Support 2.6.19release-0_7_7-5release-0.7.7-5

7 files changed, 1543 insertions, 148 deletions

diff --git a/src/2.6.19/Makefile.in b/src/2.6.19/Makefile.in
new file mode 100755
index 0000000..0f92ec6
--- /dev/null
+++ b/src/2.6.19/Makefile.in
@@ -0,0 +1,51 @@
+############################ 2.6 kernel compile ###############################
+ifneq ($(KERNELRELEASE),)
+# We were called by kbuild
+# Do NOT indent stuff in this part! It has to be like this to make the
+# $(error ... ) stuff work
+
+ifeq ($(WCM_OPTION_WACOM),yes)
+ifneq ($(CONFIG_USB_WACOM),y)
+wacom-objs := wacom_wac.o wacom_sys.o
+obj-m += wacom.o
+else
+$(error You requested to build wacom with configure, but wacom is configured as built-in in your kernel config)
+endif # CONFIG_USB_WACOM
+endif # WCM_OPTION_WACOM
+
+else  # We were called from command line
+PWD  := $(shell pwd)
+
+KDIR := @WCM_KERNELDIR@
+WCM_OPTION_WACOM := @WCM_OPTION_WACOM@
+
+export WCM_OPTION_WACOM 
+
+all:
+# Copy Wacom specific code which is common to all kernel releases
+ifeq ($(WCM_OPTION_WACOM),yes)
+	cp -f ../2.6.16/wacom_wac.h .
+endif 
+	@echo '    Building linuxwacom drivers for 2.6 kernel.'
+	@echo '***Note: Drivers not enabled as modules in your kernel config but requested through configure are NOT built'
+	$(MAKE) -C $(KDIR) M=$(PWD)
+
+endif  # End kbuild check
+
+######################### Version independent targets ##########################
+
+clean:
+	rm -rf *.o *.ko *.mod.* .[a-z]* core *.i
+
+# also remove copied stuff
+distclean: clean
+	@for i in $(COPY_FROM_KERNEL_TREE); do \
+		if test -f "$$i"; then \
+			rm -f $$i ; \
+		fi; \
+	done
+
+EMPTY_AUTOMAKE_TARGETS = distdir install install-data install-exec uninstall install-info
+EMPTY_AUTOMAKE_TARGETS += installdirs check dvi pdf ps info html tags ctags mostlyclean distclean maintainer-clean
+.PHONY: $(EMPTY_AUTOMAKE_TARGETS)
+	$(EMPTY_AUTOMAKE_TARGETS):
diff --git a/src/2.6.19/wacom.h b/src/2.6.19/wacom.h
new file mode 100755
index 0000000..d85abfc
--- /dev/null
+++ b/src/2.6.19/wacom.h
@@ -0,0 +1,131 @@
+/*
+ * drivers/usb/input/wacom.h
+ *
+ *  USB Wacom Graphire and Wacom Intuos tablet support
+ *
+ *  Copyright (c) 2000-2004 Vojtech Pavlik	<vojtech@ucw.cz>
+ *  Copyright (c) 2000 Andreas Bach Aaen	<abach@stofanet.dk>
+ *  Copyright (c) 2000 Clifford Wolf		<clifford@clifford.at>
+ *  Copyright (c) 2000 Sam Mosel		<sam.mosel@computer.org>
+ *  Copyright (c) 2000 James E. Blair		<corvus@gnu.org>
+ *  Copyright (c) 2000 Daniel Egger		<egger@suse.de>
+ *  Copyright (c) 2001 Frederic Lepied		<flepied@mandrakesoft.com>
+ *  Copyright (c) 2004 Panagiotis Issaris	<panagiotis.issaris@mech.kuleuven.ac.be>
+ *  Copyright (c) 2002-2006 Ping Cheng		<pingc@wacom.com>
+ *
+ *  ChangeLog:
+ *      v0.1 (vp)  - Initial release
+ *      v0.2 (aba) - Support for all buttons / combinations
+ *      v0.3 (vp)  - Support for Intuos added
+ *	v0.4 (sm)  - Support for more Intuos models, menustrip
+ *			relative mode, proximity.
+ *	v0.5 (vp)  - Big cleanup, nifty features removed,
+ *			they belong in userspace
+ *	v1.8 (vp)  - Submit URB only when operating, moved to CVS,
+ *			use input_report_key instead of report_btn and
+ *			other cleanups
+ *	v1.11 (vp) - Add URB ->dev setting for new kernels
+ *	v1.11 (jb) - Add support for the 4D Mouse & Lens
+ *	v1.12 (de) - Add support for two more inking pen IDs
+ *	v1.14 (vp) - Use new USB device id probing scheme.
+ *		     Fix Wacom Graphire mouse wheel
+ *	v1.18 (vp) - Fix mouse wheel direction
+ *		     Make mouse relative
+ *      v1.20 (fl) - Report tool id for Intuos devices
+ *                 - Multi tools support
+ *                 - Corrected Intuos protocol decoding (airbrush, 4D mouse, lens cursor...)
+ *                 - Add PL models support
+ *		   - Fix Wacom Graphire mouse wheel again
+ *	v1.21 (vp) - Removed protocol descriptions
+ *		   - Added MISC_SERIAL for tool serial numbers
+ *	      (gb) - Identify version on module load.
+ *    v1.21.1 (fl) - added Graphire2 support
+ *    v1.21.2 (fl) - added Intuos2 support
+ *                 - added all the PL ids
+ *    v1.21.3 (fl) - added another eraser id from Neil Okamoto
+ *                 - added smooth filter for Graphire from Peri Hankey
+ *                 - added PenPartner support from Olaf van Es
+ *                 - new tool ids from Ole Martin Bjoerndalen
+ *	v1.29 (pc) - Add support for more tablets
+ *		   - Fix pressure reporting
+ *	v1.30 (vp) - Merge 2.4 and 2.5 drivers
+ *		   - Since 2.5 now has input_sync(), remove MSC_SERIAL abuse
+ *		   - Cleanups here and there
+ *    v1.30.1 (pi) - Added Graphire3 support
+ *	v1.40 (pc) - Add support for several new devices, fix eraser reporting, ...
+ *	v1.43 (pc) - Added support for Cintiq 21UX
+ *		   - Fixed a Graphire bug
+ *		   - Merged wacom_intuos3_irq into wacom_intuos_irq
+ *	v1.44 (pc) - Added support for Graphire4, Cintiq 710, Intuos3 6x11, etc.
+ *		   - Report Device IDs
+ *      v1.45 (pc) - Added support for DTF 521, Intuos3 12x12 and 12x19
+ *                 - Minor data report fix
+ *      v1.46 (pc) - Split wacom.c into wacom_sys.c and wacom_wac.c,
+ *		   - where wacom_sys.c deals with system specific code,
+ * 		   - and wacom_wac.c deals with Wacom specific code
+ *		   - Support Intuos3 4x6
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef WACOM_H
+#define WACOM_H
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb/input.h>
+#include <asm/unaligned.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v1.46"
+#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
+#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
+#define DRIVER_LICENSE "GPL"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
+
+#define USB_VENDOR_ID_WACOM	0x056a
+
+struct wacom {
+	dma_addr_t data_dma;
+	struct input_dev *dev;
+	struct usb_device *usbdev;
+	struct urb *irq;
+	struct wacom_wac * wacom_wac;
+	char phys[32];
+};
+
+struct wacom_combo {
+	struct wacom * wacom;
+	struct urb * urb;
+};
+
+extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo);
+extern void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data);
+extern void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data);
+extern void wacom_report_key(void *wcombo, unsigned int key_type, int key_data);
+extern void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value);
+extern void wacom_input_sync(void *wcombo);
+extern void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern __u16 wacom_le16_to_cpu(unsigned char *data);
+extern __u16 wacom_be16_to_cpu(unsigned char *data);
+extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id);
+extern const struct usb_device_id * get_device_table(void);
+
+#endif
diff --git a/src/2.6.19/wacom_sys.c b/src/2.6.19/wacom_sys.c
new file mode 100755
index 0000000..12b4274
--- /dev/null
+++ b/src/2.6.19/wacom_sys.c
@@ -0,0 +1,312 @@
+/*
+ * drivers/usb/input/wacom_sys.c
+ *
+ *  USB Wacom Graphire and Wacom Intuos tablet support - system specific code
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "wacom.h"
+#include "wacom_wac.h"
+
+#define USB_REQ_GET_REPORT	0x01
+#define USB_REQ_SET_REPORT	0x09
+
+static int usb_get_report(struct usb_interface *intf, unsigned char type,
+				unsigned char id, void *buf, int size)
+{
+	return usb_control_msg(interface_to_usbdev(intf),
+		usb_rcvctrlpipe(interface_to_usbdev(intf), 0),
+		USB_REQ_GET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+		(type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber,
+		buf, size, 100);
+}
+
+static int usb_set_report(struct usb_interface *intf, unsigned char type,
+				unsigned char id, void *buf, int size)
+{
+	return usb_control_msg(interface_to_usbdev(intf),
+		usb_sndctrlpipe(interface_to_usbdev(intf), 0),
+                USB_REQ_SET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+                (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber,
+		buf, size, 1000);
+}
+
+static struct input_dev * get_input_dev(struct wacom_combo *wcombo)
+{
+	return wcombo->wacom->dev;
+}
+
+static void wacom_sys_irq(struct urb *urb)
+{
+	struct wacom *wacom = urb->context;
+	struct wacom_combo wcombo;
+	int retval;
+
+	switch (urb->status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+		return;
+	default:
+		dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+		goto exit;
+	}
+
+	wcombo.wacom = wacom;
+	wcombo.urb = urb;
+
+	if (wacom_wac_irq(wacom->wacom_wac, (void *)&wcombo))
+		input_sync(get_input_dev(&wcombo));
+
+ exit:
+	retval = usb_submit_urb (urb, GFP_ATOMIC);
+	if (retval)
+		err ("%s - usb_submit_urb failed with result %d",
+		     __FUNCTION__, retval);
+}
+
+void wacom_report_key(void *wcombo, unsigned int key_type, int key_data)
+{
+	input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data);
+	return;
+}
+
+void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data)
+{
+	input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data);
+	return;
+}
+
+void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data)
+{
+	input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data);
+	return;
+}
+
+void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value)
+{
+	input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value);
+	return;
+}
+
+__u16 wacom_be16_to_cpu(unsigned char *data)
+{
+	__u16 value;
+	value = be16_to_cpu(*(__be16 *) data);
+	return value;
+}
+
+__u16 wacom_le16_to_cpu(unsigned char *data)
+{
+	__u16 value;
+	value = le16_to_cpu(*(__le16 *) data);
+	return value;
+}
+
+void wacom_input_sync(void *wcombo)
+{
+	input_sync(get_input_dev((struct wacom_combo *)wcombo));
+	return;
+}
+
+static int wacom_open(struct input_dev *dev)
+{
+	struct wacom *wacom = dev->private;
+
+	wacom->irq->dev = wacom->usbdev;
+	if (usb_submit_urb(wacom->irq, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void wacom_close(struct input_dev *dev)
+{
+	struct wacom *wacom = dev->private;
+
+	usb_kill_urb(wacom->irq);
+}
+
+void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+	input_dev->evbit[0] |= BIT(EV_MSC);
+	input_dev->mscbit[0] |= BIT(MSC_SERIAL);
+	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
+	input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_4);
+}
+
+void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+	input_dev->evbit[0] |= BIT(EV_REL);
+	input_dev->relbit[0] |= BIT(REL_WHEEL);
+	input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
+	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2);
+	input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0);
+}
+
+void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
+	input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3);
+	input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
+}
+
+void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+	input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
+	input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
+}
+
+void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+	input_dev->evbit[0] |= BIT(EV_MSC) | BIT(EV_REL);
+	input_dev->mscbit[0] |= BIT(MSC_SERIAL);
+	input_dev->relbit[0] |= BIT(REL_WHEEL);
+	input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA);
+	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE)	| BIT(BTN_TOOL_BRUSH)
+		| BIT(BTN_TOOL_PENCIL) | BIT(BTN_TOOL_AIRBRUSH) | BIT(BTN_TOOL_LENS) | BIT(BTN_STYLUS2);
+	input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0);
+	input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0);
+	input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0);
+	input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0);
+	input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0);
+	input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0);
+}
+
+void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER);
+}
+
+void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER);
+}
+
+static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_endpoint_descriptor *endpoint;
+	struct wacom *wacom;
+	struct wacom_wac *wacom_wac;
+	struct input_dev *input_dev;
+	char rep_data[2], limit = 0;
+
+	wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
+	wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!wacom || !input_dev || !wacom_wac)
+		goto fail1;
+
+	wacom_wac->data = usb_buffer_alloc(dev, 10, GFP_KERNEL, &wacom->data_dma);
+	if (!wacom_wac->data)
+		goto fail1;
+
+	wacom->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!wacom->irq)
+		goto fail2;
+
+	wacom->usbdev = dev;
+	wacom->dev = input_dev;
+	usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
+	strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
+
+	wacom_wac->features = get_wacom_feature(id);
+	BUG_ON(wacom_wac->features->pktlen > 10);
+
+	input_dev->name = wacom_wac->features->name;
+	wacom->wacom_wac = wacom_wac;
+	usb_to_input_id(dev, &input_dev->id);
+
+	input_dev->cdev.dev = &intf->dev;
+	input_dev->private = wacom;
+	input_dev->open = wacom_open;
+	input_dev->close = wacom_close;
+
+	input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS);
+	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS);
+	input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0);
+	input_dev->absbit[LONG(ABS_MISC)] |= BIT(ABS_MISC);
+
+	wacom_init_input_dev(input_dev, wacom_wac);
+
+	endpoint = &intf->cur_altsetting->endpoint[0].desc;
+
+	usb_fill_int_urb(wacom->irq, dev,
+			 usb_rcvintpipe(dev, endpoint->bEndpointAddress),
+			 wacom_wac->data, wacom_wac->features->pktlen,
+			 wacom_sys_irq, wacom, endpoint->bInterval);
+	wacom->irq->transfer_dma = wacom->data_dma;
+	wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	input_register_device(wacom->dev);
+
+	/* Ask the tablet to report tablet data. Repeat until it succeeds */
+	do {
+		rep_data[0] = 2;
+		rep_data[1] = 2;
+		usb_set_report(intf, 3, 2, rep_data, 2);
+		usb_get_report(intf, 3, 2, rep_data, 2);
+	} while (rep_data[1] != 2 && limit++ < 5);
+
+	usb_set_intfdata(intf, wacom);
+	return 0;
+
+fail2:	usb_buffer_free(dev, 10, wacom_wac->data, wacom->data_dma);
+fail1:	input_free_device(input_dev);
+	kfree(wacom);
+	kfree(wacom_wac);
+	return -ENOMEM;
+}
+
+static void wacom_disconnect(struct usb_interface *intf)
+{
+	struct wacom *wacom = usb_get_intfdata (intf);
+
+	usb_set_intfdata(intf, NULL);
+	if (wacom) {
+		usb_kill_urb(wacom->irq);
+		input_unregister_device(wacom->dev);
+		usb_free_urb(wacom->irq);
+		usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma);
+		kfree(wacom->wacom_wac);
+		kfree(wacom);
+	}
+}
+
+static struct usb_driver wacom_driver = {
+	.name =		"wacom",
+	.probe =	wacom_probe,
+	.disconnect =	wacom_disconnect,
+};
+
+static int __init wacom_init(void)
+{
+	int result;
+	wacom_driver.id_table = get_device_table();
+	result = usb_register(&wacom_driver);
+	if (result == 0)
+		info(DRIVER_VERSION ":" DRIVER_DESC);
+	return result;
+}
+
+static void __exit wacom_exit(void)
+{
+	usb_deregister(&wacom_driver);
+}
+
+module_init(wacom_init);
+module_exit(wacom_exit);
diff --git a/src/2.6.19/wacom_wac.c b/src/2.6.19/wacom_wac.c
new file mode 100755
index 0000000..21bc041
--- /dev/null
+++ b/src/2.6.19/wacom_wac.c
@@ -0,0 +1,675 @@
+/*
+ * drivers/usb/input/wacom_wac.c
+ *
+ *  USB Wacom Graphire and Wacom Intuos tablet support - Wacom specific code
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include "wacom.h"
+#include "wacom_wac.h"
+
+static int wacom_penpartner_irq(struct wacom_wac *wacom, void *wcombo)
+{
+	unsigned char *data = wacom->data;
+
+	switch (data[0]) {
+		case 1:
+			if (data[5] & 0x80) {
+				wacom->tool[0] = (data[5] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+				wacom->id[0] = (data[5] & 0x20) ? ERASER_DEVICE_ID : STYLUS_DEVICE_ID;
+				wacom_report_key(wcombo, wacom->tool[0], 1);
+				wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */
+				wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
+				wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
+				wacom_report_abs(wcombo, ABS_PRESSURE, (signed char)data[6] + 127);
+				wacom_report_key(wcombo, BTN_TOUCH, ((signed char)data[6] > -127));
+				wacom_report_key(wcombo, BTN_STYLUS, (data[5] & 0x40));
+			} else {
+				wacom_report_key(wcombo, wacom->tool[0], 0);
+				wacom_report_abs(wcombo, ABS_MISC, 0); /* report tool id */
+				wacom_report_abs(wcombo, ABS_PRESSURE, -1);
+				wacom_report_key(wcombo, BTN_TOUCH, 0);
+			}
+			break;
+		case 2:
+			wacom_report_key(wcombo, BTN_TOOL_PEN, 1);
+			wacom_report_abs(wcombo, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */
+			wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
+			wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
+			wacom_report_abs(wcombo, ABS_PRESSURE, (signed char)data[6] + 127);
+			wacom_report_key(wcombo, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20));
+			wacom_report_key(wcombo, BTN_STYLUS, (data[5] & 0x40));
+			break;
+		default:
+			printk(KERN_INFO "wacom_penpartner_irq: received unknown report #%d\n", data[0]);
+			return 0;
+        }
+	return 1;
+}
+
+static int wacom_pl_irq(struct wacom_wac *wacom, void *wcombo)
+{
+	unsigned char *data = wacom->data;
+	int prox, id, pressure;
+
+	if (data[0] != 2) {
+		dbg("wacom_pl_irq: received unknown report #%d", data[0]);
+		return 0;
+	}
+
+	prox = data[1] & 0x40;
+
+	id = ERASER_DEVICE_ID;
+	if (prox) {
+
+		pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1));
+		if (wacom->features->pressure_max > 255)
+			pressure = (pressure << 1) | ((data[4] >> 6) & 1);
+		pressure += (wacom->features->pressure_max + 1) / 2;
+
+		/*
+		 * if going from out of proximity into proximity select between the eraser
+		 * and the pen based on the state of the stylus2 button, choose eraser if
+		 * pressed else choose pen. if not a proximity change from out to in, send
+		 * an out of proximity for previous tool then a in for new tool.
+		 */
+		if (!wacom->tool[0]) {
+			/* Eraser bit set for DTF */
+			if (data[1] & 0x10)
+				wacom->tool[1] = BTN_TOOL_RUBBER;
+			else
+				/* Going into proximity select tool */
+				wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+		} else {
+			/* was entered with stylus2 pressed */
+			if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) {
+				/* report out proximity for previous tool */
+				wacom_report_key(wcombo, wacom->tool[1], 0);
+				wacom_input_sync(wcombo);
+				wacom->tool[1] = BTN_TOOL_PEN;
+				return 0;
+			}
+		}
+		if (wacom->tool[1] != BTN_TOOL_RUBBER) {
+			/* Unknown tool selected default to pen tool */
+			wacom->tool[1] = BTN_TOOL_PEN;
+			id = STYLUS_DEVICE_ID;
+		}
+		wacom_report_key(wcombo, wacom->tool[1], prox); /* report in proximity for tool */
+		wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
+		wacom_report_abs(wcombo, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
+		wacom_report_abs(wcombo, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
+		wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
+
+		wacom_report_key(wcombo, BTN_TOUCH, data[4] & 0x08);
+		wacom_report_key(wcombo, BTN_STYLUS, data[4] & 0x10);
+		/* Only allow the stylus2 button to be reported for the pen tool. */
+		wacom_report_key(wcombo, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20));
+	} else {
+		/* report proximity-out of a (valid) tool */
+		if (wacom->tool[1] != BTN_TOOL_RUBBER) {
+			/* Unknown tool selected default to pen tool */
+			wacom->tool[1] = BTN_TOOL_PEN;
+		}
+		wacom_report_key(wcombo, wacom->tool[1], prox);
+	}
+
+	wacom->tool[0] = prox; /* Save proximity state */
+	return 1;
+}
+
+static int wacom_ptu_irq(struct wacom_wac *wacom, void *wcombo)
+{
+	unsigned char *data = wacom->data;
+	int id;
+
+	if (data[0] != 2) {
+		printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]);
+		return 0;
+	}
+
+	if (data[1] & 0x04) {
+		wacom_report_key(wcombo, BTN_TOOL_RUBBER, data[1] & 0x20);
+		wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x08);
+		id = ERASER_DEVICE_ID;
+	} else {
+		wacom_report_key(wcombo, BTN_TOOL_PEN, data[1] & 0x20);
+		wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01);
+		id = STYLUS_DEVICE_ID;
+	}
+	wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
+	wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+	wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+	wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6]));
+	wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
+	wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
+	return 1;
+}
+
+static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
+{
+	unsigned char *data = wacom->data;
+	int x, y, id, rw;
+
+	if (data[0] != 2) {
+		dbg("wacom_graphire_irq: received unknown report #%d", data[0]);
+		return 0;
+	}
+
+	id = STYLUS_DEVICE_ID;
+	if (data[1] & 0x80) { /* in prox */
+
+		switch ((data[1] >> 5) & 3) {
+
+			case 0:	/* Pen */
+				wacom->tool[0] = BTN_TOOL_PEN;
+				break;
+
+			case 1: /* Rubber */
+				wacom->tool[0] = BTN_TOOL_RUBBER;
+				id = ERASER_DEVICE_ID;
+				break;
+
+			case 2: /* Mouse with wheel */
+				wacom_report_key(wcombo, BTN_MIDDLE, data[1] & 0x04);
+				if (wacom->features->type == WACOM_G4) {
+					rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03);
+					wacom_report_rel(wcombo, REL_WHEEL, -rw);
+				} else
+					wacom_report_rel(wcombo, REL_WHEEL, -(signed char) data[6]);
+				/* fall through */
+
+			case 3: /* Mouse without wheel */
+				wacom->tool[0] = BTN_TOOL_MOUSE;
+				id = CURSOR_DEVICE_ID;
+				wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01);
+				wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02);
+				if (wacom->features->type == WACOM_G4)
+					wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f);
+				else
+					wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f);
+				break;
+		}
+		x = wacom_le16_to_cpu(&data[2]);
+		y = wacom_le16_to_cpu(&data[4]);
+		wacom_report_abs(wcombo, ABS_X, x);
+		wacom_report_abs(wcombo, ABS_Y, y);
+		if (wacom->tool[0] != BTN_TOOL_MOUSE) {
+			wacom_report_abs(wcombo, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8));
+			wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01);
+			wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
+			wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04);
+		}
+		wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
+		wacom_report_key(wcombo, wacom->tool[0], 1);
+	} else if (!(data[1] & 0x90)) {
+		wacom_report_abs(wcombo, ABS_X, 0);
+		wacom_report_abs(wcombo, ABS_Y, 0);
+		if (wacom->tool[0] == BTN_TOOL_MOUSE) {
+			wacom_report_key(wcombo, BTN_LEFT, 0);
+			wacom_report_key(wcombo, BTN_RIGHT, 0);
+			wacom_report_abs(wcombo, ABS_DISTANCE, 0);
+		} else {
+			wacom_report_abs(wcombo, ABS_PRESSURE, 0);
+			wacom_report_key(wcombo, BTN_TOUCH, 0);
+			wacom_report_key(wcombo, BTN_STYLUS, 0);
+			wacom_report_key(wcombo, BTN_STYLUS2, 0);
+		}
+		wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
+		wacom_report_key(wcombo, wacom->tool[0], 0);
+	}
+
+	/* send pad data */
+	if (wacom->features->type == WACOM_G4) {
+		if (data[7] & 0xf8) {
+			wacom_input_sync(wcombo); /* sync last event */
+			wacom->id[1] = 1;
+			wacom->serial[1] = (data[7] & 0xf8);
+			wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
+			wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
+			rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
+			wacom_report_rel(wcombo, REL_WHEEL, rw);
+			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0);
+			wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID);
+			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
+		} else if (wacom->id[1]) {
+			wacom_input_sync(wcombo); /* sync last event */
+			wacom->id[1] = 0;
+			wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
+			wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
+			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0);
+			wacom_report_abs(wcombo, ABS_MISC, 0); 
+			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
+		}
+	}
+	return 1;
+}
+
+static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
+{
+	unsigned char *data = wacom->data;
+	int idx;
+
+	/* tool number */
+	idx = data[1] & 0x01;
+
+	/* Enter report */
+	if ((data[1] & 0xfc) == 0xc0) {
+		/* serial number of the tool */
+		wacom->serial[idx] = ((data[3] & 0x0f) << 28) +
+			(data[4] << 20) + (data[5] << 12) +
+			(data[6] << 4) + (data[7] >> 4);
+
+		wacom->id[idx] = (data[2] << 4) | (data[3] >> 4);
+		switch (wacom->id[idx]) {
+			case 0x812: /* Inking pen */
+			case 0x801: /* Intuos3 Inking pen */
+			case 0x012:
+				wacom->tool[idx] = BTN_TOOL_PENCIL;
+				break;
+			case 0x822: /* Pen */
+			case 0x842:
+			case 0x852:
+			case 0x823: /* Intuos3 Grip Pen */
+			case 0x813: /* Intuos3 Classic Pen */
+			case 0x885: /* Intuos3 Marker Pen */
+			case 0x022:
+				wacom->tool[idx] = BTN_TOOL_PEN;
+				break;
+			case 0x832: /* Stroke pen */
+			case 0x032:
+				wacom->tool[idx] = BTN_TOOL_BRUSH;
+				break;
+			case 0x007: /* Mouse 4D and 2D */
+		        case 0x09c:
+			case 0x094:
+			case 0x017: /* Intuos3 2D Mouse */
+				wacom->tool[idx] = BTN_TOOL_MOUSE;
+				break;
+			case 0x096: /* Lens cursor */
+			case 0x097: /* Intuos3 Lens cursor */
+				wacom->tool[idx] = BTN_TOOL_LENS;
+				break;
+			case 0x82a: /* Eraser */
+			case 0x85a:
+		        case 0x91a:
+			case 0xd1a:
+			case 0x0fa:
+			case 0x82b: /* Intuos3 Grip Pen Eraser */
+			case 0x81b: /* Intuos3 Classic Pen Eraser */
+			case 0x91b: /* Intuos3 Airbrush Eraser */
+				wacom->tool[idx] = BTN_TOOL_RUBBER;
+				break;
+			case 0xd12:
+			case 0x912:
+			case 0x112:
+			case 0x913: /* Intuos3 Airbrush */
+				wacom->tool[idx] = BTN_TOOL_AIRBRUSH;
+				break;
+			default: /* Unknown tool */
+				wacom->tool[idx] = BTN_TOOL_PEN;
+		}
+		return 1;
+	}
+
+	/* Exit report */
+	if ((data[1] & 0xfe) == 0x80) {
+		wacom_report_abs(wcombo, ABS_X, 0);
+		wacom_report_abs(wcombo, ABS_Y, 0);
+		wacom_report_abs(wcombo, ABS_DISTANCE, 0);
+		if (wacom->tool[idx] >= BTN_TOOL_MOUSE) {
+			wacom_report_key(wcombo, BTN_LEFT, 0);
+			wacom_report_key(wcombo, BTN_MIDDLE, 0);
+			wacom_report_key(wcombo, BTN_RIGHT, 0);
+			wacom_report_key(wcombo, BTN_SIDE, 0);
+			wacom_report_key(wcombo, BTN_EXTRA, 0);
+			wacom_report_abs(wcombo, ABS_THROTTLE, 0);
+			wacom_report_abs(wcombo, ABS_RZ, 0);
+ 		} else {
+			wacom_report_abs(wcombo, ABS_PRESSURE, 0);
+			wacom_report_abs(wcombo, ABS_TILT_X, 0);
+			wacom_report_abs(wcombo, ABS_TILT_Y, 0);
+			wacom_report_key(wcombo, BTN_STYLUS, 0);
+			wacom_report_key(wcombo, BTN_STYLUS2, 0);
+			wacom_report_key(wcombo, BTN_TOUCH, 0);
+			wacom_report_abs(wcombo, ABS_WHEEL, 0);
+		}
+		wacom_report_key(wcombo, wacom->tool[idx], 0);
+		wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
+		wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
+		return 2;
+	}
+	return 0;
+}
+
+static void wacom_intuos_general(struct wacom_wac *wacom, void *wcombo)
+{
+	unsigned char *data = wacom->data;
+	unsigned int t;
+
+	/* general pen packet */
+	if ((data[1] & 0xb8) == 0xa0) {
+		t = (data[6] << 2) | ((data[7] >> 6) & 3);
+		wacom_report_abs(wcombo, ABS_PRESSURE, t);
+		wacom_report_abs(wcombo, ABS_TILT_X,
+				((data[7] << 1) & 0x7e) | (data[8] >> 7));
+		wacom_report_abs(wcombo, ABS_TILT_Y, data[8] & 0x7f);
+		wacom_report_key(wcombo, BTN_STYLUS, data[1] & 2);
+		wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 4);
+		wacom_report_key(wcombo, BTN_TOUCH, t > 10);
+	}
+
+	/* airbrush second packet */
+	if ((data[1] & 0xbc) == 0xb4) {
+		wacom_report_abs(wcombo, ABS_WHEEL,
+				(data[6] << 2) | ((data[7] >> 6) & 3));
+		wacom_report_abs(wcombo, ABS_TILT_X,
+				((data[7] << 1) & 0x7e) | (data[8] >> 7));
+		wacom_report_abs(wcombo, ABS_TILT_Y, data[8] & 0x7f);
+	}
+	return;
+}
+
+static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
+{
+	unsigned char *data = wacom->data;
+	unsigned int t;
+	int idx, result;
+
+	if (data[0] != 2 && data[0] != 5 && data[0] != 6 && data[0] != 12) {
+		dbg("wacom_intuos_irq: received unknown report #%d", data[0]);
+                return 0;
+	}
+
+	/* tool number */
+	idx = data[1] & 0x01;
+
+	/* pad packets. Works as a second tool and is always in prox */
+	if (data[0] == 12) {
+		/* initiate the pad as a device */
+		if (wacom->tool[1] != BTN_TOOL_FINGER)
+			wacom->tool[1] = BTN_TOOL_FINGER;
+
+		wacom_report_key(wcombo, BTN_0, (data[5] & 0x01));
+		wacom_report_key(wcombo, BTN_1, (data[5] & 0x02));
+		wacom_report_key(wcombo, BTN_2, (data[5] & 0x04));
+		wacom_report_key(wcombo, BTN_3, (data[5] & 0x08));
+		wacom_report_key(wcombo, BTN_4, (data[6] & 0x01));
+		wacom_report_key(wcombo, BTN_5, (data[6] & 0x02));
+		wacom_report_key(wcombo, BTN_6, (data[6] & 0x04));
+		wacom_report_key(wcombo, BTN_7, (data[6] & 0x08));
+		wacom_report_abs(wcombo, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
+		wacom_report_abs(wcombo, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
+
+		if((data[5] & 0x0f) | (data[6] & 0x0f) | (data[1] & 0x1f) |
+			data[2] | (data[3] & 0x1f) | data[4])
+			wacom_report_key(wcombo, wacom->tool[1], 1);
+		else
+			wacom_report_key(wcombo, wacom->tool[1], 0);
+		wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID); 
+		wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xffffffff);
+                return 1;
+	}
+
+	/* process in/out prox events */
+	result = wacom_intuos_inout(wacom, wcombo);
+	if (result)
+                return result-1;
+
+	/* Only large I3 and I1 & I2 support Lense Cursor */
+ 	if((wacom->tool[idx] == BTN_TOOL_LENS) 
+			&& ((wacom->features->type == INTUOS3) 
+		 	|| (wacom->features->type == INTUOS3S)))
+		return 0;
+
+	/* Cintiq doesn't send data when RDY bit isn't set */
+	if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40))
+                 return 0;
+
+	if (wacom->features->type >= INTUOS3S) {
+		wacom_report_abs(wcombo, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
+		wacom_report_abs(wcombo, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1));
+		wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 2) & 0x3f));
+	} else {
+		wacom_report_abs(wcombo, ABS_X, wacom_be16_to_cpu(&data[2]));
+		wacom_report_abs(wcombo, ABS_Y, wacom_be16_to_cpu(&data[4]));
+		wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 3) & 0x1f));
+	}
+
+	/* process general packets */
+	wacom_intuos_general(wacom, wcombo);
+
+	/* 4D mouse, 2D mouse, marker pen rotation, or Lens cursor packets */
+	if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0) {
+
+		if (data[1] & 0x02) {
+			/* Rotation packet */
+			if (wacom->features->type >= INTUOS3S) {
+				/* I3 marker pen rotation reported as wheel
+				 * due to valuator limitation
+				 */
+				t = (data[6] << 3) | ((data[7] >> 5) & 7);
+				t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) :
+					((t-1) / 2 + 450)) : (450 - t / 2) ;
+				wacom_report_abs(wcombo, ABS_WHEEL, t);
+			} else {
+				/* 4D mouse rotation packet */
+				t = (data[6] << 3) | ((data[7] >> 5) & 7);
+				wacom_report_abs(wcombo, ABS_RZ, (data[7] & 0x20) ?
+					((t - 1) / 2) : -t / 2);
+			}
+
+		} else if (!(data[1] & 0x10) && wacom->features->type < INTUOS3S) {
+			/* 4D mouse packet */
+			wacom_report_key(wcombo, BTN_LEFT,   data[8] & 0x01);
+			wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02);
+			wacom_report_key(wcombo, BTN_RIGHT,  data[8] & 0x04);
+
+			wacom_report_key(wcombo, BTN_SIDE,   data[8] & 0x20);
+			wacom_report_key(wcombo, BTN_EXTRA,  data[8] & 0x10);
+			t = (data[6] << 2) | ((data[7] >> 6) & 3);
+			wacom_report_abs(wcombo, ABS_THROTTLE, (data[8] & 0x08) ? -t : t);
+
+		} else if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
+			/* 2D mouse packet */
+			wacom_report_key(wcombo, BTN_LEFT,   data[8] & 0x04);
+			wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x08);
+			wacom_report_key(wcombo, BTN_RIGHT,  data[8] & 0x10);
+			wacom_report_rel(wcombo, REL_WHEEL, (data[8] & 0x01)
+						 - ((data[8] & 0x02) >> 1));
+
+			/* I3 2D mouse side buttons */
+			if (wacom->features->type >= INTUOS3S && wacom->features->type <= INTUOS3L) {
+				wacom_report_key(wcombo, BTN_SIDE,   data[8] & 0x40);
+				wacom_report_key(wcombo, BTN_EXTRA,  data[8] & 0x20);
+			}
+
+		} else if (wacom->features->type < INTUOS3S || wacom->features->type == INTUOS3L) {
+			/* Lens cursor packets */
+			wacom_report_key(wcombo, BTN_LEFT,   data[8] & 0x01);
+			wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02);
+			wacom_report_key(wcombo, BTN_RIGHT,  data[8] & 0x04);
+			wacom_report_key(wcombo, BTN_SIDE,   data[8] & 0x10);
+			wacom_report_key(wcombo, BTN_EXTRA,  data[8] & 0x08);
+		}
+	}
+
+	wacom_report_abs(wcombo, ABS_MISC, wacom->id[idx]); /* report tool id */
+	wacom_report_key(wcombo, wacom->tool[idx], 1);
+	wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
+	return 1;
+}
+
+int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
+{
+	switch (wacom_wac->features->type) {
+		case PENPARTNER:
+			return (wacom_penpartner_irq(wacom_wac, wcombo));
+			break;
+		case PL:
+			return (wacom_pl_irq(wacom_wac, wcombo));
+			break;
+		case WACOM_G4:
+		case GRAPHIRE:
+			return (wacom_graphire_irq(wacom_wac, wcombo));
+			break;
+		case PTU:
+			return (wacom_ptu_irq(wacom_wac, wcombo));
+			break;
+		case INTUOS:
+		case INTUOS3S:
+		case INTUOS3:
+		case INTUOS3L:
+		case CINTIQ:
+			return (wacom_intuos_irq(wacom_wac, wcombo));
+			break;
+		default:
+			return 0;
+	}
+	return 0;
+}
+
+void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+	switch (wacom_wac->features->type) {
+		case WACOM_G4:
+			input_dev_g4(input_dev, wacom_wac);
+			/* fall through */
+		case GRAPHIRE:
+			input_dev_g(input_dev, wacom_wac);
+			break;
+		case INTUOS3:
+		case INTUOS3L:
+		case CINTIQ:
+			input_dev_i3(input_dev, wacom_wac);
+			/* fall through */
+		case INTUOS3S:
+			input_dev_i3s(input_dev, wacom_wac);
+		case INTUOS:
+			input_dev_i(input_dev, wacom_wac);
+			break;
+		case PL:
+		case PTU:
+			input_dev_pl(input_dev, wacom_wac);
+			break;
+		case PENPARTNER:
+			input_dev_pt(input_dev, wacom_wac);
+			break;
+	}
+	return;
+}
+
+static struct wacom_features wacom_features[] = {
+	{ "Wacom Penpartner",    7,   5040,  3780,  255,  0, PENPARTNER },
+        { "Wacom Graphire",      8,  10206,  7422,  511, 63, GRAPHIRE },
+	{ "Wacom Graphire2 4x5", 8,  10206,  7422,  511, 63, GRAPHIRE },
+	{ "Wacom Graphire2 5x7", 8,  13918, 10206,  511, 63, GRAPHIRE },
+	{ "Wacom Graphire3",     8,  10208,  7424,  511, 63, GRAPHIRE },
+	{ "Wacom Graphire3 6x8", 8,  16704, 12064,  511, 63, GRAPHIRE },
+	{ "Wacom Graphire4 4x5", 8,  10208,  7424,  511, 63, WACOM_G4 },
+	{ "Wacom Graphire4 6x8", 8,  16704, 12064,  511, 63, WACOM_G4 },
+	{ "Wacom Volito",        8,   5104,  3712,  511, 63, GRAPHIRE },
+	{ "Wacom PenStation2",   8,   3250,  2320,  255, 63, GRAPHIRE },
+	{ "Wacom Volito2 4x5",   8,   5104,  3712,  511, 63, GRAPHIRE },
+	{ "Wacom Volito2 2x3",   8,   3248,  2320,  511, 63, GRAPHIRE },
+	{ "Wacom PenPartner2",   8,   3250,  2320,  255, 63, GRAPHIRE },
+	{ "Wacom Intuos 4x5",   10,  12700, 10600, 1023, 31, INTUOS },
+	{ "Wacom Intuos 6x8",   10,  20320, 16240, 1023, 31, INTUOS },
+	{ "Wacom Intuos 9x12",  10,  30480, 24060, 1023, 31, INTUOS },
+	{ "Wacom Intuos 12x12", 10,  30480, 31680, 1023, 31, INTUOS },
+	{ "Wacom Intuos 12x18", 10,  45720, 31680, 1023, 31, INTUOS },
+	{ "Wacom PL400",         8,   5408,  4056,  255,  0, PL },
+	{ "Wacom PL500",         8,   6144,  4608,  255,  0, PL },
+	{ "Wacom PL600",         8,   6126,  4604,  255,  0, PL },
+	{ "Wacom PL600SX",       8,   6260,  5016,  255,  0, PL },
+	{ "Wacom PL550",         8,   6144,  4608,  511,  0, PL },
+	{ "Wacom PL800",         8,   7220,  5780,  511,  0, PL },
+	{ "Wacom PL700",         8,   6758,  5406,  511,  0, PL },
+	{ "Wacom PL510",         8,   6282,  4762,  511,  0, PL },
+	{ "Wacom DTU710",        8,  34080, 27660,  511,  0, PL },
+	{ "Wacom DTF521",        8,   6282,  4762,  511,  0, PL },
+	{ "Wacom DTF720",        8,   6858,  5506,  511,  0, PL },
+	{ "Wacom Cintiq Partner",8,  20480, 15360,  511,  0, PTU },
+	{ "Wacom Intuos2 4x5",   10, 12700, 10600, 1023, 31, INTUOS },
+	{ "Wacom Intuos2 6x8",   10, 20320, 16240, 1023, 31, INTUOS },
+	{ "Wacom Intuos2 9x12",  10, 30480, 24060, 1023, 31, INTUOS },
+	{ "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 31, INTUOS },
+	{ "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 31, INTUOS },
+	{ "Wacom Intuos3 4x5",   10, 25400, 20320, 1023, 63, INTUOS3S },
+	{ "Wacom Intuos3 6x8",   10, 40640, 30480, 1023, 63, INTUOS3 },
+	{ "Wacom Intuos3 9x12",  10, 60960, 45720, 1023, 63, INTUOS3 },
+	{ "Wacom Intuos3 12x12", 10, 60960, 60960, 1023, 63, INTUOS3L },
+	{ "Wacom Intuos3 12x19", 10, 97536, 60960, 1023, 63, INTUOS3L },
+	{ "Wacom Intuos3 6x11",  10, 54204, 31750, 1023, 63, INTUOS3 },
+	{ "Wacom Intuos3 4x6",   10, 31496, 19685, 1023, 63, INTUOS3S },
+	{ "Wacom Cintiq 21UX",   10, 87200, 65600, 1023, 63, CINTIQ },
+	{ "Wacom Intuos2 6x8",   10, 20320, 16240, 1023, 31, INTUOS },
+	{ }
+};
+
+static struct usb_device_id wacom_ids[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x00) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x10) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x11) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x12) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x13) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x15) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x23) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x24) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x30) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x31) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x32) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x33) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x34) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x35) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC4) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x43) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x44) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x45) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB3) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB4) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB7) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
+	{ }
+};
+
+const struct usb_device_id * get_device_table(void) {
+        const struct usb_device_id * id_table = wacom_ids;
+        return id_table;
+}
+
+struct wacom_features * get_wacom_feature(const struct usb_device_id * id) {
+        int index = id - wacom_ids;
+        struct wacom_features *wf = &wacom_features[index];
+        return wf;
+}
+
+MODULE_DEVICE_TABLE(usb, wacom_ids);
diff --git a/src/include/wcmAction.h b/src/include/wcmAction.h
deleted file mode 100644
index 8166311..0000000
--- a/src/include/wcmAction.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*****************************************************************************
-** wcmAction.h
-**
-** Copyright (C) 2006 - Andrew Zabolotny
-**
-** This program is free software; you can redistribute it and/or
-** modify it under the terms of the GNU General Public License
-** as published by the Free Software Foundation; either version 2
-** of the License, or (at your option) any later version.
-**
-** This program is distributed in the hope that it will be useful,
-** but WITHOUT ANY WARRANTY; without even the implied warranty of
-** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-** GNU Lesser General Public License for more details.
-**
-** You should have received a copy of the GNU General Public License
-** along with this program; if not, write to the Free Software
-** Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-**
-** REVISION HISTORY
-**   2006-07-17 0.0.1 - Initial release
-*/
-
-/* This pseudo-header file is included both from the X11 driver, and from
- * tools (notably xsetwacom). The reason is to have the function defined
- * in one place, to avoide desyncronization issues between two pieces of
- * almost identical code.
- */
-
-#ifndef WCMACTION_X11_DRIVER
-#  define xf86Msg   fprintf
-#  define X_ERROR   stderr
-#  define X_WARNING stderr
-#endif
-
-static int xf86WcmDecodeAction (const char *dev, const char *but, const char *ev)
-{
-	static struct
-	{
-		const char *keyword;
-		unsigned mask;
-		unsigned ent_mask;
-	} action_flags [] =
-	{
-		{ "CORE",       AC_CORE,       AC_CORE    },
-		{ "KEY",        AC_KEY,        AC_TYPE    },
-		{ "BUTTON",     AC_BUTTON,     AC_TYPE    },
-		{ "MODETOGGLE", AC_MODETOGGLE, AC_TYPE    },
-		{ "DBLCLICK",   AC_DBLCLICK,   AC_TYPE    },
-		{ "SHIFT",      AC_SHIFT,      AC_SHIFT   },
-		{ "CONTROL",    AC_CONTROL,    AC_CONTROL },
-		{ "CTRL",       AC_CONTROL,    AC_CONTROL },
-		{ "META",       AC_META,       AC_META    },
-		{ "ALT",        AC_ALT,        AC_ALT     },
-		{ "SUPER",      AC_SUPER,      AC_SUPER   },
-		{ "HYPER",      AC_HYPER,      AC_HYPER   },
-	};
-
-	int i, butev = 0, entev = 0;
-	const char *orig_ev = ev;
-	char tmp [128];
-
-	for (;;)
-	{
-		while (*ev == ' ' || *ev == '\t')
-			ev++;
-
-		for (i = 0; i < sizeof (action_flags) / sizeof (action_flags [0]); i++)
-		{
-			int sl = strlen (action_flags [i].keyword);
-			if ((ev [sl] == 0 || ev [sl] == ' ' || ev [sl] == '\t') &&
-			    !strncasecmp (ev, action_flags [i].keyword, sl))
-			{
-				if (entev & action_flags [i].ent_mask)
-				{
-					size_t tmpsl = ev - orig_ev;
-					if (tmpsl >= sizeof (tmp))
-						tmpsl = sizeof (tmp) - 1;
-					memcpy (tmp, orig_ev, tmpsl);
-                                        tmp [tmpsl] = 0;
-					xf86Msg (X_WARNING,
-						 "%s: conflicting flags for %s: \"%s<<%s>>%s\"!\n",
-						 dev, but, tmp, action_flags [i].keyword, ev + sl);
-				}
-				butev = (butev & ~action_flags [i].ent_mask) |
-					action_flags [i].mask;
-				entev |= action_flags [i].ent_mask;
-				ev += sl;
-				break;
-			}
-		}
-
-		if (i >= sizeof (action_flags) / sizeof (action_flags [0]))
-			break;
-	}
-
-	if (*ev)
-	{
-		char *end;
-		int n = strtol (ev, &end, 0);
-		if (n && end != ev)
-		{
-			/**
-			 * No protection against (n & ~AC_CODE) != 0
-			 * This is done intentionally so that you can use
-			 * plain numerical values to assign a whole action
-			 * at once; this is useful e.g. for saving/restoring
-			 * button configs.
-			 */
-			butev |= n;
-			ev = end;
-		}
-#ifndef WCMACTION_X11_DRIVER
-		else
-		{
-			const char *end = ev + strcspn (ev, " \t");
-			i = end - ev;
-			if (i >= sizeof (tmp))
-				i = sizeof (tmp) - 1;
-			memcpy (tmp, ev, i);
-			tmp [i] = 0;
-			n = XStringToKeysym (tmp);
-			if (n)
-			{
-				butev = (butev & ~AC_CODE) | (n & AC_CODE);
-				ev = end;
-			}
-		}
-#endif
-	}
-
-	while (*ev == ' ' || *ev == '\t')
-		ev++;
-
-	if (*ev)
-	{
-		size_t tmpsl = ev - orig_ev;
-		if (tmpsl >= sizeof (tmp))
-			tmpsl = sizeof (tmp) - 1;
-		memcpy (tmp, orig_ev, tmpsl);
-		tmp [tmpsl] = 0;
-		xf86Msg (X_ERROR, "%s: invalid %s value: \"%s<<%s>>\"!\n",
-			 dev, but, tmp, ev);
-		return 0;
-	}
-
-	return butev;
-}
diff --git a/src/util/wcmAction.c b/src/util/wcmAction.c
new file mode 100755
index 0000000..433177a
--- /dev/null
+++ b/src/util/wcmAction.c
@@ -0,0 +1,332 @@
+/*****************************************************************************
+** wcmAction.c
+**
+** Copyright (C) 2007 - Ping Cheng
+**
+** This program is free software; you can redistribute it and/or
+** modify it under the terms of the GNU General Public License
+** as published by the Free Software Foundation; either version 2
+** of the License, or (at your option) any later version.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+** GNU Lesser General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+**
+** REVISION HISTORY
+**   2007-02-06 0.0.1-pc - Support keystrokes
+*/
+
+/* This pseudo-header file is included both from the X11 driver, and from
+ * tools (notably xsetwacom). The reason is to have the function defined
+ * in one place, to avoide desyncronization issues between two pieces of
+ * almost identical code.
+ */
+
+#include "../include/Xwacom.h" 
+#include "wcmAction.h"
+#include <stdio.h>
+#include <string.h>
+#include <ctype.h>
+#include <stdlib.h>
+#include <X11/Xlib.h>
+
+static ACTIONCODE action_code [] =
+{
+	{ "CORE",       AC_CORE },
+	{ "KEY",        AC_KEY },
+	{ "BUTTON",     AC_BUTTON },
+	{ "MODETOGGLE", AC_MODETOGGLE },
+	{ "DBLCLICK",   AC_DBLCLICK }
+};
+
+static ACTIONCODE modifier_code [] =
+{
+	{ "SHIFT",      XK_Shift_L },
+	{ "CTRL",       XK_Control_L },
+	{ "CONTROL",    XK_Control_L },
+	{ "META",       XK_Meta_L },
+	{ "ALT",        XK_Alt_L },
+	{ "SUPER",      XK_Super_L },
+	{ "HYPER",      XK_Hyper_L },
+	{ "F1",		XK_F1 },
+	{ "F2",		XK_F2 },
+	{ "F3",		XK_F3 },
+	{ "F4",		XK_F4 },
+	{ "F5",		XK_F5 },
+	{ "F6",		XK_F6 },
+	{ "F7",		XK_F7 },
+	{ "F8",		XK_F8 },
+	{ "F9",		XK_F9 },
+	{ "F10",	XK_F10 },
+	{ "F11",	XK_F11 },
+	{ "F12",	XK_F12 },
+	{ "Esc",	XK_Escape },
+	{ "Tab",	XK_Tab },
+	{ "CapsLock",	XK_Caps_Lock },
+	{ "Pause",	XK_Pause },
+	{ "ScrollLock",	XK_Scroll_Lock },
+	{ "SysReq",	XK_Sys_Req },
+	{ "Home",	XK_Home },
+	{ "PgUp",	XK_Page_Up },
+	{ "PageUp",	XK_Page_Up },
+	{ "PgDn",	XK_Page_Down },
+	{ "PageDown",	XK_Page_Down },
+	{ "End",	XK_End },
+	{ "Insert",	XK_Insert },
+	{ "Ins",	XK_Insert },
+	{ "Delete",	XK_Delete },
+	{ "Del",	XK_Delete },
+	{ "Left",	XK_Left },
+	{ "Up",		XK_Up },
+	{ "Down",	XK_Down },
+	{ "Right",	XK_Right },
+	{ "BackSpace",	XK_BackSpace },
+	{ "Enter",	XK_Return },
+	{ "NumLock",	XK_Num_Lock }
+};
+
+static ACTIONCODE specific_code [] =
+{
+	{ "space",	XK_space },
+	{ "quotedbl",   XK_quotedbl },
+	{ "backslash",  XK_backslash },
+	{ "exclam",	XK_exclam }
+};
+
+static ACTIONCODE key_code [] =
+{
+	{ "#",	XK_numbersign },
+	{ "$",	XK_dollar },
+	{ "%",	XK_percent },
+	{ "&",	XK_ampersand },
+	{ "'",	XK_quoteright },
+	{ "(",	XK_parenleft },
+	{ ")",	XK_parenright },
+	{ "*",	XK_asterisk },
+	{ "+",	XK_plus },
+	{ ",",	XK_comma },
+	{ "-",	XK_minus },
+	{ ".",	XK_period },
+	{ "/",	XK_slash },
+	{ ":",	XK_colon },
+	{ ";",	XK_semicolon },
+	{ "<",	XK_less },
+	{ "=",	XK_equal },
+	{ ">",	XK_greater },
+	{ "?",	XK_question },
+	{ "@",	XK_at },
+	{ "[",	XK_bracketleft },
+	{ "]",	XK_bracketright },
+	{ "^",	XK_asciicircum },
+	{ "_",	XK_underscore },
+	{ "`",	XK_grave },
+	{ "{",	XK_braceleft },
+	{ "}",	XK_braceright },
+	{ "|",	XK_bar },
+	{ "~",	XK_asciitilde}
+};
+
+static ACTIONCODE number_code [] =
+{
+	{ "0",	XK_0 },
+	{ "1",	XK_1 },
+	{ "2",	XK_2 },
+	{ "3",	XK_3 },
+	{ "4",	XK_4 },
+	{ "5",	XK_5 },
+	{ "6",	XK_6 },
+	{ "7",	XK_7 },
+	{ "8",	XK_8 },
+	{ "9",	XK_9 },
+
+};
+
+void xf86WcmDecodeKey(const char *dev, const char *but, char *ev, unsigned * entev, ACTIONCODE * code, int codesize, int * butev)
+{
+    int i, num_keys = ((*butev) & AC_NUM_KEYS) >> 20;
+    char keys[2] = " ";
+    int n = 0;
+    keys[0] = ev[0];
+    if (code)
+    {
+	for (i = 0; i < codesize; i++)
+	{
+	    if (keys[0] == code[i].keyword[0])
+		n = code[i].value;
+	}
+    }
+    else
+	n = XStringToKeysym (keys);
+
+    if (n)
+	entev[num_keys++] =  n;
+    *butev = ((*butev) & AC_EVENT) | (num_keys << 20) 
+		| (num_keys ? entev[0] : 0);
+}
+
+char * xf86WcmDecodeWord(const char *dev, const char *but, char *ev, unsigned * entev, ACTIONCODE * code, int codesize, int * butev)
+{
+    int i, num_keys = ((*butev) & AC_NUM_KEYS) >> 20;
+    for (;;)
+    {
+	while (ev && (*ev == ' ' || *ev == '\t'))
+	    ev++;
+
+	for (i = 0; i < codesize; i++)
+	{
+	    int sl = strlen (code [i].keyword);
+	    if ( (strlen(ev) >= sl) &&
+		(ev [sl] == 0 || ev [sl] == ' ' || ev [sl] == '\t') &&
+			!strncasecmp (ev, code [i].keyword, sl))
+	    {
+		if (code [i].value & AC_CODE)
+		    entev[num_keys++] =  code [i].value;
+		else
+		    (*butev) |= code [i].value;
+				
+		ev += sl;
+		if (!strlen(ev)) 
+		    i = codesize;
+		break;
+	    }
+	}
+
+	if (i >= codesize)
+	    break;
+    }
+    *butev = ((*butev) & AC_EVENT) | (num_keys << 20) 
+		| (num_keys ? entev[0] : 0);
+    return ev;
+}
+
+int xf86WcmDecode (const char *dev, const char *but, const char *ev, unsigned * entev)
+{
+    int butev = 0, 
+	codesize = sizeof (action_code) / sizeof (action_code [0]), 
+	num_keys = (butev & AC_NUM_KEYS) >> 20;
+    char new_ev[256] ="", *ev_p;
+
+    strcat(new_ev, ev);
+    ev_p = new_ev;
+    if (!strlen(ev)) 
+    {
+	printf("xf86WcmDecodeAction No action defined\n");
+	return 0;
+    }
+
+    ev_p = xf86WcmDecodeWord(dev, but, new_ev, entev, action_code, codesize, &butev);
+    switch (butev & AC_TYPE)
+    {
+	case AC_BUTTON:
+	    if (strlen(ev_p))
+	    {
+		char *end;
+		int n = strtol (ev_p, &end, 0);
+		butev |= n;
+	    }
+	    if (!(butev & AC_CODE))
+		printf ("xf86WcmDecode %s: invalid %s value: button (%x) \"%s\"\n",
+			dev, but, butev, ev);
+	case AC_MODETOGGLE:
+	case AC_DBLCLICK:
+	    return butev;
+	case AC_KEY:
+	    if (!strlen(ev_p))
+	    {
+		printf ("xf86WcmDecode %s: invalid %s value: button has no key defined.\n", dev, but);
+		return 0;
+	    }
+	    codesize = sizeof (modifier_code) / sizeof (modifier_code [0]);
+	    ev_p = xf86WcmDecodeWord(dev, but, ev_p, entev, modifier_code, codesize, &butev);
+	    codesize = sizeof (specific_code) / sizeof (specific_code [0]);
+	    ev_p = xf86WcmDecodeWord(dev, but, ev_p, entev, specific_code, codesize, &butev);
+
+	    while(strlen(ev_p))
+	    {
+		if (ev_p[0] == ' ')
+		{
+		    ev_p++;
+		    codesize = sizeof (specific_code) / sizeof (specific_code [0]);
+		    ev_p = xf86WcmDecodeWord(dev, but, ev_p, entev, specific_code, codesize, &butev);
+		}
+		codesize = sizeof (key_code) / sizeof (key_code [0]);
+		num_keys = (butev & AC_NUM_KEYS) >> 20;
+		xf86WcmDecodeKey(dev, but, ev_p, entev, key_code, codesize, &butev);
+		if (num_keys == ((butev & AC_NUM_KEYS) >> 20))
+		{
+		    codesize = sizeof (number_code) / sizeof (number_code [0]);
+		    xf86WcmDecodeKey(dev, but, ev_p, entev, number_code, codesize, &butev);
+		    if (num_keys == ((butev & AC_NUM_KEYS) >> 20))
+			xf86WcmDecodeKey(dev, but, ev_p, entev, 0, 1, &butev);
+		}
+		ev_p++;
+	    }
+    }
+    return butev;
+}
+
+int xf86WcmListMod(char** argv)
+{
+    int modsize = sizeof (modifier_code) / sizeof (modifier_code [0]), i;
+    if (*argv != NULL)
+	fprintf(stderr,"ListMod: Ignoring extraneous arguments (%s).\n", *argv);
+
+    fprintf(stderr,"ListMod: %d modifiers are supported:\n\n", modsize);
+    for (i=0; i<modsize; i++)
+	fprintf(stderr,"\t%s\n", modifier_code[i].keyword);
+
+    modsize = sizeof (specific_code) / sizeof (specific_code [0]);
+    fprintf(stderr,"\n\nListMod: %d specific keys are supported. "
+	"For example: to send \", you need to use quotedbl:\n\n", modsize);
+    for (i=0; i<modsize; i++)
+	fprintf(stderr,"\t%s\n", specific_code[i].keyword);
+
+    return 0;
+}
+
+int xf86WcmGetString(unsigned keySym, char * kstring)
+{
+    int i = 0;
+
+    kstring[0] = 0;
+    for (i=0; i<sizeof (action_code) / sizeof (action_code [0]); i++)
+	if (action_code[i].value == keySym)
+	{
+	    strcat(kstring, action_code[i].keyword);
+	    return 1;
+	}	
+    for (i=0; i<sizeof (modifier_code) / sizeof (modifier_code [0]); i++)
+	if (modifier_code[i].value == keySym)
+	{
+	    strcat(kstring, modifier_code[i].keyword);
+	    return 1;
+	}	
+	
+    for (i=0; i<sizeof (specific_code) / sizeof (specific_code [0]); i++)
+	if (specific_code[i].value == keySym)
+	{
+	    strcat(kstring, specific_code[i].keyword);
+	    return 1;
+	}	
+
+    for (i=0; i<sizeof (key_code) / sizeof (key_code [0]); i++)
+	if (key_code[i].value == keySym)
+	{
+	    strcat(kstring, key_code[i].keyword);
+	    return 1;
+	}	
+
+    for (i=0; i<sizeof (number_code) / sizeof (number_code [0]); i++)
+	if (number_code[i].value == keySym)
+	{
+	    strcat(kstring, number_code[i].keyword);
+	    return 1;
+	}
+    strcat(kstring, XKeysymToString((KeySym)keySym));
+    return 1;
+}
diff --git a/src/util/wcmAction.h b/src/util/wcmAction.h
new file mode 100755
index 0000000..1c84870
--- /dev/null
+++ b/src/util/wcmAction.h
@@ -0,0 +1,42 @@
+/*****************************************************************************
+** wcmAction.h
+**
+** Copyright (C) 2006 - Andrew Zabolotny
+**
+** This program is free software; you can redistribute it and/or
+** modify it under the terms of the GNU General Public License
+** as published by the Free Software Foundation; either version 2
+** of the License, or (at your option) any later version.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+** GNU Lesser General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+**
+** REVISION HISTORY
+**   2006-07-17 0.0.1-az - Initial release
+*/
+
+/* This pseudo-header file is included both from the X11 driver, and from
+ * tools (notably xsetwacom). The reason is to have the function defined
+ * in one place, to avoide desyncronization issues between two pieces of
+ * almost identical code.
+ */
+
+#include "../include/Xwacom.h" 
+
+typedef struct _ACTIONCODE ACTIONCODE;
+
+struct _ACTIONCODE
+{
+	const char *keyword;
+	unsigned value;
+};
+
+int xf86WcmDecode (const char *dev, const char *but, const char *ev, unsigned * entev);
+int xf86WcmListMod(char** argv);
+int xf86WcmGetString(unsigned keySym, char * kstring);