summaryrefslogtreecommitdiff
path: root/arch/x86/boot/header.S
Commit message (Collapse)AuthorAgeFilesLines
* efi: x86: Fix config name for setting the NX-compatibility flag in the PE headerLukas Bulwahn2022-06-011-1/+1
| | | | | | | | | | | | | | | | | Commit 21b68da7bf4a ("efi: x86: Set the NX-compatibility flag in the PE header") intends to set the compatibility flag, i.e., IMAGE_DLL_CHARACTERISTICS_NX_COMPAT, but this ifdef is actually dead as the CONFIG_DXE_MEM_ATTRIBUTES Kconfig option does not exist. The config is actually called EFI_DXE_MEM_ATTRIBUTES. Adjust the ifdef to use the intended config name. The issue was identified with ./scripts/checkkconfigsymbols.py. Fixes: 21b68da7bf4a ("efi: x86: Set the NX-compatibility flag in the PE header") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20220601115043.7678-1-lukas.bulwahn@gmail.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
* efi: x86: Set the NX-compatibility flag in the PE headerPeter Jones2022-05-031-0/+4
| | | | | | | | | | | Following Baskov Evgeniy's "Handle UEFI NX-restricted page tables" patches, it's safe to set this compatibility flag to let loaders know they don't need to make special accommodations for kernel to load if pre-boot NX is enabled. Signed-off-by: Peter Jones <pjones@redhat.com> Link: https://lore.kernel.org/all/20220329184743.798513-1-pjones@redhat.com/ Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
* x86: Bump ZO_z_extra_bytes margin for zstdNick Terrell2020-07-311-1/+7
| | | | | | | | | | | | | | | | | | | | Bump the ZO_z_extra_bytes margin for zstd. Zstd needs 3 bytes per 128 KB, and has a 22 byte fixed overhead. Zstd needs to maintain 128 KB of space at all times, since that is the maximum block size. See the comments regarding in-place decompression added in lib/decompress_unzstd.c for details. The existing code is written so that all the compression algorithms use the same ZO_z_extra_bytes. It is taken to be the maximum of the growth rate plus the maximum fixed overhead. The comments just above this diff state that: Signed-off-by: Nick Terrell <terrelln@fb.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20200730190841.2071656-6-nickrterrell@gmail.com
* efi/x86: Add kernel preferred address to PE headerArvind Sankar2020-03-081-2/+4
| | | | | | | | | | | | | Store the kernel's link address as ImageBase in the PE header. Note that the PE specification requires the ImageBase to be 64k aligned. The preferred address should almost always satisfy that, except for 32-bit kernel if the configuration has been customized. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200303221205.4048668-4-nivedita@alum.mit.edu Link: https://lore.kernel.org/r/20200308080859.21568-18-ardb@kernel.org
* efi/libstub: Introduce symbolic constants for the stub major/minor versionArd Biesheuvel2020-02-231-2/+2
| | | | | | | | | | Now that we have added new ways to load the initrd or the mixed mode kernel, we will also need a way to tell the loader about this. Add symbolic constants for the PE/COFF major/minor version numbers (which fortunately have always been 0x0 for all architectures), so that we can bump them later to document the capabilities of the stub. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
* efi/x86: Use symbolic constants in PE header instead of bare numbersArd Biesheuvel2020-02-231-30/+32
| | | | | | | Replace bare numbers in the PE/COFF header structure with symbolic constants so they become self documenting. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
* efi/x86: Add true mixed mode entry point into .compat sectionArd Biesheuvel2020-02-231-1/+19
| | | | | | | | | | | | | | | | | | | Currently, mixed mode is closely tied to the EFI handover protocol and relies on intimate knowledge of the bootparams structure, setup header etc, all of which are rather byzantine and entirely specific to x86. Even though no other EFI supported architectures are currently known that could support something like mixed mode, it still makes sense to abstract a bit from this, and make it part of a generic Linux on EFI boot protocol. To that end, add a .compat section to the mixed mode binary, and populate it with the PE machine type and entry point address, allowing firmware implementations to match it to their native machine type, and invoke non-native binaries using a secondary entry point. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
* efi/x86: Drop redundant .bss sectionArd Biesheuvel2020-02-231-20/+1
| | | | | | | | | | | | | | | | | | | In commit c7fb93ec51d462ec ("x86/efi: Include a .bss section within the PE/COFF headers") we added a separate .bss section to the PE/COFF header of the compressed kernel describing the static memory footprint of the decompressor, to ensure that it has enough headroom to decompress itself. We can achieve the exact same result by increasing the virtual size of the .text section, without changing the raw size, which, as per the PE/COFF specification, requires the loader to zero initialize the delta. Doing so frees up a slot in the section table, which we will use later to describe the mixed mode entrypoint. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
* x86/boot: Introduce setup_indirectDaniel Kiper2019-11-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The setup_data is a bit awkward to use for extremely large data objects, both because the setup_data header has to be adjacent to the data object and because it has a 32-bit length field. However, it is important that intermediate stages of the boot process have a way to identify which chunks of memory are occupied by kernel data. Thus introduce an uniform way to specify such indirect data as setup_indirect struct and SETUP_INDIRECT type. And finally bump setup_header version in arch/x86/boot/header.S. Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com> Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Ross Philipson <ross.philipson@oracle.com> Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: ard.biesheuvel@linaro.org Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: dave.hansen@linux.intel.com Cc: eric.snowberg@oracle.com Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Juergen Gross <jgross@suse.com> Cc: kanth.ghatraju@oracle.com Cc: linux-doc@vger.kernel.org Cc: linux-efi <linux-efi@vger.kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: rdunlap@infradead.org Cc: ross.philipson@oracle.com Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Cc: xen-devel@lists.xenproject.org Link: https://lkml.kernel.org/r/20191112134640.16035-4-daniel.kiper@oracle.com
* x86/boot: Introduce kernel_infoDaniel Kiper2019-11-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The relationships between the headers are analogous to the various data sections: setup_header = .data boot_params/setup_data = .bss What is missing from the above list? That's right: kernel_info = .rodata We have been (ab)using .data for things that could go into .rodata or .bss for a long time, for lack of alternatives and -- especially early on -- inertia. Also, the BIOS stub is responsible for creating boot_params, so it isn't available to a BIOS-based loader (setup_data is, though). setup_header is permanently limited to 144 bytes due to the reach of the 2-byte jump field, which doubles as a length field for the structure, combined with the size of the "hole" in struct boot_params that a protected-mode loader or the BIOS stub has to copy it into. It is currently 119 bytes long, which leaves us with 25 very precious bytes. This isn't something that can be fixed without revising the boot protocol entirely, breaking backwards compatibility. boot_params proper is limited to 4096 bytes, but can be arbitrarily extended by adding setup_data entries. It cannot be used to communicate properties of the kernel image, because it is .bss and has no image-provided content. kernel_info solves this by providing an extensible place for information about the kernel image. It is readonly, because the kernel cannot rely on a bootloader copying its contents anywhere, but that is OK; if it becomes necessary it can still contain data items that an enabled bootloader would be expected to copy into a setup_data chunk. Do not bump setup_header version in arch/x86/boot/header.S because it will be followed by additional changes coming into the Linux/x86 boot protocol. Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com> Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Ross Philipson <ross.philipson@oracle.com> Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: ard.biesheuvel@linaro.org Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: dave.hansen@linux.intel.com Cc: eric.snowberg@oracle.com Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Juergen Gross <jgross@suse.com> Cc: kanth.ghatraju@oracle.com Cc: linux-doc@vger.kernel.org Cc: linux-efi <linux-efi@vger.kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: rdunlap@infradead.org Cc: ross.philipson@oracle.com Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Cc: xen-devel@lists.xenproject.org Link: https://lkml.kernel.org/r/20191112134640.16035-2-daniel.kiper@oracle.com
* Merge tag 'docs-5.3' of git://git.lwn.net/linuxLinus Torvalds2019-07-091-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull Documentation updates from Jonathan Corbet: "It's been a relatively busy cycle for docs: - A fair pile of RST conversions, many from Mauro. These create more than the usual number of simple but annoying merge conflicts with other trees, unfortunately. He has a lot more of these waiting on the wings that, I think, will go to you directly later on. - A new document on how to use merges and rebases in kernel repos, and one on Spectre vulnerabilities. - Various improvements to the build system, including automatic markup of function() references because some people, for reasons I will never understand, were of the opinion that :c:func:``function()`` is unattractive and not fun to type. - We now recommend using sphinx 1.7, but still support back to 1.4. - Lots of smaller improvements, warning fixes, typo fixes, etc" * tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits) docs: automarkup.py: ignore exceptions when seeking for xrefs docs: Move binderfs to admin-guide Disable Sphinx SmartyPants in HTML output doc: RCU callback locks need only _bh, not necessarily _irq docs: format kernel-parameters -- as code Doc : doc-guide : Fix a typo platform: x86: get rid of a non-existent document Add the RCU docs to the core-api manual Documentation: RCU: Add TOC tree hooks Documentation: RCU: Rename txt files to rst Documentation: RCU: Convert RCU UP systems to reST Documentation: RCU: Convert RCU linked list to reST Documentation: RCU: Convert RCU basic concepts to reST docs: filesystems: Remove uneeded .rst extension on toctables scripts/sphinx-pre-install: fix out-of-tree build docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/ Documentation: PGP: update for newer HW devices Documentation: Add section about CPU vulnerabilities for Spectre Documentation: platform: Delete x86-laptop-drivers.txt docs: Note that :c:func: should no longer be used ...
| * docs: fix broken documentation linksMauro Carvalho Chehab2019-06-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Mostly due to x86 and acpi conversion, several documentation links are still pointing to the old file. Fix them. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
* | x86/boot: Add xloadflags bits to check for 5-level paging supportBaoquan He2019-06-281-1/+11
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current kernel supports 5-level paging mode, and supports dynamically choosing the paging mode during bootup depending on the kernel image, hardware and kernel parameter settings. This flexibility brings several issues to kexec/kdump: 1) Dynamic switching between paging modes requires support in the target kernel. This means kexec from a 5-level paging kernel into a kernel which does not support mode switching is not possible. So the loader needs to be able to analyze the supported paging modes of the kexec target kernel. 2) If running on a 5-level paging kernel and the kexec target kernel is a 4-level paging kernel, the target immage cannot be loaded above the 64TB address space limit. But the kexec loader searches for a load area from top to bottom which would eventually put the target kernel above 64TB when the machine has large enough RAM size. So the loader needs to be able to analyze the paging mode of the target kernel to load it at a suitable spot in the address space. Solution: Add two bits XLF_5LEVEL and XLF_5LEVEL_ENABLED: - Bit XLF_5LEVEL indicates whether 5-level paging mode switching support is available. (Issue #1) - Bit XLF_5LEVEL_ENABLED indicates whether the kernel was compiled with full 5-level paging support (CONFIG_X86_5LEVEL=y). (Issue #2) The loader will use these bits to verify whether the target kernel is suitable to be kexec'ed to from a 5-level paging kernel and to determine the constraints of the target kernel load address. The flags will be used by the kernel kexec subsystem and the userspace kexec tools. [ tglx: Massaged changelog ] Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: dyoung@redhat.com Link: https://lkml.kernel.org/r/20190524073810.24298-2-bhe@redhat.com
* x86/boot: Mostly revert commit ae7e1238e68f2a ("Add ACPI RSDP address to ↵Juergen Gross2018-11-201-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | setup_header") Peter Anvin pointed out that commit: ae7e1238e68f2a ("x86/boot: Add ACPI RSDP address to setup_header") should be reverted as setup_header should only contain items set by the legacy BIOS. So revert said commit. Instead of fully reverting the dependent commit of: e7b66d16fe4172 ("x86/acpi, x86/boot: Take RSDP address for boot params if available") just remove the setup_header reference in order to replace it by a boot_params in a followup patch. Suggested-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boris.ostrovsky@oracle.com Cc: bp@alien8.de Cc: daniel.kiper@oracle.com Cc: sstabellini@kernel.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20181120072529.5489-2-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* x86/boot: Add ACPI RSDP address to setup_headerJuergen Gross2018-10-101-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Xen PVH guests receive the address of the RSDP table from Xen. In order to support booting a Xen PVH guest via Grub2 using the standard x86 boot entry we need a way for Grub2 to pass the RSDP address to the kernel. For this purpose expand the struct setup_header to hold the physical address of the RSDP address. Being zero means it isn't specified and has to be located the legacy way (searching through low memory or EBDA). While documenting the new setup_header layout and protocol version 2.14 add the missing documentation of protocol version 2.13. There are Grub2 versions in several distros with a downstream patch violating the boot protocol by writing past the end of setup_header. This requires another update of the boot protocol to enable the kernel to distinguish between a specified RSDP address and one filled with garbage by such a broken Grub2. From protocol 2.14 on Grub2 will write the version it is supporting (but never a higher value than found to be supported by the kernel) ored with 0x8000 to the version field of setup_header. This enables the kernel to know up to which field Grub2 has written information to. All fields after that are supposed to be clobbered. Signed-off-by: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boris.ostrovsky@oracle.com Cc: bp@alien8.de Cc: corbet@lwn.net Cc: linux-doc@vger.kernel.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20181010061456.22238-3-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds2017-11-131-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot updates from Ingo Molnar: "Three smaller changes: - clang fix - boot message beautification - unnecessary header inclusion removal" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Disable Clang warnings about GNU extensions x86/boot: Remove unnecessary #include <generated/utsrelease.h> x86/boot: Spell out "boot CPU" for BP
| * x86/boot: Remove unnecessary #include <generated/utsrelease.h>Masahiro Yamada2017-10-111-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | The <generated/utsrelease.h> defines UTS_RELEASE, but I do not see any reference to it in arch/x86/boot/header.S. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1505921232-8960-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/boot: Provide more slack space during decompressionJan H. Schönherr2017-08-291-1/+7
| | | | | | | | | | | | | | | | | | The current slack space is not enough for LZ4, which has a worst case overhead of 0.4% for data that cannot be further compressed. With an LZ4 compressed kernel with an embedded initrd, the output is likely to overwrite the input. Increase the slack space to avoid that. Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1503842124-29718-1-git-send-email-jschoenh@amazon.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
* x86/boot/e820: Remove assembly guard from asm/e820/types.hIngo Molnar2017-01-281-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's an assembly guard in asm/e820/types.h, and only a single .S file includes this header: arch/x86/boot/header.S, but it does not actually make use of any of the E820 defines. Remove the inclusion and remove the assembly guard as well. No change in functionality. Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* x86/boot/e820: Move asm/e820.h to asm/e820/api.hIngo Molnar2017-01-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In line with asm/e820/types.h, move the e820 API declarations to asm/e820/api.h and update all usage sites. This is just a mechanical, obviously correct move & replace patch, there will be subsequent changes to clean up the code and to make better use of the new header organization. Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* x86/boot: Calculate decompression size during boot not buildYinghai Lu2016-04-291-10/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently z_extract_offset is calculated in boot/compressed/mkpiggy.c. This doesn't work well because mkpiggy.c doesn't know the details of the decompressor in use. As a result, it can only make an estimation, which has risks: - output + output_len (VO) could be much bigger than input + input_len (ZO). In this case, the decompressed kernel plus relocs could overwrite the decompression code while it is running. - The head code of ZO could be bigger than z_extract_offset. In this case an overwrite could happen when the head code is running to move ZO to the end of buffer. Though currently the size of the head code is very small it's still a potential risk. Since there is no rule to limit the size of the head code of ZO, it runs the risk of suddenly becoming a (hard to find) bug. Instead, this moves the z_extract_offset calculation into header.S, and makes adjustments to be sure that the above two cases can never happen, and further corrects the comments describing the calculations. Since we have (in the previous patch) made ZO always be located against the end of decompression buffer, z_extract_offset is only used here to calculate an appropriate buffer size (INIT_SIZE), and is not longer used elsewhere. As such, it can be removed from voffset.h. Additionally clean up #if/#else #define to improve readability. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Baoquan He <bhe@redhat.com> [ Rewrote the changelog and comments. ] Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: lasse.collin@tukaani.org Link: http://lkml.kernel.org/r/1461888548-32439-4-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* x86/KASLR: Update description for decompressor worst case sizeBaoquan He2016-04-221-0/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The comment that describes the analysis for the size of the decompressor code only took gzip into account (there are currently 6 other decompressors that could be used). The actual z_extract_offset calculation in code was already handling the correct maximum size, but this documentation hadn't been updated. This updates the documentation, fixes several typos, moves the comment to header.S, updates references, and adds a note at the end of the decompressor include list to remind us about updating the comment in the future. (Instead of moving the comment to mkpiggy.c, where the calculation is currently happening, it is being moved to header.S because the calculations in mkpiggy.c will be removed in favor of header.S calculations in a following patch, and it seemed like overkill to move the giant comment twice, especially when there's already reference to z_extract_offset in header.S.) Signed-off-by: Baoquan He <bhe@redhat.com> [ Rewrote changelog, cleaned up comment style, moved comments around. ] Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: H.J. Lu <hjl.tools@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1461185746-8017-2-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* Merge branch 'x86/urgent' into core/efi, to pick up a pending EFI fixIngo Molnar2015-10-141-1/+1
|\ | | | | | | Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * kexec: split kexec_load syscall from kexec core codeDave Young2015-09-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two kexec load syscalls, kexec_load another and kexec_file_load. kexec_file_load has been splited as kernel/kexec_file.c. In this patch I split kexec_load syscall code to kernel/kexec.c. And add a new kconfig option KEXEC_CORE, so we can disable kexec_load and use kexec_file_load only, or vice verse. The original requirement is from Ted Ts'o, he want kexec kernel signature being checked with CONFIG_KEXEC_VERIFY_SIG enabled. But kexec-tools use kexec_load syscall can bypass the checking. Vivek Goyal proposed to create a common kconfig option so user can compile in only one syscall for loading kexec kernel. KEXEC/KEXEC_FILE selects KEXEC_CORE so that old config files still work. Because there's general code need CONFIG_KEXEC_CORE, so I updated all the architecture Kconfig with a new option KEXEC_CORE, and let KEXEC selects KEXEC_CORE in arch Kconfig. Also updated general kernel code with to kexec_load syscall. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Dave Young <dyoung@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Revert "x86/efi: Request desired alignment via the PE/COFF headers"Matt Fleming2015-08-081-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit: aeffc4928ea2 ("x86/efi: Request desired alignment via the PE/COFF headers") Linn reports that Signtool complains that kernels built with CONFIG_EFI_STUB=y are violating the PE/COFF specification because the 'SizeOfImage' field is not a multiple of 'SectionAlignment'. This violation was introduced as an optimisation to skip having the kernel relocate itself during boot and instead have the firmware place it at a correctly aligned address. No one else has complained and I'm not aware of any firmware implementations that refuse to boot with commit aeffc4928ea2, but it's a real bug, so revert the offending commit. Reported-by: Linn Crosetto <linn@hp.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Brown <mbrown@fensystems.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1438936621-5215-3-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
* Merge branch 'x86-efi-for-linus' of ↵Linus Torvalds2014-08-041-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI changes from Ingo Molnar: "Main changes in this cycle are: - arm64 efi stub fixes, preservation of FP/SIMD registers across firmware calls, and conversion of the EFI stub code into a static library - Ard Biesheuvel - Xen EFI support - Daniel Kiper - Support for autoloading the efivars driver - Lee, Chun-Yi - Use the PE/COFF headers in the x86 EFI boot stub to request that the stub be loaded with CONFIG_PHYSICAL_ALIGN alignment - Michael Brown - Consolidate all the x86 EFI quirks into one file - Saurabh Tangri - Additional error logging in x86 EFI boot stub - Ulf Winkelvos - Support loading initrd above 4G in EFI boot stub - Yinghai Lu - EFI reboot patches for ACPI hardware reduced platforms" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits) efi/arm64: Handle missing virtual mapping for UEFI System Table arch/x86/xen: Silence compiler warnings xen: Silence compiler warnings x86/efi: Request desired alignment via the PE/COFF headers x86/efi: Add better error logging to EFI boot stub efi: Autoload efivars efi: Update stale locking comment for struct efivars arch/x86: Remove efi_set_rtc_mmss() arch/x86: Replace plain strings with constants xen: Put EFI machinery in place xen: Define EFI related stuff arch/x86: Remove redundant set_bit(EFI_MEMMAP) call arch/x86: Remove redundant set_bit(EFI_SYSTEM_TABLES) call efi: Introduce EFI_PARAVIRT flag arch/x86: Do not access EFI memory map if it is not available efi: Use early_mem*() instead of early_io*() arch/ia64: Define early_memunmap() x86/reboot: Add EFI reboot quirk for ACPI Hardware Reduced flag efi/reboot: Allow powering off machines using EFI efi/reboot: Add generic wrapper around EfiResetSystem() ...
| * x86/efi: Request desired alignment via the PE/COFF headersMichael Brown2014-07-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The EFI boot stub goes to great pains to relocate the kernel image to an appropriately aligned address, as indicated by the ->kernel_alignment field in the bzImage header. However, for the PE stub entry case, we can request that the EFI PE/COFF loader do the work for us. Fix by exposing the desired alignment via the SectionAlignment field in the PE/COFF headers. Despite its name, this field provides an overall alignment requirement for the loaded file. (Naturally, the FileAlignment field describes the alignment for individual sections.) There is no way in the PE/COFF headers to express the concept of min_alignment; we therefore do not expose the minimum (as opposed to preferred) alignment. Signed-off-by: Michael Brown <mbrown@fensystems.co.uk> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
* | x86/efi: Include a .bss section within the PE/COFF headersMichael Brown2014-07-101-4/+22
|/ | | | | | | | | | | | | | | | The PE/COFF headers currently describe only the initialised-data portions of the image, and result in no space being allocated for the uninitialised-data portions. Consequently, the EFI boot stub will end up overwriting unexpected areas of memory, with unpredictable results. Fix by including a .bss section in the PE/COFF headers (functionally equivalent to the init_size field in the bzImage header). Signed-off-by: Michael Brown <mbrown@fensystems.co.uk> Cc: Thomas Bächler <thomas@archlinux.org> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
* x86/boot: EFI_MIXED should not prohibit loading above 4GMatt Fleming2014-06-071-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 7d453eee36ae ("x86/efi: Wire up CONFIG_EFI_MIXED") introduced a regression for the functionality to load kernels above 4G. The relevant (incorrect) reasoning behind this change can be seen in the commit message, "The xloadflags field in the bzImage header is also updated to reflect that the kernel supports both entry points by setting both of XLF_EFI_HANDOVER_32 and XLF_EFI_HANDOVER_64 when CONFIG_EFI_MIXED=y. XLF_CAN_BE_LOADED_ABOVE_4G is disabled so that the kernel text is guaranteed to be addressable with 32-bits." This is obviously bogus since 32-bit EFI loaders will never place the kernel above the 4G mark. So this restriction is entirely unnecessary. But things are worse than that - since we want to encourage people to always compile with CONFIG_EFI_MIXED=y so that their kernels work out of the box for both 32-bit and 64-bit firmware, commit 7d453eee36ae effectively disables XLF_CAN_BE_LOADED_ABOVE_4G completely. Remove the overzealous and superfluous restriction and restore the XLF_CAN_BE_LOADED_ABOVE_4G functionality. Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1402140380-15377-1-git-send-email-matt@console-pimps.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* Merge branch 'x86-efi-for-linus' of ↵Linus Torvalds2014-03-311-12/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 EFI changes from Ingo Molnar: "The main changes: - Add debug code to the dump EFI pagetable - Borislav Petkov - Make 1:1 runtime mapping robust when booting on machines with lots of memory - Borislav Petkov - Move the EFI facilities bits out of 'x86_efi_facility' and into efi.flags which is the standard architecture independent place to keep EFI state, by Matt Fleming. - Add 'EFI mixed mode' support: this allows 64-bit kernels to be booted from 32-bit firmware. This needs a bootloader that supports the 'EFI handover protocol'. By Matt Fleming" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits) x86, efi: Abstract x86 efi_early calls x86/efi: Restore 'attr' argument to query_variable_info() x86/efi: Rip out phys_efi_get_time() x86/efi: Preserve segment registers in mixed mode x86/boot: Fix non-EFI build x86, tools: Fix up compiler warnings x86/efi: Re-disable interrupts after calling firmware services x86/boot: Don't overwrite cr4 when enabling PAE x86/efi: Wire up CONFIG_EFI_MIXED x86/efi: Add mixed runtime services support x86/efi: Firmware agnostic handover entry points x86/efi: Split the boot stub into 32/64 code paths x86/efi: Add early thunk code to go from 64-bit to 32-bit x86/efi: Build our own EFI services pointer table efi: Add separate 32-bit/64-bit definitions x86/efi: Delete dead code when checking for non-native x86/mm/pageattr: Always dump the right page table in an oops x86, tools: Consolidate #ifdef code x86/boot: Cleanup header.S by removing some #ifdefs efi: Use NULL instead of 0 for pointer ...
| * x86/efi: Wire up CONFIG_EFI_MIXEDMatt Fleming2014-03-041-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the Kconfig option and bump the kernel header version so that boot loaders can check whether the handover code is available if they want. The xloadflags field in the bzImage header is also updated to reflect that the kernel supports both entry points by setting both of XLF_EFI_HANDOVER_32 and XLF_EFI_HANDOVER_64 when CONFIG_EFI_MIXED=y. XLF_CAN_BE_LOADED_ABOVE_4G is disabled so that the kernel text is guaranteed to be addressable with 32-bits. Note that no boot loaders should be using the bits set in xloadflags to decide which entry point to jump to. The entire scheme is based on the concept that 32-bit bootloaders always jump to ->handover_offset and 64-bit loaders always jump to ->handover_offset + 512. We set both bits merely to inform the boot loader that it's safe to use the native handover offset even if the machine type in the PE/COFF header claims otherwise. Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * x86/boot: Cleanup header.S by removing some #ifdefsMatt Fleming2014-03-041-7/+1
| | | | | | | | | | | | | | | | handover_offset is now filled out by build.c. Don't set a default value as it will be overwritten anyway. Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
* | x86, boot: Correct max ramdisk size nameBorislav Petkov2014-03-131-1/+1
|/ | | | | | | | | The name in struct bootparam is ->initrd_addr_max and not ramdisk_max. Fix that. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1394633584-5509-2-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* x86: Add xloadflags bit for EFI runtime support on kexecDave Young2013-12-291-1/+8
| | | | | | | | | | | | | | | | Old kexec-tools can not load new kernels. The reason is kexec-tools does not fill efi_info in x86 setup header previously, thus EFI failed to initialize. In new kexec-tools it will by default to fill efi_info and pass other EFI required infomation to 2nd kernel so kexec kernel EFI initialization can succeed finally. To prevent from breaking userspace, add a new xloadflags bit so kexec-tools can check the flag and switch to old logic. Signed-off-by: Dave Young <dyoung@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
* x86, boot: Support loading bzImage, boot_params and ramdisk above 4GYinghai Lu2013-01-291-1/+9
| | | | | | | | | | | | | | | | | | | | | | xloadflags bit 1 indicates that we can load the kernel and all data structures above 4G; it is set if kernel is relocatable and 64bit. bootloader will check if xloadflags bit 1 is set to decide if it could load ramdisk and kernel high above 4G. bootloader will fill value to ext_ramdisk_image/size for high 32bits when it load ramdisk above 4G. kernel use get_ramdisk_image/size to use ext_ramdisk_image/size to get right positon for ramdisk. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Rob Landley <rob@landley.net> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Gokul Caushik <caushik1@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Joe Millenbach <jmillenbach@gmail.com> Link: http://lkml.kernel.org/r/1359058816-7615-26-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* x86, boot: Define the 2.12 bzImage boot protocolH. Peter Anvin2013-01-271-10/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Define the 2.12 bzImage boot protocol: add xloadflags and additional fields to allow the command line, initramfs and struct boot_params to live above the 4 GiB mark. The xloadflags now communicates if this is a 64-bit kernel with the legacy 64-bit entry point and which of the EFI handover entry points are supported. Avoid adding new read flags to loadflags because of claimed bootloaders testing the whole byte for == 1 to determine bzImageness at least until the issue can be researched further. This is based on patches by Yinghai Lu and David Woodhouse. Originally-by: Yinghai Lu <yinghai@kernel.org> Originally-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1359058816-7615-26-git-send-email-yinghai@kernel.org Cc: Rob Landley <rob@landley.net> Cc: Gokul Caushik <caushik1@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Joe Millenbach <jmillenbach@gmail.com>
* x86: remove dummy long from EFI stubCesar Eduardo Barros2012-11-201-3/+0
| | | | | | | | | | | | | | | Commit 2e064b1 (x86, efi: Fix issue of overlapping .reloc section for EFI_STUB) removed a dummy reloc added by commit 291f363 (x86, efi: EFI boot stub support), but forgot to remove the dummy long used by that reloc. Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Tested-by: Lee G Rosenbaum <lee.g.rosenbaum@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
* x86, boot: Remove obsolete and unused constant RAMDISKPaul Bolle2012-08-201-4/+0
| | | | | | | | | | | The named constant RAMDISK is unused. It used to set the (obsolete) kernel boot header field ram_size, but its usage for that purpose got dropped in commit 5e47c478b0b69bc9bc3ba544e4b1ca3268f98fef ("x86: remove zImage support"). Now remove this constant too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Link: http://lkml.kernel.org/r/1345396003.1771.9.camel@x61.thuisdomein Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* Merge branch 'x86-efi-for-linus' of ↵Linus Torvalds2012-07-261-1/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pul x86/efi changes from Ingo Molnar: "This tree adds an EFI bootloader handover protocol, which, once supported on the bootloader side, will make bootup faster and might result in simpler bootloaders. The other change activates the EFI wall clock time accessors on x86-64 as well, instead of the legacy RTC readout." * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, efi: Handover Protocol x86-64/efi: Use EFI to deal with platform wall clock
| * x86, efi: Handover ProtocolMatt Fleming2012-07-201-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As things currently stand, traditional EFI boot loaders and the EFI boot stub are carrying essentially the same initialisation code required to setup an EFI machine for booting a kernel. There's really no need to have this code in two places and the hope is that, with this new protocol, initialisation and booting of the kernel can be left solely to the kernel's EFI boot stub. The responsibilities of the boot loader then become, o Loading the kernel image from boot media File system code still needs to be carried by boot loaders for the scenario where the kernel and initrd files reside on a file system that the EFI firmware doesn't natively understand, such as ext4, etc. o Providing a user interface Boot loaders still need to display any menus/interfaces, for example to allow the user to select from a list of kernels. Bump the boot protocol number because we added the 'handover_offset' field to indicate the location of the handover protocol entry point. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Jones <pjones@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Acked-and-Tested-by: Matthew Garrett <mjg@redhat.com> Link: http://lkml.kernel.org/r/1342689828-16815-1-git-send-email-matt@console-pimps.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* | Merge branches 'x86-cleanups-for-linus' and 'x86-cpufeature-for-linus' of ↵Linus Torvalds2012-07-261-7/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanup and cpufeature from Ingo Molnar: "Just a single cleanup and and a commit that adds new CPU feature names" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, boot: Remove ancient, unconditionally #ifdef'd out dead code * 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, cpufeature: Add the RDSEED and ADX features
| * | x86, boot: Remove ancient, unconditionally #ifdef'd out dead codePaul Bolle2012-06-201-7/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Release v1.3.82 wrapped a few lines of code in an "#ifdef SAFE_RESET_DISK_CONTROLLER" and "#endif" pair. Since SAFE_RESET_DISK_CONTROLLER was never defined anywhere that was basically a verbose "#ifdef 0" and "#endif" pair. These dead lines have been in the tree for sixteen years but now the time has come to remove them. I guess the main lesson here is that if you want your dead code in the tree for a very long time you'd better be creative. A plain old "#ifdef 0" and "#endif" pair just doesn't cut it! See: http://lkml.kernel.org/r/199603301718.LAA00178@craie.inetnebr.com Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Link: http://lkml.kernel.org/r/1340230589.1773.7.camel@x61.thuisdomein Acked-by: Jeff Epler <jepler@unpythonic.net> Acked-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* | x86, efi stub: Add .reloc section back into imageJordan Justen2012-06-071-11/+31
|/ | | | | | | | | | | | | | | | | | | | | | Some UEFI firmware will not load a .efi with a .reloc section with a size of 0. Therefore, we create a .efi image with 4 main areas and 3 sections. 1. PE/COFF file header 2. .setup section (covers all setup code following the first sector) 3. .reloc section (contains 1 dummy reloc entry, created in build.c) 4. .text section (covers the remaining kernel image) To make room for the new .setup section data, the header bugger_off_msg had to be shortened. Reported-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Link: http://lkml.kernel.org/r/1339085121-12760-1-git-send-email-jordan.l.justen@intel.com Tested-by: Lee G Rosenbaum <lee.g.rosenbaum@intel.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Cc: Matt Fleming <matt.fleming@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* x86, efi: Fix NumberOfRvaAndSizes field in PE32 header for EFI_STUBMatt Fleming2012-03-261-1/+1
| | | | | | | | | | | | We've actually got six data directories in the header, not one. Even though the firmware loader doesn't seem to mind, when we come to sign the kernel image the signing tool thinks that there is no Certificate Table data directory, even though we've allocated space for one. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1332520506-6472-4-git-send-email-jordan.l.justen@intel.com Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* x86, efi: Fix .text section overlapping image header for EFI_STUBMatt Fleming2012-03-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | This change modifes the PE .text section to start after the first sector of the kernel image. The header may be modified by the UEFI secure boot signing, so it is not appropriate for it to be included in one of the image sections. Since the sections are part of the secure boot hash, this modification to the .text section contents would invalidate the secure boot signed hash. Note: UEFI secure boot does hash the image header, but fields that are changed by the signing process are excluded from the hash calculation. This exclusion process is only handled for the image header, and not image sections. Luckily, we can still easily boot without the first sector by initializing a few fields in arch/x86/boot/compressed/eboot.c. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1332520506-6472-3-git-send-email-jordan.l.justen@intel.com [jordan.l.justen@intel.com: set .text vma & file offset] Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* x86, efi: Fix issue of overlapping .reloc section for EFI_STUBJordan Justen2012-03-261-15/+7
| | | | | | | | | | | | | | | | | | | Previously the .reloc section was embedded in the .text section. No relocations are required during the PE/COFF loading phase for the kernel using the EFI_STUB UEFI loader. To fix the issue of overlapping sections, create a .reloc section with a zero length. The .reloc section header must exist to make sure the image will be loaded by the UEFI firmware, but a zero-length section header seems to be sufficient. Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Link: http://lkml.kernel.org/r/1332520506-6472-2-git-send-email-jordan.l.justen@intel.com Acked-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* x86, efi: EFI boot stub supportMatt Fleming2011-12-121-0/+158
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is currently a large divide between kernel development and the development of EFI boot loaders. The idea behind this patch is to give the kernel developers full control over the EFI boot process. As H. Peter Anvin put it, "The 'kernel carries its own stub' approach been very successful in dealing with BIOS, and would make a lot of sense to me for EFI as well." This patch introduces an EFI boot stub that allows an x86 bzImage to be loaded and executed by EFI firmware. The bzImage appears to the firmware as an EFI application. Luckily there are enough free bits within the bzImage header so that it can masquerade as an EFI application, thereby coercing the EFI firmware into loading it and jumping to its entry point. The beauty of this masquerading approach is that both BIOS and EFI boot loaders can still load and run the same bzImage, thereby allowing a single kernel image to work in any boot environment. The EFI boot stub supports multiple initrds, but they must exist on the same partition as the bzImage. Command-line arguments for the kernel can be appended after the bzImage name when run from the EFI shell, e.g. Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img v7: - Fix checkpatch warnings. v6: - Try to allocate initrd memory just below hdr->inird_addr_max. v5: - load_options_size is UTF-16, which needs dividing by 2 to convert to the corresponding ASCII size. v4: - Don't read more than image->load_options_size v3: - Fix following warnings when compiling CONFIG_EFI_STUB=n arch/x86/boot/tools/build.c: In function ‘main’: arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’ arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’ - As reported by Matthew Garrett, some Apple machines have GOPs that don't have hardware attached. We need to weed these out by searching for ones that handle the PCIIO protocol. - Don't allocate memory if no initrds are on cmdline - Don't trust image->load_options_size Maarten Lankhorst noted: - Don't strip first argument when booted from efibootmgr - Don't allocate too much memory for cmdline - Don't update cmdline_size, the kernel considers it read-only - Don't accept '\n' for initrd names v2: - File alignment was too large, was 8192 should be 512. Reported by Maarten Lankhorst on LKML. - Added UGA support for graphics - Use VIDEO_TYPE_EFI instead of hard-coded number. - Move linelength assignment until after we've assigned depth - Dynamically fill out AddressOfEntryPoint in tools/build.c - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen - The bzImage may need to be relocated as it may have been loaded at a high address address by the firmware. This was required to get my macbook booting because the firmware loaded it at 0x7cxxxxxx, which triggers this error in decompress_kernel(), if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); Cc: Mike Waychison <mikew@google.com> Cc: Matthew Garrett <mjg@redhat.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* doc: fix broken referencesPaul Bolle2011-09-271-1/+1
| | | | | | | | | | | | | There are numerous broken references to Documentation files (in other Documentation files, in comments, etc.). These broken references are caused by typo's in the references, and by renames or removals of the Documentation files. Some broken references are simply odd. Fix these broken references, sometimes by dropping the irrelevant text they were part of. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* kbuild: move utsrelease.h to include/generatedSam Ravnborg2009-12-121-1/+1
| | | | | | | Fix up all users of utsrelease.h Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
View Lorry Controller Status