From 93e3a9e9993ef018522b7005d97d8124b7e73385 Mon Sep 17 00:00:00 2001 From: Sifan Naeem Date: Thu, 18 Jun 2015 13:27:12 +0100 Subject: spi: img-spfi: check for max speed supported by the spfi block Maximum speed supported by spfi is limited to 1/4 of the spfi clock. But in some SoCs the maximum speed supported by the spfi block can be limited to less than 1/4 of the spfi clock. In such cases we have to define the limit in the device tree so that the driver can pick it up. Signed-off-by: Sifan Naeem Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/spi/spi-img-spfi.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/spi/spi-img-spfi.txt b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt index e02fbf18c82c..494db6012d02 100644 --- a/Documentation/devicetree/bindings/spi/spi-img-spfi.txt +++ b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt @@ -21,6 +21,7 @@ Required properties: Optional properties: - img,supports-quad-mode: Should be set if the interface supports quad mode SPI transfers. +- spfi-max-frequency: Maximum speed supported by the spfi block. Example: -- cgit v1.2.1 From 54e7ad47c94d26614acb4fcc577a79b3347c2d86 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 16 Jul 2015 21:35:28 +0200 Subject: spi: mpc512x-psc: adapt mpc5121-psc document to reality MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The drivers support MPC5125 additionally to MPC5121, and there is an spi mode that is also supported. Additionally some minor corrections are done. Signed-off-by: Uwe Kleine-König Signed-off-by: Mark Brown --- .../bindings/powerpc/fsl/mpc5121-psc.txt | 24 ++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt index 8832e8798912..647817527c88 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt @@ -6,14 +6,14 @@ PSC in UART mode For PSC in UART mode the needed PSC serial devices are specified by fsl,mpc5121-psc-uart nodes in the fsl,mpc5121-immr SoC node. Additionally the PSC FIFO -Controller node fsl,mpc5121-psc-fifo is requered there: +Controller node fsl,mpc5121-psc-fifo is required there: -fsl,mpc5121-psc-uart nodes +fsl,mpc512x-psc-uart nodes -------------------------- Required properties : - - compatible : Should contain "fsl,mpc5121-psc-uart" and "fsl,mpc5121-psc" - - cell-index : Index of the PSC in hardware + - compatible : Should contain "fsl,-psc-uart" and "fsl,-psc" + Supported s: mpc5121, mpc5125 - reg : Offset and length of the register set for the PSC device - interrupts : where a is the interrupt number of the PSC FIFO Controller and b is a field that represents an @@ -25,12 +25,21 @@ Recommended properties : - fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4) - fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4) +PSC in SPI mode +--------------- -fsl,mpc5121-psc-fifo node +Similar to the UART mode a PSC can be operated in SPI mode. The compatible used +for that is fsl,mpc5121-psc-spi. It requires a fsl,mpc5121-psc-fifo as well. +The required and recommended properties are identical to the +fsl,mpc5121-psc-uart nodes, just use spi instead of uart in the compatible +string. + +fsl,mpc512x-psc-fifo node ------------------------- Required properties : - - compatible : Should be "fsl,mpc5121-psc-fifo" + - compatible : Should be "fsl,-psc-fifo" + Supported s: mpc5121, mpc5125 - reg : Offset and length of the register set for the PSC FIFO Controller - interrupts : where a is the interrupt number of the @@ -39,6 +48,9 @@ Required properties : - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. +Recommended properties : + - clocks : specifies the clock needed to operate the fifo controller + - clock-names : name(s) for the clock(s) listed in clocks Example for a board using PSC0 and PSC1 devices in serial mode: -- cgit v1.2.1 From 4b226fbde68b8bfb66452067523a677b8e6492fa Mon Sep 17 00:00:00 2001 From: Michael van der Westhuizen Date: Tue, 18 Aug 2015 22:21:52 +0200 Subject: dt: snps,dw-apb-ssi: Document new I/O data register width property This change documents a new property for the snps,dw-apb-ssi device, allowing an implementer to specify either four byte or two bytes access to the SPI controller data register. This supports a change that unbreaks this driver on picoXcell platforms. Signed-off-by: Michael van der Westhuizen Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt index bd99193e87b9..204b311e0400 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt @@ -10,6 +10,8 @@ Required properties: Optional properties: - cs-gpios : Specifies the gpio pis to be used for chipselects. - num-cs : The number of chipselects. If omitted, this will default to 4. +- reg-io-width : The I/O register width (in bytes) implemented by this + device. Supported values are 2 or 4 (the default). Child nodes as per the generic SPI binding. -- cgit v1.2.1