From e6aac611b86956bdd981f30e8862ee2ac8aaf664 Mon Sep 17 00:00:00 2001 From: Michel JAOUEN Date: Tue, 22 May 2012 15:46:46 +0200 Subject: ab8500-btemp: Adaptation to AB8505 and AB9540 platforms Add AB9540 and AB8505 support to ABx500 BTEMP driver. Signed-off-by: Rajkumar Kasirajan Signed-off-by: Lee Jones Reviewed-by: Michel JAOUEN Reviewed-by: Marcus COOPER Reviewed-by: Jonas ABERG Tested-by: Michel JAOUEN Tested-by: Jonas ABERG --- drivers/power/ab8500_btemp.c | 67 +++++++++++++++++++++++++++++++++++--------- 1 file changed, 53 insertions(+), 14 deletions(-) (limited to 'drivers/power') diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c index 8ccf3590fd76..301a9ad3474d 100644 --- a/drivers/power/ab8500_btemp.c +++ b/drivers/power/ab8500_btemp.c @@ -39,6 +39,9 @@ #define BTEMP_BATCTRL_CURR_SRC_7UA 7 #define BTEMP_BATCTRL_CURR_SRC_20UA 20 +#define BTEMP_BATCTRL_CURR_SRC_16UA 16 +#define BTEMP_BATCTRL_CURR_SRC_18UA 18 + #define to_ab8500_btemp_device_info(x) container_of((x), \ struct ab8500_btemp, btemp_psy); @@ -212,10 +215,18 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di, /* Only do this for batteries with internal NTC */ if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) { - if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA) - curr = BAT_CTRL_7U_ENA; - else - curr = BAT_CTRL_20U_ENA; + + if (is_ab9540(di->parent) || is_ab8505(di->parent)) { + if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_16UA) + curr = BAT_CTRL_16U_ENA; + else + curr = BAT_CTRL_18U_ENA; + } else { + if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA) + curr = BAT_CTRL_7U_ENA; + else + curr = BAT_CTRL_20U_ENA; + } dev_dbg(di->dev, "Set BATCTRL %duA\n", di->curr_source); @@ -246,11 +257,22 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di, } else if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) { dev_dbg(di->dev, "Disable BATCTRL curr source\n"); - /* Write 0 to the curr bits */ - ret = abx500_mask_and_set_register_interruptible(di->dev, - AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, - BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA, - ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA)); + if (is_ab9540(di->parent) || is_ab8505(di->parent)) { + /* Write 0 to the curr bits */ + ret = abx500_mask_and_set_register_interruptible( + di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA, + ~(BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA)); + } else { + /* Write 0 to the curr bits */ + ret = abx500_mask_and_set_register_interruptible( + di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA, + ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA)); + } + if (ret) { dev_err(di->dev, "%s failed disabling current source\n", __func__); @@ -292,11 +314,20 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di, * if we got an error above */ disable_curr_source: - /* Write 0 to the curr bits */ - ret = abx500_mask_and_set_register_interruptible(di->dev, + if (is_ab9540(di->parent) || is_ab8505(di->parent)) { + /* Write 0 to the curr bits */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA, + ~(BAT_CTRL_16U_ENA | BAT_CTRL_18U_ENA)); + } else { + /* Write 0 to the curr bits */ + ret = abx500_mask_and_set_register_interruptible(di->dev, AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA, ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA)); + } + if (ret) { dev_err(di->dev, "%s failed disabling current source\n", __func__); @@ -510,8 +541,11 @@ static int ab8500_btemp_id(struct ab8500_btemp *di) { int res; u8 i; + if (is_ab9540(di->parent) || is_ab8505(di->parent)) + di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA; + else + di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA; - di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA; di->bm->batt_id = BATTERY_UNKNOWN; res = ab8500_btemp_get_batctrl_res(di); @@ -549,8 +583,13 @@ static int ab8500_btemp_id(struct ab8500_btemp *di) */ if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && di->bm->batt_id == 1) { - dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n"); - di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA; + if (is_ab9540(di->parent) || is_ab8505(di->parent)) { + dev_dbg(di->dev, "Set BATCTRL current source to 16uA\n"); + di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA; + } else { + dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n"); + di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA; + } } return di->bm->batt_id; -- cgit v1.2.1