summaryrefslogtreecommitdiff
path: root/drivers/usb/misc
Commit message (Collapse)AuthorAgeFilesLines
* USB: ldusb: fix read info leaksJohan Hovold2019-10-181-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | Fix broken read implementation, which could be used to trigger slab info leaks. The driver failed to check if the custom ring buffer was still empty when waking up after having waited for more data. This would happen on every interrupt-in completion, even if no data had been added to the ring buffer (e.g. on disconnect events). Due to missing sanity checks and uninitialised (kmalloced) ring-buffer entries, this meant that huge slab info leaks could easily be triggered. Note that the empty-buffer check after wakeup is enough to fix the info leak on disconnect, but let's clear the buffer on allocation and add a sanity check to read() to prevent further leaks. Fixes: 2824bd250f0b ("[PATCH] USB: add ldusb driver") Cc: stable <stable@vger.kernel.org> # 2.6.13 Reported-by: syzbot+6fe95b826644f7f12b0b@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191018151955.25135-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: legousbtower: fix a signedness bug in tower_probe()Dan Carpenter2019-10-151-1/+1
| | | | | | | | | | | | The problem is that sizeof() is unsigned long so negative error codes are type promoted to high positive values and the condition becomes false. Fixes: 1d427be4a39d ("USB: legousbtower: fix slab info leak at probe") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191011141115.GA4521@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: legousbtower: fix memleak on disconnectJohan Hovold2019-10-151-4/+1
| | | | | | | | | | | | If disconnect() races with release() after a process has been interrupted, release() could end up returning early and the driver would fail to free its driver data. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191010125835.27031-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ldusb: fix memleak on disconnectJohan Hovold2019-10-151-4/+1
| | | | | | | | | | | | If disconnect() races with release() after a process has been interrupted, release() could end up returning early and the driver would fail to free its driver data. Fixes: 2824bd250f0b ("[PATCH] USB: add ldusb driver") Cc: stable <stable@vger.kernel.org> # 2.6.13 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191010125835.27031-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: yurex: fix NULL-derefs on disconnectJohan Hovold2019-10-101-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | The driver was using its struct usb_interface pointer as an inverted disconnected flag, but was setting it to NULL without making sure all code paths that used it were done with it. Before commit ef61eb43ada6 ("USB: yurex: Fix protection fault after device removal") this included the interrupt-in completion handler, but there are further accesses in dev_err and dev_dbg statements in yurex_write() and the driver-data destructor (sic!). Fix this by unconditionally stopping also the control URB at disconnect and by using a dedicated disconnected flag. Note that we need to take a reference to the struct usb_interface to avoid a use-after-free in the destructor whenever the device was disconnected while the character device was still open. Fixes: aadd6472d904 ("USB: yurex.c: remove dbg() usage") Fixes: 45714104b9e8 ("USB: yurex.c: remove err() usage") Cc: stable <stable@vger.kernel.org> # 3.5: ef61eb43ada6 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009153848.8664-6-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: iowarrior: use pr_err()Johan Hovold2019-10-101-1/+1
| | | | | | | | Replace the one remaining printk with pr_err(). Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009104846.5925-7-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: iowarrior: drop redundant iowarrior mutexJohan Hovold2019-10-101-12/+1
| | | | | | | | | | | | | Drop the redundant iowarrior mutex introduced by commit 925ce689bb31 ("USB: autoconvert trivial BKL users to private mutex") which replaced an earlier BKL use. The lock serialised calls to open() against other open() and ioctl(), but neither is needed. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009104846.5925-6-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: iowarrior: drop redundant disconnect mutexJohan Hovold2019-10-101-15/+2
| | | | | | | | | | | | | | | Drop the redundant disconnect mutex which was introduced after the open-disconnect race had been addressed generally in USB core by commit d4ead16f50f9 ("USB: prevent char device open/deregister race"). Specifically, the rw-semaphore in core guarantees that all calls to open() will have completed and that no new calls to open() will occur after usb_deregister_dev() returns. Hence there is no need use the driver data as an inverted disconnected flag. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009104846.5925-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: iowarrior: fix use-after-free after driver unbindJohan Hovold2019-10-101-0/+6
| | | | | | | | | | | Make sure to stop also the asynchronous write URBs on disconnect() to avoid use-after-free in the completion handler after driver unbind. Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.") Cc: stable <stable@vger.kernel.org> # 2.6.21: 51a2f077c44e ("USB: introduce usb_anchor") Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009104846.5925-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: iowarrior: fix use-after-free on releaseJohan Hovold2019-10-101-1/+2
| | | | | | | | | | | | | The driver was accessing its struct usb_interface from its release() callback without holding a reference. This would lead to a use-after-free whenever debugging was enabled and the device was disconnected while its character device was open. Fixes: 549e83500b80 ("USB: iowarrior: Convert local dbg macro to dev_dbg") Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009104846.5925-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: iowarrior: fix use-after-free on disconnectJohan Hovold2019-10-101-4/+3
| | | | | | | | | | | | | | | | | | | | A recent fix addressing a deadlock on disconnect introduced a new bug by moving the present flag out of the critical section protected by the driver-data mutex. This could lead to a racing release() freeing the driver data before disconnect() is done with it. Due to insufficient locking a related use-after-free could be triggered also before the above mentioned commit. Specifically, the driver needs to hold the driver-data mutex also while checking the opened flag at disconnect(). Fixes: c468a8aa790e ("usb: iowarrior: fix deadlock on disconnect") Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.") Cc: stable <stable@vger.kernel.org> # 2.6.21 Reported-by: syzbot+0761012cebf7bdb38137@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009104846.5925-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: chaoskey: fix use-after-free on releaseJohan Hovold2019-10-101-2/+3
| | | | | | | | | | | | | The driver was accessing its struct usb_interface in its release() callback without holding a reference. This would lead to a use-after-free whenever the device was disconnected while the character device was still open. Fixes: 66e3e591891d ("usb: Add driver for Altus Metrum ChaosKey device (v2)") Cc: stable <stable@vger.kernel.org> # 4.1 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009153848.8664-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: adutux: fix use-after-free on releaseJohan Hovold2019-10-101-1/+2
| | | | | | | | | | | | | The driver was accessing its struct usb_device in its release() callback without holding a reference. This would lead to a use-after-free whenever the device was disconnected while the character device was still open. Fixes: 66d4bc30d128 ("USB: adutux: remove custom debug macro") Cc: stable <stable@vger.kernel.org> # 3.12 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009153848.8664-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ldusb: fix NULL-derefs on driver unbindJohan Hovold2019-10-101-12/+12
| | | | | | | | | | | | | | | | | | | | | The driver was using its struct usb_interface pointer as an inverted disconnected flag, but was setting it to NULL before making sure all completion handlers had run. This could lead to a NULL-pointer dereference in a number of dev_dbg, dev_warn and dev_err statements in the completion handlers which relies on said pointer. Fix this by unconditionally stopping all I/O and preventing resubmissions by poisoning the interrupt URBs at disconnect and using a dedicated disconnected flag. This also makes sure that all I/O has completed by the time the disconnect callback returns. Fixes: 2824bd250f0b ("[PATCH] USB: add ldusb driver") Cc: stable <stable@vger.kernel.org> # 2.6.13 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009153848.8664-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: legousbtower: fix use-after-free on releaseJohan Hovold2019-10-101-1/+2
| | | | | | | | | | | | | The driver was accessing its struct usb_device in its release() callback without holding a reference. This would lead to a use-after-free whenever the device was disconnected while the character device was still open. Fixes: fef526cae700 ("USB: legousbtower: remove custom debug macro") Cc: stable <stable@vger.kernel.org> # 3.12 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009153848.8664-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: legousbtower: fix open after failed reset requestJohan Hovold2019-10-041-2/+2
| | | | | | | | | | | | | | The driver would return with a nonzero open count in case the reset control request failed. This would prevent any further attempts to open the char dev until the device was disconnected. Fix this by incrementing the open count only on successful open. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190919083039.30898-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: legousbtower: fix potential NULL-deref on disconnectJohan Hovold2019-10-041-11/+15
| | | | | | | | | | | | | | | | | | | | | | | The driver is using its struct usb_device pointer as an inverted disconnected flag, but was setting it to NULL before making sure all completion handlers had run. This could lead to a NULL-pointer dereference in a number of dev_dbg and dev_err statements in the completion handlers which relies on said pointer. Fix this by unconditionally stopping all I/O and preventing resubmissions by poisoning the interrupt URBs at disconnect and using a dedicated disconnected flag. This also makes sure that all I/O has completed by the time the disconnect callback returns. Fixes: 9d974b2a06e3 ("USB: legousbtower.c: remove err() usage") Fixes: fef526cae700 ("USB: legousbtower: remove custom debug macro") Fixes: 4dae99638097 ("USB: legotower: remove custom debug macro and module parameter") Cc: stable <stable@vger.kernel.org> # 3.5 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20190919083039.30898-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: legousbtower: fix deadlock on disconnectJohan Hovold2019-10-041-17/+2
| | | | | | | | | | | | | | | | | | | | | | | Fix a potential deadlock if disconnect races with open. Since commit d4ead16f50f9 ("USB: prevent char device open/deregister race") core holds an rw-semaphore while open is called and when releasing the minor number during deregistration. This can lead to an ABBA deadlock if a driver takes a lock in open which it also holds during deregistration. This effectively reverts commit 78663ecc344b ("USB: disconnect open race in legousbtower") which needlessly introduced this issue after a generic fix for this race had been added to core by commit d4ead16f50f9 ("USB: prevent char device open/deregister race"). Fixes: 78663ecc344b ("USB: disconnect open race in legousbtower") Cc: stable <stable@vger.kernel.org> # 2.6.24 Reported-by: syzbot+f9549f5ee8a5416f0b95@syzkaller.appspotmail.com Tested-by: syzbot+f9549f5ee8a5416f0b95@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20190919083039.30898-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: legousbtower: fix slab info leak at probeJohan Hovold2019-10-041-2/+4
| | | | | | | | | | | | Make sure to check for short transfers when retrieving the version information at probe to avoid leaking uninitialised slab data when logging it. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20190919083039.30898-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usblcd: use pr_err()Johan Hovold2019-10-041-1/+1
| | | | | | | | Replace the one remaining printk with pr_err(). Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20190926091228.24634-10-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usblcd: drop redundant lcd mutexJohan Hovold2019-10-041-7/+0
| | | | | | | | | | | | | Drop the redundant lcd mutex introduced by commit 925ce689bb31 ("USB: autoconvert trivial BKL users to private mutex") which replaced an earlier BKL use. The lock serialised calls to open() against other open() and a custom ioctl() returning the bcdDevice (sic!), but neither is needed. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20190926091228.24634-9-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usblcd: drop redundant disconnect mutexJohan Hovold2019-10-041-17/+1
| | | | | | | | | | | | | | | Drop the redundant disconnect mutex which was introduced after the open-disconnect race had been addressed generally in USB core by commit d4ead16f50f9 ("USB: prevent char device open/deregister race"). Specifically, the rw-semaphore in core guarantees that all calls to open() will have completed and that no new calls to open() will occur after usb_deregister_dev() returns. Hence there is no need use the driver data as an inverted disconnected flag. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20190926091228.24634-8-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usblcd: fix I/O after disconnectJohan Hovold2019-10-041-2/+31
| | | | | | | | | | | | | | | Make sure to stop all I/O on disconnect by adding a disconnected flag which is used to prevent new I/O from being started and by stopping all ongoing I/O before returning. This also fixes a potential use-after-free on driver unbind in case the driver data is freed before the completion handler has run. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> # 7bbe990c989e Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20190926091228.24634-7-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: yurex: Don't retry on unexpected errorsAlan Stern2019-10-041-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | According to Greg KH, it has been generally agreed that when a USB driver encounters an unknown error (or one it can't handle directly), it should just give up instead of going into a potentially infinite retry loop. The three codes -EPROTO, -EILSEQ, and -ETIME fall into this category. They can be caused by bus errors such as packet loss or corruption, attempting to communicate with a disconnected device, or by malicious firmware. Nowadays the extent of packet loss or corruption is negligible, so it should be safe for a driver to give up whenever one of these errors occurs. Although the yurex driver handles -EILSEQ errors in this way, it doesn't do the same for -EPROTO (as discovered by the syzbot fuzzer) or other unrecognized errors. This patch adjusts the driver so that it doesn't log an error message for -EPROTO or -ETIME, and it doesn't retry after any errors. Reported-and-tested-by: syzbot+b24d736f18a1541ad550@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1909171245410.1590-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: adutux: fix NULL-derefs on disconnectJohan Hovold2019-10-041-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | The driver was using its struct usb_device pointer as an inverted disconnected flag, but was setting it to NULL before making sure all completion handlers had run. This could lead to a NULL-pointer dereference in a number of dev_dbg statements in the completion handlers which relies on said pointer. The pointer was also dereferenced unconditionally in a dev_dbg statement release() something which would lead to a NULL-deref whenever a device was disconnected before the final character-device close if debugging was enabled. Fix this by unconditionally stopping all I/O and preventing resubmissions by poisoning the interrupt URBs at disconnect and using a dedicated disconnected flag. This also makes sure that all I/O has completed by the time the disconnect callback returns. Fixes: 1ef37c6047fe ("USB: adutux: remove custom debug macro and module parameter") Fixes: 66d4bc30d128 ("USB: adutux: remove custom debug macro") Cc: stable <stable@vger.kernel.org> # 3.12 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20190925092913.8608-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: adutux: fix use-after-free on disconnectJohan Hovold2019-10-041-3/+4
| | | | | | | | | | | | | | | | | | | | The driver was clearing its struct usb_device pointer, which it used as an inverted disconnected flag, before deregistering the character device and without serialising against racing release(). This could lead to a use-after-free if a racing release() callback observes the cleared pointer and frees the driver data before disconnect() is finished with it. This could also lead to NULL-pointer dereferences in a racing open(). Fixes: f08812d5eb8f ("USB: FIx locks and urb->status in adutux (updated)") Cc: stable <stable@vger.kernel.org> # 2.6.24 Reported-by: syzbot+0243cb250a51eeefb8cc@syzkaller.appspotmail.com Tested-by: syzbot+0243cb250a51eeefb8cc@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20190925092913.8608-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: rio500: Remove Rio 500 kernel driverBastien Nocera2019-10-044-585/+0
| | | | | | | | | | | | | | | | The Rio500 kernel driver has not been used by Rio500 owners since 2001 not long after the rio500 project added support for a user-space USB stack through the very first versions of usbdevfs and then libusb. Support for the kernel driver was removed from the upstream utilities in 2008: https://gitlab.freedesktop.org/hadess/rio500/commit/943f624ab721eb8281c287650fcc9e2026f6f5db Cc: Cesar Miquel <miquel@df.uba.ar> Signed-off-by: Bastien Nocera <hadess@hadess.net> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/6251c17584d220472ce882a3d9c199c401a51a71.camel@hadess.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: rio500: Fix lockdep violationAlan Stern2019-09-031-31/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The syzbot fuzzer found a lockdep violation in the rio500 driver: ====================================================== WARNING: possible circular locking dependency detected 5.3.0-rc2+ #23 Not tainted ------------------------------------------------------ syz-executor.2/20386 is trying to acquire lock: 00000000772249c6 (rio500_mutex){+.+.}, at: open_rio+0x16/0xc0 drivers/usb/misc/rio500.c:64 but task is already holding lock: 00000000d3e8f4b9 (minor_rwsem){++++}, at: usb_open+0x23/0x270 drivers/usb/core/file.c:39 which lock already depends on the new lock. The problem is that the driver's open_rio() routine is called while the usbcore's minor_rwsem is locked for reading, and it acquires the rio500_mutex; whereas conversely, probe_rio() and disconnect_rio() first acquire the rio500_mutex and then call usb_register_dev() or usb_deregister_dev(), which lock minor_rwsem for writing. The correct ordering of acquisition should be: minor_rwsem first, then rio500_mutex (since the locking in open_rio() cannot be changed). Thus, the probe and disconnect routines should avoid holding rio500_mutex while doing their registration and deregistration. This patch adjusts the code in those two routines to do just that. It also relies on the fact that the probe and disconnect routines are protected by the device mutex, so the initial test of rio->present needs no extra locking. Reported-by: syzbot+7bbcbe9c9ff0cd49592a@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: d710734b0677 ("USB: rio500: simplify locking") Acked-by: Oliver Neukum <oneukum@suse.com> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1908081329240.1319-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: rio500: simplify lockingOliver Neukum2019-09-031-27/+16
| | | | | | | | Admitting that there can be only one device allows us to drop any pretense about locking one device or a table of devices. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 5.3-rc4 into usb-nextGreg Kroah-Hartman2019-08-123-20/+32
|\ | | | | | | | | | | We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: iowarrior: fix deadlock on disconnectOliver Neukum2019-08-081-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | We have to drop the mutex before we close() upon disconnect() as close() needs the lock. This is safe to do by dropping the mutex as intfdata is already set to NULL, so open() will fail. Fixes: 03f36e885fc26 ("USB: open disconnect race in iowarrior") Reported-by: syzbot+a64a382964bf6c71a9c0@syzkaller.appspotmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20190808092728.23417-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Revert "USB: rio500: simplify locking"Oliver Neukum2019-08-081-16/+27
| | | | | | | | | | | | | | | | | | | | | | | | This reverts commit d710734b06770814de2bfa2819420fb5df7f3a81. This simplification causes a deadlock. Reported-by: syzbot+7bbcbe9c9ff0cd49592a@syzkaller.appspotmail.com Fixes: d710734b0677 ("USB: rio500: simplify locking") Cc: stable <stable@vger.kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20190808092854.23519-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: yurex: Fix use-after-free in yurex_deleteSuzuki K Poulose2019-08-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | syzbot reported the following crash [0]: BUG: KASAN: use-after-free in usb_free_coherent+0x79/0x80 drivers/usb/core/usb.c:928 Read of size 8 at addr ffff8881b18599c8 by task syz-executor.4/16007 CPU: 0 PID: 16007 Comm: syz-executor.4 Not tainted 5.3.0-rc2+ #23 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x6a/0x32c mm/kasan/report.c:351 __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482 kasan_report+0xe/0x12 mm/kasan/common.c:612 usb_free_coherent+0x79/0x80 drivers/usb/core/usb.c:928 yurex_delete+0x138/0x330 drivers/usb/misc/yurex.c:100 kref_put include/linux/kref.h:65 [inline] yurex_release+0x66/0x90 drivers/usb/misc/yurex.c:392 __fput+0x2d7/0x840 fs/file_table.c:280 task_work_run+0x13f/0x1c0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_usermode_loop+0x1d2/0x200 arch/x86/entry/common.c:163 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath arch/x86/entry/common.c:274 [inline] do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x413511 Code: 75 14 b8 03 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 04 1b 00 00 c3 48 83 ec 08 e8 0a fc ff ff 48 89 04 24 b8 03 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 53 fc ff ff 48 89 d0 48 83 c4 08 48 3d 01 RSP: 002b:00007ffc424ea2e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000007 RCX: 0000000000413511 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000006 RBP: 0000000000000001 R08: 0000000029a2fc22 R09: 0000000029a2fc26 R10: 00007ffc424ea3c0 R11: 0000000000000293 R12: 000000000075c9a0 R13: 000000000075c9a0 R14: 0000000000761938 R15: ffffffffffffffff Allocated by task 2776: save_stack+0x1b/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_kmalloc mm/kasan/common.c:487 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:460 kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:748 [inline] usb_alloc_dev+0x51/0xf95 drivers/usb/core/usb.c:583 hub_port_connect drivers/usb/core/hub.c:5004 [inline] hub_port_connect_change drivers/usb/core/hub.c:5213 [inline] port_event drivers/usb/core/hub.c:5359 [inline] hub_event+0x15c0/0x3640 drivers/usb/core/hub.c:5441 process_one_work+0x92b/0x1530 kernel/workqueue.c:2269 worker_thread+0x96/0xe20 kernel/workqueue.c:2415 kthread+0x318/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Freed by task 16007: save_stack+0x1b/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:449 slab_free_hook mm/slub.c:1423 [inline] slab_free_freelist_hook mm/slub.c:1470 [inline] slab_free mm/slub.c:3012 [inline] kfree+0xe4/0x2f0 mm/slub.c:3953 device_release+0x71/0x200 drivers/base/core.c:1064 kobject_cleanup lib/kobject.c:693 [inline] kobject_release lib/kobject.c:722 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x171/0x280 lib/kobject.c:739 put_device+0x1b/0x30 drivers/base/core.c:2213 usb_put_dev+0x1f/0x30 drivers/usb/core/usb.c:725 yurex_delete+0x40/0x330 drivers/usb/misc/yurex.c:95 kref_put include/linux/kref.h:65 [inline] yurex_release+0x66/0x90 drivers/usb/misc/yurex.c:392 __fput+0x2d7/0x840 fs/file_table.c:280 task_work_run+0x13f/0x1c0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_usermode_loop+0x1d2/0x200 arch/x86/entry/common.c:163 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath arch/x86/entry/common.c:274 [inline] do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881b1859980 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 72 bytes inside of 2048-byte region [ffff8881b1859980, ffff8881b185a180) The buggy address belongs to the page: page:ffffea0006c61600 refcount:1 mapcount:0 mapping:ffff8881da00c000 index:0x0 compound_mapcount: 0 flags: 0x200000000010200(slab|head) raw: 0200000000010200 0000000000000000 0000000100000001 ffff8881da00c000 raw: 0000000000000000 00000000000f000f 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881b1859880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881b1859900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc > ffff8881b1859980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881b1859a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881b1859a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== A quick look at the yurex_delete() shows that we drop the reference to the usb_device before releasing any buffers associated with the device. Delay the reference drop until we have finished the cleanup. [0] https://lore.kernel.org/lkml/0000000000003f86d8058f0bd671@google.com/ Fixes: 6bc235a2e24a5e ("USB: add driver for Meywa-Denki & Kayac YUREX") Cc: Jiri Kosina <jkosina@suse.cz> Cc: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Cc: Oliver Neukum <oneukum@suse.com> Cc: andreyknvl@google.com Cc: gregkh@linuxfoundation.org Cc: Alan Stern <stern@rowland.harvard.edu> Cc: syzkaller-bugs@googlegroups.com Cc: dtor@chromium.org Reported-by: syzbot+d1fedb1c1fdb07fca507@syzkaller.appspotmail.com Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190805111528.6758-1-suzuki.poulose@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: usbsevseg: convert to use dev_groupsGreg Kroah-Hartman2019-08-091-14/+3
| | | | | | | | | | | | | | | | | | | | | | USB drivers now support the ability for the driver core to handle the creation and removal of device-specific sysfs files in a race-free manner. Take advantage of that by converting the driver to use this by moving the sysfs attributes into a group and assigning the dev_groups pointer to it. Link: https://lore.kernel.org/r/20190806144502.17792-12-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: trancevibrator: convert to use dev_groupsGreg Kroah-Hartman2019-08-091-8/+7
| | | | | | | | | | | | | | | | | | | | | | | | USB drivers now support the ability for the driver core to handle the creation and removal of device-specific sysfs files in a race-free manner. Take advantage of that by converting the driver to use this by moving the sysfs attributes into a group and assigning the dev_groups pointer to it. Cc: Ding Xiang <dingxiang@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20190806144502.17792-11-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: cytherm: convert to use dev_groupsGreg Kroah-Hartman2019-08-091-45/+19
| | | | | | | | | | | | | | | | | | | | | | USB drivers now support the ability for the driver core to handle the creation and removal of device-specific sysfs files in a race-free manner. Take advantage of that by converting the driver to use this by moving the sysfs attributes into a group and assigning the dev_groups pointer to it. Link: https://lore.kernel.org/r/20190806144502.17792-9-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: cypress_cy7c63: convert to use dev_groupsGreg Kroah-Hartman2019-08-091-21/+8
| | | | | | | | | | | | | | | | | | | | | | USB drivers now support the ability for the driver core to handle the creation and removal of device-specific sysfs files in a race-free manner. Take advantage of that by converting the driver to use this by moving the sysfs attributes into a group and assigning the dev_groups pointer to it. Link: https://lore.kernel.org/r/20190806144502.17792-8-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: lvstest: convert to use dev_groupsGreg Kroah-Hartman2019-08-091-15/+4
|/ | | | | | | | | | | USB drivers now support the ability for the driver core to handle the creation and removal of device-specific sysfs files in a race-free manner. Take advantage of that by converting the driver to use this by moving the sysfs attributes into a group and assigning the dev_groups pointer to it. Link: https://lore.kernel.org/r/20190806144502.17792-10-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: usb251xb: Reallow swap-dx-lanes to apply to the upstream portLucas Stach2019-07-251-6/+7
| | | | | | | | | | | | | | | | | | | | This is a partial revert of 73d31def1aab "usb: usb251xb: Create a ports field collector method", which broke a existing devicetree (arch/arm64/boot/dts/freescale/imx8mq.dtsi). There is no reason why the swap-dx-lanes property should not apply to the upstream port. The reason given in the breaking commit was that it's inconsitent with respect to other port properties, but in fact it is not. All other properties which only apply to the downstream ports explicitly reject port 0, so there is pretty strong precedence that the driver referred to the upstream port as port 0. So there is no inconsistency in this property at all, other than the swapping being also applicable to the upstream port. CC: stable@vger.kernel.org #5.2 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20190719084407.28041-3-l.stach@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "usb: usb251xb: Add US port lanes inversion property"Lucas Stach2019-07-251-2/+0
| | | | | | | | | | | This property isn't needed and not yet used anywhere. The swap-dx-lanes property is perfectly fine for doing the swap on the upstream port lanes. CC: stable@vger.kernel.org #5.2 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20190719084407.28041-2-l.stach@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-5.3-rc1' of ↵Linus Torvalds2019-07-114-23/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / PHY updates from Greg KH: "Here is the big USB and PHY driver pull request for 5.3-rc1. Lots of stuff here, all of which has been in linux-next for a while with no reported issues. Nothing is earth-shattering, just constant forward progress for more devices supported and cleanups and small fixes: - USB gadget driver updates and fixes - new USB gadget driver for some hardware, followed by a quick revert of those patches as they were not ready to be merged... - PHY driver updates - Lots of new driver additions and cleanups with a few fixes mixed in" * tag 'usb-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits) Revert "usb: gadget: storage: Remove warning message" Revert "dt-bindings: add binding for USBSS-DRD controller." Revert "usb:gadget Separated decoding functions from dwc3 driver." Revert "usb:gadget Patch simplify usb_decode_set_clear_feature function." Revert "usb:gadget Simplify usb_decode_get_set_descriptor function." Revert "usb:cdns3 Add Cadence USB3 DRD Driver" Revert "usb:cdns3 Fix for stuck packets in on-chip OUT buffer." usb :fsl: Change string format for errata property usb: host: Stops USB controller init if PLL fails to lock usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918 usb: phy: Workaround for USB erratum-A005728 usb: fsl: Set USB_EN bit to select ULPI phy usb: Handle USB3 remote wakeup for LPM enabled devices correctly drivers/usb/typec/tps6598x.c: fix 4CC cmd write drivers/usb/typec/tps6598x.c: fix portinfo width usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set usb: renesas_usbhs: add a workaround for a race condition of workqueue usb: gadget: udc: renesas_usb3: remove redundant assignment to ret usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset() USB: gadget: function: fix issue Unneeded variable: "value" ...
| * usb: clean up some of the computations in adu_readDaniel M German2019-06-211-9/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace ?: with min to calculate the number of bytes in the secondary buffer, including changing the data type of data_in_secondary to size_t to be type-consistent. data_in_secondary can never be negative. Remove some spurious calculations (copy_to_user returns zero on success), making one variable redundant (i) This change does not alter the functionality of the code. Signed-off-by: Daniel M German <dmg@turingmachine.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * docs: usb: rename files to .rst and add them to drivers-apiMauro Carvalho Chehab2019-06-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While there are a mix of things here, most of the stuff were written from Kernel developer's PoV. So, add them to the driver-api book. A follow up for this patch would be to move documents from there that are specific to sysadmins, adding them to the admin-guide. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: sisusbvga: Remove unneeded variableHariprasad Kelam2019-06-101-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unneeded variable ret in function sisusb_set_default_mode. Change return type of sisusb_set_default_mode from int to void as it never fails. Issue identified by coccicheck Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> ----- changes in v2: Change return type of sisusb_set_default_mode from int to void as it never fails changes in v3: Update changelog ---- Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: ftdi-elan: fix possible condition with no effect (if == else)Hariprasad Kelam2019-06-031-7/+0
| | | | | | | | | | | | | | | | | | | | fix below warning reported by coccicheck ./drivers/usb/misc/ftdi-elan.c:2026:11-13: WARNING: possible condition with no effect (if == else) Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | docs: kbuild: convert docs to ReST and rename to *.rstMauro Carvalho Chehab2019-06-141-2/+2
|/ | | | | | | | | | | | | | | | | | | | | | The kbuild documentation clearly shows that the documents there are written at different times: some use markdown, some use their own peculiar logic to split sections. Convert everything to ReST without affecting too much the author's style and avoiding adding uneeded markups. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
* USB: rio500: simplify lockingOliver Neukum2019-05-211-27/+16
| | | | | | | | Admitting that there can be only one device allows us to drop any pretense about locking one device or a table of devices. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: rio500: fix memory leak in close after disconnectOliver Neukum2019-05-211-2/+15
| | | | | | | | | If a disconnected device is closed, rio_close() must free the buffers. Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: rio500: refuse more than one device at a timeOliver Neukum2019-05-211-6/+18
| | | | | | | | | | | This driver is using a global variable. It cannot handle more than one device at a time. The issue has been existing since the dawn of the driver. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+35f04d136fc975a70da4@syzkaller.appspotmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: sisusbvga: fix oops in error path of sisusb_probeOliver Neukum2019-05-211-7/+8
| | | | | | | | | | | | | The pointer used to log a failure of usb_register_dev() must be set before the error is logged. v2: fix that minor is not available before registration Signed-off-by: oliver Neukum <oneukum@suse.com> Reported-by: syzbot+a0cbdbd6d169020c8959@syzkaller.appspotmail.com Fixes: 7b5cd5fefbe02 ("USB: SisUSB2VGA: Convert printk to dev_* macros") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
View Lorry Controller Status