summaryrefslogtreecommitdiff
path: root/fs/jbd2/transaction.c
Commit message (Collapse)AuthorAgeFilesLines
* jbd2: track more dependencies on transaction commitJan Kara2016-06-301-0/+4
| | | | | | | | | | | | So far we were tracking only dependency on transaction commit due to starting a new handle (which may require commit to start a new transaction). Now add tracking also for other cases where we wait for transaction commit. This way lockdep can catch deadlocks e. g. because we call jbd2_journal_stop() for a synchronous handle with some locks held which rank below transaction start. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* jbd2: move lockdep tracking to journal_sJan Kara2016-06-301-8/+3
| | | | | | | | | | | Currently lockdep map is tracked in each journal handle. To be able to expand lockdep support to cover also other cases where we depend on transaction commit and where handle is not available, move lockdep map into struct journal_s. Since this makes the lockdep map shared for all handles, we have to use rwsem_acquire_read() for acquisitions now. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* jbd2: move lockdep instrumentation for jbd2 handlesJan Kara2016-06-301-2/+2
| | | | | | | | | | | The transaction the handle references is free to commit once we've decremented t_updates counter. Move the lockdep instrumentation to that place. Currently it was a bit later which did not really matter but subsequent improvements to lockdep instrumentation would cause false positives with it. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* Merge tag 'ext4_for_linus' of ↵Linus Torvalds2016-05-241-4/+18
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Fix a number of bugs, most notably a potential stale data exposure after a crash and a potential BUG_ON crash if a file has the data journalling flag enabled while it has dirty delayed allocation blocks that haven't been written yet. Also fix a potential crash in the new project quota code and a maliciously corrupted file system. In addition, fix some DAX-specific bugs, including when there is a transient ENOSPC situation and races between writes via direct I/O and an mmap'ed segment that could lead to lost I/O. Finally the usual set of miscellaneous cleanups" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits) ext4: pre-zero allocated blocks for DAX IO ext4: refactor direct IO code ext4: fix race in transient ENOSPC detection ext4: handle transient ENOSPC properly for DAX dax: call get_blocks() with create == 1 for write faults to unwritten extents ext4: remove unmeetable inconsisteny check from ext4_find_extent() jbd2: remove excess descriptions for handle_s ext4: remove unnecessary bio get/put ext4: silence UBSAN in ext4_mb_init() ext4: address UBSAN warning in mb_find_order_for_block() ext4: fix oops on corrupted filesystem ext4: fix check of dqget() return value in ext4_ioctl_setproject() ext4: clean up error handling when orphan list is corrupted ext4: fix hang when processing corrupted orphaned inode list ext4: remove trailing \n from ext4_warning/ext4_error calls ext4: fix races between changing inode journal mode and ext4_writepages ext4: handle unwritten or delalloc buffers before enabling data journaling ext4: fix jbd2 handle extension in ext4_ext_truncate_extend_restart() ext4: do not ask jbd2 to write data for delalloc buffers jbd2: add support for avoiding data writes during transaction commits ...
| * jbd2: add support for avoiding data writes during transaction commitsJan Kara2016-04-241-4/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently when filesystem needs to make sure data is on permanent storage before committing a transaction it adds inode to transaction's inode list. During transaction commit, jbd2 writes back all dirty buffers that have allocated underlying blocks and waits for the IO to finish. However when doing writeback for delayed allocated data, we allocate blocks and immediately submit the data. Thus asking jbd2 to write dirty pages just unnecessarily adds more work to jbd2 possibly writing back other redirtied blocks. Add support to jbd2 to allow filesystem to ask jbd2 to only wait for outstanding data writes before committing a transaction and thus avoid unnecessary writes. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* | Merge branch 'master' into for-nextJiri Kosina2016-04-181-28/+20
|\ \ | |/ | | | | | | | | Sync with Linus' tree so that patches against newer codebase can be applied. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov2016-04-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * jbd2: do not fail journal because of frozen_buffer allocation failureMichal Hocko2016-03-131-17/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Journal transaction might fail prematurely because the frozen_buffer is allocated by GFP_NOFS request: [ 72.440013] do_get_write_access: OOM for frozen_buffer [ 72.440014] EXT4-fs: ext4_reserve_inode_write:4729: aborting transaction: Out of memory in __ext4_journal_get_write_access [ 72.440015] EXT4-fs error (device sda1) in ext4_reserve_inode_write:4735: Out of memory (...snipped....) [ 72.495559] do_get_write_access: OOM for frozen_buffer [ 72.495560] EXT4-fs: ext4_reserve_inode_write:4729: aborting transaction: Out of memory in __ext4_journal_get_write_access [ 72.496839] do_get_write_access: OOM for frozen_buffer [ 72.496841] EXT4-fs: ext4_reserve_inode_write:4729: aborting transaction: Out of memory in __ext4_journal_get_write_access [ 72.505766] Aborting journal on device sda1-8. [ 72.505851] EXT4-fs (sda1): Remounting filesystem read-only This wasn't a problem until "mm: page_alloc: do not lock up GFP_NOFS allocations upon OOM" because small GPF_NOFS allocations never failed. This allocation seems essential for the journal and GFP_NOFS is too restrictive to the memory allocator so let's use __GFP_NOFAIL here to emulate the previous behavior. Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
| * fs: use block_device name vsprintf helperDmitry Monakhov2016-01-061-4/+2
| | | | | | | | | | Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds2015-12-071-3/+9
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Ext4 bug fixes for v4.4, including fixes for post-2038 time encodings, some endian conversion problems with ext4 encryption, potential memory leaks after truncate in data=journal mode, and an ocfs2 regression caused by a jbd2 performance improvement" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: fix null committed data return in undo_access ext4: add "static" to ext4_seq_##name##_fops struct ext4: fix an endianness bug in ext4_encrypted_follow_link() ext4: fix an endianness bug in ext4_encrypted_zeroout() jbd2: Fix unreclaimed pages after truncate in data=journal mode ext4: Fix handling of extended tv_sec
| | * jbd2: fix null committed data return in undo_accessJunxiao Bi2015-12-041-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | introduced jbd2_write_access_granted() to improve write|undo_access speed, but missed to check the status of b_committed_data which caused a kernel panic on ocfs2. [ 6538.405938] ------------[ cut here ]------------ [ 6538.406686] kernel BUG at fs/ocfs2/suballoc.c:2400! [ 6538.406686] invalid opcode: 0000 [#1] SMP [ 6538.406686] Modules linked in: ocfs2 nfsd lockd grace nfs_acl auth_rpcgss sunrpc autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sd_mod sg ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ppdev xen_kbdfront xen_netfront xen_fbfront parport_pc parport pcspkr i2c_piix4 acpi_cpufreq ext4 jbd2 mbcache xen_blkfront floppy pata_acpi ata_generic ata_piix cirrus ttm drm_kms_helper drm fb_sys_fops sysimgblt sysfillrect i2c_core syscopyarea dm_mirror dm_region_hash dm_log dm_mod [ 6538.406686] CPU: 1 PID: 16265 Comm: mmap_truncate Not tainted 4.3.0 #1 [ 6538.406686] Hardware name: Xen HVM domU, BIOS 4.3.1OVM 05/14/2014 [ 6538.406686] task: ffff88007c2bab00 ti: ffff880075b78000 task.ti: ffff880075b78000 [ 6538.406686] RIP: 0010:[<ffffffffa06a286b>] [<ffffffffa06a286b>] ocfs2_block_group_clear_bits+0x23b/0x250 [ocfs2] [ 6538.406686] RSP: 0018:ffff880075b7b7f8 EFLAGS: 00010246 [ 6538.406686] RAX: ffff8800760c5b40 RBX: ffff88006c06a000 RCX: ffffffffa06e6df0 [ 6538.406686] RDX: 0000000000000000 RSI: ffff88007a6f6ea0 RDI: ffff88007a760430 [ 6538.406686] RBP: ffff880075b7b878 R08: 0000000000000002 R09: 0000000000000001 [ 6538.406686] R10: ffffffffa06769be R11: 0000000000000000 R12: 0000000000000001 [ 6538.406686] R13: ffffffffa06a1750 R14: 0000000000000001 R15: ffff88007a6f6ea0 [ 6538.406686] FS: 00007f17fde30720(0000) GS:ffff88007f040000(0000) knlGS:0000000000000000 [ 6538.406686] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6538.406686] CR2: 0000000000601730 CR3: 000000007aea0000 CR4: 00000000000406e0 [ 6538.406686] Stack: [ 6538.406686] ffff88007c2bb5b0 ffff880075b7b8e0 ffff88007a7604b0 ffff88006c640800 [ 6538.406686] ffff88007a7604b0 ffff880075d77390 0000000075b7b878 ffffffffa06a309d [ 6538.406686] ffff880075d752d8 ffff880075b7b990 ffff880075b7b898 0000000000000000 [ 6538.406686] Call Trace: [ 6538.406686] [<ffffffffa06a309d>] ? ocfs2_read_group_descriptor+0x6d/0xa0 [ocfs2] [ 6538.406686] [<ffffffffa06a3654>] _ocfs2_free_suballoc_bits+0xe4/0x320 [ocfs2] [ 6538.406686] [<ffffffffa06a1750>] ? ocfs2_put_slot+0xf0/0xf0 [ocfs2] [ 6538.406686] [<ffffffffa06a397e>] _ocfs2_free_clusters+0xee/0x210 [ocfs2] [ 6538.406686] [<ffffffffa06a1750>] ? ocfs2_put_slot+0xf0/0xf0 [ocfs2] [ 6538.406686] [<ffffffffa06a1750>] ? ocfs2_put_slot+0xf0/0xf0 [ocfs2] [ 6538.406686] [<ffffffffa0682d50>] ? ocfs2_extend_trans+0x50/0x1a0 [ocfs2] [ 6538.406686] [<ffffffffa06a3ad5>] ocfs2_free_clusters+0x15/0x20 [ocfs2] [ 6538.406686] [<ffffffffa065072c>] ocfs2_replay_truncate_records+0xfc/0x290 [ocfs2] [ 6538.406686] [<ffffffffa06843ac>] ? ocfs2_start_trans+0xec/0x1d0 [ocfs2] [ 6538.406686] [<ffffffffa0654600>] __ocfs2_flush_truncate_log+0x140/0x2d0 [ocfs2] [ 6538.406686] [<ffffffffa0654394>] ? ocfs2_reserve_blocks_for_rec_trunc.clone.0+0x44/0x170 [ocfs2] [ 6538.406686] [<ffffffffa065acd4>] ocfs2_remove_btree_range+0x374/0x630 [ocfs2] [ 6538.406686] [<ffffffffa017486b>] ? jbd2_journal_stop+0x25b/0x470 [jbd2] [ 6538.406686] [<ffffffffa065d5b5>] ocfs2_commit_truncate+0x305/0x670 [ocfs2] [ 6538.406686] [<ffffffffa0683430>] ? ocfs2_journal_access_eb+0x20/0x20 [ocfs2] [ 6538.406686] [<ffffffffa067adb7>] ocfs2_truncate_file+0x297/0x380 [ocfs2] [ 6538.406686] [<ffffffffa01759e4>] ? jbd2_journal_begin_ordered_truncate+0x64/0xc0 [jbd2] [ 6538.406686] [<ffffffffa067c7a2>] ocfs2_setattr+0x572/0x860 [ocfs2] [ 6538.406686] [<ffffffff810e4a3f>] ? current_fs_time+0x3f/0x50 [ 6538.406686] [<ffffffff812124b7>] notify_change+0x1d7/0x340 [ 6538.406686] [<ffffffff8121abf9>] ? generic_getxattr+0x79/0x80 [ 6538.406686] [<ffffffff811f5876>] do_truncate+0x66/0x90 [ 6538.406686] [<ffffffff81120e30>] ? __audit_syscall_entry+0xb0/0x110 [ 6538.406686] [<ffffffff811f5bb3>] do_sys_ftruncate.clone.0+0xf3/0x120 [ 6538.406686] [<ffffffff811f5bee>] SyS_ftruncate+0xe/0x10 [ 6538.406686] [<ffffffff816aa2ae>] entry_SYSCALL_64_fastpath+0x12/0x71 [ 6538.406686] Code: 28 48 81 ee b0 04 00 00 48 8b 92 50 fb ff ff 48 8b 80 b0 03 00 00 48 39 90 88 00 00 00 0f 84 30 fe ff ff 0f 0b eb fe 0f 0b eb fe <0f> 0b 0f 1f 00 eb fb 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 [ 6538.406686] RIP [<ffffffffa06a286b>] ocfs2_block_group_clear_bits+0x23b/0x250 [ocfs2] [ 6538.406686] RSP <ffff880075b7b7f8> [ 6538.691128] ---[ end trace 31cd7011d6770d7e ]--- [ 6538.694492] Kernel panic - not syncing: Fatal exception [ 6538.695484] Kernel Offset: disabled Fixes: de92c8caf16c("jbd2: speedup jbd2_journal_get_[write|undo]_access()") Cc: <stable@vger.kernel.org> Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
| | * jbd2: Fix unreclaimed pages after truncate in data=journal modeJan Kara2015-11-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ted and Namjae have reported that truncated pages don't get timely reclaimed after being truncated in data=journal mode. The following test triggers the issue easily: for (i = 0; i < 1000; i++) { pwrite(fd, buf, 1024*1024, 0); fsync(fd); fsync(fd); ftruncate(fd, 0); } The reason is that journal_unmap_buffer() finds that truncated buffers are not journalled (jh->b_transaction == NULL), they are part of checkpoint list of a transaction (jh->b_cp_transaction != NULL) and have been already written out (!buffer_dirty(bh)). We clean such buffers but we leave them in the checkpoint list. Since checkpoint transaction holds a reference to the journal head, these buffers cannot be released until the checkpoint transaction is cleaned up. And at that point we don't call release_buffer_page() anymore so pages detached from mapping are lingering in the system waiting for reclaim to find them and free them. Fix the problem by removing buffers from transaction checkpoint lists when journal_unmap_buffer() finds out they don't have to be there anymore. Reported-and-tested-by: Namjae Jeon <namjae.jeon@samsung.com> Fixes: de1b794130b130e77ffa975bb58cb843744f9ae5 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
| * | mm, page_alloc: distinguish between being unable to sleep, unwilling to ↵Mel Gorman2015-11-061-2/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Doc: treewide : Fix typos in DocBook/filesystem.xmlMasanari Iida2016-04-181-3/+3
|/ | | | | | | | | This patch fix spelling typos found in DocBook/filesystem.xml. It is because the file was generated from comments in code, I have to fix the comments in codes, instead of xml file. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* jbd2: limit number of reserved creditsLukas Czerner2015-08-041-9/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently there is no limitation on number of reserved credits we can ask for. If we ask for more reserved credits than 1/2 of maximum transaction size, or if total number of credits exceeds the maximum transaction size per operation (which is currently only possible with the former) we will spin forever in start_this_handle(). Fix this by adding this limitation at the start of start_this_handle(). This patch also removes the credit limitation 1/2 of maximum transaction size, since we really only want to limit the number of reserved credits. There is not much point to limit the credits if there is still space in the journal. This accidentally also fixes the online resize, where due to the limitation of the journal credits we're unable to grow file systems with 1k block size and size between 16M and 32M. It has been partially fixed by 2c869b262a10ca99cb866d04087d75311587a30c, but not entirely. Thanks Jan Kara for helping me getting the correct fix. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* jbd2: speedup jbd2_journal_dirty_metadata()Jan Kara2015-07-121-6/+32
| | | | | | | | | | | | | | | | It is often the case that we mark buffer as having dirty metadata when the buffer is already in that state (frequent for bitmaps, inode table blocks, superblock). Thus it is unnecessary to contend on grabbing journal head reference and bh_state lock. Avoid that by checking whether any modification to the buffer is needed before grabbing any locks or references. [ Note: this is a fixed version of commit 2143c1965a761, which was reverted in ebeaa8ddb3663b5 due to a false positive triggering of an assertion check. -- Ted ] Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* Revert "jbd2: speedup jbd2_journal_dirty_metadata()"Linus Torvalds2015-06-271-27/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 2143c1965a761332ae417b22fd477b636e4f54ec. This commit seems to be the cause of the following jbd2 assertion failure: ------------[ cut here ]------------ kernel BUG at fs/jbd2/transaction.c:1325! invalid opcode: 0000 [#1] SMP Modules linked in: bnep bluetooth fuse ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 ... CPU: 7 PID: 5509 Comm: gcc Not tainted 4.1.0-10944-g2a298679b411 #1 Hardware name: /DH87RL, BIOS RLH8710H.86A.0327.2014.0924.1645 09/24/2014 task: ffff8803bf866040 ti: ffff880308528000 task.ti: ffff880308528000 RIP: jbd2_journal_dirty_metadata+0x237/0x290 Call Trace: __ext4_handle_dirty_metadata+0x43/0x1f0 ext4_handle_dirty_dirent_node+0xde/0x160 ? jbd2_journal_get_write_access+0x36/0x50 ext4_delete_entry+0x112/0x160 ? __ext4_journal_start_sb+0x52/0xb0 ext4_unlink+0xfa/0x260 vfs_unlink+0xec/0x190 do_unlinkat+0x24a/0x270 SyS_unlink+0x11/0x20 entry_SYSCALL_64_fastpath+0x12/0x6a ---[ end trace ae033ebde8d080b4 ]--- which is not easily reproducible (I've seen it just once, and then Ted was able to reproduce it once). Revert it while Ted and Jan try to figure out what is wrong. Cc: Jan Kara <jack@suse.cz> Acked-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* jbd2: speedup jbd2_journal_dirty_metadata()Jan Kara2015-06-201-6/+27
| | | | | | | | | | | | It is often the case that we mark buffer as having dirty metadata when the buffer is already in that state (frequent for bitmaps, inode table blocks, superblock). Thus it is unnecessary to contend on grabbing journal head reference and bh_state lock. Avoid that by checking whether any modification to the buffer is needed before grabbing any locks or references. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* jbd2: speedup jbd2_journal_get_[write|undo]_access()Jan Kara2015-06-081-4/+72
| | | | | | | | | | | | | | | | | | | | | jbd2_journal_get_write_access() and jbd2_journal_get_create_access() are frequently called for buffers that are already part of the running transaction - most frequently it is the case for bitmaps, inode table blocks, and superblock. Since in such cases we have nothing to do, it is unfortunate we still grab reference to journal head, lock the bh, lock bh_state only to find out there's nothing to do. Improving this is a bit subtle though since until we find out journal head is attached to the running transaction, it can disappear from under us because checkpointing / commit decided it's no longer needed. We deal with this by protecting journal_head slab with RCU. We still have to be careful about journal head being freed & reallocated within slab and about exposing journal head in consistent state (in particular b_modified and b_frozen_data must be in correct state before we allow user to touch the buffer). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* jbd2: more simplifications in do_get_write_access()Jan Kara2015-06-081-71/+59
| | | | | | | | | Check for the simple case of unjournaled buffer first, handle it and bail out. This allows us to remove one if and unindent the difficult case by one tab. The result is easier to read. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* jbd2: simplify error path on allocation failure in do_get_write_access()Jan Kara2015-06-081-2/+1
| | | | | | | | | | We were acquiring bh_state_lock when allocation of buffer failed in do_get_write_access() only to be able to jump to a label that releases the lock and does all other checks that don't make sense for this error path. Just jump into the right label instead. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* jbd2: simplify code flow in do_get_write_access()Jan Kara2015-06-081-24/+25
| | | | | | | | | needs_copy is set only in one place in do_get_write_access(), just move the frozen buffer copying into that place and factor it out to a separate function to make do_get_write_access() slightly more readable. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* jbd2: revert must-not-fail allocation loops back to GFP_NOFAILMichal Hocko2015-06-081-13/+7
| | | | | | | | | | | | | | | | | | | This basically reverts 47def82672b3 (jbd2: Remove __GFP_NOFAIL from jbd2 layer). The deprecation of __GFP_NOFAIL was a bad choice because it led to open coding the endless loop around the allocator rather than removing the dependency on the non failing allocation. So the deprecation was a clear failure and the reality tells us that __GFP_NOFAIL is not even close to go away. It is still true that __GFP_NOFAIL allocations are generally discouraged and new uses should be evaluated and an alternative (pre-allocations or reservations) should be considered but it doesn't make any sense to lie the allocator about the requirements. Allocator can take steps to help making a progress if it knows the requirements. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Acked-by: David Rientjes <rientjes@google.com>
* ext4: fix NULL pointer dereference when journal restart failsLukas Czerner2015-05-141-9/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently when journal restart fails, we'll have the h_transaction of the handle set to NULL to indicate that the handle has been effectively aborted. We handle this situation quietly in the jbd2_journal_stop() and just free the handle and exit because everything else has been done before we attempted (and failed) to restart the journal. Unfortunately there are a number of problems with that approach introduced with commit 41a5b913197c "jbd2: invalidate handle if jbd2_journal_restart() fails" First of all in ext4 jbd2_journal_stop() will be called through __ext4_journal_stop() where we would try to get a hold of the superblock by dereferencing h_transaction which in this case would lead to NULL pointer dereference and crash. In addition we're going to free the handle regardless of the refcount which is bad as well, because others up the call chain will still reference the handle so we might potentially reference already freed memory. Moreover it's expected that we'll get aborted handle as well as detached handle in some of the journalling function as the error propagates up the stack, so it's unnecessary to call WARN_ON every time we get detached handle. And finally we might leak some memory by forgetting to free reserved handle in jbd2_journal_stop() in the case where handle was detached from the transaction (h_transaction is NULL). Fix the NULL pointer dereference in __ext4_journal_stop() by just calling jbd2_journal_stop() quietly as suggested by Jan Kara. Also fix the potential memory leak in jbd2_journal_stop() and use proper handle refcounting before we attempt to free it to avoid use-after-free issues. And finally remove all WARN_ON(!transaction) from the code so that we do not get random traces when something goes wrong because when journal restart fails we will get to some of those functions. Cc: stable@vger.kernel.org Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
* sched: Remove proliferation of wait_on_bit() action functionsNeilBrown2014-07-161-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
* ext4: disable synchronous transaction batching if max_batch_time==0Eric Sandeen2014-07-051-1/+4
| | | | | | | | | | | | | | The mount manpage says of the max_batch_time option, This optimization can be turned off entirely by setting max_batch_time to 0. But the code doesn't do that. So fix the code to do that. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
* jbd2: improve error messages for inconsistent journal headsTheodore Ts'o2014-03-121-19/+14
| | | | | | | | | | Fix up error messages printed when the transaction pointers in a journal head are inconsistent. This improves the error messages which are printed when running xfstests generic/068 in data=journal mode. See the bug report at: https://bugzilla.kernel.org/show_bug.cgi?id=60786 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* jbd2: minimize region locked by j_list_lock in jbd2_journal_forget()Theodore Ts'o2014-03-091-2/+4
| | | | | | | | It's not needed until we start trying to modifying fields in the journal_head which are protected by j_list_lock. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* jbd2: minimize region locked by j_list_lock in journal_get_create_access()Theodore Ts'o2014-03-091-1/+2
| | | | | | | It's not needed until we start trying to modifying fields in the journal_head which are protected by j_list_lock. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* jbd2: check jh->b_transaction without taking j_list_lockTheodore Ts'o2014-03-091-2/+2
| | | | | | | | jh->b_transaction is adequately protected for reading by the jbd_lock_bh_state(bh), so we don't need to take j_list_lock in __journal_try_to_free_buffer(). Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* jbd2: fix use after free in jbd2_journal_start_reserved()Dan Carpenter2014-02-171-2/+4
| | | | | | | | | | If start_this_handle() fails then it leads to a use after free of "handle". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
* jbd2: rename obsoleted msg JBD->JBD2Dmitry Monakhov2013-12-081-3/+3
| | | | | | | | Rename performed via: perl -pi -e 's/JBD:/JBD2:/g' fs/jbd2/*.c Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
* jbd2: revise KERN_EMERG error messagesJan Kara2013-12-081-5/+5
| | | | | | | | | | | Some of KERN_EMERG printk messages do not really deserve this log level and the one in log_wait_commit() is even rather useless (the journal has been previously aborted and *that* is where we should have been complaining). So make some messages just KERN_ERR and remove the useless message. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* jbd2: don't BUG but return ENOSPC if a handle runs out of spaceTheodore Ts'o2013-12-081-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | If a handle runs out of space, we currently stop the kernel with a BUG in jbd2_journal_dirty_metadata(). This makes it hard to figure out what might be going on. So return an error of ENOSPC, so we can let the file system layer figure out what is going on, to make it more likely we can get useful debugging information). This should make it easier to debug problems such as the one which was reported by: https://bugzilla.kernel.org/show_bug.cgi?id=44731 The only two callers of this function are ext4_handle_dirty_metadata() and ocfs2_journal_dirty(). The ocfs2 function will trigger a BUG_ON(), which means there will be no change in behavior. The ext4 function will call ext4_error_inode() which will print the useful debugging information and then handle the situation using ext4's error handling mechanisms (i.e., which might mean halting the kernel or remounting the file system read-only). Also, since both file systems already call WARN_ON(), drop the WARN_ON from jbd2_journal_dirty_metadata() to avoid two stack traces from being displayed. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: ocfs2-devel@oss.oracle.com Acked-by: Joel Becker <jlbec@evilplan.org>
* jbd2: invalidate handle if jbd2_journal_restart() failsTheodore Ts'o2013-07-011-31/+43
| | | | | | | | | | | | | | | | | | | | If jbd2_journal_restart() fails the handle will have been disconnected from the current transaction. In this situation, the handle must not be used for for any jbd2 function other than jbd2_journal_stop(). Enforce this with by treating a handle which has a NULL transaction pointer as an aborted handle, and issue a kernel warning if jbd2_journal_extent(), jbd2_journal_get_write_access(), jbd2_journal_dirty_metadata(), etc. is called with an invalid handle. This commit also fixes a bug where jbd2_journal_stop() would trip over a kernel jbd2 assertion check when trying to free an invalid handle. Also move the responsibility of setting current->journal_info to start_this_handle(), simplifying the three users of this function. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reported-by: Younger Liu <younger.liu@huawei.com> Cc: Jan Kara <jack@suse.cz>
* jbd2: fix theoretical race in jbd2__journal_restartTheodore Ts'o2013-07-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | Once we decrement transaction->t_updates, if this is the last handle holding the transaction from closing, and once we release the t_handle_lock spinlock, it's possible for the transaction to commit and be released. In practice with normal kernels, this probably won't happen, since the commit happens in a separate kernel thread and it's unlikely this could all happen within the space of a few CPU cycles. On the other hand, with a real-time kernel, this could potentially happen, so save the tid found in transaction->t_tid before we release t_handle_lock. It would require an insane configuration, such as one where the jbd2 thread was set to a very high real-time priority, perhaps because a high priority real-time thread is trying to read or write to a file system. But some people who use real-time kernels have been known to do insane things, including controlling laser-wielding industrial robots. :-) Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
* jbd2: optimize jbd2_journal_force_commitDmitry Monakhov2013-06-121-23/+0
| | | | | | | | | | | Current implementation of jbd2_journal_force_commit() is suboptimal because result in empty and useless commits. But callers just want to force and wait any unfinished commits. We already have jbd2_journal_force_commit_nested() which does exactly what we want, except we are guaranteed that we do not hold journal transaction open. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* jbd2: transaction reservation supportJan Kara2013-06-041-88/+240
| | | | | | | | | | | | | | | | In some cases we cannot start a transaction because of locking constraints and passing started transaction into those places is not handy either because we could block transaction commit for too long. Transaction reservation is designed to solve these issues. It reserves a handle with given number of credits in the journal and the handle can be later attached to the running transaction without blocking on commit or checkpointing. Reserved handles do not block transaction commit in any way, they only reduce maximum size of the running transaction (because we have to always be prepared to accomodate request for attaching reserved handle). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* jbd2: fix race in t_outstanding_credits update in jbd2_journal_extend()Jan Kara2013-06-041-2/+4
| | | | | | | | | | | | jbd2_journal_extend() first checked whether transaction can accept extending handle with more credits and then added credits to t_outstanding_credits. This can race with start_this_handle() adding another handle to a transaction and thus overbooking a transaction. Make jbd2_journal_extend() use atomic_add_return() to close the race. Reviewed-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* jbd2: cleanup needed free block estimates when starting a transactionJan Kara2013-06-041-4/+5
| | | | | | | | | | | | | | | | | | | __jbd2_log_space_left() and jbd_space_needed() were kind of odd. jbd_space_needed() accounted also credits needed for currently committing transaction while it didn't account for credits needed for control blocks. __jbd2_log_space_left() then accounted for control blocks as a fraction of free space. Since results of these two functions are always only compared against each other, this works correct but is somewhat strange. Move the estimates so that jbd_space_needed() returns number of blocks needed for a transaction including control blocks and __jbd2_log_space_left() returns free space in the journal (with the committing transaction already subtracted). Rename functions to jbd2_log_space_left() and jbd2_space_needed() while we are changing them. Reviewed-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* jbd2: remove outdated commentJan Kara2013-06-041-10/+0
| | | | | | | | | The comment about credit estimates isn't true anymore. We do what the comment describes now. Reviewed-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* jbd2: refine waiting for shadow buffersJan Kara2013-06-041-25/+19
| | | | | | | | | | | | | | | | | | | | | | | Currently when we add a buffer to a transaction, we wait until the buffer is removed from BJ_Shadow list (so that we prevent any changes to the buffer that is just written to the journal). This can take unnecessarily long as a lot happens between the time the buffer is submitted to the journal and the time when we remove the buffer from BJ_Shadow list. (e.g. We wait for all data buffers in the transaction, we issue a cache flush, etc.) Also this creates a dependency of do_get_write_access() on transaction commit (namely waiting for data IO to complete) which we want to avoid when implementing transaction reservation. So we modify commit code to set new BH_Shadow flag when temporary shadowing buffer is created and we clear that flag once IO on that buffer is complete. This allows do_get_write_access() to wait only for BH_Shadow bit and thus removes the dependency on data IO completion. Reviewed-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* jbd2: remove journal_head from descriptor buffersJan Kara2013-06-041-6/+0
| | | | | | | | | Similarly as for metadata buffers, also log descriptor buffers don't really need the journal head. So strip it and remove BJ_LogCtl list. Reviewed-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* jbd2: don't create journal_head for temporary journal buffersJan Kara2013-06-041-10/+4
| | | | | | | | | | | | | | | When writing metadata to the journal, we create temporary buffer heads for that task. We also attach journal heads to these buffer heads but the only purpose of the journal heads is to keep buffers linked in transaction's BJ_IO list. We remove the need for journal heads by reusing buffer_head's b_assoc_buffers list for that purpose. Also since BJ_IO list is just a temporary list for transaction commit, we use a private list in jbd2_journal_commit_transaction() for that thus removing BJ_IO list from transaction completely. Reviewed-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* jbd2: change jbd2_journal_invalidatepage to accept lengthLukas Czerner2013-05-211-7/+17
| | | | | | | | | | | | | invalidatepage now accepts range to invalidate and there are two file system using jbd2 also implementing punch hole feature which can benefit from this. We need to implement the same thing for jbd2 layer in order to allow those file system take benefit of this functionality. This commit adds length argument to the jbd2_journal_invalidatepage() and updates all instances in ext4 and ocfs2. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz>
* jbd2: trace when lock_buffer in do_get_write_access takes a long timeTheodore Ts'o2013-04-211-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | While investigating interactivity problems it was clear that processes sometimes stall for long periods of times if an attempt is made to lock a buffer which is undergoing writeback. It would stall in a trace looking something like [<ffffffff811a39de>] __lock_buffer+0x2e/0x30 [<ffffffff8123a60f>] do_get_write_access+0x43f/0x4b0 [<ffffffff8123a7cb>] jbd2_journal_get_write_access+0x2b/0x50 [<ffffffff81220f79>] __ext4_journal_get_write_access+0x39/0x80 [<ffffffff811f3198>] ext4_reserve_inode_write+0x78/0xa0 [<ffffffff811f3209>] ext4_mark_inode_dirty+0x49/0x220 [<ffffffff811f57d1>] ext4_dirty_inode+0x41/0x60 [<ffffffff8119ac3e>] __mark_inode_dirty+0x4e/0x2d0 [<ffffffff8118b9b9>] update_time+0x79/0xc0 [<ffffffff8118ba98>] file_update_time+0x98/0x100 [<ffffffff81110ffc>] __generic_file_aio_write+0x17c/0x3b0 [<ffffffff811112aa>] generic_file_aio_write+0x7a/0xf0 [<ffffffff811ea853>] ext4_file_write+0x83/0xd0 [<ffffffff81172b23>] do_sync_write+0xa3/0xe0 [<ffffffff811731ae>] vfs_write+0xae/0x180 [<ffffffff8117361d>] sys_write+0x4d/0x90 [<ffffffff8159d62d>] system_call_fastpath+0x1a/0x1f [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* jbd2: use kmem_cache_zalloc instead of kmem_cache_alloc/memsetZheng Liu2013-04-191-1/+0
| | | | | | | | | The jbd2_alloc_handle() function is only called by new_handle(). So this commit uses kmem_cache_zalloc() instead of kmem_cache_alloc()/memset(). Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* jbd2: fix use after free in jbd2_journal_dirty_metadata()Jan Kara2013-03-111-5/+10
| | | | | | | | | | | | | | | | | | jbd2_journal_dirty_metadata() didn't get a reference to journal_head it was working with. This is OK in most of the cases since the journal head should be attached to a transaction but in rare occasions when we are journalling data, __ext4_journalled_writepage() can race with jbd2_journal_invalidatepage() stripping buffers from a page and thus journal head can be freed under hands of jbd2_journal_dirty_metadata(). Fix the problem by getting own journal head reference in jbd2_journal_dirty_metadata() (and also in jbd2_journal_set_triggers() which can possibly have the same issue). Reported-by: Zheng Liu <gnehzuil.liu@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
* jbd2: fix ERR_PTR dereference in jbd2__journal_startDmitry Monakhov2013-03-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | If start_this_handle() failed handle will be initialized to ERR_PTR() and can not be dereferenced. paging request at fffffffffffffff6 IP: [<ffffffff813c073f>] jbd2__journal_start+0x18f/0x290 PGD 200e067 PUD 200f067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod CPU 0 journal commit I/O error Pid: 2694, comm: fio Not tainted 3.8.0-rc3+ #79 /DQ67SW RIP: 0010:[<ffffffff813c073f>] [<ffffffff813c073f>] jbd2__journal_start+0x18f/0x290 RSP: 0018:ffff880233b8ba58 EFLAGS: 00010292 RAX: 00000000ffffffe2 RBX: ffffffffffffffe2 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff82128f48 RBP: ffff880233b8ba98 R08: 0000000000000000 R09: ffff88021440a6e0 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* jbd2: add tracepoints which provide per-handle statistics Theodore Ts'o2013-02-081-2/+26
| | | | | | | | | | Handles which stay open a long time are problematic when it comes time to close down a transaction so it can be committed. These tracepoints will help us determine which ones are the problematic ones, and to validate whether changes makes things better or worse. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
View Lorry Controller Status