From 79c3dd8150fd5236d95766a9e662e3e932b462c9 Mon Sep 17 00:00:00 2001 From: Don Zickus Date: Thu, 3 Nov 2011 09:07:18 -0400 Subject: usb, xhci: Clear warm reset change event during init I noticed on my Panther Point system that I wasn't getting hotplug events for my usb3.0 disk on a usb3 port. I tracked it down to the fact that the system had the warm reset change bit still set. This seemed to block future events from being received, including a hotplug event. Clearing this bit during initialization allowed the hotplug event to be received and the disk to be recognized correctly. This patch should be backported to kernels as old as 2.6.39. Signed-off-by: Don Zickus Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/core/hub.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 96f05b29c9ad..79781461eec9 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -813,6 +813,12 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) USB_PORT_FEAT_C_PORT_LINK_STATE); } + if ((portchange & USB_PORT_STAT_C_BH_RESET) && + hub_is_superspeed(hub->hdev)) { + need_debounce_delay = true; + clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_BH_PORT_RESET); + } /* We can forget about a "removed" device when there's a * physical disconnect or the connect status changes. */ -- cgit v1.2.1