summaryrefslogtreecommitdiff
path: root/include/uapi/linux/nl80211.h
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: Turn AQL into an NL80211_EXT_FEATUREToke Høiland-Jørgensen2019-12-131-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Instead of just having an airtime flag in debugfs, turn AQL into a proper NL80211_EXT_FEATURE, so drivers can turn it on when they are ready, and so we also expose the presence of the feature to userspace. This also has the effect of flipping the default, so drivers have to opt in to using AQL instead of getting it by default with TXQs. To keep functionality the same as pre-patch, we set this feature for ath10k (which is where it is needed the most). While we're at it, split out the debugfs interface so AQL gets its own per-station debugfs file instead of using the 'airtime' file. [Johannes:] This effectively disables AQL for iwlwifi, where it fixes a number of issues: * TSO in iwlwifi is causing underflows and associated warnings in AQL * HE (802.11ax) rates aren't reported properly so at HE rates, AQL could never have a valid estimate (it'd use 6 Mbps instead of up to 2400!) Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20191212111437.224294-1-toke@redhat.com Fixes: 3ace10f5b5ad ("mac80211: Implement Airtime-based Queue Limit (AQL)") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: VLAN offload support for set_key and set_sta_vlanGurumoorthi Gnanasambandhan2019-11-081-0/+26
| | | | | | | | | | | | | | | | | | This provides an alternative mechanism for AP VLAN support where a single netdev is used with VLAN tagged frames instead of separate netdevs for each VLAN without tagged frames from the WLAN driver. By setting NL80211_EXT_FEATURE_VLAN_OFFLOAD flag the driver indicates support for a single netdev with VLAN tagged frames. Separate VLAN-specific netdevs can be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to Ethernet. NL80211_CMD_NEW_KEY (for group keys), NL80211_CMD_NEW_STATION, and NL80211_CMD_SET_STATION will optionally specify vlan_id using NL80211_ATTR_VLAN_ID. Signed-off-by: Gurumoorthi Gnanasambandhan <gguru@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20191031214640.5012-1-jouni@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211: Document the expectation for NL80211_ATTR_IE in NL80211_CMD_CONNECTSunil Dutt2019-10-041-0/+8
| | | | | | | | | | | | | | | | | | This commit documents the expectation for NL80211_ATTR_IE when included in NL80211_CMD_CONNECT, as following. Driver shall not modify the IEs specified through NL80211_ATTR_IE if NL80211_ATTR_MAC is included. However, if NL80211_ATTR_MAC_HINT is included, these IEs through NL80211_ATTR_IE are specified by the user space based on the best possible BSS selected. Thus, if the driver ends up selecting a different BSS, it can modify these IEs accordingly (e.g. userspace asks the driver to perform PMKSA caching with BSS1 and the driver ends up selecting BSS2 with different PMKSA cache entry. RSNIE has to get updated with the apt PMKID). Signed-off-by: Sunil Dutt <usdutt@codeaurora.org> Link: https://lore.kernel.org/r/1568378504-15179-1-git-send-email-usdutt@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: add local BSS receive time to survey informationFelix Fietkau2019-08-301-0/+3
| | | | | | | | | | This is useful for checking how much airtime is being used up by other transmissions on the channel, e.g. by calculating (time_rx - time_bss_rx) or (time_busy - time_bss_rx - time_tx) Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20190828102042.58016-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211: Add support for EDMG channelsAlexei Avshalom Lazar2019-08-211-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | 802.11ay specification defines Enhanced Directional Multi-Gigabit (EDMG) STA and AP which allow channel bonding of 2 channels and more. Introduce new NL attributes that are needed for enabling and configuring EDMG support. Two new attributes are used by kernel to publish driver's EDMG capabilities to the userspace: NL80211_BAND_ATTR_EDMG_CHANNELS - bitmap field that indicates the 2.16 GHz channel(s) that are supported by the driver. When this attribute is not set it means driver does not support EDMG. NL80211_BAND_ATTR_EDMG_BW_CONFIG - represent the channel bandwidth configurations supported by the driver. Additional two new attributes are used by the userspace for connect command and for AP configuration: NL80211_ATTR_WIPHY_EDMG_CHANNELS NL80211_ATTR_WIPHY_EDMG_BW_CONFIG New rate info flag - RATE_INFO_FLAGS_EDMG, can be reported from driver and used for bitrate calculation that will take into account EDMG according to the 802.11ay specification. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Link: https://lore.kernel.org/r/1566138918-3823-2-git-send-email-ailizaro@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Support assoc-at timer in sta-infoBen Greear2019-08-211-0/+3
| | | | | | | | | | Report timestamp of when sta became associated. This is the boottime clock, units are nano-seconds. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20190809180001.26393-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211: add 6GHz band definition to enum nl80211_bandArend van Spriel2019-08-211-0/+2
| | | | | | | | | | | | In the 802.11ax specification a new band is introduced, which is also proposed by FCC for unlicensed use. This band is referred to as 6GHz spanning frequency range from 5925 to 7125 MHz. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-2-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: add support for parsing OBBS_PD attributesJohn Crispin2019-07-311-0/+27
| | | | | | | | | Add the data structure, policy and parsing code allowing userland to send the OBSS PD information into the kernel. Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190730163701.18836-2-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211: document uapi for CMD_FRAME_WAIT_CANCELDenis Kenzior2019-07-261-1/+3
| | | | | | | | | | | Commit 1c38c7f22068 ("nl80211: send event when CMD_FRAME duration expires") added the possibility of NL80211_CMD_FRAME_WAIT_CANCEL being sent whenever the off-channel wait time associated with a CMD_FRAME completes. Document this in the uapi/linux/nl80211.h file. Signed-off-by: Denis Kenzior <denkenz@gmail.com> Link: https://lore.kernel.org/r/20190722113312.14031-1-denkenz@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211: fix NL80211_HE_MAX_CAPABILITY_LENJohn Crispin2019-07-201-1/+1
| | | | | | | | | NL80211_HE_MAX_CAPABILITY_LEN has changed between D2.0 and D4.0. It is now MAC (6) + PHY (11) + MCS (12) + PPE (25) = 54. Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190627095832.19445-1-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2019-07-081-1/+1
|\ | | | | | | | | | | Two cases of overlapping changes, nothing fancy. Signed-off-by: David S. Miller <davem@davemloft.net>
| * nl80211: Fix undefined behavior in bit shiftJiunn Chang2019-06-281-1/+1
| | | | | | | | | | | | | | | | Shifting signed 32-bit value by 31 bits is undefined. Changing most significant bit to unsigned. Signed-off-by: Jiunn Chang <c0d1n61at3@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | mac80211: allow turning TWT responder support on and off via netlinkJohn Crispin2019-06-141-0/+4
| | | | | | | | | | | | | | | | | | Allow the userland daemon to en/disable TWT support for an AP. Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: John Crispin <john@phrozen.org> [simplify parsing code] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | nl80211: add support for SAE authentication offloadChung-Hsien Hsu2019-06-141-0/+19
| | | | | | | | | | | | | | | | | | Let drivers advertise support for station-mode SAE authentication offload with a new NL80211_EXT_FEATURE_SAE_OFFLOAD flag. Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | nl80211: add WPA3 definition for SAE authenticationChung-Hsien Hsu2019-06-141-0/+1
|/ | | | | | | | Add definition of WPA version 3 for SAE authentication. Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: add support to probe unexercised mesh linkRajkumar Manoharan2019-04-261-0/+17
| | | | | | | | | | | | | | Adding support to allow mesh HWMP to measure link metrics on unexercised direct mesh path by sending some data frames to other mesh points which are not currently selected as a primary traffic path but only 1 hop away. The absence of the primary path to the chosen node makes it necessary to apply some form of marking on a chosen packet stream so that the packets can be properly steered to the selected node for testing, and not by the regular mesh path lookup. Tested-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Add support to set tx power for a station associatedAshok Raj Nagarajan2019-04-261-0/+15
| | | | | | | | | | | | | | This patch adds support to set transmit power setting type and transmit power level attributes to NL80211_CMD_SET_STATION in order to facilitate adjusting the transmit power level of a station associated to the AP. The added attributes allow selection of automatic and limited transmit power level, with the level defined in dBm format. Co-developed-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Ashok Raj Nagarajan <arnagara@codeaurora.org> Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211/cfg80211: Extended Key ID supportAlexander Wetzel2019-04-261-0/+28
| | | | | | | | | | | | Add support for IEEE 802.11-2016 "Extended Key ID for Individually Addressed Frames". Extend cfg80211 and nl80211 to allow pairwise keys to be installed for Rx only, enable Tx separately and allow Key ID 1 for pairwise keys. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> [use NLA_POLICY_RANGE() for NL80211_KEY_MODE] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211: increase NL80211_MAX_SUPP_REG_RULESShaul Triebitz2019-04-261-2/+2
| | | | | | | | | | The iwlwifi driver creates one rule per channel, thus it needs more rules than normal. To solve this, increase NL80211_MAX_SUPP_REG_RULES so iwlwifi can also fit UHB (ultra high band) channels. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211/nl80211: Offload OWE processing to user space in AP modeSunil Dutt2019-04-081-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This interface allows the host driver to offload OWE processing to user space. This intends to support OWE (Opportunistic Wireless Encryption) AKM by the drivers that implement SME but rely on the user space for the cryptographic/OWE processing in AP mode. Such drivers are not capable of processing/deriving the DH IE. A new NL80211 command - NL80211_CMD_UPDATE_OWE_INFO is introduced to send the request/event between the host driver and user space. Driver shall provide the OWE info (MAC address and DH IE) of the peer to user space for cryptographic processing of the DH IE through the event. Accordingly, the user space shall update the OWE info/DH IE to the driver. Following is the sequence in AP mode for OWE authentication. Driver passes the OWE info obtained from the peer in the Association Request to the user space through the event cfg80211_update_owe_info_event. User space shall process the OWE info received and generate new OWE info. This OWE info is passed to the driver through NL80211_CMD_UPDATE_OWE_INFO request. Driver eventually uses this OWE info to send the Association Response to the peer. This OWE info in the command interface carries the IEs that include PMKID of the peer if the PMKSA is still valid or an updated DH IE for generating a new PMKSA with the peer. Signed-off-by: Liangwei Dong <liangwei@codeaurora.org> Signed-off-by: Sunil Dutt <usdutt@codeaurora.org> Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org> [remove policy initialization - no longer exists] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: Add support for NL80211_STA_INFO_AIRTIME_LINK_METRICNarayanraddi Masti2019-04-081-0/+2
| | | | | | | | Add support for mesh airtime link metric attribute NL80211_STA_INFO_AIRTIME_LINK_METRIC. Signed-off-by: Narayanraddi Masti <team.nmasti@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211/cfg80211: Specify band specific min RSSI thresholds with sched scanvamsi krishna2019-04-081-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | This commit adds the support to specify the RSSI thresholds per band for each match set. This enhances the current behavior which specifies a single rssi_threshold across all the bands by introducing the rssi_threshold_per_band. These per band rssi thresholds are referred through NL80211_BAND_* (enum nl80211_band) variables as attribute types. Such attributes/values per each band are nested through NL80211_ATTR_SCHED_SCAN_MIN_RSSI. These band specific rssi thresholds shall take precedence over the current rssi_thold per match set. Drivers indicate this support through %NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD. These per band rssi attributes/values does not specify "default RSSI filter" as done by NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to stay backward compatible. That said, these per band rssi values have to be specified for the corresponding matchset. Signed-off-by: vamsi krishna <vamsin@codeaurora.org> Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org> [rebase on refactoring, add policy] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211: Allow set/del pmksa operations for APLiangwei Dong2019-01-251-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Host drivers may offload authentication to the user space through the commit ("cfg80211: Authentication offload to user space in AP mode"). This interface can be used to implement SAE by having the userspace do authentication/PMKID key derivation and driver handle the association. A step ahead, this interface can get further optimized if the PMKID is passed to the host driver and also have it respond to the association request by the STA on a valid PMKID. This commit enables the userspace to pass the PMKID to the host drivers through the set/del pmksa operations in AP mode. Set/Del pmksa is now restricted to STA/P2P client mode only and thus the drivers might not expect them in any other(AP) mode. This commit also introduces a feature flag NL80211_EXT_FEATURE_AP_PMKSA_CACHING (johannes: renamed) to maintain the backward compatibility of such an expectation by the host drivers. These operations are allowed in AP mode only when the drivers advertize the capability through this flag. Signed-off-by: Liangwei Dong <liangwei@codeaurora.org> Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org> [rename flag to NL80211_EXT_FEATURE_AP_PMKSA_CACHING] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Authentication offload to user space in AP modeSrinivas Dasari2019-01-251-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 40cbfa90218b ("cfg80211/nl80211: Optional authentication offload to userspace")' introduced authentication offload to user space by the host drivers in station mode. This commit extends the same for the AP mode too. Extend NL80211_ATTR_EXTERNAL_AUTH_SUPPORT to also claim the support of external authentication from the user space in AP mode. A new flag parameter is introduced in cfg80211_ap_settings to intend the same while "start ap". Host driver to use NL80211_CMD_FRAME interface to transmit and receive the authentication frames to / from the user space. Host driver to indicate the flag NL80211_RXMGMT_FLAG_EXTERNAL_AUTH while sending the authentication frame to the user space. This intends to the user space that the driver wishes it to process the authentication frame for certain protocols, though it had initially advertised the support for SME functionality. User space shall accordingly do the authentication and indicate its final status through the command NL80211_CMD_EXTERNAL_AUTH. Allow the command even if userspace doesn't include the attribute NL80211_ATTR_SSID for AP interface. Host driver shall continue with the association sequence and indicate the STA connection status through cfg80211_new_sta. To facilitate the host drivers in AP mode for matching the pmkid by the stations during the association, NL80211_CMD_EXTERNAL_AUTH is also enhanced to include the pmkid to drivers after the authentication. This pmkid can also be used in the STA mode to include in the association request. Also modify nl80211_external_auth to not mandate SSID in AP mode. Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org> [remove useless nla_get_flag() usage] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Allow drivers to advertise supported AKM suitesVeerendranath Jakkam2019-01-251-0/+6
| | | | | | | | | | | | | | | There was no such capability advertisement from the driver and thus the current user space has to assume the driver to support all the AKMs. While that may be the case with some drivers (e.g., mac80211-based ones), there are cfg80211-based drivers that implement SME and have constraints on which AKMs can be supported (e.g., such drivers may need an update to support SAE AKM using NL80211_CMD_EXTERNAL_AUTH). Allow such drivers to advertise the exact set of supported AKMs so that user space tools can determine what network profile options should be allowed to be configured. Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org> [pmsr data might be big, start a new netlink message section] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211/mac80211: mesh: add mesh path change count to mpath infoJulan Hsu2019-01-191-1/+3
| | | | | | | Expose path change count to destination in mpath info Signed-off-by: Julan Hsu <julanhsu@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211/mac80211: mesh: add hop count to mpath infoJulan Hsu2019-01-191-0/+2
| | | | | | | Expose hop count to destination information in mpath info Signed-off-by: Julan Hsu <julanhsu@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Add airtime statistics and settingsToke Høiland-Jørgensen2019-01-191-0/+15
| | | | | | | | | | | | | This adds TX airtime statistics to the cfg80211 station dump (to go along with the RX info already present), and adds a new parameter to set the airtime weight of each station. The latter allows userspace to implement policies for different stations by varying their weights. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> [rmanohar@codeaurora.org: fixed checkpatch warnings] Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> [move airtime weight != 0 check into policy] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211: Add support to notify radar event info received from STASriram R2018-12-181-0/+7
| | | | | | | | | | | | | | | | Currently radar detection and corresponding channel switch is handled at the AP device. STA ignores these detected radar events since the radar signal can be seen mostly by the AP as well. But in scenarios where a radar signal is seen only at STA, notifying this event to the AP which can trigger a channel switch can be useful. Stations can report such radar events autonomously through Spectrum management (Measurement Report) action frame to its AP. The userspace on processing the report can notify the kernel with the use of the added NL80211_CMD_NOTIFY_RADAR to indicate the detected event and inturn adding the reported channel to NOL. Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: clarify LCI/civic location documentationJohannes Berg2018-12-181-4/+12
| | | | | | | | The older code and current userspace assumed that this data is the content of the Measurement Report element, starting with the Measurement Token. Clarify this in the documentation. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* uapi/nl80211: fix spelling errorsStephen Hemminger2018-12-051-6/+6
| | | | | | | Spelling errors found by codespell Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* {nl,mac}80211: add dot11MeshConnectedToMeshGate to meshconfBob Copeland2018-11-091-1/+7
| | | | | | | | | | | | When userspace is controlling mesh routing, it may have better knowledge about whether a mesh STA is connected to a mesh gate than the kernel mpath table. Add dot11MeshConnectedToMeshGate to the mesh config so that such applications can explicitly signal that a mesh STA is connected to a gate, which will then be advertised in the beacon. Signed-off-by: Bob Copeland <bobcopeland@fb.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* {nl,mac}80211: report gate connectivity in station infoBob Copeland2018-11-091-0/+3
| | | | | | | | | | | Capture the current state of gate connectivity from the mesh formation field in mesh config whenever we receive a beacon, and report that via GET_STATION. This allows applications doing mesh peering in userspace to make peering decisions based on peers' current upstream connectivity. Signed-off-by: Bob Copeland <bobcopeland@fb.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: add peer measurement with FTM initiator APIJohannes Berg2018-11-091-0/+418
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211: Add per peer statistics to compute FCS error rateAnkita Bajaj2018-10-121-0/+8
| | | | | | | | | | | | | | | | | | | | Add support for drivers to report the total number of MPDUs received and the number of MPDUs received with an FCS error from a specific peer. These counters will be incremented only when the TA of the frame matches the MAC address of the peer irrespective of FCS error. It should be noted that the TA field in the frame might be corrupted when there is an FCS error and TA matching logic would fail in such cases. Hence, FCS error counter might not be fully accurate, but it can provide help in detecting bad RX links in significant number of cases. This FCS error counter without full accuracy can be used, e.g., to trigger a kick-out of a connected client with a bad link in AP mode to force such a client to roam to another AP. Signed-off-by: Ankita Bajaj <bankita@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: support FTM responder configuration/statisticsPradeep Kumar Chitrapu2018-10-021-0/+90
| | | | | | | | | | | | | | | | | Allow userspace to enable fine timing measurement responder functionality with configurable lci/civic parameters in AP mode. This can be done at AP start or changing beacon parameters. A new EXT_FEATURE flag is introduced for drivers to advertise the capability. Also nl80211 API support for retrieving statistics is added. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> [remove unused cfg80211_ftm_responder_params, clarify docs, move validation into policy] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211: Add CAN_REPLACE_PTK0 APIAlexander Wetzel2018-09-051-0/+6
| | | | | | | | | | | | | | | | | | | | Drivers able to correctly replace a in-use key should set @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 to allow the user space (e.g. hostapd or wpa_supplicant) to rekey PTK keys. The user space must detect a PTK rekey attempt and only go ahead with it when the driver has set this flag. If the driver is not supporting the feature the user space either must not replace the PTK key or perform a full re-association instead. Ignoring this flag and continuing to rekey the connection can still work but has to be considered insecure and broken. Depending on the driver it can leak clear text packets or freeze the connection and is only supported to allow the user space to be updated. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Reviewed-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: clarify frames covered by average ACK signal reportBalaji Pothunoori2018-08-291-7/+11
| | | | | | | | | | | | | | | | | | | | Modify the API to include all ACK frames in average ACK signal strength reporting, not just ACKs for data frames. Make exposing the data conditional on implementing the extended feature flag. This is how it was really implemented in mac80211, update the code there to use the new defines and clean up some of the setting code. Keep nl80211.h source compatibility by keeping the old names. Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> [rewrite commit log, change compatibility to be old=new instead of the other way around, update kernel-doc, roll in mac80211 changes, make mac80211 depend on valid bit instead of HW flag] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: Add support for 60GHz band channels 5 and 6Alexei Avshalom Lazar2018-08-281-1/+1
| | | | | | | | | The current support in the 60GHz band is for channels 1-4. Add support for channels 5 and 6. This requires enlarging ieee80211_channel.center_freq from u16 to u32. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge tag 'mac80211-next-for-davem-2018-06-29' of ↵David S. Miller2018-06-301-1/+101
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Small merge conflict in net/mac80211/scan.c, I preserved the kcalloc() conversion. -DaveM Johannes Berg says: ==================== This round's updates: * finally some of the promised HE code, but it turns out to be small - but everything kept changing, so one part I did in the driver was >30 patches for what was ultimately <200 lines of code ... similar here for this code. * improved scan privacy support - can now specify scan flags for randomizing the sequence number as well as reducing the probe request element content * rfkill cleanups * a timekeeping cleanup from Arnd * various other cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * cfg80211: Add support for HELuca Coelho2018-06-151-1/+86
| | | | | | | | | | | | | | | | | | | | | | | | Add support for the HE in cfg80211 and also add userspace API to nl80211 to send rate information out, conforming with P802.11ax_D2.0. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
| * nl80211: add scan features for improved scan privacyJohannes Berg2018-06-151-0/+15
| | | | | | | | | | | | | | | | Add the scan flags for randomized SN and minimized probe request content for improved scan privacy. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
* | nl80211: fix some kernel doc tag mistakesLuca Coelho2018-06-151-14/+14
|/ | | | | | | | | There is a bunch of tags marking constants with &, which means struct or enum name. Replace them with %, which is the correct tag for constants. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2018-05-261-1/+1
|\ | | | | | | | | | | | | Lots of easy overlapping changes in the confict resolutions here. Signed-off-by: David S. Miller <davem@davemloft.net>
| * cfg80211: further limit wiphy names to 64 bytesEric Biggers2018-05-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | wiphy names were recently limited to 128 bytes by commit a7cfebcb7594 ("cfg80211: limit wiphy names to 128 bytes"). As it turns out though, this isn't sufficient because dev_vprintk_emit() needs the syslog header string "SUBSYSTEM=ieee80211\0DEVICE=+ieee80211:$devname" to fit into 128 bytes. This triggered the "device/subsystem name too long" WARN when the device name was >= 90 bytes. As before, this was reproduced by syzbot by sending an HWSIM_CMD_NEW_RADIO command to the MAC80211_HWSIM generic netlink family. Fix it by further limiting wiphy names to 64 bytes. Reported-by: syzbot+e64565577af34b3768dc@syzkaller.appspotmail.com Fixes: a7cfebcb7594 ("cfg80211: limit wiphy names to 128 bytes") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | nl80211: Update ERP info using NL80211_CMD_UPDATE_CONNECT_PARAMSVidyullatha Kanchanapally2018-05-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Use NL80211_CMD_UPDATE_CONNECT_PARAMS to update new ERP information, Association IEs and the Authentication type to driver / firmware which will be used in subsequent roamings. Signed-off-by: Vidyullatha Kanchanapally <vidyullatha@codeaurora.org> [arend: extended fils-sk kernel doc and added check in wiphy_register()] Reviewed-by: Jithu Jance <jithu.jance@broadcom.com> Reviewed-by: Eylon Pedinovsky <eylon.pedinovsky@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | nl80211: add FILS related parameters to ROAM eventArend Van Spriel2018-05-231-1/+2
| | | | | | | | | | | | | | | | | | | | In case of FILS shared key offload the parameters can change upon roaming of which user-space needs to be notified. Reviewed-by: Jithu Jance <jithu.jance@broadcom.com> Reviewed-by: Eylon Pedinovsky <eylon.pedinovsky@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | Merge remote-tracking branch 'net-next/master' into mac80211-nextJohannes Berg2018-05-231-0/+2
|\ \ | |/ | | | | | | | | | | Bring in net-next which had pulled in net, so I have the changes from mac80211 and can apply a patch that would otherwise conflict. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * cfg80211: limit wiphy names to 128 bytesJohannes Berg2018-04-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's currently no limit on wiphy names, other than netlink message size and memory limitations, but that causes issues when, for example, the wiphy name is used in a uevent, e.g. in rfkill where we use the same name for the rfkill instance, and then the buffer there is "only" 2k for the environment variables. This was reported by syzkaller, which used a 4k name. Limit the name to something reasonable, I randomly picked 128. Reported-by: syzbot+230d9e642a85d3fec29c@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | cfg80211: Expose TXQ stats and parameters to userspaceToke Høiland-Jørgensen2018-05-081-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | This adds support for exporting the mac80211 TXQ stats via nl80211 by way of a nested TXQ stats attribute, as well as for configuring the quantum and limits that were previously only changeable through debugfs. This commit adds just the nl80211 API, a subsequent commit adds support to mac80211 itself. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
View Lorry Controller Status