src nodes. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
View Lorry Controller Status