From c1aa45759e90b4204ab8bce027a925fc7c87d00a Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Sat, 20 Jun 2015 18:20:09 +0100 Subject: Btrfs: fix shrinking truncate when the no_holes feature is enabled If the no_holes feature is enabled, we attempt to shrink a file to a size that ends up in the middle of a hole and we don't have any file extent items in the fs/subvol tree that go beyond the new file size (or any ordered extents that will insert such file extent items), we end up not updating the inode's disk_i_size, we only update the inode's i_size. This means that after unmounting and mounting the filesystem, or after the inode is evicted and reloaded, its i_size ends up being incorrect (an inode's i_size is set to the disk_i_size field when an inode is loaded). This happens when btrfs_truncate_inode_items() doesn't find any file extent items to drop - in this case it never makes a call to btrfs_ordered_update_i_size() in order to update the inode's disk_i_size. Example reproducer: $ mkfs.btrfs -O no-holes -f /dev/sdd $ mount /dev/sdd /mnt # Create our test file with some data and durably persist it. $ xfs_io -f -c "pwrite -S 0xaa 0 128K" /mnt/foo $ sync # Append some data to the file, increasing its size, and leave a hole # between the old size and the start offset if the following write. So # our file gets a hole in the range [128Kb, 256Kb[. $ xfs_io -c "truncate 160K" /mnt/foo # We expect to see our file with a size of 160Kb, with the first 128Kb # of data all having the value 0xaa and the remaining 32Kb of data all # having the value 0x00. $ od -t x1 /mnt/foo 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0400000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 0500000 # Now cleanly unmount and mount again the filesystem. $ umount /mnt $ mount /dev/sdd /mnt # We expect to get the same result as before, a file with a size of # 160Kb, with the first 128Kb of data all having the value 0xaa and the # remaining 32Kb of data all having the value 0x00. $ od -t x1 /mnt/foo 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0400000 In the example above the file size/data do not match what they were before the remount. Fix this by always calling btrfs_ordered_update_i_size() with a size matching the size the file was truncated to if btrfs_truncate_inode_items() is not called for a log tree and no file extent items were dropped. This ensures the same behaviour as when the no_holes feature is not enabled. A test case for fstests follows soon. Signed-off-by: Filipe Manana --- fs/btrfs/inode.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'fs') diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index b33c0cf02668..e33dff356460 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4209,7 +4209,7 @@ int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans, u64 extent_num_bytes = 0; u64 extent_offset = 0; u64 item_end = 0; - u64 last_size = (u64)-1; + u64 last_size = new_size; u32 found_type = (u8)-1; int found_extent; int del_item; @@ -4493,8 +4493,7 @@ out: btrfs_abort_transaction(trans, root, ret); } error: - if (last_size != (u64)-1 && - root->root_key.objectid != BTRFS_TREE_LOG_OBJECTID) + if (root->root_key.objectid != BTRFS_TREE_LOG_OBJECTID) btrfs_ordered_update_i_size(inode, last_size, NULL); btrfs_free_path(path); -- cgit v1.2.1 From 497b4050e0eacd4c746dd396d14916b1e669849d Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Fri, 3 Jul 2015 08:36:11 +0100 Subject: Btrfs: fix memory leak in the extent_same ioctl We were allocating memory with memdup_user() but we were never releasing that memory. This affected pretty much every call to the ioctl, whether it deduplicated extents or not. This issue was reported on IRC by Julian Taylor and on the mailing list by Marcel Ritter, credit goes to them for finding the issue. Reported-by: Julian Taylor Reported-by: Marcel Ritter Cc: stable@vger.kernel.org Signed-off-by: Filipe Manana Reviewed-by: Mark Fasheh --- fs/btrfs/ioctl.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'fs') diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 5d91776e12a2..d38981567e4e 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -3090,7 +3090,7 @@ out_unlock: static long btrfs_ioctl_file_extent_same(struct file *file, struct btrfs_ioctl_same_args __user *argp) { - struct btrfs_ioctl_same_args *same; + struct btrfs_ioctl_same_args *same = NULL; struct btrfs_ioctl_same_extent_info *info; struct inode *src = file_inode(file); u64 off; @@ -3120,6 +3120,7 @@ static long btrfs_ioctl_file_extent_same(struct file *file, if (IS_ERR(same)) { ret = PTR_ERR(same); + same = NULL; goto out; } @@ -3190,6 +3191,7 @@ static long btrfs_ioctl_file_extent_same(struct file *file, out: mnt_drop_write_file(file); + kfree(same); return ret; } -- cgit v1.2.1 From d3efe08400317888f559bbedf0e42cd31575d0ef Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Fri, 3 Jul 2015 20:30:34 +0100 Subject: Btrfs: fix list transaction->pending_ordered corruption When we call btrfs_commit_transaction(), we splice the list "ordered" of our transaction handle into the transaction's "pending_ordered" list, but we don't re-initialize the "ordered" list of our transaction handle, this means it still points to the same elements it used to before the splice. Then we check if the current transaction's state is >= TRANS_STATE_COMMIT_START and if it is we end up calling btrfs_end_transaction() which simply splices again the "ordered" list of our handle into the transaction's "pending_ordered" list, leaving multiple pointers to the same ordered extents which results in list corruption when we are iterating, removing and freeing ordered extents at btrfs_wait_pending_ordered(), resulting in access to dangling pointers / use-after-free issues. Similarly, btrfs_end_transaction() can end up in some cases calling btrfs_commit_transaction(), and both did a list splice of the transaction handle's "ordered" list into the transaction's "pending_ordered" without re-initializing the handle's "ordered" list, resulting in exactly the same problem. This produces the following warning on a kernel with linked list debugging enabled: [109749.265416] ------------[ cut here ]------------ [109749.266410] WARNING: CPU: 7 PID: 324 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98() [109749.267969] list_del corruption. prev->next should be ffff8800ba087e20, but was fffffff8c1f7c35d (...) [109749.287505] Call Trace: [109749.288135] [] dump_stack+0x4f/0x7b [109749.298080] [] ? console_unlock+0x356/0x3a2 [109749.331605] [] warn_slowpath_common+0xa1/0xbb [109749.334849] [] ? __list_del_entry+0x5a/0x98 [109749.337093] [] warn_slowpath_fmt+0x46/0x48 [109749.337847] [] __list_del_entry+0x5a/0x98 [109749.338678] [] btrfs_wait_pending_ordered+0x46/0xdb [btrfs] [109749.340145] [] ? __btrfs_run_delayed_items+0x149/0x163 [btrfs] [109749.348313] [] btrfs_commit_transaction+0x36b/0xa10 [btrfs] [109749.349745] [] ? trace_hardirqs_on+0xd/0xf [109749.350819] [] btrfs_sync_file+0x36f/0x3fc [btrfs] [109749.351976] [] vfs_fsync_range+0x8f/0x9e [109749.360341] [] vfs_fsync+0x1c/0x1e [109749.368828] [] do_fsync+0x34/0x4e [109749.369790] [] SyS_fsync+0x10/0x14 [109749.370925] [] system_call_fastpath+0x12/0x6f [109749.382274] ---[ end trace 48e0d07f7c03d95a ]--- On a non-debug kernel this leads to invalid memory accesses, causing a crash. Fix this by using list_splice_init() instead of list_splice() in btrfs_commit_transaction() and btrfs_end_transaction(). Cc: stable@vger.kernel.org Fixes: 50d9aa99bd35 ("Btrfs: make sure logged extents complete in the current transaction V3" Signed-off-by: Filipe Manana Reviewed-by: David Sterba --- fs/btrfs/transaction.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'fs') diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index c0f18e7266b6..51e0f0d0053e 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -761,7 +761,7 @@ static int __btrfs_end_transaction(struct btrfs_trans_handle *trans, if (!list_empty(&trans->ordered)) { spin_lock(&info->trans_lock); - list_splice(&trans->ordered, &cur_trans->pending_ordered); + list_splice_init(&trans->ordered, &cur_trans->pending_ordered); spin_unlock(&info->trans_lock); } @@ -1866,7 +1866,7 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, } spin_lock(&root->fs_info->trans_lock); - list_splice(&trans->ordered, &cur_trans->pending_ordered); + list_splice_init(&trans->ordered, &cur_trans->pending_ordered); if (cur_trans->state >= TRANS_STATE_COMMIT_START) { spin_unlock(&root->fs_info->trans_lock); atomic_inc(&cur_trans->use_count); -- cgit v1.2.1 From cffc3374e567ef42954f3c7070b3fa83f20f9684 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Thu, 9 Jul 2015 13:13:44 +0100 Subject: Btrfs: fix order by which delayed references are run When we have an extent that got N references removed and N new references added in the same transaction, we must run the insertion of the references first because otherwise the last removed reference will remove the extent item from the extent tree, resulting in a failure for the insertions. This is a regression introduced in the 4.2-rc1 release and this fix just brings back the behaviour of selecting reference additions before any reference removals. The following test case for fstests reproduces the issue: seq=`basename $0` seqres=$RESULT_DIR/$seq echo "QA output created by $seq" tmp=/tmp/$$ status=1 # failure is the default! trap "_cleanup; exit \$status" 0 1 2 3 15 _cleanup() { _cleanup_flakey rm -f $tmp.* } # get standard environment, filters and checks . ./common/rc . ./common/filter . ./common/dmflakey # real QA test starts here _need_to_be_root _supported_fs btrfs _supported_os Linux _require_scratch _require_dm_flakey _require_cloner _require_metadata_journaling $SCRATCH_DEV rm -f $seqres.full _scratch_mkfs >>$seqres.full 2>&1 _init_flakey _mount_flakey # Create prealloc extent covering range [160K, 620K[ $XFS_IO_PROG -f -c "falloc 160K 460K" $SCRATCH_MNT/foo # Now write to the last 80K of the prealloc extent plus 40K to the unallocated # space that immediately follows it. This creates a new extent of 40K that spans # the range [620K, 660K[. $XFS_IO_PROG -c "pwrite -S 0xaa 540K 120K" $SCRATCH_MNT/foo | _filter_xfs_io # At this point, there are now 2 back references to the prealloc extent in our # extent tree. Both are for our file offset 160K and one relates to a file # extent item with a data offset of 0 and a length of 380K, while the other # relates to a file extent item with a data offset of 380K and a length of 80K. # Make sure everything done so far is durably persisted (all back references are # in the extent tree, etc). sync # Now clone all extents of our file that cover the offset 160K up to its eof # (660K at this point) into itself at offset 2M. This leaves a hole in the file # covering the range [660K, 2M[. The prealloc extent will now be referenced by # the file twice, once for offset 160K and once for offset 2M. The 40K extent # that follows the prealloc extent will also be referenced twice by our file, # once for offset 620K and once for offset 2M + 460K. $CLONER_PROG -s $((160 * 1024)) -d $((2 * 1024 * 1024)) -l 0 $SCRATCH_MNT/foo \ $SCRATCH_MNT/foo # Now create one new extent in our file with a size of 100Kb. It will span the # range [3M, 3M + 100K[. It also will cause creation of a hole spanning the # range [2M + 460K, 3M[. Our new file size is 3M + 100K. $XFS_IO_PROG -c "pwrite -S 0xbb 3M 100K" $SCRATCH_MNT/foo | _filter_xfs_io # At this point, there are now (in memory) 4 back references to the prealloc # extent. # # Two of them are for file offset 160K, related to file extent items # matching the file offsets 160K and 540K respectively, with data offsets of # 0 and 380K respectively, and with lengths of 380K and 80K respectively. # # The other two references are for file offset 2M, related to file extent items # matching the file offsets 2M and 2M + 380K respectively, with data offsets of # 0 and 380K respectively, and with lengths of 389K and 80K respectively. # # The 40K extent has 2 back references, one for file offset 620K and the other # for file offset 2M + 460K. # # The 100K extent has a single back reference and it relates to file offset 3M. # Now clone our 100K extent into offset 600K. That offset covers the last 20K # of the prealloc extent, the whole 40K extent and 40K of the hole starting at # offset 660K. $CLONER_PROG -s $((3 * 1024 * 1024)) -d $((600 * 1024)) -l $((100 * 1024)) \ $SCRATCH_MNT/foo $SCRATCH_MNT/foo # At this point there's only one reference to the 40K extent, at file offset # 2M + 460K, we have 4 references for the prealloc extent (2 for file offset # 160K and 2 for file offset 2M) and 2 references for the 100K extent (1 for # file offset 3M and a new one for file offset 600K). # Now fsync our file to make all its new data and metadata updates are durably # persisted and present if a power failure/crash happens after a successful # fsync and before the next transaction commit. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo echo "File digest before power failure:" md5sum $SCRATCH_MNT/foo | _filter_scratch # Silently drop all writes and ummount to simulate a crash/power failure. _load_flakey_table $FLAKEY_DROP_WRITES _unmount_flakey # Allow writes again, mount to trigger log replay and validate file contents. # During log replay, the btrfs delayed references implementation used to run the # deletion of back references before the addition of new back references, which # made the addition fail as it didn't find the key in the extent tree that it # was looking for. The failure triggered by this test was related to the 40K # extent, which got 1 reference dropped and 1 reference added during the fsync # log replay - when running the delayed references at transaction commit time, # btrfs was applying the deletion before the insertion, resulting in a failure # of the insertion that ended up turning the fs into read-only mode. _load_flakey_table $FLAKEY_ALLOW_WRITES _mount_flakey echo "File digest after log replay:" md5sum $SCRATCH_MNT/foo | _filter_scratch _unmount_flakey status=0 exit This issue turned the filesystem into read-only mode (current transaction aborted) and produced the following traces: [ 8247.578385] ------------[ cut here ]------------ [ 8247.579947] WARNING: CPU: 0 PID: 11341 at fs/btrfs/extent-tree.c:1547 lookup_inline_extent_backref+0x17d/0x45d [btrfs]() (...) [ 8247.601697] Call Trace: [ 8247.602222] [] dump_stack+0x4f/0x7b [ 8247.604320] [] warn_slowpath_common+0xa1/0xbb [ 8247.605488] [] ? lookup_inline_extent_backref+0x17d/0x45d [btrfs] [ 8247.608226] [] lookup_inline_extent_backref+0x17d/0x45d [btrfs] [ 8247.617061] [] insert_inline_extent_backref+0x41/0xb2 [btrfs] [ 8247.621856] [] __btrfs_inc_extent_ref+0x8c/0x20a [btrfs] [ 8247.624366] [] __btrfs_run_delayed_refs+0xb0c/0xd49 [btrfs] [ 8247.626176] [] btrfs_run_delayed_refs+0x6d/0x1d4 [btrfs] [ 8247.627435] [] ? __cache_free+0x4a7/0x4b6 [ 8247.628531] [] btrfs_commit_transaction+0x4c/0xa20 [btrfs] (...) [ 8247.648430] ---[ end trace 2461e55f92c2ac2d ]--- [ 8247.727263] WARNING: CPU: 3 PID: 11341 at fs/btrfs/extent-tree.c:2771 btrfs_run_delayed_refs+0xa4/0x1d4 [btrfs]() [ 8247.728954] BTRFS: Transaction aborted (error -5) (...) [ 8247.760866] Call Trace: [ 8247.761534] [] dump_stack+0x4f/0x7b [ 8247.764271] [] warn_slowpath_common+0xa1/0xbb [ 8247.767582] [] ? btrfs_run_delayed_refs+0xa4/0x1d4 [btrfs] [ 8247.769373] [] warn_slowpath_fmt+0x46/0x48 [ 8247.770836] [] btrfs_run_delayed_refs+0xa4/0x1d4 [btrfs] [ 8247.772532] [] ? __cache_free+0x4a7/0x4b6 [ 8247.773664] [] btrfs_commit_transaction+0x4c/0xa20 [btrfs] [ 8247.775047] [] ? trace_hardirqs_on+0xd/0xf [ 8247.776176] [] ? kmem_cache_free+0x12b/0x189 [ 8247.777427] [] btrfs_recover_log_trees+0x2da/0x33d [btrfs] [ 8247.778575] [] ? replay_one_extent+0x4fc/0x4fc [btrfs] [ 8247.779838] [] open_ctree+0x1cc0/0x201a [btrfs] [ 8247.781020] [] ? register_shrinker+0x56/0x81 [ 8247.782285] [] btrfs_mount+0x5f0/0x734 [btrfs] (...) [ 8247.793394] ---[ end trace 2461e55f92c2ac2e ]--- [ 8247.794276] BTRFS: error (device dm-0) in btrfs_run_delayed_refs:2771: errno=-5 IO failure [ 8247.797335] BTRFS: error (device dm-0) in btrfs_replay_log:2375: errno=-5 IO failure (Failed to recover log tree) Fixes: c6fc24549960 ("btrfs: delayed-ref: Use list to replace the ref_root in ref_head.") Signed-off-by: Filipe Manana Acked-by: Qu Wenruo --- fs/btrfs/extent-tree.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'fs') diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 1c2bd1723e40..171312d51799 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2296,9 +2296,22 @@ static int run_one_delayed_ref(struct btrfs_trans_handle *trans, static inline struct btrfs_delayed_ref_node * select_delayed_ref(struct btrfs_delayed_ref_head *head) { + struct btrfs_delayed_ref_node *ref; + if (list_empty(&head->ref_list)) return NULL; + /* + * Select a delayed ref of type BTRFS_ADD_DELAYED_REF first. + * This is to prevent a ref count from going down to zero, which deletes + * the extent item from the extent tree, when there still are references + * to add, which would fail because they would not find the extent item. + */ + list_for_each_entry(ref, &head->ref_list, list) { + if (ref->action == BTRFS_ADD_DELAYED_REF) + return ref; + } + return list_entry(head->ref_list.next, struct btrfs_delayed_ref_node, list); } -- cgit v1.2.1 From ed958762644b404654a6f5d23e869f496fe127c6 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Tue, 14 Jul 2015 16:09:39 +0100 Subject: Btrfs: fix file corruption after cloning inline extents Using the clone ioctl (or extent_same ioctl, which calls the same extent cloning function as well) we end up allowing copy an inline extent from the source file into a non-zero offset of the destination file. This is something not expected and that the btrfs code is not prepared to deal with - all inline extents must be at a file offset equals to 0. For example, the following excerpt of a test case for fstests triggers a crash/BUG_ON() on a write operation after an inline extent is cloned into a non-zero offset: _scratch_mkfs >>$seqres.full 2>&1 _scratch_mount # Create our test files. File foo has the same 2K of data at offset 4K # as file bar has at its offset 0. $XFS_IO_PROG -f -s -c "pwrite -S 0xaa 0 4K" \ -c "pwrite -S 0xbb 4k 2K" \ -c "pwrite -S 0xcc 8K 4K" \ $SCRATCH_MNT/foo | _filter_xfs_io # File bar consists of a single inline extent (2K size). $XFS_IO_PROG -f -s -c "pwrite -S 0xbb 0 2K" \ $SCRATCH_MNT/bar | _filter_xfs_io # Now call the clone ioctl to clone the extent of file bar into file # foo at its offset 4K. This made file foo have an inline extent at # offset 4K, something which the btrfs code can not deal with in future # IO operations because all inline extents are supposed to start at an # offset of 0, resulting in all sorts of chaos. # So here we validate that clone ioctl returns an EOPNOTSUPP, which is # what it returns for other cases dealing with inlined extents. $CLONER_PROG -s 0 -d $((4 * 1024)) -l $((2 * 1024)) \ $SCRATCH_MNT/bar $SCRATCH_MNT/foo # Because of the inline extent at offset 4K, the following write made # the kernel crash with a BUG_ON(). $XFS_IO_PROG -c "pwrite -S 0xdd 6K 2K" $SCRATCH_MNT/foo | _filter_xfs_io status=0 exit The stack trace of the BUG_ON() triggered by the last write is: [152154.035903] ------------[ cut here ]------------ [152154.036424] kernel BUG at mm/page-writeback.c:2286! [152154.036424] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [152154.036424] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse parport_pc acpi_cpu$ [152154.036424] CPU: 2 PID: 17873 Comm: xfs_io Tainted: G W 4.1.0-rc6-btrfs-next-11+ #2 [152154.036424] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20150316_085822-nilsson.home.kraxel.org 04/01/2014 [152154.036424] task: ffff880429f70990 ti: ffff880429efc000 task.ti: ffff880429efc000 [152154.036424] RIP: 0010:[] [] clear_page_dirty_for_io+0x1e/0x90 [152154.036424] RSP: 0018:ffff880429effc68 EFLAGS: 00010246 [152154.036424] RAX: 0200000000000806 RBX: ffffea0006a6d8f0 RCX: 0000000000000001 [152154.036424] RDX: 0000000000000000 RSI: ffffffff81155d1b RDI: ffffea0006a6d8f0 [152154.036424] RBP: ffff880429effc78 R08: ffff8801ce389fe0 R09: 0000000000000001 [152154.036424] R10: 0000000000002000 R11: ffffffffffffffff R12: ffff8800200dce68 [152154.036424] R13: 0000000000000000 R14: ffff8800200dcc88 R15: ffff8803d5736d80 [152154.036424] FS: 00007fbf119f6700(0000) GS:ffff88043d280000(0000) knlGS:0000000000000000 [152154.036424] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [152154.036424] CR2: 0000000001bdc000 CR3: 00000003aa555000 CR4: 00000000000006e0 [152154.036424] Stack: [152154.036424] ffff8803d5736d80 0000000000000001 ffff880429effcd8 ffffffffa04e97c1 [152154.036424] ffff880429effd68 ffff880429effd60 0000000000000001 ffff8800200dc9c8 [152154.036424] 0000000000000001 ffff8800200dcc88 0000000000000000 0000000000001000 [152154.036424] Call Trace: [152154.036424] [] lock_and_cleanup_extent_if_need+0x147/0x18d [btrfs] [152154.036424] [] __btrfs_buffered_write+0x245/0x4c8 [btrfs] [152154.036424] [] ? btrfs_file_write_iter+0x150/0x3e0 [btrfs] [152154.036424] [] ? btrfs_file_write_iter+0x15f/0x3e0 [btrfs] [152154.036424] [] btrfs_file_write_iter+0x2cc/0x3e0 [btrfs] [152154.036424] [] __vfs_write+0x7c/0xa5 [152154.036424] [] vfs_write+0xa0/0xe4 [152154.036424] [] SyS_pwrite64+0x64/0x82 [152154.036424] [] system_call_fastpath+0x12/0x6f [152154.036424] Code: 48 89 c7 e8 0f ff ff ff 5b 41 5c 5d c3 0f 1f 44 00 00 55 48 89 e5 41 54 53 48 89 fb e8 ae ef 00 00 49 89 c4 48 8b 03 a8 01 75 02 <0f> 0b 4d 85 e4 74 59 49 8b 3c 2$ [152154.036424] RIP [] clear_page_dirty_for_io+0x1e/0x90 [152154.036424] RSP [152154.242621] ---[ end trace e3d3376b23a57041 ]--- Fix this by returning the error EOPNOTSUPP if an attempt to copy an inline extent into a non-zero offset happens, just like what is done for other scenarios that would require copying/splitting inline extents, which were introduced by the following commits: 00fdf13a2e9f ("Btrfs: fix a crash of clone with inline extents's split") 3f9e3df8da3c ("btrfs: replace error code from btrfs_drop_extents") Cc: stable@vger.kernel.org Signed-off-by: Filipe Manana --- fs/btrfs/ioctl.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'fs') diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index d38981567e4e..0770c91586ca 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -3588,6 +3588,20 @@ process_slot: u64 trim = 0; u64 aligned_end = 0; + /* + * Don't copy an inline extent into an offset + * greater than zero. Having an inline extent + * at such an offset results in chaos as btrfs + * isn't prepared for such cases. Just skip + * this case for the same reasons as commented + * at btrfs_ioctl_clone(). + */ + if (last_dest_end > 0) { + ret = -EOPNOTSUPP; + btrfs_end_transaction(trans, root); + goto out; + } + if (off > key.offset) { skip = off - key.offset; new_key.offset += skip; -- cgit v1.2.1