From bca12924f09dc03f2bda3b3e39408fee920a343b Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Tue, 16 Dec 2014 22:59:55 +0100
Subject: ARM: sunxi: DT: convert DTs to use common GPIOs includes

Replace the various raw GPIO flags by their definition in the common
dt-bindings header.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts')

diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index c00badd96cf9..ae3dd3953212 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -14,6 +14,8 @@
 /dts-v1/;
 #include "sun7i-a20.dtsi"
 #include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
@@ -37,7 +39,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -47,7 +49,7 @@
 			pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 11 0>; /* PH11 */
+			cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -221,7 +223,7 @@
 
 		green {
 			label = "a20-olinuxino-micro:green:usr";
-			gpios = <&pio 7 2 0>;
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
-- 
cgit v1.2.1