From 607ca46e97a1b6594b29647d98a32d545c24bdff Mon Sep 17 00:00:00 2001 From: David Howells Date: Sat, 13 Oct 2012 10:46:48 +0100 Subject: UAPI: (Scripted) Disintegrate include/linux Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones --- include/linux/mtio.h | 208 --------------------------------------------------- 1 file changed, 208 deletions(-) delete mode 100644 include/linux/mtio.h (limited to 'include/linux/mtio.h') diff --git a/include/linux/mtio.h b/include/linux/mtio.h deleted file mode 100644 index 18543e2db06f..000000000000 --- a/include/linux/mtio.h +++ /dev/null @@ -1,208 +0,0 @@ -/* - * linux/mtio.h header file for Linux. Written by H. Bergman - * - * Modified for special ioctls provided by zftape in September 1997 - * by C.-J. Heine. - */ - -#ifndef _LINUX_MTIO_H -#define _LINUX_MTIO_H - -#include -#include - -/* - * Structures and definitions for mag tape io control commands - */ - -/* structure for MTIOCTOP - mag tape op command */ -struct mtop { - short mt_op; /* operations defined below */ - int mt_count; /* how many of them */ -}; - -/* Magnetic Tape operations [Not all operations supported by all drivers]: */ -#define MTRESET 0 /* +reset drive in case of problems */ -#define MTFSF 1 /* forward space over FileMark, - * position at first record of next file - */ -#define MTBSF 2 /* backward space FileMark (position before FM) */ -#define MTFSR 3 /* forward space record */ -#define MTBSR 4 /* backward space record */ -#define MTWEOF 5 /* write an end-of-file record (mark) */ -#define MTREW 6 /* rewind */ -#define MTOFFL 7 /* rewind and put the drive offline (eject?) */ -#define MTNOP 8 /* no op, set status only (read with MTIOCGET) */ -#define MTRETEN 9 /* retension tape */ -#define MTBSFM 10 /* +backward space FileMark, position at FM */ -#define MTFSFM 11 /* +forward space FileMark, position at FM */ -#define MTEOM 12 /* goto end of recorded media (for appending files). - * MTEOM positions after the last FM, ready for - * appending another file. - */ -#define MTERASE 13 /* erase tape -- be careful! */ - -#define MTRAS1 14 /* run self test 1 (nondestructive) */ -#define MTRAS2 15 /* run self test 2 (destructive) */ -#define MTRAS3 16 /* reserved for self test 3 */ - -#define MTSETBLK 20 /* set block length (SCSI) */ -#define MTSETDENSITY 21 /* set tape density (SCSI) */ -#define MTSEEK 22 /* seek to block (Tandberg, etc.) */ -#define MTTELL 23 /* tell block (Tandberg, etc.) */ -#define MTSETDRVBUFFER 24 /* set the drive buffering according to SCSI-2 */ - /* ordinary buffered operation with code 1 */ -#define MTFSS 25 /* space forward over setmarks */ -#define MTBSS 26 /* space backward over setmarks */ -#define MTWSM 27 /* write setmarks */ - -#define MTLOCK 28 /* lock the drive door */ -#define MTUNLOCK 29 /* unlock the drive door */ -#define MTLOAD 30 /* execute the SCSI load command */ -#define MTUNLOAD 31 /* execute the SCSI unload command */ -#define MTCOMPRESSION 32/* control compression with SCSI mode page 15 */ -#define MTSETPART 33 /* Change the active tape partition */ -#define MTMKPART 34 /* Format the tape with one or two partitions */ -#define MTWEOFI 35 /* write an end-of-file record (mark) in immediate mode */ - -/* structure for MTIOCGET - mag tape get status command */ - -struct mtget { - long mt_type; /* type of magtape device */ - long mt_resid; /* residual count: (not sure) - * number of bytes ignored, or - * number of files not skipped, or - * number of records not skipped. - */ - /* the following registers are device dependent */ - long mt_dsreg; /* status register */ - long mt_gstat; /* generic (device independent) status */ - long mt_erreg; /* error register */ - /* The next two fields are not always used */ - __kernel_daddr_t mt_fileno; /* number of current file on tape */ - __kernel_daddr_t mt_blkno; /* current block number */ -}; - - - -/* - * Constants for mt_type. Not all of these are supported, - * and these are not all of the ones that are supported. - */ -#define MT_ISUNKNOWN 0x01 -#define MT_ISQIC02 0x02 /* Generic QIC-02 tape streamer */ -#define MT_ISWT5150 0x03 /* Wangtek 5150EQ, QIC-150, QIC-02 */ -#define MT_ISARCHIVE_5945L2 0x04 /* Archive 5945L-2, QIC-24, QIC-02? */ -#define MT_ISCMSJ500 0x05 /* CMS Jumbo 500 (QIC-02?) */ -#define MT_ISTDC3610 0x06 /* Tandberg 6310, QIC-24 */ -#define MT_ISARCHIVE_VP60I 0x07 /* Archive VP60i, QIC-02 */ -#define MT_ISARCHIVE_2150L 0x08 /* Archive Viper 2150L */ -#define MT_ISARCHIVE_2060L 0x09 /* Archive Viper 2060L */ -#define MT_ISARCHIVESC499 0x0A /* Archive SC-499 QIC-36 controller */ -#define MT_ISQIC02_ALL_FEATURES 0x0F /* Generic QIC-02 with all features */ -#define MT_ISWT5099EEN24 0x11 /* Wangtek 5099-een24, 60MB, QIC-24 */ -#define MT_ISTEAC_MT2ST 0x12 /* Teac MT-2ST 155mb drive, Teac DC-1 card (Wangtek type) */ -#define MT_ISEVEREX_FT40A 0x32 /* Everex FT40A (QIC-40) */ -#define MT_ISDDS1 0x51 /* DDS device without partitions */ -#define MT_ISDDS2 0x52 /* DDS device with partitions */ -#define MT_ISONSTREAM_SC 0x61 /* OnStream SCSI tape drives (SC-x0) - and SCSI emulated (DI, DP, USB) */ -#define MT_ISSCSI1 0x71 /* Generic ANSI SCSI-1 tape unit */ -#define MT_ISSCSI2 0x72 /* Generic ANSI SCSI-2 tape unit */ - -/* QIC-40/80/3010/3020 ftape supported drives. - * 20bit vendor ID + 0x800000 (see ftape-vendors.h) - */ -#define MT_ISFTAPE_UNKNOWN 0x800000 /* obsolete */ -#define MT_ISFTAPE_FLAG 0x800000 - - -/* structure for MTIOCPOS - mag tape get position command */ - -struct mtpos { - long mt_blkno; /* current block number */ -}; - - -/* mag tape io control commands */ -#define MTIOCTOP _IOW('m', 1, struct mtop) /* do a mag tape op */ -#define MTIOCGET _IOR('m', 2, struct mtget) /* get tape status */ -#define MTIOCPOS _IOR('m', 3, struct mtpos) /* get tape position */ - - -/* Generic Mag Tape (device independent) status macros for examining - * mt_gstat -- HP-UX compatible. - * There is room for more generic status bits here, but I don't - * know which of them are reserved. At least three or so should - * be added to make this really useful. - */ -#define GMT_EOF(x) ((x) & 0x80000000) -#define GMT_BOT(x) ((x) & 0x40000000) -#define GMT_EOT(x) ((x) & 0x20000000) -#define GMT_SM(x) ((x) & 0x10000000) /* DDS setmark */ -#define GMT_EOD(x) ((x) & 0x08000000) /* DDS EOD */ -#define GMT_WR_PROT(x) ((x) & 0x04000000) -/* #define GMT_ ? ((x) & 0x02000000) */ -#define GMT_ONLINE(x) ((x) & 0x01000000) -#define GMT_D_6250(x) ((x) & 0x00800000) -#define GMT_D_1600(x) ((x) & 0x00400000) -#define GMT_D_800(x) ((x) & 0x00200000) -/* #define GMT_ ? ((x) & 0x00100000) */ -/* #define GMT_ ? ((x) & 0x00080000) */ -#define GMT_DR_OPEN(x) ((x) & 0x00040000) /* door open (no tape) */ -/* #define GMT_ ? ((x) & 0x00020000) */ -#define GMT_IM_REP_EN(x) ((x) & 0x00010000) /* immediate report mode */ -#define GMT_CLN(x) ((x) & 0x00008000) /* cleaning requested */ -/* 15 generic status bits unused */ - - -/* SCSI-tape specific definitions */ -/* Bitfield shifts in the status */ -#define MT_ST_BLKSIZE_SHIFT 0 -#define MT_ST_BLKSIZE_MASK 0xffffff -#define MT_ST_DENSITY_SHIFT 24 -#define MT_ST_DENSITY_MASK 0xff000000 - -#define MT_ST_SOFTERR_SHIFT 0 -#define MT_ST_SOFTERR_MASK 0xffff - -/* Bitfields for the MTSETDRVBUFFER ioctl */ -#define MT_ST_OPTIONS 0xf0000000 -#define MT_ST_BOOLEANS 0x10000000 -#define MT_ST_SETBOOLEANS 0x30000000 -#define MT_ST_CLEARBOOLEANS 0x40000000 -#define MT_ST_WRITE_THRESHOLD 0x20000000 -#define MT_ST_DEF_BLKSIZE 0x50000000 -#define MT_ST_DEF_OPTIONS 0x60000000 -#define MT_ST_TIMEOUTS 0x70000000 -#define MT_ST_SET_TIMEOUT (MT_ST_TIMEOUTS | 0x000000) -#define MT_ST_SET_LONG_TIMEOUT (MT_ST_TIMEOUTS | 0x100000) -#define MT_ST_SET_CLN 0x80000000 - -#define MT_ST_BUFFER_WRITES 0x1 -#define MT_ST_ASYNC_WRITES 0x2 -#define MT_ST_READ_AHEAD 0x4 -#define MT_ST_DEBUGGING 0x8 -#define MT_ST_TWO_FM 0x10 -#define MT_ST_FAST_MTEOM 0x20 -#define MT_ST_AUTO_LOCK 0x40 -#define MT_ST_DEF_WRITES 0x80 -#define MT_ST_CAN_BSR 0x100 -#define MT_ST_NO_BLKLIMS 0x200 -#define MT_ST_CAN_PARTITIONS 0x400 -#define MT_ST_SCSI2LOGICAL 0x800 -#define MT_ST_SYSV 0x1000 -#define MT_ST_NOWAIT 0x2000 -#define MT_ST_SILI 0x4000 -#define MT_ST_NOWAIT_EOF 0x8000 - -/* The mode parameters to be controlled. Parameter chosen with bits 20-28 */ -#define MT_ST_CLEAR_DEFAULT 0xfffff -#define MT_ST_DEF_DENSITY (MT_ST_DEF_OPTIONS | 0x100000) -#define MT_ST_DEF_COMPRESSION (MT_ST_DEF_OPTIONS | 0x200000) -#define MT_ST_DEF_DRVBUFFER (MT_ST_DEF_OPTIONS | 0x300000) - -/* The offset for the arguments for the special HP changer load command. */ -#define MT_ST_HPLOADER_OFFSET 10000 - -#endif /* _LINUX_MTIO_H */ -- cgit v1.2.1