From a3cab1d2132474969871b5d7f915c5c0167b48b0 Mon Sep 17 00:00:00 2001 From: Sebastian Falbesoner Date: Mon, 21 Nov 2022 11:57:21 +0100 Subject: mmc: sdhci-esdhc-imx: correct CQHCI exit halt state check With the current logic the "failed to exit halt state" error would be shown even if any other bit than CQHCI_HALT was set in the CQHCI_CTL register, since the right hand side is always true. Fix this by using the correct operator (bit-wise instead of logical AND) to only check for the halt bit flag, which was obviously intended here. Fixes: 85236d2be844 ("mmc: sdhci-esdhc-imx: clear the HALT bit when enable CQE") Signed-off-by: Sebastian Falbesoner Acked-by: Haibo Chen Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221121105721.1903878-1-sebastian.falbesoner@gmail.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-esdhc-imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 31ea0a2fce35..ffeb5759830f 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -1512,7 +1512,7 @@ static void esdhc_cqe_enable(struct mmc_host *mmc) * system resume back. */ cqhci_writel(cq_host, 0, CQHCI_CTL); - if (cqhci_readl(cq_host, CQHCI_CTL) && CQHCI_HALT) + if (cqhci_readl(cq_host, CQHCI_CTL) & CQHCI_HALT) dev_err(mmc_dev(host->mmc), "failed to exit halt state when enable CQE\n"); -- cgit v1.2.1