summaryrefslogtreecommitdiff
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
...
* ibm_newemac: Workaround reset timeout when no linkBenjamin Herrenschmidt2007-12-071-6/+14
| | | | | | | | | | | | | | | | With some PHYs, when the link goes away, the EMAC reset fails due to the loss of the RX clock I believe. The old EMAC driver worked around that using some internal chip-specific clock force bits that are different on various 44x implementations. This is an attempt at doing it differently, by avoiding the reset when there is no link, but forcing loopback mode instead. It seems to work on my Taishan 440GX based board so far. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ibm_newemac: Fix ZMII refcounting bugBenjamin Herrenschmidt2007-12-071-1/+3
| | | | | | | | | | When using ZMII for MDIO only (such as 440GX with RGMII for data and ZMII for MDIO), the ZMII code would fail to properly refcount, thus triggering a BUG_ON(). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ibm_newemac: Add ET1011c PHY supportStefan Roese2007-12-071-0/+37
| | | | | | | | | This adds support for the Agere ET1011c PHY as found on the AMCC Taishan board. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ibm_newemac: Add BCM5248 and Marvell 88E1111 PHY supportStefan Roese2007-12-071-0/+39
| | | | | | | | | | | This patch adds BCM5248 and Marvell 88E1111 PHY support to NEW EMAC driver. These PHY chips are used on PowerPC 440EPx boards. The PHY code is based on the previous work by Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* e100: cleanup unneeded mathAuke Kok2007-12-071-4/+2
| | | | | | | | | No need to convert to bytes and back - cleanup unneeded code. Adapted from fix from 'Roel Kluin <12o3l@tiscali.nl>' Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* e1000: fix memcpy in e1000_get_stringsRoel Kluin2007-12-072-2/+2
| | | | | | | | | | | | | | | | | | drivers/net/e1000/e1000_ethtool.c:113: #define E1000_TEST_LEN sizeof(e1000_gstrings_test) / ETH_GSTRING_LEN drivers/net/e1000e/ethtool.c:106: #define E1000_TEST_LEN sizeof(e1000_gstrings_test) / ETH_GSTRING_LEN E1000_TEST_LEN*ETH_GSTRING_LEN will expand to sizeof(e1000_gstrings_test) / (ETH_GSTRING_LEN * ETH_GSTRING_LEN) A lack of parentheses around defines causes unexpected results due to operator precedences. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* make bnx2x select ZLIB_INFLATEEliezer Tamir2007-12-071-0/+1
| | | | | | | | | | | | | The bnx2x module depends on the zlib_inflate functions. The build will fail if ZLIB_INFLATE has not been selected manually or by building another module that automatically selects it. Modify BNX2X config option to 'select ZLIB_INFLATE' like BNX2 and others. This seems to fix it. Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* cxgb3 - T3C support updateDivy Le Ray2007-12-073-19/+58
| | | | | | | | | Update GPIO mapping for T3C. Update xgmac for T3C support. Fix typo in mtu table. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* bonding: Fix race at module unloadJay Vosburgh2007-12-072-22/+23
| | | | | | | | | | | Fixes a race condition in module unload. Without this change, workqueue events may fire while bonding data structures are partially freed but before bond_close() is invoked by unregister_netdevice(). Update version to 3.2.3. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* bonding: Add new layer2+3 hash for xor/802.3ad modesJay Vosburgh2007-12-072-12/+40
| | | | | | | | | | | | | | | | | | | | | | | Add new hash for balance-xor and 802.3ad modes. Originally submitted by "Glenn Griffin" <ggriffin.kernel@gmail.com>; modified by Jay Vosburgh to move setting of hash policy out of line, tweak the documentation update and add version update to 3.2.2. Glenn's original comment follows: Included is a patch for a new xmit_hash_policy for the bonding driver that selects slaves based on MAC and IP information. This is a middle ground between what currently exists in the layer2 only policy and the layer3+4 policy. This policy strives to be fully 802.3ad compliant by transmitting every packet of any particular flow over the same link. As documented the layer3+4 policy is not fully compliant for extreme cases such as ip fragmentation, so this policy is a nice compromise for environments that require full compliance but desire more than the layer2 only policy. Signed-off-by: "Glenn Griffin" <ggriffin.kernel@gmail.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* bonding: Fix time comparisonDavid Sterba2007-12-071-12/+13
| | | | | | | | | | | From: David Sterba <dsterba@suse.cz> Use macros for comparing jiffies. Jiffies' wrap caused missed events and hangs. Module reinsert was needed to make bonding work again. Signed-off-by: David Sterba <dsterba@suse.cz> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* bonding: Allow setting and querying xmit policy regardless of modeWagner Ferenc2007-12-071-18/+3
| | | | | | | | | | | | From: Wagner Ferenc <wferi@niif.hu> For consistency with the behaviour of the arp_ip_target option, let /sys/class/net/bond0/bonding/xmit_hash_policy accept and report current policy even if the bonding mode in effect does not use it. Signed-off-by: Ferenc Wagner <wferi@niif.hu> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* bonding: Coding style: break line after the if conditionWagner Ferenc2007-12-071-3/+6
| | | | | | | | | | From: Wagner Ferenc <wferi@niif.hu> Adhere to coding style: break line after the if condition Signed-off-by: Ferenc Wagner <wferi@niif.hu> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* bonding: Purely cosmetic: rename a local variableWagner Ferenc2007-12-071-5/+4
| | | | | | | | | | | | From: Wagner Ferenc <wferi@niif.hu> Code for rendering multivalue sysfs files occurs three times in this module. Rename 'buffer' to 'buf' in the first, for the sake of consistency. Signed-off-by: Ferenc Wagner <wferi@niif.hu> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* bonding: Return nothing for not applicable valuesWagner Ferenc2007-12-071-21/+4
| | | | | | | | | | | | | | | | From: Wagner Ferenc <wferi@niif.hu> The previous code returned '\n' (that is, a single empty line) from most files, with one exception (xmit_hash_policy), where it returned 'NA\n'. This patch consolidates each file to return nothing at all if not applicable, not even a '\n'. I find this behaviour more usual, more useful, more efficient and shorter to code from both sides. Signed-off-by: Ferenc Wagner <wferi@niif.hu> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* bonding: Remove trailing NULs from sysfs interface.Wagner Ferenc2007-12-071-36/+30
| | | | | | | | | | | | | | | | | | | | | | | From: Wagner Ferenc <wferi@niif.hu> Also remove trailing spaces from multivalued files. This fixes output like for example: $ od -c /sys/class/net/bond0/bonding/slaves 0000000 e t h - l e f t e t h - r i g 0000020 h t \n \0 0000025 It mostly entails deleting '+1'-s after sprintf() calls: the return value of sprintf is the number of characters printed, without the closing NUL, ie. exactly what the sysfs interface requires. The three multivalue cases are different, because they also have to swallow back a trailing space. Signed-off-by: Ferenc Wagner <wferi@niif.hu> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [NIU]: Fix link LED handling.Mirko Lindner2007-12-071-4/+18
| | | | | | | | The LED in the current driver will not be controlled correctly. During a link change the carrier of the link is not available and the LED will never turn on. Signed-off-by: David S. Miller <davem@davemloft.net>
* [LRO]: fix lro_gen_skb() alignmentAndrew Gallatin2007-12-051-0/+1
| | | | | | | | | | | | | Add a field to the lro_mgr struct so that drivers can specify how much padding is required to align layer 3 headers when a packet is copied into a freshly allocated skb by inet_lro.c:lro_gen_skb(). Without padding, skbs generated by LRO will cause alignment warnings on architectures which require strict alignment (seen on sparc64). Myri10GE is updated to use this field. Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* PHY: Add the phy_device_release device method.Anton Vorontsov2007-12-042-4/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Lately I've got this nice badness on mdio bus removal: Device 'e0103120:06' does not have a release() function, it is broken and must be fixed. ------------[ cut here ]------------ Badness at drivers/base/core.c:107 NIP: c015c1a8 LR: c015c1a8 CTR: c0157488 REGS: c34bdcf0 TRAP: 0700 Not tainted (2.6.23-rc5-g9ebadfbb-dirty) MSR: 00029032 <EE,ME,IR,DR> CR: 24088422 XER: 00000000 ... [c34bdda0] [c015c1a8] device_release+0x78/0x80 (unreliable) [c34bddb0] [c01354cc] kobject_cleanup+0x80/0xbc [c34bddd0] [c01365f0] kref_put+0x54/0x6c [c34bdde0] [c013543c] kobject_put+0x24/0x34 [c34bddf0] [c015c384] put_device+0x1c/0x2c [c34bde00] [c0180e84] mdiobus_unregister+0x2c/0x58 ... Though actually there is nothing broken, it just device subsystem core expects another "pattern" of resource managment. This patch implement phy device's release function, thus we're getting rid of this badness. Also small hidden bug fixed, hope none other introduced. ;-) Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* gianfar: fix compile warningGrant Likely2007-12-041-1/+1
| | | | | | | | | | Eliminate an uninitialized variable warning. The code is correct, but a pointer to the automatic variable 'addr' is passed to dma_alloc_coherent. Since addr has never been initialized, and the compiler doesn't know what dma_alloc_coherent will do with it, it complains. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pasemi_mac: Fix reuse of free'd skbOlof Johansson2007-12-041-1/+1
| | | | | | | | | | | | | Turns out we're freeing the skb when we detect CRC error, but we're not clearing out info->skb. We could either clear it and have the stack reallocate it, or just leave it and the rx ring refill code will reuse the one that was allocated. Reusing a freed skb obviously caused some nasty crashes of various kind, as reported by Brent Baude and David Woodhouse. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* SMC911X: Fix using of dereferenced skb after netif_rxWang Chen2007-12-041-1/+1
| | | | | Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sky2: recovery deadlock fixStephen Hemminger2007-12-041-4/+2
| | | | | | | | | | | | Prevent deadlock in sky2 recovery logic. sky2_down calls napi_synchronize which gets stuck if napi was already disabled. Fix by rearranging slightly and not calling napi_disable until after both ports are stopped. The napi_disable probably is being overly paranoid, but it is safe now. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Fix memory corruption in fec_mpc52xxJon Smirl2007-12-041-2/+2
| | | | | | | | | | | The mpc5200 fec driver is corrupting memory. This patch fixes two bugs where the wrong skb was being referenced. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Don't claim to do IPv6 checksum offloadDavid Woodhouse2007-12-041-1/+1
| | | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* cxgb - revert file mode changes.Divy Le Ray2007-12-044-0/+0
| | | | | | | revert inavertant file mode changes Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/net-2.6Linus Torvalds2007-12-031-6/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/net-2.6: (27 commits) [INET]: Fix inet_diag dead-lock regression [NETNS]: Fix /proc/net breakage [TEXTSEARCH]: Do not allow zero length patterns in the textsearch infrastructure [NETFILTER]: fix forgotten module release in xt_CONNMARK and xt_CONNSECMARK [NETFILTER]: xt_TCPMSS: remove network triggerable WARN_ON [DECNET]: dn_nl_deladdr() almost always returns no error [IPV6]: Restore IPv6 when MTU is big enough [RXRPC]: Add missing select on CRYPTO mac80211: rate limit wep decrypt failed messages rfkill: fix double-mutex-locking mac80211: drop unencrypted frames if encryption is expected mac80211: Fix behavior of ieee80211_open and ieee80211_close ieee80211: fix unaligned access in ieee80211_copy_snap mac80211: free ifsta->extra_ie and clear IEEE80211_STA_PRIVACY_INVOKED SCTP: Fix build issues with SCTP AUTH. SCTP: Fix chunk acceptance when no authenticated chunks were listed. SCTP: Fix the supported extensions paramter SCTP: Fix SCTP-AUTH to correctly add HMACS paramter. SCTP: Fix the number of HB transmissions. [TCP] illinois: Incorrect beta usage ...
| * [SUNGEM]: Fix NAPI regression with reset workJohannes Berg2007-11-291-6/+5
| | | | | | | | | | | | | | | | | | | | | | sungem's gem_reset_task() will unconditionally try to disable NAPI even when it's called while the interface is not operating and hence the NAPI struct isn't enabled. Make napi_disable() depend on gp->running. Also removes a superfluous test of gp->running in the same function. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | LIB82596: correct data types for hardware addressesThomas Bogendoerfer2007-12-011-25/+25
| | | | | | | | | | | | | | | | dma_addr_t is 64bit wide on some architectures (for example 64bit MIPS), so it's not a good idea to use it for 32bit wide addresses in descriptors. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | via-velocity: don't oops on MTU change (resend)Stephen Hemminger2007-12-011-8/+3
| | | | | | | | | | | | | | | | | | | | The VIA veloicty driver needs the following to allow changing MTU when down. The buffer size needs to be computed when device is brought up, not when device is initialized. This also fixes a bug where the buffer size was computed differently on change_mtu versus initial setting. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | Stop phy code from returning success to unknown ioctls.David Woodhouse2007-12-011-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This kind of sucks, and prevents the Fedora installer from using the device for network installs... [root@efika phy]# iwconfig eth0 Warning: Driver for device eth0 has been compiled with an ancient version of Wireless Extension, while this program support version 11 and later. Some things may be broken... eth0 ESSID:off/any Nickname:"" NWID:0 Channel:0 Access Point: 00:00:BF:81:14:E0 Bit Rate:-1.08206e+06 kb/s Sensitivity=0/0 RTS thr:off Fragment thr:off Encryption key:<too big> Power Management:off Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | SET_NETDEV_DEV() in fec_mpc52xx.cDavid Woodhouse2007-12-011-0/+2
| | | | | | | | | | | | | | | | This helps to allow the Fedora installer to use the built-in Ethernet on the Efika for a network install. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | net: smc911x: only enable for mpr2 on sh.Paul Mundt2007-12-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The smc911x.h is a bit of a mess, not supporting any sort of generic configuration. For the moment only ARCH_PXA and SH_MAGIC_PANEL_R2 have suitable definitions, so we reflect this in the Kconfig also. While there are other SH boards that will likely turn this on in the 2.6.25 time frame, it's not worth trying to stub around at the moment. Fixes up the allmodconfig build, as noted by akpm. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | e1000: Fix NAPI state bug when Rx completeAuke Kok2007-12-011-1/+1
| | | | | | | | | | | | | | | | Don't exit polling when we have not yet used our budget, this causes the NAPI system to end up with a messed up poll list. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | sky2: turn of dynamic Tx watermark workaround (FE+ only)Stephen Hemminger2007-12-011-0/+7
| | | | | | | | | | | | | | | | | | Add workaround for issues FE+ (A0) transmit watermark. This is copied verbatim from vendor driver sk98lin (10.22.4.3). Don't have that chip version and no more information seems to be available. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | sky2: don't use AER routinesStephen Hemminger2007-12-011-30/+7
| | | | | | | | | | | | | | | | | | | | | | | | Using PCIE advanced error recovery stuff creates more user problems than it's worth. The AER stuff depends on MMCONFIG and in many configurations it just doesn't work. Plus it doesn't add any real functionality to the driver. The sky2 driver handles its own errors fine as is. This reverts 555382cbfc6d2187b53888190755e56f52308cd6 Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | sky2: revert to access PCI config via device spaceStephen Hemminger2007-12-012-38/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | Using the hardware window into PCI config space is more reliable and smaller/faster than using the pci_config routines. It avoids issues with MMCONFIG etc. Reverts: 167f53d05fccb47b6eeadac7f6705b3f2f042d03 Please apply for 2.6.24 Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | cxgb - fix statsDivy Le Ray2007-12-014-89/+96
| | | | | | | | | | | | | | | | Fix MAC stats accounting. Fix get_stats. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | cxgb - fix NAPIDivy Le Ray2007-12-011-4/+2
| | | | | | | | | | | | | | | | netif_rx_complete() should be called only when work_done < budget. Signed-off-by: Divy Le ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | cxgb - fix T2 GSODivy Le Ray2007-12-013-20/+18
| | | | | | | | | | | | | | | | The patch ensures that a GSO skb has enough headroom to push an encapsulating cpl_tx_pkt_lso header. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | ucc_geth: handle passing of RX-only and TX-only internal delay PHY ↵Kim Phillips2007-12-011-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | connection type parameters Extend the RGMII-Internal Delay specification case to include TX-only and RX-only variants. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Tested-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | phylib: marvell: add support for TX-only and RX-only Internal DelayKim Phillips2007-12-011-9/+17
| | | | | | | | | | | | | | | | | | | | | | Previously, Internal Delay specification implied the delay be applied to both TX and RX. This patch allows for separate TX/RX-only internal delay specification. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Tested-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | skge: MTU changing fixStephen Hemminger2007-12-011-33/+2
| | | | | | | | | | | | | | | | | | | | The code to change MTU doesn't correctly handle all the chip variations and requirements for restarting. On Genesis chips changing MTU would just cause receiver to hang. Use a simpler approach of just taking link down/up if needed. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | skge: serial mode register valuesStephen Hemminger2007-12-011-3/+6
| | | | | | | | | | | | | | | | For compatiablity with sk98lin, make sure and set same values in serial mode register. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | skge version 1.13Stephen Hemminger2007-12-011-1/+1
| | | | | | | | | | | | | | Version for 2.6.24 Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | skge: increase TX threshold for JumboStephen Hemminger2007-12-011-6/+5
| | | | | | | | | | | | | | | | Need to increase TX threshold when doing Jumbo frames on dual port board to avoid underruns. (Code from sk98lin). Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | skge: fiber link up/down fixStephen Hemminger2007-12-011-7/+12
| | | | | | | | | | | | | | | | | | | | | | The driver would not work over fibre if other end when down then came back up (would require reloading driver). The correct way to manage the link the same way for both TP and fibre. Resloves problem described in: http://lkml.org/lkml/2007/11/6/395 Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | skge: retry on MAC shutdownStephen Hemminger2007-12-011-11/+8
| | | | | | | | | | | | | | | | Make sure and retry when shutting down the MAC. This code is copied from sk98lin driver. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | skge: receive flush logicStephen Hemminger2007-12-011-7/+2
| | | | | | | | | | | | | | | | Receive FIFO overrun is not catastrophic condition, so don't flush when it happens. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | skge: FIFO Ram calculation errorStephen Hemminger2007-12-011-2/+2
| | | | | | | | | | | | | | | | | | | | The calculation of usable FIFO RAM is wrong in the skge driver. First, is doesn't take into account the reserved area on the original SysKonnect Genesis boards. Second it has an off-by-one error because hw->ports is either 1 or 2. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
View Lorry Controller Status