summaryrefslogtreecommitdiff
path: root/drivers/vdpa
Commit message (Collapse)AuthorAgeFilesLines
* vdpa_sim: set last_used_idx as last_avail_idx in vdpasim_queue_readyEugenio Pérez2023-03-131-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | Starting from an used_idx different than 0 is needed in use cases like virtual machine migration. Not doing so and letting the caller set an avail idx different than 0 causes destination device to try to use old buffers that source driver already recover and are not available anymore. Since vdpa_sim does not support receive inflight descriptors as a destination of a migration, let's set both avail_idx and used_idx the same at vq start. This is how vhost-user works in a VHOST_SET_VRING_BASE call. Although the simple fix is to set last_used_idx at vdpasim_set_vq_state, it would be reset at vdpasim_queue_ready. The last_avail_idx case is fixed with commit 0e84f918fac8 ("vdpa_sim: not reset state in vdpasim_queue_ready"). Since the only option is to make it equal to last_avail_idx, adding the only change needed here. This was discovered and tested live migrating the vdpa_sim_net device. Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230302181857.925374-1-eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* vdpa/mlx5: should not activate virtq object when suspendedSi-Wei Liu2023-03-102-1/+6
| | | | | | | | | | | | | | | | | | Otherwise the virtqueue object to instate could point to invalid address that was unmapped from the MTT: mlx5_core 0000:41:04.2: mlx5_cmd_out_err:782:(pid 8321): CREATE_GENERAL_OBJECT(0xa00) op_mod(0xd) failed, status bad parameter(0x3), syndrome (0x5fa1c), err(-22) Fixes: cae15c2ed8e6 ("vdpa/mlx5: Implement susupend virtqueue callback") Cc: Eli Cohen <elic@nvidia.com> Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Message-Id: <1676424640-11673-1-git-send-email-si-wei.liu@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
* vp_vdpa: fix the crash in hot unplug with vp_vdpaCindy Lu2023-03-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While unplugging the vp_vdpa device, it triggers a kernel panic The root cause is: vdpa_mgmtdev_unregister() will accesses modern devices which will cause a use after free. So need to change the sequence in vp_vdpa_remove [ 195.003359] BUG: unable to handle page fault for address: ff4e8beb80199014 [ 195.004012] #PF: supervisor read access in kernel mode [ 195.004486] #PF: error_code(0x0000) - not-present page [ 195.004960] PGD 100000067 P4D 1001b6067 PUD 1001b7067 PMD 1001b8067 PTE 0 [ 195.005578] Oops: 0000 1 PREEMPT SMP PTI [ 195.005968] CPU: 13 PID: 164 Comm: kworker/u56:10 Kdump: loaded Not tainted 5.14.0-252.el9.x86_64 #1 [ 195.006792] Hardware name: Red Hat KVM/RHEL, BIOS edk2-20221207gitfff6d81270b5-2.el9 unknown [ 195.007556] Workqueue: kacpi_hotplug acpi_hotplug_work_fn [ 195.008059] RIP: 0010:ioread8+0x31/0x80 [ 195.008418] Code: 77 28 48 81 ff 00 00 01 00 76 0b 89 fa ec 0f b6 c0 c3 cc cc cc cc 8b 15 ad 72 93 01 b8 ff 00 00 00 85 d2 75 0f c3 cc cc cc cc <8a> 07 0f b6 c0 c3 cc cc cc cc 83 ea 01 48 83 ec 08 48 89 fe 48 c7 [ 195.010104] RSP: 0018:ff4e8beb8067bab8 EFLAGS: 00010292 [ 195.010584] RAX: ffffffffc05834a0 RBX: ffffffffc05843c0 RCX: ff4e8beb8067bae0 [ 195.011233] RDX: ff1bcbd580f88000 RSI: 0000000000000246 RDI: ff4e8beb80199014 [ 195.011881] RBP: ff1bcbd587e39000 R08: ffffffff916fa2d0 R09: ff4e8beb8067ba68 [ 195.012527] R10: 000000000000001c R11: 0000000000000000 R12: ff1bcbd5a3de9120 [ 195.013179] R13: ffffffffc062d000 R14: 0000000000000080 R15: ff1bcbe402bc7805 [ 195.013826] FS: 0000000000000000(0000) GS:ff1bcbe402740000(0000) knlGS:0000000000000000 [ 195.014564] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 195.015093] CR2: ff4e8beb80199014 CR3: 0000000107dea002 CR4: 0000000000771ee0 [ 195.015741] PKRU: 55555554 [ 195.016001] Call Trace: [ 195.016233] <TASK> [ 195.016434] vp_modern_get_status+0x12/0x20 [ 195.016823] vp_vdpa_reset+0x1b/0x50 [vp_vdpa] [ 195.017238] virtio_vdpa_reset+0x3c/0x48 [virtio_vdpa] [ 195.017709] remove_vq_common+0x1f/0x3a0 [virtio_net] [ 195.018178] virtnet_remove+0x5d/0x70 [virtio_net] [ 195.018618] virtio_dev_remove+0x3d/0x90 [ 195.018986] device_release_driver_internal+0x1aa/0x230 [ 195.019466] bus_remove_device+0xd8/0x150 [ 195.019841] device_del+0x18b/0x3f0 [ 195.020167] ? kernfs_find_ns+0x35/0xd0 [ 195.020526] device_unregister+0x13/0x60 [ 195.020894] unregister_virtio_device+0x11/0x20 [ 195.021311] device_release_driver_internal+0x1aa/0x230 [ 195.021790] bus_remove_device+0xd8/0x150 [ 195.022162] device_del+0x18b/0x3f0 [ 195.022487] device_unregister+0x13/0x60 [ 195.022852] ? vdpa_dev_remove+0x30/0x30 [vdpa] [ 195.023270] vp_vdpa_dev_del+0x12/0x20 [vp_vdpa] [ 195.023694] vdpa_match_remove+0x2b/0x40 [vdpa] [ 195.024115] bus_for_each_dev+0x78/0xc0 [ 195.024471] vdpa_mgmtdev_unregister+0x65/0x80 [vdpa] [ 195.024937] vp_vdpa_remove+0x23/0x40 [vp_vdpa] [ 195.025353] pci_device_remove+0x36/0xa0 [ 195.025719] device_release_driver_internal+0x1aa/0x230 [ 195.026201] pci_stop_bus_device+0x6c/0x90 [ 195.026580] pci_stop_and_remove_bus_device+0xe/0x20 [ 195.027039] disable_slot+0x49/0x90 [ 195.027366] acpiphp_disable_and_eject_slot+0x15/0x90 [ 195.027832] hotplug_event+0xea/0x210 [ 195.028171] ? hotplug_event+0x210/0x210 [ 195.028535] acpiphp_hotplug_notify+0x22/0x80 [ 195.028942] ? hotplug_event+0x210/0x210 [ 195.029303] acpi_device_hotplug+0x8a/0x1d0 [ 195.029690] acpi_hotplug_work_fn+0x1a/0x30 [ 195.030077] process_one_work+0x1e8/0x3c0 [ 195.030451] worker_thread+0x50/0x3b0 [ 195.030791] ? rescuer_thread+0x3a0/0x3a0 [ 195.031165] kthread+0xd9/0x100 [ 195.031459] ? kthread_complete_and_exit+0x20/0x20 [ 195.031899] ret_from_fork+0x22/0x30 [ 195.032233] </TASK> Fixes: ffbda8e9df10 ("vdpa/vp_vdpa : add vdpa tool support in vp_vdpa") Tested-by: Lei Yang <leiyang@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Cindy Lu <lulu@redhat.com> Message-Id: <20230214080924.131462-1-lulu@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
* Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds2023-02-2520-382/+2433
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull virtio updates from Michael Tsirkin: - device feature provisioning in ifcvf, mlx5 - new SolidNET driver - support for zoned block device in virtio blk - numa support in virtio pmem - VIRTIO_F_RING_RESET support in vhost-net - more debugfs entries in mlx5 - resume support in vdpa - completion batching in virtio blk - cleanup of dma api use in vdpa - now simulating more features in vdpa-sim - documentation, features, fixes all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits) vdpa/mlx5: support device features provisioning vdpa/mlx5: make MTU/STATUS presence conditional on feature bits vdpa: validate device feature provisioning against supported class vdpa: validate provisioned device features against specified attribute vdpa: conditionally read STATUS in config space vdpa: fix improper error message when adding vdpa dev vdpa/mlx5: Initialize CVQ iotlb spinlock vdpa/mlx5: Don't clear mr struct on destroy MR vdpa/mlx5: Directly assign memory key tools/virtio: enable to build with retpoline vringh: fix a typo in comments for vringh_kiov vhost-vdpa: print warning when vhost_vdpa_alloc_domain fails scsi: virtio_scsi: fix handling of kmalloc failure vdpa: Fix a couple of spelling mistakes in some messages vhost-net: support VIRTIO_F_RING_RESET vhost-scsi: convert sysfs snprintf and sprintf to sysfs_emit vdpa: mlx5: support per virtqueue dma device vdpa: set dma mask for vDPA device virtio-vdpa: support per vq dma device vdpa: introduce get_vq_dma_device() ...
| * vdpa/mlx5: support device features provisioningSi-Wei Liu2023-02-201-8/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements features provisioning for mlx5_vdpa. 1) Validate the provisioned features are a subset of the parent features. 2) Clearing features that are not wanted by userspace. For example: # vdpa mgmtdev show pci/0000:41:04.2: supported_classes net max_supported_vqs 65 dev_features CSUM GUEST_CSUM MTU MAC HOST_TSO4 HOST_TSO6 STATUS CTRL_VQ CTRL_VLAN MQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM 1) Provision vDPA device with all features derived from the parent # vdpa dev add name vdpa1 mgmtdev pci/0000:41:04.2 # vdpa dev config show vdpa1: mac e4:11:c6:d3:45:f0 link up link_announce false max_vq_pairs 1 mtu 1500 negotiated_features CSUM GUEST_CSUM MTU HOST_TSO4 HOST_TSO6 STATUS CTRL_VQ CTRL_VLAN MQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM 2) Provision vDPA device with a subset of parent features # vdpa dev add name vdpa1 mgmtdev pci/0000:41:04.2 device_features 0x300020000 # vdpa dev config show vdpa1: negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Message-Id: <1675725124-7375-7-git-send-email-si-wei.liu@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vdpa/mlx5: make MTU/STATUS presence conditional on feature bitsSi-Wei Liu2023-02-201-8/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The spec says: mtu only exists if VIRTIO_NET_F_MTU is set status only exists if VIRTIO_NET_F_STATUS is set We should only present MTU and STATUS conditionally depending on the feature bits. Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Message-Id: <1675725124-7375-6-git-send-email-si-wei.liu@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vdpa: validate device feature provisioning against supported classSi-Wei Liu2023-02-201-9/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Today when device features are explicitly provisioned, the features user supplied may contain device class specific features that are not supported by the parent management device. On the other hand, when parent management device supports more than one class, the device features to provision may be ambiguous if none of the class specific attributes is provided at the same time. Validate these cases and prompt appropriate user errors accordingly. Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Message-Id: <1675725124-7375-5-git-send-email-si-wei.liu@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vdpa: validate provisioned device features against specified attributeSi-Wei Liu2023-02-201-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With device feature provisioning, there's a chance for misconfiguration that the vdpa feature attribute supplied in 'vdpa dev add' command doesn't get selected on the device_features to be provisioned. For instance, when a @mac attribute is specified, the corresponding feature bit _F_MAC in device_features should be set for consistency. If there's conflict on provisioned features against the attribute, it should be treated as an error to fail the ambiguous command. Noted the opposite is not necessarily true, for e.g. it's okay to have _F_MAC set in device_features without providing a corresponding @mac attribute, in which case the vdpa vendor driver could load certain default value for attribute that is not explicitly specified. Generalize this check in vdpa core so that there's no duplicate code in each vendor driver. Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Message-Id: <1675725124-7375-4-git-send-email-si-wei.liu@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vdpa: conditionally read STATUS in config spaceSi-Wei Liu2023-02-201-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The spec says: status only exists if VIRTIO_NET_F_STATUS is set Similar to MAC and MTU, vdpa_dev_net_config_fill() should read STATUS conditionally depending on the feature bits. Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Message-Id: <1675725124-7375-3-git-send-email-si-wei.liu@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vdpa: fix improper error message when adding vdpa devSi-Wei Liu2023-02-201-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In below example, before the fix, mtu attribute is supported by the parent mgmtdev, but the error message showing "All provided are not supported" is just misleading. $ vdpa mgmtdev show vdpasim_net: supported_classes net max_supported_vqs 3 dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM $ vdpa dev add mgmtdev vdpasim_net name vdpasim0 mtu 5000 max_vqp 2 Error: vdpa: All provided attributes are not supported. kernel answers: Operation not supported After fix, the relevant error message will be like: $ vdpa dev add mgmtdev vdpasim_net name vdpasim0 mtu 5000 max_vqp 2 Error: vdpa: Some provided attributes are not supported: 0x1000. kernel answers: Operation not supported Fixes: d8ca2fa5be1b ("vdpa: Enable user to set mac and mtu of vdpa device") Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Message-Id: <1675725124-7375-2-git-send-email-si-wei.liu@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vdpa/mlx5: Initialize CVQ iotlb spinlockEli Cohen2023-02-201-0/+1
| | | | | | | | | | | | | | | | | | Initialize itolb spinlock. Fixes: 5262912ef3cf ("vdpa/mlx5: Add support for control VQ and MAC setting") Signed-off-by: Eli Cohen <elic@nvidia.com> Message-Id: <20230206122016.1149373-1-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vdpa/mlx5: Don't clear mr struct on destroy MREli Cohen2023-02-201-1/+0
| | | | | | | | | | | | | | | | | | | | Clearing the mr struct erases the lock owner and causes warnings to be emitted. It is not required to clear the mr so remove the memset call. Fixes: 94abbccdf291 ("vdpa/mlx5: Add shared memory registration code") Signed-off-by: Eli Cohen <elic@nvidia.com> Message-Id: <20230206121956.1149356-1-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vdpa/mlx5: Directly assign memory keyEli Cohen2023-02-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | When creating a memory key, the key value should be assigned to the passed pointer and not or'ed to. No functional issue was observed due to this bug. Fixes: 29064bfdabd5 ("vdpa/mlx5: Add support library for mlx5 VDPA implementation") Signed-off-by: Eli Cohen <elic@nvidia.com> Message-Id: <20230205072906.1108194-1-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vdpa: Fix a couple of spelling mistakes in some messagesColin Ian King2023-02-202-2/+2
| | | | | | | | | | | | | | | | | | There are two spelling mistakes in some literal strings. Fix them. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Message-Id: <20230130092644.37002-1-colin.i.king@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
| * vdpa: mlx5: support per virtqueue dma deviceJason Wang2023-02-201-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements per virtqueue dma device for mlx5_vdpa. This is needed for virtio_vdpa to work for CVQ which is backed by vringh but not DMA. We simply advertise the vDPA device itself as the DMA device for CVQ then DMA API can simply use PA so the identical mapping for CVQ can still be used. Otherwise the identical (1:1) mapping won't work when platform IOMMU is enabled since the IOVA is allocated on demand which is not necessarily the PA. This fixes the following crash when mlx5 vDPA device is bound to virtio-vdpa with platform IOMMU enabled but not in passthrough mode: BUG: unable to handle page fault for address: ff2fb3063deb1002 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1393001067 P4D 1393002067 PUD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 55 PID: 8923 Comm: kworker/u112:3 Kdump: loaded Not tainted 6.1.0+ #7 Hardware name: Dell Inc. PowerEdge R750/0PJ80M, BIOS 1.5.4 12/17/2021 Workqueue: mlx5_vdpa_wq mlx5_cvq_kick_handler [mlx5_vdpa] RIP: 0010:vringh_getdesc_iotlb+0x93/0x1d0 [vringh] Code: 14 25 40 ef 01 00 83 82 c0 0a 00 00 01 48 2b 05 93 5a 1b ea 8b 4c 24 14 48 c1 f8 06 48 c1 e0 0c 48 03 05 90 5a 1b ea 48 01 c8 <0f> b7 00 83 aa c0 0a 00 00 01 65 ff 0d bc e4 41 3f 0f 84 05 01 00 RSP: 0018:ff46821ba664fdf8 EFLAGS: 00010282 RAX: ff2fb3063deb1002 RBX: 0000000000000a20 RCX: 0000000000000002 RDX: ff2fb318d2f94380 RSI: 0000000000000002 RDI: 0000000000000001 RBP: ff2fb3065e832410 R08: ff46821ba664fe00 R09: 0000000000000001 R10: 0000000000000000 R11: 000000000000000d R12: ff2fb3065e832488 R13: ff2fb3065e8324a8 R14: ff2fb3065e8324c8 R15: ff2fb3065e8324a8 FS: 0000000000000000(0000) GS:ff2fb3257fac0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ff2fb3063deb1002 CR3: 0000001392010006 CR4: 0000000000771ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> mlx5_cvq_kick_handler+0x89/0x2b0 [mlx5_vdpa] process_one_work+0x1e2/0x3b0 ? rescuer_thread+0x390/0x390 worker_thread+0x50/0x3a0 ? rescuer_thread+0x390/0x390 kthread+0xd6/0x100 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Reviewed-by: Eli Cohen <elic@nvidia.com> Tested-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230119061525.75068-6-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vdpa: set dma mask for vDPA deviceJason Wang2023-02-201-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Setting DMA mask for vDPA device in case that there are virtqueue that is not backed by DMA so the vDPA device could be advertised as the DMA device that is used by DMA API for software emulated virtqueues. Reviewed-by: Eli Cohen <elic@nvidia.com> Tested-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230119061525.75068-5-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vdpa_sim: get rid of DMA opsJason Wang2023-02-202-150/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We used to (ab)use the DMA ops for setting up identical mappings in the IOTLB. This patch tries to get rid of the those unnecessary DMA ops by maintaining a simple identical/passthrough mappings by default. When bound to virtio_vdpa driver, DMA API will simply use PA as the IOVA and we will be all fine. When the vDPA bus tries to setup customized mapping (e.g when bound to vhost-vDPA), the identical/passthrough mapping will be removed. Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20221223060021.28011-1-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de>
| * vdpa_sim_net: vendor satisticsJason Wang2023-02-201-6/+213
| | | | | | | | | | | | | | | | | | | | | | This patch adds support for basic vendor stats that include counters for tx, rx and cvq. Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20221223055548.27810-5-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
| * vdpa_sim: support vendor statisticsJason Wang2023-02-202-0/+17
| | | | | | | | | | | | | | | | | | | | | | This patch adds a new config ops callback to allow individual simulator to implement the vendor stats callback. Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20221223055548.27810-4-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
| * vdpasim: customize allocation sizeJason Wang2023-02-204-1/+7
| | | | | | | | | | | | | | | | | | | | Allow individual simulator to customize the allocation size. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20221223055548.27810-3-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vdpa_sim: switch to use __vdpa_alloc_device()Jason Wang2023-02-201-5/+8
| | | | | | | | | | | | | | | | | | | | This allows us to control the allocation size of the structure. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20221223055548.27810-2-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vdpa_sim: use weak barriersJason Wang2023-02-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | vDPA simulators are software emulated device, so let's switch to use weak barriers to avoid extra overhead in the driver. Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20221221062146.15356-1-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com>
| * vdpa_sim: Implement resume vdpa opSebastien Boeuf2023-02-202-0/+30
| | | | | | | | | | | | | | | | | | | | | | Implement resume operation for vdpa_sim devices, so vhost-vdpa will offer that backend feature and userspace can effectively resume the device. Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com> Message-Id: <15a4566826033c5dd9a2167e5cfb0ef4d90cea49.1672742878.git.sebastien.boeuf@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
| * virtio: vdpa: new SolidNET DPU driver.Alvaro Karsz2023-02-206-0/+1518
| | | | | | | | | | | | | | | | | | | | | | | | This commit includes: 1) The driver to manage the controlplane over vDPA bus. 2) A HW monitor device to read health values from the DPU. Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230110165638.123745-4-alvaro.karsz@solid-run.com> Message-Id: <20230209075128.78915-1-alvaro.karsz@solid-run.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vdpa_sim_net: Offer VIRTIO_NET_F_STATUSEugenio Pérez2023-02-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | VIRTIO_NET_S_LINK_UP is already returned in config reads since vdpasim creation, but the feature bit was not offered to the driver. Tested modifying VIRTIO_NET_S_LINK_UP and different values of "status" in qemu virtio-net options, using vhost_vdpa. Not considering as a fix, because there should be no driver trusting in this config read before the feature flag. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20221117155502.1394700-1-eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com>
| * vDPA/ifcvf: implement features provisioningZhu Lingshan2023-02-203-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit implements features provisioning for ifcvf, that means: 1)checkk whether the provisioned features are supported by the management device 2)vDPA device only presents selected feature bits Examples: a)The management device supported features: $ vdpa mgmtdev show pci/0000:01:00.5 pci/0000:01:00.5: supported_classes net max_supported_vqs 9 dev_features MTU MAC MRG_RXBUF CTRL_VQ MQ ANY_LAYOUT VERSION_1 ACCESS_PLATFORM b)Provision a vDPA device with all supported features: $ vdpa dev add name vdpa0 mgmtdev pci/0000:01:00.5 $ vdpa/vdpa dev config show vdpa0 vdpa0: mac 00:e8:ca:11:be:05 link up link_announce false max_vq_pairs 4 mtu 1500 negotiated_features MRG_RXBUF CTRL_VQ MQ VERSION_1 ACCESS_PLATFORM c)Provision a vDPA device with a subset of the supported features: $ vdpa dev add name vdpa0 mgmtdev pci/0000:01:00.5 device_features 0x300020020 $ vdpa dev config show vdpa0 mac 00:e8:ca:11:be:05 link up link_announce false negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Message-Id: <20221125145724.1129962-13-lingshan.zhu@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vDPA/ifcvf: retire ifcvf_private_to_vfZhu Lingshan2023-02-202-8/+5
| | | | | | | | | | | | | | | | | | | | This commit retires ifcvf_private_to_vf, because the vf is already a member of the adapter, so it could be easily addressed by adapter->vf. Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Message-Id: <20221125145724.1129962-12-lingshan.zhu@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vDPA/ifcvf: allocate the adapter in dev_add()Zhu Lingshan2023-02-201-21/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | The adapter is the container of the vdpa_device, this commits allocate the adapter in dev_add() rather than in probe(). So that the vdpa_device() could be re-created when the userspace creates the vdpa device, and free-ed in dev_del() Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Cc: stable@vger.kernel.org Message-Id: <20221125145724.1129962-11-lingshan.zhu@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vDPA/ifcvf: manage ifcvf_hw in the mgmt_devZhu Lingshan2023-02-202-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | This commit allocates the hw structure in the management device structure. So the hardware can be initialized once the management device is allocated in probe. Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Cc: stable@vger.kernel.org Message-Id: <20221125145724.1129962-10-lingshan.zhu@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vDPA/ifcvf: ifcvf_request_irq works on ifcvf_hwZhu Lingshan2023-02-201-3/+2
| | | | | | | | | | | | | | | | | | | | | | All ifcvf_request_irq's callees are refactored to work on ifcvf_hw, so it should be decoupled from the adapter as well Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Cc: stable@vger.kernel.org Message-Id: <20221125145724.1129962-9-lingshan.zhu@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vDPA/ifcvf: decouple config/dev IRQ requester and vectors allocator from the ↵Zhu Lingshan2023-02-201-12/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | adapter This commit decouples the config irq requester, the device shared irq requester and the MSI vectors allocator from the adapter. So they can be safely invoked since probe before the adapter is allocated. Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Cc: stable@vger.kernel.org Message-Id: <20221125145724.1129962-8-lingshan.zhu@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vDPA/ifcvf: decouple vq irq requester from the adapterZhu Lingshan2023-02-201-11/+8
| | | | | | | | | | | | | | | | | | | | This commit decouples the vq irq requester from the adapter, so that these functions can be invoked since probe. Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Cc: stable@vger.kernel.org Message-Id: <20221125145724.1129962-7-lingshan.zhu@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vDPA/ifcvf: decouple config IRQ releaser from the adapterZhu Lingshan2023-02-201-12/+10
| | | | | | | | | | | | | | | | | | | | | | This commit decouples config IRQ releaser from the adapter, so that it could be invoked once probe or in err handlers. ifcvf_free_irq() works on ifcvf_hw in this commit Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Cc: stable@vger.kernel.org Message-Id: <20221125145724.1129962-6-lingshan.zhu@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vDPA/ifcvf: decouple vq IRQ releasers from the adapterZhu Lingshan2023-02-201-12/+9
| | | | | | | | | | | | | | | | | | | | | | This commit decouples the IRQ releasers from the adapter, so that these functions could be safely invoked once probe Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Cc: stable@vger.kernel.org Message-Id: <20221125145724.1129962-5-lingshan.zhu@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vDPA/ifcvf: alloc the mgmt_dev before the adapterZhu Lingshan2023-02-201-17/+14
| | | | | | | | | | | | | | | | | | | | | | | | This commit reverses the order of allocating the management device and the adapter. So that it would be possible to move the allocation of the adapter to dev_add(). Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Cc: stable@vger.kernel.org Message-Id: <20221125145724.1129962-4-lingshan.zhu@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vDPA/ifcvf: decouple config space ops from the adapterZhu Lingshan2023-02-201-16/+5
| | | | | | | | | | | | | | | | | | | | | | This commit decopules the config space ops from the adapter layer, so these functions can be invoked once the device is probed. Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Cc: stable@vger.kernel.org Message-Id: <20221125145724.1129962-3-lingshan.zhu@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vDPA/ifcvf: decouple hw features manipulators from the adapterZhu Lingshan2023-02-203-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit gets rid of ifcvf_adapter in hw features related functions in ifcvf_base. Then these functions are more rubust and de-coupling from the ifcvf_adapter layer. So these functions could be invoded once the device is probed, even before the adapter is allocaed. Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Cc: stable@vger.kernel.org Message-Id: <20221125145724.1129962-2-lingshan.zhu@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vdpa/mlx5: Add RX counters to debugfsEli Cohen2023-02-204-30/+219
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For each interface, either VLAN tagged or untagged, add two hardware counters: one for unicast and another for multicast. The counters count RX packets and bytes and can be read through debugfs: $ cat /sys/kernel/debug/mlx5/mlx5_core.sf.1/vdpa-0/rx/untagged/mcast/packets $ cat /sys/kernel/debug/mlx5/mlx5_core.sf.1/vdpa-0/rx/untagged/ucast/bytes This feature is controlled via the config option MLX5_VDPA_STEERING_DEBUG. It is off by default as it may have some impact on performance. includes a fixup By Yang Yingliang <yangyingliang@huawei.com>: vdpa/mlx5: fix check wrong pointer in mlx5_vdpa_add_mac_vlan_rules() The local variable 'rule' is not used anymore, fix return value check after calling mlx5_add_flow_rules(). Signed-off-by: Eli Cohen <elic@nvidia.com> Message-Id: <20221114131759.57883-9-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Message-Id: <20230104074418.1737510-1-yangyingliang@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Eli Cohen <elic@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com>
| * vdpa/mlx5: Add debugfs subtreeEli Cohen2023-02-204-1/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add debugfs subtree and expose flow table ID and TIR number. This information can be used by external tools to do extended troubleshooting. The information can be retrieved like so: $ cat /sys/kernel/debug/mlx5/mlx5_core.sf.1/vdpa-0/rx/table_id $ cat /sys/kernel/debug/mlx5/mlx5_core.sf.1/vdpa-0/rx/tirn Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eli Cohen <elic@nvidia.com> Message-Id: <20221114131759.57883-8-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vdpa/mlx5: Move some definitions to a new header fileEli Cohen2023-02-202-44/+56
| | | | | | | | | | | | | | | | | | | | | | | | Move some definitions from mlx5_vnet.c to newly added header file mlx5_vnet.h. We need these definitions for the following patches that add debugfs tree to expose information vital for debug. Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eli Cohen <elic@nvidia.com> Message-Id: <20221114131759.57883-7-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * vdpa_sim: not reset state in vdpasim_queue_readyEugenio Pérez2023-02-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | vdpasim_queue_ready calls vringh_init_iotlb, which resets split indexes. But it can be called after setting a ring base with vdpasim_set_vq_state. Fix it by stashing them. They're still resetted in vdpasim_vq_reset. This was discovered and tested live migrating the vdpa_sim_net device. Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator") Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230118164359.1523760-2-eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com>
* | Merge tag 'mm-stable-2023-02-20-13-37' of ↵Linus Torvalds2023-02-231-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Daniel Verkamp has contributed a memfd series ("mm/memfd: add F_SEAL_EXEC") which permits the setting of the memfd execute bit at memfd creation time, with the option of sealing the state of the X bit. - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset() thread-safe for pmd unshare") which addresses a rare race condition related to PMD unsharing. - Several folioification patch serieses from Matthew Wilcox, Vishal Moola, Sidhartha Kumar and Lorenzo Stoakes - Johannes Weiner has a series ("mm: push down lock_page_memcg()") which does perform some memcg maintenance and cleanup work. - SeongJae Park has added DAMOS filtering to DAMON, with the series "mm/damon/core: implement damos filter". These filters provide users with finer-grained control over DAMOS's actions. SeongJae has also done some DAMON cleanup work. - Kairui Song adds a series ("Clean up and fixes for swap"). - Vernon Yang contributed the series "Clean up and refinement for maple tree". - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It adds to MGLRU an LRU of memcgs, to improve the scalability of global reclaim. - David Hildenbrand has added some userfaultfd cleanup work in the series "mm: uffd-wp + change_protection() cleanups". - Christoph Hellwig has removed the generic_writepages() library function in the series "remove generic_writepages". - Baolin Wang has performed some maintenance on the compaction code in his series "Some small improvements for compaction". - Sidhartha Kumar is doing some maintenance work on struct page in his series "Get rid of tail page fields". - David Hildenbrand contributed some cleanup, bugfixing and generalization of pte management and of pte debugging in his series "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap PTEs". - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation flag in the series "Discard __GFP_ATOMIC". - Sergey Senozhatsky has improved zsmalloc's memory utilization with his series "zsmalloc: make zspage chain size configurable". - Joey Gouly has added prctl() support for prohibiting the creation of writeable+executable mappings. The previous BPF-based approach had shortcomings. See "mm: In-kernel support for memory-deny-write-execute (MDWE)". - Waiman Long did some kmemleak cleanup and bugfixing in the series "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF". - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series "mm: multi-gen LRU: improve". - Jiaqi Yan has provided some enhancements to our memory error statistics reporting, mainly by presenting the statistics on a per-node basis. See the series "Introduce per NUMA node memory error statistics". - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog regression in compaction via his series "Fix excessive CPU usage during compaction". - Christoph Hellwig does some vmalloc maintenance work in the series "cleanup vfree and vunmap". - Christoph Hellwig has removed block_device_operations.rw_page() in ths series "remove ->rw_page". - We get some maple_tree improvements and cleanups in Liam Howlett's series "VMA tree type safety and remove __vma_adjust()". - Suren Baghdasaryan has done some work on the maintainability of our vm_flags handling in the series "introduce vm_flags modifier functions". - Some pagemap cleanup and generalization work in Mike Rapoport's series "mm, arch: add generic implementation of pfn_valid() for FLATMEM" and "fixups for generic implementation of pfn_valid()" - Baoquan He has done some work to make /proc/vmallocinfo and /proc/kcore better represent the real state of things in his series "mm/vmalloc.c: allow vread() to read out vm_map_ram areas". - Jason Gunthorpe rationalized the GUP system's interface to the rest of the kernel in the series "Simplify the external interface for GUP". - SeongJae Park wishes to migrate people from DAMON's debugfs interface over to its sysfs interface. To support this, we'll temporarily be printing warnings when people use the debugfs interface. See the series "mm/damon: deprecate DAMON debugfs interface". - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes and clean-ups" series. - Huang Ying has provided a dramatic reduction in migration's TLB flush IPI rates with the series "migrate_pages(): batch TLB flushing". - Arnd Bergmann has some objtool fixups in "objtool warning fixes". * tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits) include/linux/migrate.h: remove unneeded externs mm/memory_hotplug: cleanup return value handing in do_migrate_range() mm/uffd: fix comment in handling pte markers mm: change to return bool for isolate_movable_page() mm: hugetlb: change to return bool for isolate_hugetlb() mm: change to return bool for isolate_lru_page() mm: change to return bool for folio_isolate_lru() objtool: add UACCESS exceptions for __tsan_volatile_read/write kmsan: disable ftrace in kmsan core code kasan: mark addr_has_metadata __always_inline mm: memcontrol: rename memcg_kmem_enabled() sh: initialize max_mapnr m68k/nommu: add missing definition of ARCH_PFN_OFFSET mm: percpu: fix incorrect size in pcpu_obj_full_size() maple_tree: reduce stack usage with gcc-9 and earlier mm: page_alloc: call panic() when memoryless node allocation fails mm: multi-gen LRU: avoid futile retries migrate_pages: move THP/hugetlb migration support check to simplify code migrate_pages: batch flushing TLB migrate_pages: share more code between _unmap and _move ...
| * | mm: replace vma->vm_flags direct modifications with modifier callsSuren Baghdasaryan2023-02-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace direct modifications to vma->vm_flags with calls to modifier functions to be able to track flag changes and to keep vma locking correctness. [akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo] Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* | | Merge tag 'locking-core-2023-02-20' of ↵Linus Torvalds2023-02-201-1/+0
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: - rwsem micro-optimizations - spinlock micro-optimizations - cleanups, simplifications * tag 'locking-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: vduse: Remove include of rwlock.h locking/lockdep: Remove lockdep_init_map_crosslock. x86/ACPI/boot: Use try_cmpxchg() in __acpi_{acquire,release}_global_lock() x86/PAT: Use try_cmpxchg() in set_page_memtype() locking/rwsem: Disable preemption in all down_write*() and up_write() code paths locking/rwsem: Disable preemption in all down_read*() and up_read() code paths locking/rwsem: Prevent non-first waiter from spinning in down_write() slowpath locking/qspinlock: Micro-optimize pending state waiting for unlock
| * | vduse: Remove include of rwlock.hSebastian Andrzej Siewior2023-02-061-1/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | rwlock.h should not be included directly. Instead linux/splinlock.h should be included. Including it directly will break the RT build. Remove the rwlock.h include. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael S. Tsirkin <mst@redhat.com>
* | vdpa: ifcvf: Do proper cleanup if IFCVF init failsTanmay Bhushan2023-01-271-1/+1
|/ | | | | | | | | | | | | ifcvf_mgmt_dev leaks memory if it is not freed before returning. Call is made to correct return statement so memory does not leak. ifcvf_init_hw does not take care of this so it is needed to do it here. Signed-off-by: Tanmay Bhushan <007047221b@gmail.com> Message-Id: <772e9fe133f21fa78fb98a2ebe8969efbbd58e3c.camel@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Zhu Lingshan <lingshan.zhu@intel.com>
* vdpa_sim_net: should not drop the multicast/broadcast packetCindy Lu2022-12-281-0/+3
| | | | | | | | | | In the receive_filter(), should not drop the packet with the broadcast/multicast address. Add the check for this Signed-off-by: Cindy Lu <lulu@redhat.com> Message-Id: <20221214054306.24145-1-lulu@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
* vdpasim: fix memory leak when freeing IOTLBsJason Wang2022-12-281-1/+3
| | | | | | | | | | | | | | After commit bda324fd037a ("vdpasim: control virtqueue support"), vdpasim->iommu became an array of IOTLB, so we should clean the mappings of each free one by one instead of just deleting the ranges in the first IOTLB which may leak maps. Fixes: bda324fd037a ("vdpasim: control virtqueue support") Cc: Gautam Dawar <gautam.dawar@xilinx.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20221213090717.61529-1-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Gautam Dawar <gautam.dawar@amd.com>
* vdpa: conditionally fill max max queue pair for statsJason Wang2022-12-281-5/+4
| | | | | | | | | | | | | | | | | For the device without multiqueue feature, we will read 0 as max_virtqueue_pairs from the config. So if we fill VDPA_ATTR_DEV_NET_CFG_MAX_VQP with the value we read from the config we will confuse the user. Fixing this by only filling the value when multiqueue is offered by the device so userspace can assume 1 when the attr is not provided. Fixes: 13b00b135665c("vdpa: Add support for querying vendor statistics") Cc: Eli Cohen <elic@nvidia.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220907060110.4511-1-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eli Cohen <elic@nvidia.com>
* vdpa/vp_vdpa: fix kfree a wrong pointer in vp_vdpa_removeRong Wang2022-12-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In vp_vdpa_remove(), the code kfree(&vp_vdpa_mgtdev->mgtdev.id_table) uses a reference of pointer as the argument of kfree, which is the wrong pointer and then may hit crash like this: Unable to handle kernel paging request at virtual address 00ffff003363e30c Internal error: Oops: 96000004 [#1] SMP Call trace: rb_next+0x20/0x5c ext4_readdir+0x494/0x5c4 [ext4] iterate_dir+0x168/0x1b4 __se_sys_getdents64+0x68/0x170 __arm64_sys_getdents64+0x24/0x30 el0_svc_common.constprop.0+0x7c/0x1bc do_el0_svc+0x2c/0x94 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb4 el0_sync+0x160/0x180 Code: 54000220 f9400441 b4000161 aa0103e0 (f9400821) SMP: stopping secondary CPUs Starting crashdump kernel... Fixes: ffbda8e9df10 ("vdpa/vp_vdpa : add vdpa tool support in vp_vdpa") Signed-off-by: Rong Wang <wangrong68@huawei.com> Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Message-Id: <20221207120813.2837529-1-sunnanyong@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cindy Lu <lulu@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
View Lorry Controller Status