summaryrefslogtreecommitdiff
path: root/include/net/route.h
Commit message (Collapse)AuthorAgeFilesLines
* Remove DST_HOSTDavid Laight2020-03-231-1/+1
| | | | | | | | | | Previous changes to the IP routing code have removed all the tests for the DS_HOST route flag. Remove the flags and all the code that sets it. Signed-off-by: David Laight <david.laight@aculab.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: UDP tunnel encapsulation module for tunnelling different protocols like ↵Martin Varghese2020-02-241-0/+6
| | | | | | | | | | | | MPLS, IP, NSH etc. The Bareudp tunnel module provides a generic L3 encapsulation tunnelling module for tunnelling different protocols like MPLS, IP,NSH etc inside a UDP tunnel. Signed-off-by: Martin Varghese <martin.varghese@nokia.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: use dst hint for ipv4 list receivePaolo Abeni2019-11-211-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is alike the previous change, with some additional ipv4 specific quirk. Even when using the route hint we still have to do perform additional per packet checks about source address validity: a new helper is added to wrap them. Hints are explicitly disabled if the destination is a local broadcast, that keeps the code simple and local broadcast are a slower path anyway. UDP flood performances vs recvmmsg() receiver: vanilla patched delta Kpps Kpps % 1683 1871 +11 In the worst case scenario - each packet has a different destination address - the performance delta is within noise range. v3 -> v4: - re-enable hints for forward v2 -> v3: - really fix build (sic) and hint usage check - use fib4_has_custom_rules() helpers (David A.) - add ip_extract_route_hint() helper (Edward C.) - use prev skb as hint instead of copying data (Willem) v1 -> v2: - fix build issue with !CONFIG_IP_MULTIPLE_TABLES Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Revert removal of rt_uses_gatewayDavid Ahern2019-09-201-1/+2
| | | | | | | | | | | | | | | | | | | | Julian noted that rt_uses_gateway has a more subtle use than 'is gateway set': https://lore.kernel.org/netdev/alpine.LFD.2.21.1909151104060.2546@ja.home.ssi.bg/ Revert that part of the commit referenced in the Fixes tag. Currently, there are no u8 holes in 'struct rtable'. There is a 4-byte hole in the second cacheline which contains the gateway declaration. So move rt_gw_family down to the gateway declarations since they are always used together, and then re-use that u8 for rt_uses_gateway. End result is that rtable size is unchanged. Fixes: 1550c171935d ("ipv4: Prepare rtable for IPv6 gateway") Reported-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
* net: route dump netlink NLM_F_MULTI flag missingJohn Fastabend2019-08-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An excerpt from netlink(7) man page, In multipart messages (multiple nlmsghdr headers with associated payload in one byte stream) the first and all following headers have the NLM_F_MULTI flag set, except for the last header which has the type NLMSG_DONE. but, after (ee28906) there is a missing NLM_F_MULTI flag in the middle of a FIB dump. The result is user space applications following above man page excerpt may get confused and may stop parsing msg believing something went wrong. In the golang netlink lib [0] the library logic stops parsing believing the message is not a multipart message. Found this running Cilium[1] against net-next while adding a feature to auto-detect routes. I noticed with multiple route tables we no longer could detect the default routes on net tree kernels because the library logic was not returning them. Fix this by handling the fib_dump_info_fnhe() case the same way the fib_dump_info() handles it by passing the flags argument through the call chain and adding a flags argument to rt_fill_info(). Tested with Cilium stack and auto-detection of routes works again. Also annotated libs to dump netlink msgs and inspected NLM_F_MULTI and NLMSG_DONE flags look correct after this. Note: In inet_rtm_getroute() pass rt_fill_info() '0' for flags the same as is done for fib_dump_info() so this looks correct to me. [0] https://github.com/vishvananda/netlink/ [1] https://github.com/cilium/ Fixes: ee28906fd7a14 ("ipv4: Dump route exceptions if requested") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2019-06-271-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | The new route handling in ip_mc_finish_output() from 'net' overlapped with the new support for returning congestion notifications from BPF programs. In order to handle this I had to take the dev_loopback_xmit() calls out of the switch statement. The aquantia driver conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv4: reset rt_iif for recirculated mcast/bcast out pktsStephen Suryaputra2019-06-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Multicast or broadcast egress packets have rt_iif set to the oif. These packets might be recirculated back as input and lookup to the raw sockets may fail because they are bound to the incoming interface (skb_iif). If rt_iif is not zero, during the lookup, inet_iif() function returns rt_iif instead of skb_iif. Hence, the lookup fails. v2: Make it non vrf specific (David Ahern). Reword the changelog to reflect it. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv4: Dump route exceptions if requestedStefano Brivio2019-06-241-0/+4
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions."), cached exception routes are stored as a separate entity, so they are not dumped on a FIB dump, even if the RTM_F_CLONED flag is passed. This implies that the command 'ip route list cache' doesn't return any result anymore. If the RTM_F_CLONED is passed, and strict checking requested, retrieve nexthop exception routes and dump them. If no strict checking is requested, filtering can't be performed consistently: dump everything in that case. With this, we need to add an argument to the netlink callback in order to track how many entries were already dumped for the last leaf included in a partial netlink dump. A single additional argument is sufficient, even if we traverse logically nested structures (nexthop objects, hash table buckets, bucket chains): it doesn't matter if we stop in the middle of any of those, because they are always traversed the same way. As an example, s_i values in [], s_fa values in (): node (fa) #1 [1] nexthop #1 bucket #1 -> #0 in chain (1) bucket #2 -> #0 in chain (2) -> #1 in chain (3) -> #2 in chain (4) bucket #3 -> #0 in chain (5) -> #1 in chain (6) nexthop #2 bucket #1 -> #0 in chain (7) -> #1 in chain (8) bucket #2 -> #0 in chain (9) -- node (fa) #2 [2] nexthop #1 bucket #1 -> #0 in chain (1) -> #1 in chain (2) bucket #2 -> #0 in chain (3) it doesn't matter if we stop at (3), (4), (7) for "node #1", or at (2) for "node #2": walking flattens all that. It would even be possible to drop the distinction between the in-tree (s_i) and in-node (s_fa) counter, but a further improvement might advise against this. This is only as accurate as the existing tracking mechanism for leaves: if a partial dump is restarted after exceptions are removed or expired, we might skip some non-dumped entries. To improve this, we could attach a 'sernum' attribute (similar to the one used for IPv6) to nexthop entities, and bump this counter whenever exceptions change: having a distinction between the two counters would make this more convenient. Listing of exception routes (modified routes pre-3.5) was tested against these versions of kernel and iproute2: iproute2 kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0 3.5-rc4 + + + + + 4.4 4.9 4.14 4.15 4.19 5.0 5.1 fixed + + + + + v7: - Move loop over nexthop objects to route.c, and pass struct fib_info and table ID to it, not a struct fib_alias (suggested by David Ahern) - While at it, note that the NULL check on fa->fa_info is redundant, and the check on RTNH_F_DEAD is also not consistent with what's done with regular route listing: just keep it for nhc_flags - Rename entry point function for dumping exceptions to fib_dump_info_fnhe(), and rearrange arguments for consistency with fib_dump_info() - Rename fnhe_dump_buckets() to fnhe_dump_bucket() and make it handle one bucket at a time - Expand commit message to describe why we can have a single "skip" counter for all exceptions stored in bucket chains in nexthop objects (suggested by David Ahern) v6: - Rebased onto net-next - Loop over nexthop paths too. Move loop over fnhe buckets to route.c, avoids need to export rt_fill_info() and to touch exceptions from fib_trie.c. Pass NULL as flow to rt_fill_info(), it now allows that (suggested by David Ahern) Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner2019-05-301-5/+1
| | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv4: Add helpers for neigh lookup for nexthopDavid Ahern2019-04-081-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A common theme in the output path is looking up a neigh entry for a nexthop, either the gateway in an rtable or a fallback to the daddr in the skb: nexthop = (__force u32)rt_nexthop(rt, ip_hdr(skb)->daddr); neigh = __ipv4_neigh_lookup_noref(dev, nexthop); if (unlikely(!neigh)) neigh = __neigh_create(&arp_tbl, &nexthop, dev, false); To allow the nexthop to be an IPv6 address we need to consider the family of the nexthop and then call __ipv{4,6}_neigh_lookup_noref based on it. To make this simpler, add a ip_neigh_gw4 helper similar to ip_neigh_gw6 added in an earlier patch which handles: neigh = __ipv4_neigh_lookup_noref(dev, nexthop); if (unlikely(!neigh)) neigh = __neigh_create(&arp_tbl, &nexthop, dev, false); And then add a second one, ip_neigh_for_gw, that calls either ip_neigh_gw4 or ip_neigh_gw6 based on the address family of the gateway. Update the output paths in the VRF driver and core v4 code to use ip_neigh_for_gw simplifying the family based lookup and making both ready for a v6 nexthop. ipv4_neigh_lookup has a different need - the potential to resolve a passed in address in addition to any gateway in the rtable or skb. Since this is a one-off, add ip_neigh_gw4 and ip_neigh_gw6 diectly. The difference between __neigh_create used by the helpers and neigh_create called by ipv4_neigh_lookup is taking a refcount, so add rcu_read_lock_bh and bump the refcnt on the neigh entry. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Add support to rtable for ipv6 gatewayDavid Ahern2019-04-081-1/+4
| | | | | | | | | | | | Add support for an IPv6 gateway to rtable. Since a gateway is either IPv4 or IPv6, make it a union with rt_gw4 where rt_gw_family decides which address is in use. When dumping the route data, encode an ipv6 nexthop using RTA_VIA. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Prepare rtable for IPv6 gatewayDavid Ahern2019-04-081-4/+4
| | | | | | | | | | | To allow the gateway to be either an IPv4 or IPv6 address, remove rt_uses_gateway from rtable and replace with rt_gw_family. If rt_gw_family is set it implies rt_uses_gateway. Rename rt_gateway to rt_gw4 to represent the IPv4 version. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net-ipv4: remove 2 always zero parameters from ipv4_redirect()Maciej Żenczykowski2018-09-261-2/+1
| | | | | | | | (the parameters in question are mark and flow_flags) Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net-ipv4: remove 2 always zero parameters from ipv4_update_pmtu()Maciej Żenczykowski2018-09-261-1/+1
| | | | | | | | (the parameters in question are mark and flow_flags) Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/ipv4: Add support for specifying metric of connected routesDavid Ahern2018-05-291-0/+1
| | | | | | | | | | | Add support for IFA_RT_PRIORITY to ipv4 addresses. If the metric is changed on an existing address then the new route is inserted before removing the old one. Since the metric is one of the route keys, the prefix route can not be replaced. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-03-231-1/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtuSabrina Dubroca2018-03-141-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prior to the rework of PMTU information storage in commit 2c8cec5c10bc ("ipv4: Cache learned PMTU information in inetpeer."), when a PMTU event advertising a PMTU smaller than net.ipv4.route.min_pmtu was received, we would disable setting the DF flag on packets by locking the MTU metric, and set the PMTU to net.ipv4.route.min_pmtu. Since then, we don't disable DF, and set PMTU to net.ipv4.route.min_pmtu, so the intermediate router that has this link with a small MTU will have to drop the packets. This patch reestablishes pre-2.6.39 behavior by splitting rtable->rt_pmtu into a bitfield with rt_mtu_locked and rt_pmtu. rt_mtu_locked indicates that we shouldn't set the DF bit on that path, and is checked in ip_dont_fragment(). One possible workaround is to set net.ipv4.route.min_pmtu to a value low enough to accommodate the lowest MTU encountered. Fixes: 2c8cec5c10bc ("ipv4: Cache learned PMTU information in inetpeer.") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * xfrm: reuse uncached_list to track xdstsXin Long2018-02-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In early time, when freeing a xdst, it would be inserted into dst_garbage.list first. Then if it's refcnt was still held somewhere, later it would be put into dst_busy_list in dst_gc_task(). When one dev was being unregistered, the dev of these dsts in dst_busy_list would be set with loopback_dev and put this dev. So that this dev's removal wouldn't get blocked, and avoid the kmsg warning: kernel:unregister_netdevice: waiting for veth0 to become \ free. Usage count = 2 However after Commit 52df157f17e5 ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle"), the xdst will not be freed with dst gc, and this warning happens. To fix it, we need to find these xdsts that are still held by others when removing the dev, and free xdst's dev and set it with loopback_dev. But unfortunately after flow_cache for xfrm was deleted, no list tracks them anymore. So we need to save these xdsts somewhere to release the xdst's dev later. To make this easier, this patch is to reuse uncached_list to track xdsts, so that the dev refcnt can be released in the event NETDEV_UNREGISTER process of fib_netdev_notifier. Thanks to Florian, we could move forward this fix quickly. Fixes: 52df157f17e5 ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle") Reported-by: Jianlin Shi <jishi@redhat.com> Reported-by: Hangbin Liu <liuhangbin@gmail.com> Tested-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
* | net/ipv4: Remove fib table id from rtableDavid Ahern2018-02-151-2/+0
|/ | | | | | | | | | Remove rt_table_id from rtable. It was added for getroute to return the table id that was hit in the lookup. With the changes for fibmatch the table id can be extracted from the fib_info returned in the fib_result so it no longer needs to be in rtable directly. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip_rt_ioctl(): take copyin to callerAl Viro2018-01-241-1/+1
| | | | | Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* udp: perform source validation for mcast early demuxPaolo Abeni2017-10-011-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The UDP early demux can leverate the rx dst cache even for multicast unconnected sockets. In such scenario the ipv4 source address is validated only on the first packet in the given flow. After that, when we fetch the dst entry from the socket rx cache, we stop enforcing the rp_filter and we even start accepting any kind of martian addresses. Disabling the dst cache for unconnected multicast socket will cause large performace regression, nearly reducing by half the max ingress tput. Instead we factor out a route helper to completely validate an skb source address for multicast packets and we call it from the UDP early demux for mcast packets landing on unconnected sockets, after successful fetching the related cached dst entry. This still gives a measurable, but limited performance regression: rp_filter = 0 rp_filter = 1 edmux disabled: 1182 Kpps 1127 Kpps edmux before: 2238 Kpps 2238 Kpps edmux after: 2037 Kpps 2019 Kpps The above figures are on top of current net tree. Applying the net-next commit 6e617de84e87 ("net: avoid a full fib lookup when rp_filter is disabled.") the delta with rp_filter == 0 will decrease even more. Fixes: 421b3885bf6d ("udp: ipv4: Add udp early demux") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: prevent dst uses after freeEric Dumazet2017-09-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In linux-4.13, Wei worked hard to convert dst to a traditional refcounted model, removing GC. We now want to make sure a dst refcount can not transition from 0 back to 1. The problem here is that input path attached a not refcounted dst to an skb. Then later, because packet is forwarded and hits skb_dst_force() before exiting RCU section, we might try to take a refcount on one dst that is about to be freed, if another cpu saw 1 -> 0 transition in dst_release() and queued the dst for freeing after one RCU grace period. Lets unify skb_dst_force() and skb_dst_force_safe(), since we should always perform the complete check against dst refcount, and not assume it is not zero. Bugzilla : https://bugzilla.kernel.org/show_bug.cgi?id=197005 [ 989.919496] skb_dst_force+0x32/0x34 [ 989.919498] __dev_queue_xmit+0x1ad/0x482 [ 989.919501] ? eth_header+0x28/0xc6 [ 989.919502] dev_queue_xmit+0xb/0xd [ 989.919504] neigh_connected_output+0x9b/0xb4 [ 989.919507] ip_finish_output2+0x234/0x294 [ 989.919509] ? ipt_do_table+0x369/0x388 [ 989.919510] ip_finish_output+0x12c/0x13f [ 989.919512] ip_output+0x53/0x87 [ 989.919513] ip_forward_finish+0x53/0x5a [ 989.919515] ip_forward+0x2cb/0x3e6 [ 989.919516] ? pskb_trim_rcsum.part.9+0x4b/0x4b [ 989.919518] ip_rcv_finish+0x2e2/0x321 [ 989.919519] ip_rcv+0x26f/0x2eb [ 989.919522] ? vlan_do_receive+0x4f/0x289 [ 989.919523] __netif_receive_skb_core+0x467/0x50b [ 989.919526] ? tcp_gro_receive+0x239/0x239 [ 989.919529] ? inet_gro_receive+0x226/0x238 [ 989.919530] __netif_receive_skb+0x4d/0x5f [ 989.919532] netif_receive_skb_internal+0x5c/0xaf [ 989.919533] napi_gro_receive+0x45/0x81 [ 989.919536] ixgbe_poll+0xc8a/0xf09 [ 989.919539] ? kmem_cache_free_bulk+0x1b6/0x1f7 [ 989.919540] net_rx_action+0xf4/0x266 [ 989.919543] __do_softirq+0xa8/0x19d [ 989.919545] irq_exit+0x5d/0x6b [ 989.919546] do_IRQ+0x9c/0xb5 [ 989.919548] common_interrupt+0x93/0x93 [ 989.919548] </IRQ> Similarly dst_clone() can use dst_hold() helper to have additional debugging, as a follow up to commit 44ebe79149ff ("net: add debug atomic_inc_not_zero() in dst_hold()") In net-next we will convert dst atomic_t to refcount_t for peace of mind. Fixes: a4c2fd7f7891 ("net: remove DST_NOCACHE flag") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Reported-by: Paweł Staszewski <pstaszewski@itcare.pl> Bisected-by: Paweł Staszewski <pstaszewski@itcare.pl> Acked-by: Wei Wang <weiwan@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Don't override return code from ip_route_input_noref()Stefano Brivio2017-09-031-3/+4
| | | | | | | | | | | | | | | | | After ip_route_input() calls ip_route_input_noref(), another check on skb_dst() is done, but if this fails, we shouldn't override the return code from ip_route_input_noref(), as it could have been more specific (i.e. -EHOSTUNREACH). This also saves one call to skb_dst_force_safe() and one to skb_dst() in case the ip_route_input_noref() check fails. Reported-by: Sabrina Dubroca <sdubroca@redhat.com> Fixes: 9df16efadd2a ("ipv4: call dst_hold_safe() properly") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Wei Wang <weiwan@google.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: call dst_hold_safe() properlyWei Wang2017-06-171-1/+3
| | | | | | | | | | | | | | | | | | | | | | | This patch checks all the calls to dst_hold()/skb_dst_force()/dst_clone()/dst_use() to see if dst_hold_safe() is needed to avoid double free issue if dst gc is removed and dst_release() directly destroys dst when dst->__refcnt drops to 0. In tx path, TCP hold sk->sk_rx_dst ref count and also hold sock_lock(). UDP and other similar protocols always hold refcount for skb->_skb_refdst. So both paths seem to be safe. In rx path, as it is lockless and skb_dst_set_noref() is likely to be used, dst_hold_safe() should always be used when trying to hold dst. In the routing code, if dst is held during an rcu protected session, it is necessary to call dst_hold_safe() as the current dst might be in its rcu grace period. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ipv4: refactor ip_route_input_norefDavid Ahern2017-05-261-0/+3
| | | | | | | | | | | A later patch wants access to the fib result on an input route lookup with the rcu lock held. Refactor ip_route_input_noref pushing the logic between rcu_read_lock ... rcu_read_unlock into a new helper that takes the fib_result as an input arg. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ipv4: refactor __ip_route_output_key_hashDavid Ahern2017-05-261-3/+6
| | | | | | | | | | | | | | | A later patch wants access to the fib result on an output route lookup with the rcu lock held. Refactor __ip_route_output_key_hash, pushing the logic between rcu_read_lock ... rcu_read_unlock into a new helper with the fib_result as an input arg. To keep the name length under control remove the leading underscores from the name and add _rcu to the name of the new helper indicating it is called with the rcu read lock held. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ipv4: add support for ECMP hash policy choiceNikolay Aleksandrov2017-03-211-3/+3
| | | | | | | | | | | | | | | | | | This patch adds support for ECMP hash policy choice via a new sysctl called fib_multipath_hash_policy and also adds support for L4 hashes. The current values for fib_multipath_hash_policy are: 0 - layer 3 (default) 1 - layer 4 If there's an skb hash already set and it matches the chosen policy then it will be used instead of being calculated (currently only for L4). In L3 mode we always calculate the hash due to the ICMP error special case, the flow dissector's field consistentification should handle the address order thus we can remove the address reversals. If the skb is provided we always use it for the hash calculation, otherwise we fallback to fl4, that is if skb is NULL fl4 has to be set. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: inet: Support UID-based routing in IP protocols.Lorenzo Colitti2016-11-041-2/+3
| | | | | | | | | | | | | | | | | | | | | | | - Use the UID in routing lookups made by protocol connect() and sendmsg() functions. - Make sure that routing lookups triggered by incoming packets (e.g., Path MTU discovery) take the UID of the socket into account. - For packets not associated with a userspace socket, (e.g., ping replies) use UID 0 inside the user namespace corresponding to the network namespace the socket belongs to. This allows all namespaces to apply routing and iptables rules to kernel-originated traffic in that namespaces by matching UID 0. This is better than using the UID of the kernel socket that is sending the traffic, because the UID of kernel sockets created at namespace creation time (e.g., the per-processor ICMP and TCP sockets) is the UID of the user that created the socket, which might not be mapped in the namespace. Tested: compiles allnoconfig, allyesconfig, allmodconfig Tested: https://android-review.googlesource.com/253302 Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ipv4: Remove l3mdev_get_saddrDavid Ahern2016-09-101-10/+0
| | | | | | | No longer needed Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-04-231-0/+3
|\ | | | | | | | | | | | | | | | | | | | | Conflicts were two cases of simple overlapping changes, nothing serious. In the UDP case, we need to add a hlist_add_tail_rcu() to linux/rculist.h, because we've moved UDP socket handling away from using nulls lists. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: vrf: Fix dst reference countingDavid Ahern2016-04-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Vivek reported a kernel exception deleting a VRF with an active connection through it. The root cause is that the socket has a cached reference to a dst that is destroyed. Converting the dst_destroy to dst_release and letting proper reference counting kick in does not work as the dst has a reference to the device which needs to be released as well. I talked to Hannes about this at netdev and he pointed out the ipv4 and ipv6 dst handling has dst_ifdown for just this scenario. Rather than continuing with the reinvented dst wheel in VRF just remove it and leverage the ipv4 and ipv6 versions. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Checks skb_dst to be NULL in inet_iifTom Herbert2016-04-071-3/+4
|/ | | | | | | | | | | | In inet_iif check if skb_rtable is NULL for the skb and return skb->skb_iif if it is. This change allows inet_iif to be called before the dst information has been set in the skb (e.g. when doing socket based UDP GRO). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: Namespaceify ip_default_ttl sysctl knobNikolay Borisov2016-02-161-3/+2
| | | | | Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Propagate lookup failure in l3mdev_get_saddr to callerDavid Ahern2016-01-041-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | Commands run in a vrf context are not failing as expected on a route lookup: root@kenny:~# ip ro ls table vrf-red unreachable default root@kenny:~# ping -I vrf-red -c1 -w1 10.100.1.254 ping: Warning: source address might be selected on device other than vrf-red. PING 10.100.1.254 (10.100.1.254) from 0.0.0.0 vrf-red: 56(84) bytes of data. --- 10.100.1.254 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 999ms Since the vrf table does not have a route for 10.100.1.254 the ping should have failed. The saddr lookup causes a full VRF table lookup. Propogating a lookup failure to the user allows the command to fail as expected: root@kenny:~# ping -I vrf-red -c1 -w1 10.100.1.254 connect: No route to host Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add source address lookup op for VRFDavid Ahern2015-10-071-3/+4
| | | | | | | | | Add operation to l3mdev to lookup source address for a given flow. Add support for the operation to VRF driver and convert existing IPv4 hooks to use the new lookup. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Rename FLOWI_FLAG_VRFSRC to FLOWI_FLAG_L3MDEV_SRCDavid Ahern2015-10-071-1/+1
| | | | | Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: ICMP packet inspection for multipathPeter Nørlund2015-10-051-1/+10
| | | | | | | | | ICMP packets are inspected to let them route together with the flow they belong to, minimizing the chance that a problematic path will affect flows on other paths, and so that anycast environments can work with ECMP. Signed-off-by: Peter Nørlund <pch@ordbogen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Move netif_index_is_l3_master to l3mdev.hDavid Ahern2015-09-291-0/+1
| | | | | | | Change CONFIG dependency to CONFIG_NET_L3_MASTER_DEV as well. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Rename IFF_VRF_MASTER to IFF_L3MDEV_MASTERDavid Ahern2015-09-291-1/+1
| | | | | | | | Rename IFF_VRF_MASTER to IFF_L3MDEV_MASTER and update the name of the netif_is_vrf and netif_index_is_vrf macros. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-09-261-1/+1
|\ | | | | | | | | | | | | | | | | | | Conflicts: net/ipv4/arp.c The net/ipv4/arp.c conflict was one commit adding a new local variable while another commit was deleting one. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: Fix vti use case with oif in dst lookupsDavid Ahern2015-09-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Steffen reported that the recent change to add oif to dst lookups breaks the VTI use case. The problem is that with the oif set in the flow struct the comparison to the nh_oif is triggered. Fix by splitting the FLOWI_FLAG_VRFSRC into 2 flags -- one that triggers the vrf device cache bypass (FLOWI_FLAG_VRFSRC) and another telling the lookup to not compare nh oif (FLOWI_FLAG_SKIP_NH_OIF). Fixes: 42a7b32b73d6 ("xfrm: Add oif to dst lookups") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | inet: constify ip_route_output_flow() socket argumentEric Dumazet2015-09-251-1/+1
| | | | | | | | | | | | | | | | | | | | Very soon, TCP stack might call inet_csk_route_req(), which calls inet_csk_route_req() with an unlocked listener socket, so we need to make sure ip_route_output_flow() is not trying to change any field from its socket argument. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Add FIB table id to rtableDavid Ahern2015-09-151-0/+2
|/ | | | | | | | Add the FIB table id to rtable to make the information available for IPv4 as it is for IPv6. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Make table id type u32David Ahern2015-09-011-1/+1
| | | | | | | | | | | | | | | | | A number of VRF patches used 'int' for table id. It should be u32 to be consistent with the rest of the stack. Fixes: 4e3c89920cd3a ("net: Introduce VRF related flags and helpers") 15be405eb2ea9 ("net: Add inet_addr lookup by table") 30bbaa1950055 ("net: Fix up inet_addr_type checks") 021dd3b8a142d ("net: Add routes to the table associated with the device") dc028da54ed35 ("inet: Move VRF table lookup to inlined function") f6d3c19274c74 ("net: FIB tracepoints") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* route: move lwtunnel state to dst_entryJiri Benc2015-08-201-1/+0
| | | | | | | | | | | | | | | Currently, the lwtunnel state resides in per-protocol data. This is a problem if we encapsulate ipv6 traffic in an ipv4 tunnel (or vice versa). The xmit function of the tunnel does not know whether the packet has been routed to it by ipv4 or ipv6, yet it needs the lwtstate data. Moving the lwtstate data to dst_entry makes such inter-protocol tunneling possible. As a bonus, this brings a nice diffstat. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Fix up inet_addr_type checksDavid Ahern2015-08-131-0/+3
| | | | | | | | | | | | | | | Currently inet_addr_type and inet_dev_addr_type expect local addresses to be in the local table. With the VRF device local routes for devices associated with a VRF will be in the table associated with the VRF. Provide an alternate inet_addr lookup to use a specific table rather than defaulting to the local table. inet_addr_type_dev_table keeps the same semantics as inet_addr_type but if the passed in device is enslaved to a VRF then the table for that VRF is used for the lookup. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add inet_addr lookup by tableDavid Ahern2015-08-131-0/+1
| | | | | | | | | | | | Currently inet_addr_type and inet_dev_addr_type expect local addresses to be in the local table. With the VRF device local routes for devices associated with a VRF will be in the table associated with the VRF. Provide an alternate inet_addr lookup to use a specific table rather than defaulting to the local table. Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Use VRF device index for lookups on TXDavid Ahern2015-08-131-0/+3
| | | | | | | | | | | | | As with ingress use the index of VRF master device for route lookups on egress. However, the oif should only be used to direct the lookups to a specific table. Routes in the table are not based on the VRF device but rather interfaces that are part of the VRF so do not consider the oif for lookups within the table. The FLOWI_FLAG_VRFSRC is used to control this latter part. Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: support for fib route lwtunnel encap attributesRoopa Prabhu2015-07-211-0/+1
| | | | | | | | | This patch adds support in ipv4 fib functions to parse user provided encap attributes and attach encap state data to fib_nh and rtable. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: per cpu uncached listEric Dumazet2015-01-151-0/+2
| | | | | | | | | | | | | | | RAW sockets with hdrinc suffer from contention on rt_uncached_lock spinlock. One solution is to use percpu lists, since most routes are destroyed by the cpu that created them. It is unclear why we even have to put these routes in uncached_list, as all outgoing packets should be freed when a device is dismantled. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: caacf05e5ad1 ("ipv4: Properly purge netdev references on uncached routes.") Signed-off-by: David S. Miller <davem@davemloft.net>
View Lorry Controller Status